s Dimming 1 Note 1: Maximum suggested remote mounting distance is 16 feet. For additional information on further distances and EMI compliance reference application note LED126. Note 2: The Dimming input is isolated and will allow Class 2 or non-Class 2 wiring across Purple and Gray wires 2 120 Output Voltage [V] 100 80 60 40 20 0 400 600 800 1000 1200 1400 Output Current [mA] Power factor >0.9 and THD <20% at 120V and 277V 100 % of Output current 80 60 40 20 0 0 1 2 3 4 5 6 7 8 9 10 Dim Voltage [V] 3 Efficiency @ 277V 92 90 Efficiency [%] 88 86 84 1250mA 82 600mA 80 78 76 30 40 50 60 70 80 90 100 Output Voltage [V] Efficiency @ 120V 90 Efficiency [%] 87 84 600mA 81 1250mA 78 75 30 40 50 60 70 80 90 100 Output Voltage [V] 4 1.00 0.98 0.96 Power factor 0.94 0.92 0.90 120V 0.88 277V 0.86 0.84 0.82 0.80 10 20 30 40 50 60 70 80 90 100 Output Power [W] 1.00 Power factor 0.98 0.96 0.94 0.92 0.90 100 150 200 250 300 350 Input Voltage[V AC] At Full load 5 9 8 7 THD [%] 6 5 120V 4 277V 3 2 1 0 10 20 30 40 50 60 70 80 90 100 Output Power [W] 7 6 THD [%] 5 4 3 2 1 0 100 150 200 250 Input Voltage[V AC] 300 350 At Full load 6 % Of Output Current 100 80 60 40 20 0 6.5 6 5.5 5 4.5 4 RNTC in k 7 8 120 100 Life time (kHrs) 80 60 40 20 0 30 40 50 60 70 80 90 Case Temperature (C) 9 : The absence of a dimmer from this chart does not necessarily imply incompatibility. Please reference the dimmer manufacturer's instructions for installation. OSRAM LEDset and OPTOTRONIC are registered trademarks of OSRAM GmbH.. Specifications subject to change without notice (c) 2014 OSRAM SYLVANIA Inc. 10/14 10