Revision date: July 13, 2 01 5 Page 1 of 3
Overview
This Product Specification defines the general use and performance parameters for Amphenol’s
MUSB series of connector.
Availability: Series A (single & stacked), series B, series Mini-B, se ries Mini-AB, series Micro-AB
with right angle and vertical PCB tails. R ight angle connect ors mou nted on a P CB wit h ma t ching
USB, cable headers or terminal blocks are available for all series. Dust covers for enhanced mating
area protection are also available.
Usage
These connectors meet Military shock & vibration levels and IP67 per IEC 60529 in mated and
unmated conditions. The connector system is designed to provide a standard USB interface for
enclosures exposed to harsh environments. Con nectors mate with any standard USB 2.0 plug.
Achieves data rates up to 480 Mb/s (USB 2.0).
Applications
Intended for use in applications such as:
Medical equipment
Microwave transmitters
GPS, positioning equip ment
Military vehicles, radios, computers
Test eq uipment
Mobile entertainment systems
Traffic control & monitoring s ystems
MUSB Rugged USB
Product Specification S6046C Rev 1.2
MUSB-C111-30
SERIES A, RIGHT
ANGLE, STACKED
MUSB-B151-34
SERIES MINI-B, RIGHT ANGLE
About Amphenol
Commercial Products
Amphenol’s commercial
connector products are
used in a variety of end
user applications
including networking,
telec o m, ser ver &
computer, st orage &
HDD, consu m er
electronics and
entertainment,
professional au dio &
Industrial &
Military/Aerospace.
Related Products
With matching USB
With Cable Header
With Terminal Block
With PCB for wi ring
MUSB-D111-30
SERIES B, R IGHT ANGLE
MUSB-E151-04
SERIES MINI-AB, RIGHT A NGLE
MUSB-A511-00
SERIES A, VERTICAL
MUSB-K152-X0
SERIES MICRO-AB, RIGHT
ANGLE
Amphenol Canada Corp. Page 2 of 3
605 Milner Avenue
Toronto, Ontario, Canada, M1B 5X6 Copyright © Amphenol Corporation 2011 • All rights reserved
+1 416 291 4401
www.amphenolcanada.com
THIS DOCUMENT CONTAINS PROPRIET ARY INFORMATION AND SUCH INFORMATIO N MAY NOT BE DISCLOSED T O OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMIS SION FROM AMPHENOL CANADA CORP.
S6046C Rev 1.2
Connector Electrical Characteristics
Current ratin g: 1.5A per contact 1.0A per contact Up to 1.8A per contact (see dwg)
Parameter Series A & B Series Mini-B & Mini-AB Series Micro-AB
Contact resistance: 30 mΩ max 50 mΩ max 30 mΩ max
Insulation resi stance: 1000 MΩ min 100 MΩ min 100 MΩ min
DWV: 500V AC @ sea level 100V AC @ sea level 100V AC @ sea level
Connector Mechanical Characteristics
Thermal Shock: 5 cycles @ -40° to +125° C
Physical Shock: Per EIA364-27 Condition H (11ms 30G)
Humidity: Per EIA364-31 Cond iti on C , met ho d III
Vibration: Per EIA364-28 per Condition V, Letter A
Salt spra y: Per EIA364-26, 250 Hrs
Process Characteristics
Recommended soldering process: Hand or wave soldering peaked at 260°C for 8 seconds max.
Recommended Torque for #4-40 or M3 Panel Mount Screws: 0.45 to 0.65 Nm (4 – 5.75 in-lbs).
Recommended Torque for #2-56 or M2.5 Panel Mount Screws: 0.23 to 0.34 Nm (2 - 3 in-lbs).
Solder tails suitable for PCB thickness of 1.52mm (.062”)
Mating Cycles: 1500 (Series A & B)
5000 (Ser ies Mini-B & Mini-AB)
10000 (Series Micro-AB)
Material Requirements
MUSB connectors are RoHS compliant.
Unless ot herwise specified, the materials for each componen t shall be:
Contacts: Phosphor Bronze with 30µ” (0.76µm) m in Gold over 50µ” (1.27µm) min Nickel
Housing: Engineering thermop la stic, U L94V-0 rated, Black. White for series B.
Shell: Die cast Zinc alloy, Nickel plating
Temperature rise: Meets the requirement of 30° C ΔT
Operating temperature -40° to +105° C
Available Documents
Drawing Numbers:
P-MUSB-A211-XX MUSB rugged Series A, Right Angle, on PCB with R/A cable header. Thread & Dust cover option
P-MUSB-A511-XX MUSB ru g ged Series A, Ver tical PCB mount
P-MUSB-B151-XX MUSB rugged S er ies Mini-B, right angle PCB tail
P-MUSB-CA11-XX MUSB rugged Series A, stacked, Right angle, on PCB. Thread & Dust cover options
P-MUSB-D411-3X MUSB rugged Series B, Right Angle, on PCB wit h t e r m i nal bloc k
P-MUSB-E151-XX MUSB rugged S eries Mini-AB, Right Angle PCB tail, Thread & Dust Cover options
P-MUSB-K152-X0 MUSB rugged Series Micr o -AB, Right Angle PCB tail, Thread options
Contact factory, authorized Amphenol representative or websi te www.amphenolcanada.com for additional configurations
Quality Test Repor ts
QTR9300377 Series Mini-B & Mini-AB
QTR9300378 Series A & B
QTR9300482 Series Micro-AB
About Amphenol
Commercial Products
Amphenol’s commercial
connector products are
used in a variety of end
user applications
including networking,
telec o m, ser ver &
computer, st orage &
HDD, consu m er
elec tronic s and
entertainment,
profession al audio &
Industrial &
Military/Aerospace.
