RP08-2415DA - RECOM Power

PD-1

REV.: 1/2016www.recom-power.com

DC/DC Converter

Description

The RP08-A series DC/DC converters are certiﬁed to UL 60950-1 and cUL 60950-1. This makes them

ideal for all telecom and industrial applications where approved safety standards are required. The

DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal

shock and vibration tolerance.

E196683

Features

Regulated

Converters

• 2:1 Wide Input Voltage Range

• 1.6kVDC Isolation

• UL Certiﬁed

• Efﬁciency up to 87%

• Low Proﬁle, 10.2mm Height

• Over Current Protection

8 Watt

DIP24/SMD

Single & Dual

Output

RP08-A

Selection Guide

Part Number Input Output Output Input(1) Efﬁciency(1) Max. Capacitive

Voltage Range Voltage Current Current typ. Load(2)

[VDC] [VDC] [mA] [mA] [%] [µF]

RP08-123.3SA(3) 9-18 3.3 2000 688 80 3300

RP08-1205SA(3) 9-18 5 1500 753 83 1600

RP08-1212SA(3) 9-18 12 666 757 88 350

RP08-1215SA(3) 9-18 15 533 766 87 240

RP08-243.3SA(3) 18-36 3.3 2000 344 80 3300

RP08-2405SA(3) 18-36 5 1500 377 83 1600

RP08-2412SA(3) 18-36 12 666 387 86 350

RP08-2415SA(3) 18-36 15 533 392 85 240

RP08-483.3SA(3) 36-75 3.3 2000 172 80 3300

RP08-4805SA(3) 36-75 5 1500 188 83 1600

RP08-4812SA(3) 36-75 12 666 194 86 350

RP08-4815SA(3) 36-75 15 533 194 86 240

RP08-1205DA(3) 9-18 ±5 ±800 803 83 ±1000

RP08-1212DA(3) 9-18 ±12 ±333 766 87 ±160

RP08-1215DA(3) 9-18 ±15 ±267 785 85 ±100

RP08-2405DA(3) 18-36 ±5 ±800 407 82 ±1000

RP08-2412DA(3) 18-36 ±12 ±333 387 86 ±160

RP08-2415DA(3) 18-36 ±15 ±267 393 85 ±100

RP08-4805DA(3) 36-75 ±5 ±800 196 85 ±1000

RP08-4812DA(3) 36-75 ±12 ±333 191 87 ±160

RP08-4815DA(3) 36-75 ±15 ±267 192 87 ±100

UL60950-1 Certiﬁed

Input Voltage

Output Voltage

Single or Dual

RP08-__ __ _A/_

Notes:

Note3: no sufﬁx for standard package (DIP24), add sufﬁx „SMD“ for SMD package

Package(3)

Model Numbering

Ordering Examples

RP08-4805SA/SMD = 48V Input, 5V Output, Single, SMD Package

RP08-1205DA = 12V Input, 5V Output, Dual, DIP24 Package

Notes:

Note1: Maximum value at nominal input voltage and full load.

Note2: Test by minimum Vin and constant resistor load.

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range

nom. Vin = 12V

nom. Vin = 24V

nom. Vin = 48V

9VDVC

18VDC

36VDC

12VDC

24VDC

48VDC

18VDC

36VDC

75VDC

Under Voltage Lockout (UVLO) none

Input Filter Pi-Type

Input Reﬂected Ripple Current nominal Vin and full load 20mAp-p

Input Surge Voltage

Vin = 12V, 100ms max.

Vin = 24V, 100ms max.

Vin = 48V, 100ms max.

36VDC

50VDC

100VDC

Start-up time Power up

Remote ON/OFF

700ms

5ms

Operating Frequency Range 270kHz 300kHz 330kHz

Minimum Load(4) full load 10%

Ripple and Noise 20MHz Bandwidth 50mVp-p

Remote ON/OFF(5) Positive Logic DC-DC ON

DC-DC OFF

Open or 3.0V < Vr < 12V

Short or 0V < Vr < 1.2V

Input current of Remote pin (CTRL) DC-DC OFF 2.5mA

DC-DC ON -0.5mA +0.5mA

continued on next page

PD-2 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-A

Series

Efﬁciency vs. Output Current Efﬁciency vs. Input Voltage

Notes:

Note4: The RP08 series requires a minimum of 10% loading on the output to maintain speciﬁed regulation. Operation under no-load condition will not

damage these devices, however they may not meet all listed speciﬁcation.

Note5: The ON/OFF control pin voltage is referenced to -Vin pin.

