TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822 298
Website: http: //www.microsemi.com
LDS-0155 Rev. 1 (100346) Page 3 of 3
PACKAGE DIMENSIONS
NOTE: Dimensions
1. Dimensions are in inches. Symbol Inches Millimeters Notes
2. Millimeters are given for general information only. Min Max Min Max
3. Package contour optional within BD and length BL. Heat slugs, if BD .060 .107 1.52 2.72 3
any, shall be included within this cylinder but shall not be subject to BL .120 .300 3.05 7.62 3
minimum limit of BD. LD .018 .023 0.46 0.58
4. Within this zone, lead diameter may vary to allow for lead finishes LL 1.000 1.500 25.40 38.10
and irregularities, other than heat slugs. LL1 0.050 1.27 4
5. In accordance with ASME Y14.5M, diameters are equivalent to Φx
symbology.
FIGURE 1. Physical dimensions 1N935B-1, 1N937B-1 through 1N940B-1 (DO-7 and DO-35).
DESIGN DATA
Case: Hermetically sealed glass case DO-35 outline.
Lead Material: Copper clad steel.
Lead Finish: Tin / Lead
Polarity: Diode to be operated with the banded (cathode) end postive.
Mounting Position: Any.