Related Products
MDB
MRJ
9 POSITION CONNECTOR
SHOWN
MRJ-5480-01 SHOWN
VERTI CAL, P CB TAIL,
8 POSITION RJ45
MRJ-5380-01 SHOWN
RIGHT ANGLE, PCB TAIL,
8 POSITION RJ45
Amphenol Canada Corp. Page 3 of 3
605 Milner Avenue
Toronto, Ontario, Canada, M1B 5X6 Copyright © Amphenol Corporation 2011 • All rights reserved
+1 416 291 4401
www.amphenolcanada.com
THIS DOCUMENT CONTAINS PROPRIET ARY INFORMATION AND SUCH INFORMATIO N MAY NOT BE DISCLOSED T O OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMIS SION FROM AMPHENOL CANADA CORP.
S6046C Rev 1.1
Product Numbering System
MUSB - X
X
X
X - X
X
X
MUSB
Rugged US B Receptacle, Generation 1
Receptacle Type Per USB 2.0
A – Stan dard A Series
B – Mini B Series
C – Standard A Series St acked
D – Standard B Series
E – Mini AB Seri es
K – Micro AB S er ies1
Termination Style
1 – Right Angle
2 – Right Angle on PCB with Right Angle Cable Header2
3 – Right Angle on PCB with Right Angle Matching USB Type Connector2
4 – Right Angle on PCB with Terminal Blocks2
5 – Vertical2
8 – Right Angle on PC B with Vertical Cable Header3
A – Right Angle on PCB with Holes for Wiring (Style 3 PCB)2, 4
B – Right Angle on PCB with Vertical Single Row Isolated Header5
D – Right Angle on PCB with Vertical Dual Row Isolated Header6
E – Right Angle on PCB with Vertical Matching USB Type Connector7
Number of Contacts
1 - Standard 4 per Port for Types A, C & D
5 - Standard 5 per Port for Types B, E & K
Insulator Hous ing Colour
1 – Black for Types A, B, C & E, Whit e fo r Type D
2 – Grey for Type K
Rear Shield and Thread Options8, 9
0 – No Rear Shield, Unified Thread
3 – With Rear Shield, Unified Thread
M – With Rear Shield , Metric Thread
N – No R ear Shield, M etric Thread
Dust Cover Options10
0 – With No Dust Cover11
1 – With Grey Dust Cover
5 – With Black Dust Cover
Unique Special Code12
No Digit – Standard part defined by previous 10 digits
1 to 9 – Unique special feature
Notes
1) Receptacle type K (Micro AB) is a generat ion 2 epo xy free design. I t is curr ently a vailabl e in right a ngle onl y.
Consult wit h Amphenol fo r the availability of the vertical version.
2) Termination styles 2, 3, 4, 5 & A are currently available for r eceptacle types A, B, C, D & E only.
3) Termination style 8 is currently available for r eceptacle types A, C & D only.
4) Termination style A uses the pcb from termination style 3.
5) Termination style B is current ly availab le for r ecept acle t ypes A & D only.
6) Termination style D is current ly available for receptacle t ype C only.
7) Te rmina tion style E is c ur r ently available for r ecept acle t ypes A & C only.
8) Rear shields are optional for recept acle t ypes B & E (Mini B & Mini AB) with right ang le t er mination style.
Rear shields are required for all other types with r ight angle terminations. Rear s hie lds are not available for
vertical ter mination style.
9) For recept acle types A, C & D (Standard A & B Series), the unified thread is #4-40UNC and the metr ic thread
is M3x0.5. For receptacle types B, E & K (Mini B, Mini AB & Micro AB), the unified thread is #2-56UNC
and the metric thread is M2.5x0.45.
10) When dust co vers are supplied with the connector, they are not installed. They are suppl ied in bulk inside eac h
package of connect ors. For receptacle t ype C (St andard A Series Stacked), t wo dust covers are supplied per
connector.
11) For recept acle types B & E (Mini B & Mini AB), dust cover code 4 is frequent ly used. Co de 4 co nnectors are
identical to code 0. For example, part number MUSB-B151-34 is identical to MUSB-B151-30.
12) Consult with A mphenol for a dditio nal t ermina tion styles, solder cup contact s , mounting styles, conductive
gaskets or ot her r equireme nt s of interest. See catalo gue Accessories pages for dust cover options.
