595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 1Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Solid Tantalum Chip Capacitors TANTAMOUNT®,
Conformal Coated, Maximum CV
FEATURES
• Large capacitance rating range
• Terminations: 100 % tin (2) standard tin/lead
available
• Mounting: Surface mount
• 8 mm, 12 mm tape and reel packaging available
per EIA 481 and reeling per IEC 60286-3.
7" [178 mm] standard. 13" [330 mm] available.
•
Case code compatibility with EIA 535BAAC and CECC 30801
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
*Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 85 °C
(to + 125 °C with voltage derating)
Capacitance Range: 0.1 μF to 1500 μF
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 VDC to 50 VDC
Note
• Preferred tolerances and reel sizes are in bold.
We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance, lower
ESR (e.g., 594D series), or increased reliability screening (T95 series).
Note
• The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]. T case = 0.005" [0.13 mm] minimum.
ORDERING INFORMATION
595D 106 X0 010 A 2 T
TYPE CAPACITANCE CAPACITANCE
TOLERANCE DC VOLTAGE RATING
AT + 85 °C CASE
CODE TERMINATION REEL SIZE AND
PACKAGING
This is expressed in pF.
The first two digits are
the significant figures.
The third is the number
of zeros to follow.
X0 = ± 20 %
X9 = ± 10 % This is expressed in V.
To complete the three-digit block,
zeros precede the voltage rating.
A decimal point is indicated by an
“R” (6R3 = 6.3 V).
See Ratings
and Case
Codes table
2 = 100 % tin
4 = Gold plated
8 = Solder
plated (60/40)
Special order
Tape and reel
T = 7"
[178 mm] reel
W = 13"
[330 mm] reel
DIMENSIONS in inches [millimeters]
CASE CODE L MAX. W H A B D REF. J MAX.
T0.087
[2.2] 0.043 ± 0.012
[1.1 ± 0.3] 0.043 ± 0.012
[1.1 ± 0.3] 0.016 ± 0.008
[0.4 ± 0.2] 0.042 ± 0.001
[1.07 ± 0.25] 0.063
[1.6] 0.004
[0.1]
S0.134
[3.4] 0.067 ± 0.008
[1.7 ± 0.2] 0.051 ± 0.008
[1.3 ± 0.3] 0.031 ± 0.012
[0.8 ± 0.3] 0.079 ± 0.012
[2.0 ± 0.3] 0.087
[2.2] 0.004
[0.1]
A0.146
[3.7] 0.071 ± 0.012
[1.8 ± 0.3] 0.055 ± 0.012
[1.4 ± 0.3] 0.031 ± 0.012
[0.8 ± 0.3] 0.087 ± 0.016
[2.2 ± 0.4] 0.115
[2.9] 0.004
[0.1]
M0.142
[3.6] 0.106 ± 0.012
[2.7 ± 0.3] 0.067 ± 0.012
[1.7 ± 0.3] 0.031 ± 0.012
[0.8 ± 0.3] 0.079 ± 0.012
[2.0 ± 0.3] 0.253
[6.4] 0.004
[0.1]
B0.157
[4.0] 0.110 + 0.012/- 0.016
[2.8 + 0.3/- 0.4] 0.075 + 0.012/- 0.024
[1.9 + 0.3/- 0.6] 0.031 ± 0.012
[0.8 ± 0.3] 0.098 ± 0.016
[2.5 ± 0.4] 0.138
[3.5] 0.004
[0.1]
C0.280
[7.1] 0.126 ± 0.012
[3.2 ± 0.3] 0.098 ± 0.012
[2.5 ± 0.3] 0.051 ± 0.012
[1.3 ± 0.3] 0.181 ± 0.024
[4.6 ± 0.6] 0.236
[6.0] 0.004
[0.1]
G0.220
[5.6] 0.144 ± 0.016
[3.65 ± 0.4] 0.087
[2.2 max.] 0.051 ± 0.012
[1.3 ± 0.3] 0.134 ± 0.016
[3.4 ± 0.4] 0.236
[6.0] 0.004
[0.1]
D0.295
[7.5] 0.169 + 0.012/- 0.024
[4.3 + 0.3/- 0.6] 0.110 ± 0.012
[2.8 ± 0.3] 0.051 ± 0.012
[1.3 ± 0.3] 0.181 ± 0.024
[4.6 ± 0.6] 0.252
[6.4] 0.004
[0.1]
R0.283
[7.2] 0.236 + 0.012/- 0.024
[6.0 + 0.3/- 0.6] 0.138 + 0.012/- 0.016
[3.5 + 0.3/- 0.4] 0.051 ± 0.012
[1.3 ± 0.3] 0.181 ± 0.024
[4.6 ± 0.6] 0.244
[6.2] 0.004
[0.1]
W
J
J
H
MAX. MAX.
