THT CURRENT SENSE TRANSFORMERS & INDUCTORS VDE Approved Designed for switching power supply applications Transformer meets IEC950 insulation requirements V DE Frequency range from 20kHz to 200kHz Electrical Specifications @ 25C -- Operating Temperature -40C to 130C Part Number Transformer with 2-1 T Primaries Schem. Figure -- PE-64487 PE-64488 PE-64517 PE-64518 PE-64519 -- 1C 1C 1C 1D 1D 1D -- Part Number Part Number Transformer Schem. Inductor without with 1T Figure Primary Primary PE-63586 PE-63587 PE-63588 PE-63617 PE-63618 PE-63619 PE-63691 1A 1A 1A 1B 1B 1B 1B Schem. Figure Turns NS Secondary Inductance MH (MIN) Secondary Inductance Test Voltage (15.75 KHz) RS ( MAX) RT ( NOM) Primary Unipolar Amp Sec. Rating (MAX) Primary Bipolar Amp Sec. Rating (MAX) 2A 2A 2A 2B 2B 2B -- 50 100 200 50CT 100CT 200CT 300CT 5.0 20.0 80.0 5.0 20.0 80.0 180.0 0.5 1.0 2.0 0.5 1.0 2.0 3.0 0.7 1.40 4.50 0.7 1.40 4.50 11.0 50 100 200 50 100 200 300 150 300 600 150 300 600 900 300 600 1200 300 600 1200 1800 PE-51686 PE-51687 PE-51688 PE-51717 PE-51718 PE-51719 -- NOTES: 1. Maximum ratings specified with rated secondary terminating resistance and 1 turn primary. 2. Amp-microsecond (ASec.) rating of primary equals volt microsecond (VSec.) rating of secondary when secondary is terminated in rated resistance. (Amp--microseconds is equal to the product of a square pulse of current in amps, times the current pulse width in microseconds. 3. Maximum operating temperature 105C (ambient plus rise). 4. When terminated with rated terminating resistance, the inductor scale factor is Vout = 1 volt per amp. for center tapped units terminating resistance for each half of winding is listed value divided by two. 5. 1 turn primary peak sense current is 20 amps for all parts listed above. Mechanicals Schematics Inductor Transformer 1 6 3 PE-XXXXX 4 DATE CODE 2 7 3 0.700 MAX 17,78 .170 4,32 MIN 0.900 MAX 22,86 4 0.700 MAX 17,78 0.800 20,32 .051 .003 4X1,30 ,076 (Leads: 1,2,6,7) 0.700 17,78 .250 6,35 .030 .002 2X0,76 ,051 (Leads: 3,5) .015 0,38 MIN .500/.700 MAX/MIN 12,7/17,78 0.500 12,70 .500 12,70 For More Information : 0.500 12,70 .030 .002 0,76 0,05 Solderable Pin Dimensions: Inches mm 1D 3 1 2 6 7 .500 MIN 12,70 5 2 1C 1457 .200 5,08 5 2 0.652 17,01 MAX 1441 .010 MIN 0,25 3 1 0.390 9,906 MAX 5 V DE 1B 1A 1 5 3 1 2 4 6 7 5 2B 2A 1 1 2 3 3 Unless otherwise specified, all tolerances are .005 0,13 UNITED STATES (Worldwide) UNITED KINGDOM (Northern Europe) FRANCE (Southern Europe) SINGAPORE (Southern Asia) TAIWAN, R.O.C. (Northern Asia) HONG KONG (China/Hong Kong) 12220 World Trade Drive San Diego, CA 92128 U.S.A. http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 1 & 2 Huxley Road The Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 6287 8998 FAX: 65 6280 0080 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 9/F, Phase 2, Tai Sang Shatin Warehouse Centre 6 Wong Chuk Yeung Street Fotan, Shatin, Hong Kong TEL: 852 2788 6588 FAX: 852 2776 1055 DISTRIBUTOR Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Printed on recycled paper. (c)2003, Pulse Engineering, Inc. P578.A (5/03)