9Vin

12Vin

18Vin

Efficiency [%]

Output Current [%]

20 30 40 50 60 70 80 90 100

Efficiency [%]

Input Voltage [VDC]

11 12 14 16 1810 13 15 17

RP08-1205SA

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

REGULATIONS

Parameter Condition Value

Output Voltage Accuracy ±1.0% max.

Line Voltage Regulation low line to high line ±0.2% max.

Load Voltage Regulation Single (0% to 100% load) DIP24

SMD

±0.5%

±1%

Dual (0% to 100% load) DIP24, SMD ±1%

Cross Regulation asymmetrical 25%<>100% load ±5%

Transient Response recovery time 25% load step change 200μs typ.

RP08-A

Series

Efﬁciency vs. Output Current

Efﬁciency vs. Input Voltage

PD-3

REV.: 1/2016www.recom-power.com

Efficiency [%]

Input Voltage [VDC]

22 24 28 32 3620 26 30 34

Efficiency [%]

Input Voltage [VDC]

44 48 56 66 7540 52 60 72

RP08-4805SA

RP08-2405SA

18Vin

24Vin

36Vin

Efficiency [%]

Output Current [%]

20 40 60 80 100

30 50 70 90

36Vin

48Vin

75Vin

Efficiency [%]

Output Current [%]

20 40 60 80 100

30 50 70 90

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-A

Series

ENVIRONMENTAL

Parameter Condition

Value

Operating Temperature Range without derating

with derating

-40°C to +80°C

-40°C to +100°C

Maximum Case Temperature +100°C

Temperature Coefﬁcient ±0.02%/°C max.

Thermal Impedance Natural convection (20LFM) 20°C/Watt typ.

Operating Humidity non-condensing 5% - 95% RH

Shock MIL-STD-810F

Vibration MIL-STD-810F

MTBF MIL-HDBK-217F

BELLCORE TR-NWT-000332(7)

3543 x 103 hours

3165 x 10³ hours

Notes:

Note7: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground ﬁxed and controlled environment).

Note8: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here

please contact our technical support service at techsupportAT@recom-power.com.

-40 60 80 10040

200-20

100

Ambient Temperature [°C]

Output Power [%]

Derating Graph(8)

RP08-1212SA

PROTECTIONS

Parameter Condition Value

Short Circuit Protection (SCP) continuous, automatic recovery

Over Load Protection (OLP) % of Iout rated 150% typ.

Isolation Voltage

DIP24 I/P to O/P

I/P (O/P) to case

1.6kVDC/1 minute

SMD I/P to O/P

I/P (O/P) to case

1.6kVDC/1 minute

1.0kVDC/1 minute

Isolation Resistance 500VDC 1GΩ min.

Isolation Capacitance 300pF max.

Notes:

Note6: This power module is not internally fused. An input line fuse must always be used.

PD-4 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-A

Series

SAFETY AND CERTIFICATIONS

Certiﬁcate Type Report / File Number Standard

UL General Safety E196683 UL60950-1 1st Ed.: 2003

C22.2 No. 60950 1st. Ed.: 2003

EMC Compliance Condition Standard / Criterion

EMI Standard(9) with external ﬁlter EN55022, Class A or B

ESD

Radiated Immunity

Fast Transient(10)