Tantalum wire
nib identies
anode (+)
terminal
L
D
MAX.
REF.
A
B
595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 2Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CASE CODES
μF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V
0.10 T
0.15 T
0.22 T/A
0.33 T A
0.47 T A A
0.68 T A A/B
1.0 TA A A/B
1.5 T A A/B B/C
2.2 T T/A A A/B B B/C
3.3 T/A A T A B B/C C
4.7 T A T/A A A/B B/C B/C C
6.8 T T/A A A A/B B/C C C/D
10 T/A A A A/B B B/C D D/R
15 A A A/B A/B B C C/D R
22 A/B A/B M/B B/C C/D D/R R
33 A/B S/A/B/C A/B B/C C/D R
47 A A/B B /C B/C C/D D/R R
68 A A/B B/C C/D C/D/R D/R
100 A/B M/B/C B/C/D C/D/R D/R R
120 C C C/D R R
150 B/C D C/D D/R R
180 D D D/R R R
220 C/D C/G/D C/D/R R
270 C/D R
330 C C/D/R D/R R
390 D R R
470 C/R D/R R
560 R
680 D R R
1000 R R
1500 R
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
4 VDC AT + 85 °C, 2.7 VDC AT + 125 °C
4.7 T 595D475(1)004T(2)(3) 0.5 6 7.80 0.06
6.8 T 595D685(1)004T(2)(3) 0.5 6 7.80 0.06
10 T 595D106(1)004T(2)(3) 0.5 6 7.80 0.06
10 A 595D106(1)004A(2)(3) 0.5 6 1.90 0.20
15 A 595D156(1)004A(2)(3) 0.6 6 1.40 0.23
33 A 595D336(1)004A(2)(3) 1.3 6 1.40 0.23
33 B 595D336(1)004B(2)(3) 1.3 6 0.47 0.43
47 A 595D476(1)004A(2)(3) 1.9 6 1.40 0.23
68 A 595D686(1)004A(2)(3) 2.7 6 1.30 0.24
100 A 595D107(1)004A(2)(3) 4.0 12 0.60 0.35
100 B 595D107(1)004B(2)(3) 4.0 8 0.45 0.43
120 C 595D127(1)004C(2)(3) 4.8 8 0.19 0.76
150 B 595D157(1)004B(2)(3) 6.0 8 0.45 0.43
150 C 595D157(1)004C(2)(3) 6.0 8 0.18 0.78
180 D 595D187(1)004D(2)(3) 7.2 8 0.14 1.04
220 C 595D227(1)004C(2)(3) 8.8 8 0.18 0.78
220 D 595D227(1)004D(2)(3) 8.8 8 0.14 1.04
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”; for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 3Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
4 VDC AT + 85 °C, 2.7 VDC AT + 125 °C
270 C 595D277(1)004C(2)(3) 10.8 8 0.17 0.80
270 D 595D277(1)004D(2)(3) 10.8 8 0.13 1.07
330 C 595D337(1)004C(2)(3) 13.2 8 0.17 0.80
390 D 595D397(1)004D(2)(3) 15.6 8 0.13 1.07
470 C 595D477(1)004C(2)(3) 18.8 10 0.16 0.83
470 R 595D477(1)004R(2)(3) 18.8 10 0.13 1.39
