BTP-53GMCH-XX-20 - DB Lectro, Inc.

BriLux 1W Light Source

BTP-53XXCH-XX-XX

Package Dimension

Features

 Highest Lumen Per Watt

 Long Operational Life

 More Energy Efficient

 IC Compatible

 Low DC Voltage

 Superior ESD Protection

 Smallest Footprint

Applications

 Accent Lighting

 Automotive Exterior/Interior Light

 High Power Back Light

 Reading Light

 Marine/Miner’s Lighting

 Portable Lighting

Tolerance: ± Unit: ±

Optical Characteristics at Ta=25ºC

LED CHIP Wavelength/CCT

Range (nm/K)

Drive

Voltage

Luminous

Flux

@350mA(lm)

PART NUMBER

MATERIAL

Lens

Color Min/Max Typ. Typ.

VIEW

ANGLE

2θ1/2

(deg)

BTP-53NRCH-XX-15 AlInGaP Water Clear 620~635 2.85V 15 lm 60

BTP-53AMCH-XX-15 AlInGaP Water Clear 600~620 2.85V 15 lm 60

BTP-53YECH-XX-15 AlInGaP Water Clear 585~595 2.85V 15 lm 60

BTP-53DBCH-XX-05 AlInGaN Water Clear 450~460 3.40V 5 lm 60

BTP-53BLCH-XX-06 AlInGaN Water Clear 460~475 3.40V 6 lm 60

BTP-53GBCH-XX-08 AlInGaN Water Clear 475~485 3.40V 8 lm 60

BTP-53BGCH-XX-15 AlInGaN Water Clear 495~510 3.40V 15 lm 60

BTP-53GMCH-XX-20 AlInGaN Water Clear 510~520 3.40V 20 lm 60

BTP-53PGCH-XX-25 AlInGaN Water Clear 520~530 3.40V 25 lm 60

BTP-53WHCH-XX-20 AlInGaN Water Clear 5000K~8000K 3.40V 20 lm 60

0.01

0.25

inch

DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com

BriLux 1W Light Source

BTP-53XXCH-XX-XX

Absolute Maximum Ratings at Ta=25ºC

Parameter White/Green/Cyan/Blue Red/Amber/Yellow

Power Dissipation (mW) 1000 450

DC Forward Current (mA)[1] 350 150

Peak Pulsed Forward Current (mA) 500 300

Average Forward Current (mA) 350 150

Reverse Voltage (V) 5 5

Reverse Current (uA) 10 10

LED Junction Temperature (°C) 120 120

Al-PCB Temperature (°C)[3] 100 100

Storage Temperature (°C) -40 to +100 -40 to +100

Soldering Temperature (°C)[4] 260 for 5 seconds max 260 for 5 seconds max

Application Notes:

1. Proper forward current must be observed to maintain the junction temperature below maximum

rating

2. Although all products listed are class one ESD protection (+/- 1KV by HBM mode), care must be

fully taken when handling products

3. Measured at back of aluminium PCB without additional heat sink. We recommend mounting

BriLux light source directly to heat sink with fasteners for best performance.

4. Measured at contact terminals.

5. Specification is subjected to change without notice.

DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com

BriLux 1W Light Source

BTP-53XXCH-XX-XX

Typical Electro-Optical Characteristics Curves at Ta=25ºC

(Red/Yellow/Blue/Green)

DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com

BriLux 1W Light Source

BTP-53XXCH-XX-XX

Typical Electro-Optical Characteristics Curves at Ta=25ºC (White)

White BriLux

DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com