https://www.phoenixcontact.com/gb/products/1441970 Flush-type connector - SACC-CI-M12FS-12CON-L180 THR - 1441970 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 12-pos., with straight THR solder connection Why buy this product Key commercial data Packing unit 60 pc Minimum order quantity 60 pc GTIN Weight per Piece (excluding packing) 5.38 g Custom tariff number 85366990 Country of origin Germany Product key ABQCAF Note Made to Order (non-returnable) Technical data Ambient conditions Ambient temperature (operation) -25 C ... 85 C (Plug / socket) -40 C ... 85 C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40C 1.5 A Rated voltage 30 V Rated surge voltage 0.8 kV 01/06/2015 Page 1 / 7 https://www.phoenixcontact.com/gb/products/1441970 Flush-type connector - SACC-CI-M12FS-12CON-L180 THR - 1441970 Technical data General Number of positions 12 Contact resistance 3 m Insulation resistance 100 M Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category III Pollution degree 3 Connection method THR solder connection Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type PCB mounting Type of packaging Tray Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PPA Sealing material FKM / EPDM Cable Ambient temperature (operation) -40 C ... 85 C (cable, fixed installation) -25 C ... 85 C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27260701 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 01/06/2015 Page 2 / 7 https://www.phoenixcontact.com/gb/products/1441970 Flush-type connector - SACC-CI-M12FS-12CON-L180 THR - 1441970 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / EAC Ex Approvals Approvals submitted Approval details UL Recognized mm/AWG/kcmil 26-20 Nominal current IN 1.5 A Nominal voltage UN 30 V EAC Accessories Accessories Contact insert Sample set - SACC-CIM12FS12PL180THRSHSAMPLE - 1413562 Sensor/actuator flush-type socket, 12-pos. with shroud, A-coded, with straight THR solder connection, contact insert only 01/06/2015 Page 3 / 7 https://www.phoenixcontact.com/gb/products/1441970 Flush-type connector - SACC-CI-M12FS-12CON-L180 THR - 1441970 Accessories Panel mounting base Housing screw connection - SACC-M12-SCO NUT - 1552243 M12 SPEEDCON housing screw connection for M12 female inserts, with O-ring, for all SPEEDCON-capable THR and wave soldering contact carriers Housing screw connection - SACC-DSIV-M12-NUT - 1416144 Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and for the two-piece angled M12 contact carrier Housing screw connection - SACC-M12-SCO NUT L 90 - 1432460 M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible THR and wave soldering contact carriers Housing screw connection - SACC-BP-F-M12/M15-6-THR - 1414004 Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1 Housing screw connection - SACC-BP-F-M12/M15-7-THR - 1414003 Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1 01/06/2015 Page 4 / 7 https://www.phoenixcontact.com/gb/products/1441970 Flush-type connector - SACC-CI-M12FS-12CON-L180 THR - 1441970 Accessories Housing screw connection - SACC-BP-F-M12/M15-6-THR SCO - 1414020 Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1 Housing screw connection - SACC-BP-F-M12/M15-7-THR SCO - 1414005 Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1 Housing screw connection - SACC-BP-F-M12/VAR-1,0/1,8-9TIP - 1414231 M12 housing screw connection with tolerance-compensating function, for straight THR solderable M12 socket contact inserts. Suitable for 1.0 mm ... 1.8 mm thick front plates. Housing screw connection - SACC-BP-F-M12/VAR-1,7/2,5-9TIP - 1414232 M12 housing screw connection with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts. Suitable for 1.7 mm ... 2.5 mm thick front plates. Housing screw connection - SACC-BP-F-M12/VAR-2,4/3,2-9TIP - 1414233 M12 housing screw connection with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts. Suitable for 2.4 mm ... 3.2 mm thick front plates. 01/06/2015 Page 5 / 7 https://www.phoenixcontact.com/gb/products/1441970 Flush-type connector - SACC-CI-M12FS-12CON-L180 THR - 1441970 Accessories Housing screw connection - SACC-BP-F-M12/VAR-3,1/3,9-9TIP - 1414234 M12 housing screw connection with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts. Suitable for 3.1 mm ... 3.9 mm thick front plates. Housing screw connection - SACC-M12 NUT PRESS - 1437889 Housing screw connection for two-piece M12 connectors for the reflow soldering process. Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry Drawings 01/06/2015 Page 6 / 7 https://www.phoenixcontact.com/gb/products/1441970 Flush-type connector - SACC-CI-M12FS-12CON-L180 THR - 1441970 Schematic diagram 3 11 4 7 4,5 0,02 0,02 ,6 37 20 6 2x1 8 O2,2 5 0,05 0,02 1 9 12 12xO0,6 29,5 5 2 8x 10 Drilling diagram Pin assignment M12, 12-pos., female side view 3xO1,4 +0,05 O5,8 8,5 0,02 0,02 Drilling diagram Dimensional drawing 17 2,5 1,5 O0,6 O8,25 M12 flush-type connector Dimensional drawing 230 20 28 6 155 22 5,2 THR tray packaging Phoenix Contact 2015 (c) - all rights reserved http://www.phoenixcontact.com 01/06/2015 Page 7 / 7