680 D 595D687(1)004D(2)(3) 27.2 12 0.13 1.07
1000 R 595D108(1)004R(2)(3) 40.0 16 0.07 1.89
1500 R 595D158(1)004R(2)(3) 60.0 20 0.07 1.89
6.3 VDC AT + 85 °C, 4 VDC AT + 125 °C
3.3 T 595D335(1)6R3T(2)(3) 0.5 6 8.50 0.06
3.3 A 595D335(1)6R3A(2)(3) 0.5 6 3.80 0.14
4.7 A 595D475(1)6R3A(2)(3) 0.5 6 3.80 0.14
6.8 T 595D685(1)6R3T(2)(3) 0.5 6 8.50 0.06
6.8 A 595D685(1)6R3A(2)(3) 0.5 6 3.60 0.14
10 A 595D106(1)6R3A(2)(3) 0.6 6 1.90 0.20
15 A 595D156(1)6R3A(2)(3) 0.9 6 1.70 0.21
22 A 595D226(1)6R3A(2)(3) 1.4 6 1.70 0.21
22 B 595D226(1)6R3B(2)(3) 1.4 6 0.57 0.39
33 S 595D336(1)6R3S(2)(3) 2.1 8 1.30 0.21
33 A 595D336(1)6R3A(2)(3) 2.1 6 1.70 0.21
33 B 595D336(1)6R3B(2)(3) 2.1 5 0.57 0.39
33 C 595D336(1)6R3C(2)(3) 2.1 9 0.29 0.62
47 A 595D476(1)6R3A(2)(3) 2.8 6 1.50 0.22
47 B 595D476(1)6R3B(2)(3) 2.8 5 0.57 0.39
68 A 595D686(1)6R3A(2)(3) 4.3 12 0.50 0.39
68 B 595D686(1)6R3B(2)(3) 4.3 6 0.55 0.39
100 M 595D107(1)6R3M(2)(3) 6.3 14 0.40 0.49
100 B 595D107(1)6R3B(2)(3) 6.3 8 0.55 0.39
100 C 595D107(1)6R3C(2)(3) 6.3 8 0.20 0.74
120 C 595D127(1)6R3C(2)(3) 7.6 8 0.19 0.76
150 D 595D157(1)6R3D(2)(3) 9.5 8 0.50 0.55
180 D 595D187(1)6R3D(2)(3) 11.3 8 0.14 1.04
220 C 595D227(1)6R3C(2)(3) 13.9 8 0.18 0.78
220 G 595D227(1)6R3G(2)(3) 13.9 8 0.18 0.80
220 D 595D227(1)6R3D(2)(3) 13.9 8 0.14 1.04
330 C 595D337(1)6R3C(2)(3) 20.8 8 0.17 0.80
330 D 595D337(1)6R3D(2)(3) 20.8 8 0.14 1.04
330 R 595D337(1)6R3R(2)(3) 20.8 8 0.13 1.39
390 R 595D397(1)6R3R(2)(3) 24.6 8 0.13 1.39
470 D 595D477(1)6R3D(2)(3) 29.6 8 0.13 1.07
470 R 595D477(1)6R3R(2)(3) 29.6 10 0.12 1.44
560 R 595D567(1)6R3R(2)(3) 35.3 10 0.11 1.51
680 R 595D687(1)6R3R(2)(3) 42.8 10 0.09 1.67
1000 R 595D108(1)6R3R(2)(3) 63.0 16 0.07 1.89
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”; for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 4Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C, 7 VDC AT + 125 °C
2.2 T 595D225(1)010T(2)(3) 0.5 6 8.60 0.06
3.3 A 595D335(1)010A(2)(3) 0.5 6 3.80 0.14
4.7 T 595D475(1)010T(2)(3) 0.5 6 8.60 0.06
4.7 A 595D475(1)010A(2)(3) 0.5 6 3.60 0.14
6.8 A 595D685(1)010A(2)(3) 0.7 6 3.60 0.14
