The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ribbon Cable Connector HIF4 Series Features 1. Current Capacity The HIF4 series connector is capable of 3 A current capacity used for wider applications, while the HIF3 series uses 1 A capacity. 2. Full Lock Mechanism This connector is equipped with a Hirose original locking mechanism, and guarantees excellent reliability for vibration and shock. 3. One-touch Insertion and Extraction Mechanism This connector is equipped with levers for automatic insertion and extraction, as soon as lock is reset. Insertion and extraction tools are not required. 4. Applicable Cable The applicable cable is UL2651 AWG#24 flat cable (7 cores./0.203mm, jacket dia :1.0 to 1.2mm). Applications Computers, terminal equipment, various kinds of electronic equipment, and office automation machines Product Specifications Current rating : 3A Rating Operating Temperature Range : -55 to +85c (Note 1) Storage Temperature Range : -10 to +60c (Note 2) Storage Humidity Range : 40 to 70% (Note 2) Voltage rating : 300V AC Operating Moisture Range : 40 to 80% Item Specification 1. Insulation Resistance Condition 1000M ohms min 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 1000V AC/1 minute 3. Contact Resistance 15m ohms max 0.1A 4. Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 6. Temperature Cycle No damage, cracks, or parts looseness. 7. Operating Life Contact resistance: 15m ohms max. 96 hours at temperature of 40c and humidity of 90% to 95% (-65c: 30 minutes 15 to 35c: 5 minutes max. 125c: 30 minutes 15 to 35c: 5 minutes max.) 5 cycles 500 cycles 8. Resistance to Soldering heat No deformation of components affecting performance. Solder bath: 260c for 10 seconds Manual soldering: 360c for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for a specific part number shown. Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside. Material Part Material Insulator Contact B2 Finish Remarks UL94V-0 PBT Black Socket Beryllium copper Gold plated over nickel underplating Pin header Phosphor bronze Gold plated over nickel underplating ------- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your HiroseConnector sales representative. HIF4 SeriesRibbon Cable Ordering Information Pin Header HIF4 - * P - 3.18 DS q w e q Series Name r t : HIF4 w Number of Contacts : 16, 20, 26, 34, 40 e Contact alignment : P : Pin header r Contact Pitch : 3.18mm t Contact Type DS : Right angle type SA : Straight dip type W : Wrapping type Socket HIF4 - * D - 3.18 R q w e q Series Name r t : HIF4 w Number of Contacts : 16, 20, 26, 34, 40 e Contact alignment : D : Double r Contact Pitch : 3.18mm t Connection type : Ribbon cable B3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HIF4 SeriesRibbon Cable Connector Socket Unit:mm Part Number CL No. Number of Contacts A B C HIF4-16D-3.18R 563-0025-5 16 31.98 22.26 26.28 RoHS HIF4-20D-3.18R 563-0010-8 20 38.34 28.62 32.64 HIF4-26D-3.18R 563-0011-0 26 47.88 38.16 42.18 HIF4-34D-3.18R 563-0012-3 34 60.60 50.88 54.90 HIF4-40D-3.18R 563-0029-6 40 70.14 60.42 64.44 YES Pin Header Right Angle Type Unit:mm B4 Part Number CL No. Number of Contacts A B C D E F HIF4-16P-3.18DS 563-0026-8 16 46.68 32.18 22.26 39.98 33.58 HIF4-20P-3.18DS 563-0001-7 20 53.04 38.54 28.62 46.34 39.94 HIF4-26P-3.18DS 563-0002-0 26 62.58 48.08 38.16 55.88 49.48 HIF4-34P-3.18DS 563-0003-2 34 75.30 60.80 50.88 68.60 62.20 HIF4-40P-3.18DS 563-0030-5 40 84.84 70.34 60.42 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.89 101.44 78.14 71.74 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your HiroseConnector sales representative. HIF4 SeriesRibbon Cable Pin Header Straight Through hole Type Unit:mm Part Number CL No. Number of Contacts A B C D E F HIF4-16P-3.18DSA 563-0027-0 16 46.68 32.18 22.26 39.98 33.58 HIF4-20P-3.18DSA 563-0004-5 20 53.04 38.54 28.62 46.34 39.94 HIF4-26P-3.18DSA 563-0005-8 26 62.58 48.08 38.16 55.88 49.48 HIF4-34P-3.18DSA 563-0006-0 34 75.30 60.80 50.88 68.60 62.20 HIF4-40P-3.18DSA 563-0031-8 40 84.84 70.34 60.42 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.98 101.44 78.14 71.74 RoHS YES Pin Header Wrapping Type Unit:mm Part Number CL No. Number of Contacts A B C D E F HIF4-16P-3.18W 563-0028-3 16 46.68 32.18 22.26 39.98 33.58 HIF4-20P-3.18W 563-0007-3 20 53.04 38.54 28.62 46.34 39.94 HIF4-26P-3.18W 563-0008-6 26 62.58 48.04 38.16 55.88 49.48 HIF4-34P-3.18W 563-0009-9 34 75.30 60.80 50.88 68.60 62.20 HIF4-40P-3.18W 563-0032-0 40 84.84 70.34 60.42 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.98 101.44 78.14 71.74 RoHS YES B5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HIF4 SeriesRibbon Cable Connector BPCB mounting pattern Pin Header Right Angle Type Number of Contacts A B 16 22.26 33.58 20 28.62 39.94 26 38.16 49.48 34 50.88 62.20 40 60.42 71.74 Number of Contacts A B 16 22.26 39.98 20 28.62 46.34 26 38.16 55.88 34 50.88 68.60 40 60.42 78.14 Pin Header Straight Through hole Type or Pin Header Wrapping Type Type Shape DS type DSA type B6 W type The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your HiroseConnector sales representative. HIF4 SeriesRibbon Cable BHIF4 Basic Connection Method As shown below in Figure 1, contact positions are indicated by marks (K). Fig.1 The connected contact is indicated with a symbol next to the individual type name. However, the contact symbol connected to the cable mark is indicated at the mark *. Type AB Type A side Type B side * K mark and K mark K mark and mark M Type AO Type BO Type AD M A side D side * K mark and K mark K mark and mark Type CO Type CD M C side D side * K mark and K mark K mark and mark Type DO B7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HIF4 SeriesRibbon Cable Connector Contact positions are designated with marks as shown below. According to the illustration on the left, the illustration 1 indicates these positions on the right. Note 1: Cable length tolerance 500 +10, 0 max. (mm) 500 +3%, 0% min. Note 2.When a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. If connection failure has occurred, consult HRS Sales Department. Type AC M M A side C side * K mark and K mark K mark and K mark Type CC M M C side C side * K mark and K mark K mark and K mark Type AA B8 M M A side A side * K mark and K mark K mark and K mark Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: HIF4-20P-3.18DS(01) HIF4A-24P-3.18W HIF4A-24P-3.18W(01)