Surge

Conducted Immunity

Air ±8kV and Contact ±6kV

10 V/m

±2kV

±1kV

10 Vr.m.s

EN61000-4-2, Criteria A

EN61000-4-3, Criteria A

EN61000-4-4, Criteria A

EN61000-4-5, Criteria A

EN61000-4-6, Criteria A

Input

Fuse

+VIN

+VOUT

-VOUT

-VIN

LOAD

Fuse

+VIN

+VOUT

COM

-VOUT

-VIN

LOADLOAD

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

Input

Fuse

+VIN

+VOUT

-VOUT

-VIN

LOAD

Fuse

+VIN

+VOUT

COM

-VOUT

-VIN

LOADLOAD

EMI Filtering Class A

EMI Filtering Class B

MODEL C1 C2/C3

RP08-12xxS_D

RP08-12xxS_D/SMD

4.7μF/25V

1210 MLCC

1000pF/2kV

1206 MLCC

RP08-24xxS_D

RP08-24xxS_D/SMD N/A 1000pF/2kV

1206 MLCC

RP08-48xxS_D

RP08-48xxS_D/SMD N/A 1000pF/2kV

1206 MLCC

MODEL C1 C2 C3/C4 L1

RP08-12xxS_D

RP08-12xxS_D/SMD

4.7μF/25V

1210 MLCC N/A 1000pF/2kV

1206 MLCC

CMC :325μH

ref: WE 744290321

ref.: CMC-06

RP08-24xxS_D

RP08-24xxS_D/SMD

6.8μF/50V

1812 MLCC N/A 1000pF/2kV

1206 MLCC

CMC: 325μH

ref: WE 744290321

ref.: CMC-06

RP08-48xxS_D

RP08-48xxS_D/SMD

2.2μF/100V

1812 MLCC

2.2μF/100V

1812 MLCC

1000pF/2kV

1206 MLCC

CMC: 325μH

ref: WE 744290321

ref.: CMC-06

Notes:

Note9: The standard modues meet EMI Class A or Class B with external components, see ﬁlter suggestions below.

Note10: An external input ﬁlter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The suggested capacitor:

Nippon chemi-con KY series 200μF/100V.

PD-5

REV.: 1/2016www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-A

Series

PD-6 REV.: 1/2016 www.recom-power.com

DIMENSIONS and PHYSICAL CHARACTERISTICS

Parameter Type Value

Material

Case

Base

Potting

Nickel coated copper

Non-conductive black plastic

Epoxy (UL94-V0)

Package Dimensions (LxWxH) DIP24

SMD

31.8 x 20.3 x 10.2mm

32.0 x 20.5 x 11.2mm

Package Weight DIP24

SMD

16g

18g

SMD Dimension Drawing (mm)

Pin Connections

Pin # Single Dual

1 Ctrl Ctrl

2 -Vin -Vin

3 -Vin -Vin

9 NC Com

11 NC -Vout

14 +Vout +Vout

16 -Vout Com

22 +Vin +Vin

23 +Vin +Vin

Others NC NC

Pin Pitch Tolerance ±0.25mm

Pin Dimension Tolerance ±0.1mm

XX.X ± 0.5mm

XX.XX ± 0.25mm

NC = No Connection

11.0

25.4

11.2

20.3

0.50 1.60

2.40

32.0

27.94

20.3

25.40

10.16

2.54

1.0 x 0.50

1 4 5 9 10 11 1232

24 21 20

Bottom View Top View

16 15 14 132223

Pin area

DIP Dimension Drawing (mm)

Pin Connections

Pin # Single Dual

1 Ctrl Ctrl

2 -Vin -Vin

3 -Vin -Vin

9 NC Com

11 NC -Vout

14 +Vout +Vout

16 -Vout -Com

22 +Vin +Vin

23 +Vin +Vin

Pin Pitch Tolerance ±0.25mm

Pin Dimension Tolerance ±0.1mm

XX.X ± 0.5mm

XX.XX ± 0.25mm

NC = No Connection

20.3

3.80

10.2

31.8

Ø0.5

20.32

2.0

2 3

Bottom View

911

23 22 16 14

5.08 15.24

2.54

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP08-A

Series

PD-7

REV.: 1/2016www.recom-power.com

PACKAGING INFORMATION

Parameter

Type

Value

Packaging Quantity 7pcs.

Storage Temperature Range -55°C to +125°C

Storage Humidity 5% - 95% RH

The product information and speciﬁcations are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written

consent. A safety-critical application is deﬁned as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inﬂict bodily harm or damage property. The buyer

shall indemnify and hold harmless RECOM, its afﬁliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

RECOM:

RP08-1205DA RP08-1205DA/SMD RP08-1205SA RP08-1205SA/SMD RP08-1212DA RP08-1212DA/SMD RP08-

1212SA RP08-1212SA/SMD RP08-1215DA RP08-1215DA/SMD RP08-1215SA RP08-1215SA/SMD RP08-123.3SA

RP08-123.3SA/SMD RP08-2405DA RP08-2405DA/SMD RP08-2405SA RP08-2405SA/SMD RP08-2412DA RP08-

2412DA/SMD RP08-2412SA RP08-2412SA/SMD RP08-2415DA RP08-2415DA/SMD RP08-2415SA RP08-

2415SA/SMD RP08-243.3SA RP08-243.3SA/SMD RP08-4805DA RP08-4805DA/SMD RP08-4805SA RP08-

4805SA/SMD RP08-4812DA RP08-4812DA/SMD RP08-4812SA RP08-4812SA/SMD RP08-4815DA RP08-

4815DA/SMD RP08-4815SA RP08-4815SA/SMD RP08-483.3SA RP08-483.3SA/SMD