10 A 595D106(1)010A(2)(3) 1.0 6 1.90 0.20
15 A 595D156(1)010A(2)(3) 1.5 6 1.80 0.20
15 B 595D156(1)010B(2)(3) 1.5 6 0.67 0.36
22 A 595D226(1)010A(2)(3) 2.2 6 1.80 0.20
22 B 595D226(1)010B(2)(3) 2.2 6 1.90 0.21
33 A 595D336(1)010A(2)(3) 3.3 8 3.00 0.16
33 B 595D336(1)010B(2)(3) 3.3 6 1.90 0.21
47 B 595D476(1)010B(2)(3) 4.7 6 0.65 0.36
47 C 595D476(1)010C(2)(3) 4.7 6 0.30 0.61
68 B 595D686(1)010B(2)(3) 6.8 6 0.65 0.36
68 C 595D686(1)010C(2)(3) 6.8 6 0.24 0.68
100 B 595D107(1)010B(2)(3) 10.0 12 0.40 0.46
100 C 595D107(1)010C(2)(3) 10.0 8 0.20 0.74
100 D 595D107(1)010D(2)(3) 8.0 7 0.15 1.00
120 C 595D127(1)010C(2)(3) 12.0 7 0.22 0.71
120 D 595D127(1)010D(2)(3) 12.0 8 0.14 1.04
150 C 595D157(1)010C(2)(3) 15.0 8 0.22 0.71
150 D 595D157(1)010D(2)(3) 15.0 8 0.14 1.04
180 D 595D187(1)010D(2)(3) 18.0 7 0.38 0.63
180 R 595D187(1)010R(2)(3) 18.0 8 0.13 1.39
220 C 595D227(1)010C(2)(3) 22.0 8 0.20 0.74
220 D 595D227(1)010D(2)(3) 22.0 8 0.14 1.04
220 R 595D227(1)010R(2)(3) 22.0 8 0.13 1.39
270 R 595D277(1)010R(2)(3) 27.0 8 0.13 1.39
330 D 595D337(1)010D(2)(3) 33.0 8 0.14 1.04
330 R 595D337(1)010R(2)(3) 33.0 8 0.13 1.39
390 R 595D397(1)010R(2)(3) 39.0 8 0.12 1.44
470 R 595D477(1)010R(2)(3) 47.0 8 0.12 1.44
680 R 595D687(1)010R(2)(3) 68.0 14 0.09 1.67
16 VDC AT + 85 °C, 10 VDC AT + 125 °C
1.5 T 595D155(1)016T(2)(3) 0.5 6 8.70 0.06
2.2 T 595D225(1)016T(2)(3) 0.5 6 8.70 0.06
2.2 A 595D225(1)016A(2)(3) 0.5 5 3.90 0.14
3.3 T 595D335(1)016T(2)(3) 0.5 6 8.60 0.06
4.7 A 595D475(1)016A(2)(3) 0.8 6 2.90 0.16
6.8 A 595D685(1)016A(2)(3) 1.1 6 2.80 0.16
10 A 595D106(1)016A(2)(3) 1.6 6 2.50 0.17
10 B 595D106(1)016B(2)(3) 1.6 6 0.76 0.33
15 A 595D156(1)016A(2)(3) 2.4 6 2.40 0.18
15 B 595D156(1)016B(2)(3) 2.4 6 0.75 0.34
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”; for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 5Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
16 VDC AT + 85 °C, 10 VDC AT + 125 °C
22 M 595D226(1)016M(2)(3) 3.5 6 0.50 0.44
22 B 595D226(1)016B(2)(3) 3.5 6 0.75 0.34
33 B 595D336(1)016B(2)(3) 5.3 6 0.72 0.34
33 C 595D336(1)016C(2)(3) 5.3 6 0.29 0.62
