VX-501 Voltage Controlled Crystal Oscillator VX-501 Features * * * * * * * * * * * * * Applications * * * * AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Low Phase Noise Tight Stabilities Frequency Range 1 - 800MHz Standard Frequencies 2.048; 10; 16,384; 30,72; 32,768; 38,88; 44.8; 52; 61.44; 68.736; 76.8; 77.76; 81.92; 92.16; 100; 112; 122.88; 125; 134.4; 153.6; 155.52; 160; 179.2; 184.32; 245.76; 312.5; 320; 368.64; 400; 448; 471.8592; 491.52; 622.08; 672; 737.28; 800MHz Previous Model Number: C5310 Base Stations Test Equipment Synthesizers Switching Performance Specifications Frequency Stabilities1 Parameter Min vs. operating temperature range (referenced to +25C) Typical Max Units Condition -15 +15 ppm -20 to +70C Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 Year vs. aging (following years) -10 -3 -1 -3 -1 +10 +3 +1 +3 +1 ppm ppm ppm ppm ppm @Vc=Vs/2 VS 5% Load 10% vs. operating temperature range (referenced to +25C) -30 +30 ppm -40 to +85C Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 Year vs. aging (following years) -15 -3 -2 -3 -1 +15 +3 +2 +3 +1 ppm ppm ppm ppm ppm @Vc=Vs/2 VS 5% Load 10% Page 1 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Supply Voltage (Vs) Min Typical Max Units 3.135 3.3 3.465 VDC Current consumption 40 mA @ HCMOS, Sinewave Current consumption 90 mA @ PECL, LVDS 5.25 VDC Current consumption 30 mA @ HCMOS, Sinewave Current consumption 80 mA @ PECL, LVDS Supply voltage (standard) Supply voltage 4.75 5 Condition Options Parameter RF Output Signal HCMOS Load 15 pF Rise and Fall time Duty cycle 40 Signal 5 ns @ 15 pF 10 to 90% 60 % @ Vs / 2 PECL 50 Rise and Fall time Duty cycle 45 Signal 1 ns 55 % 20 to 80% Options Load LVDS Load 100 Rise and Fall time Duty cycle 40 Signal 1 ns 60 % 10 to 90% Sinewave Load 50 Output Power -3 0 Tuning Range 75.0 90 3 dBm Frequency Tuning (EFC) Linearity 200.0 10 % Tuning Slope Positive Control Voltage Range 0 0.5 Frequency Control Input Impedance 10 1.65 2.5 3.3 4.5 VDC VDC with Vs = 3.3V with Vs = 5V k Additional Parameters Phase Noise Jitter Phase Noise Jitter Phase Noise Jitter Phase Noise Jitter -85 -115 -138 -153 -155 0.2 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz @52MHz HCMOS 3.3V -80 -105 -135 -143 -145 0.6 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz @ 155.52 MHz PECL 3.3V -80 -112 -130 -150 -155 0.2 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz @ 155.52 MHz LVDS 3.3V -55 -85 -115 -140 -150 0.1 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz @ 622.08 MHz PECL 3.3V Page 2 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Additional Parameters Subharmonics -40 Weight dBc For > 160 MHz only 2.0 g Processing & Packing Handling & Processing Note Absolute Maximum Ratings Supply voltage (Vs) 6.0 V Operable Temperature Range -40 +85 C Storage Temperature Range -55 +125 C Cross Reference CrossPhase Reference List Typical NoiseList and Jitter Phase Noise Phase Noise VX-501 @ 52 MHz HCMOS VX-501 @ 155.52 MHz LVPECL Phase Noise Phase Noise VX-501 @ 155.52 MHz LVDS VX-501 @ 622.08 MHz LVPECL Page 3 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Enclosure Package Codes Package Codes Type Height "H" Pin Length "L" Type Height "H" G223B 5.9 NA G218B 5.9 Pin Connections Pin Connections Control Voltage (Vc) 1 Control Voltage (Vc) 2 Ground 2 N.C. / Enable (Option) 3 RF Output 3 Ground 4 Supply Voltage Input (Vs) 4 RF Output 5 RF Output complementary (PECL / LVDS) N.C. (CMOS) 6 Supply Voltage Input (Vs) 1 Marking Enable true table (optional) VX-501-xxxx HCMOS LVPECL / LVDS Frequency Pin 2 Pin 4 Pin 5 Pin 4 Pin 5 z AYYWW High Data N.C. No Data No Data Open Data N.C. Data Compl. Data Low High Tristate N.C. Data Compl. Data Page 4 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtun Unwinding direc X B Gurtunterseite Tape buttom side K P Gurtoberseite Tape upper side *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Enclosure Type Tape Width W (mm) Quantity per meter Quantity per reel Dimension P G218B/G223B 24 83.3 850 12 Recommended Reflow Profile Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Average ramp-up rate (TL to TP) 3C/second max. Time 25C to Peak Temperature 8 minutes max. 150C 200C 60-180 seconds Time maintained above -Temperature (TL) -Time (tL) 217C 60-150 seconds Preheat -Temperature Min TSmin -Temperature Min TSmax -Time (min to max) tS TSmax to TL -Ramp-up Rate 3C/second max Time maintained above -Temperature (TL) -Time (tL) 217C 60-150 seconds Time within 5C of actual Peak Temperature (tP) 20-40 seconds Peak Temperature (TP) max 260C Ramp-down Rate 6C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. Page 5 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information VX-501 0 - E A J - 105 0 - 52M0000000 Frequency Model Code Enable 0: No Enable 1: Enable Height 0: 5.9 mm (G223B) 1: 5.9 mm (G218B) Stability Code E-305: 30ppm J-105: 15ppm Supply Voltage D: 5V E: 3.3V RF Output Code A: HCMOS C: PECL D: LVDS E: Sinewave Temperature Range E: -40C to +85C J: -20C to +70C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268-801-0 Fax: +49 (0) 7268-801-281 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 8/2008 Page 6 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com