47 B 595D476(1)016B(2)(3) 7.5 6 0.72 0.34
47 C 595D476(1)016C(2)(3) 7.5 6 0.28 0.63
68 C 595D686(1)016C(2)(3) 10.9 6 0.26 0.65
68 D 595D686(1)016D(2)(3) 10.9 6 0.14 1.04
100 C 595D107(1)016C(2)(3) 16.0 8 0.27 0.64
100 D 595D107(1)016D(2)(3) 16.0 8 0.14 1.04
100 R 595D107(1)016R(2)(3) 16.0 8 0.14 1.30
120 R 595D127(1)016R(2)(3) 19.2 8 0.14 1.34
150 D 595D157(1)016D(2)(3) 24.0 8 0.14 1.04
150 R 595D157(1)016R(2)(3) 24.0 8 0.13 1.39
180 R 595D187(1)016R(2)(3) 28.8 8 0.13 1.39
220 R 595D227(1)016R(2)(3) 35.2 8 0.12 1.44
330 R 595D337(1)016R(2)(3) 52.8 14 0.11 1.51
20 VDC AT + 85 °C, 13 VDC AT + 125 °C
0.68 T 595D684(1)020T(2)(3) 0.5 4 10.80 0.05
1.0 T 595D105(1)020T(2)(3) 0.5 4 9.00 0.06
2.2 A 595D225(1)020A(2)(3) 0.5 6 3.80 0.14
3.3 A 595D335(1)020A(2)(3) 0.7 6 3.80 0.14
4.7 A 595D475(1)020A(2)(3) 0.9 6 3.10 0.16
4.7 B 595D475(1)020B(2)(3) 0.9 6 0.95 0.30
6.8 A 595D685(1)020A(2)(3) 1.4 6 3.00 0.16
6.8 B 595D685(1)020B(2)(3) 1.4 6 0.95 0.30
10 B 595D106(1)020B(2)(3) 2.0 6 1.00 0.29
15 B 595D156(1)020B(2)(3) 3.0 6 1.00 0.29
22 B 595D226(1)020B(2)(3) 4.4 6 0.90 0.31
22 C 595D226(1)020C(2)(3) 4.4 6 0.38 0.54
47 C 595D476(1)020C(2)(3) 9.4 6 0.35 0.56
47 D 595D476(1)020D(2)(3) 9.4 6 0.19 0.89
68 C 595D686(1)020C(2)(3) 13.6 6 0.19 0.76
68 D 595D686(1)020D(2)(3) 13.6 6 0.19 0.89
68 R 595D686(1)020R(2)(3) 13.6 6 0.20 1.12
100 D 595D107(1)020D(2)(3) 20.0 8 0.18 0.91
100 R 595D107(1)020R(2)(3) 20.0 8 0.14 1.34
120 R 595D127(1)020R(2)(3) 24.0 8 0.14 1.34
150 R 595D157(1)020R(2)(3) 30.0 8 0.14 1.34
180 R 595D187(1)020R(2)(3) 36.0 8 0.14 1.34
25 VDC AT + 85 °C, 17 VDC AT + 125 °C
0.47 T 595D474(1)025T(2)(3) 0.5 4 13.50 0.05
1.0 A 595D105(1)025A(2)(3) 0.5 4 4.20 0.13
1.5 A 595D155(1)025A(2)(3) 0.5 6 3.80 0.14
2.2 A 595D225(1)025A(2)(3) 0.6 6 3.80 0.14
2.2 B 595D225(1)025B(2)(3) 0.6 6 2.30 0.19
3.3 B 595D335(1)025B(2)(3) 0.8 6 1.90 0.21
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”; for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 6Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25 VDC AT + 85 °C, 17 VDC AT + 125 °C
4.7 B 595D475(1)025B(2)(3) 1.2 6 1.80 0.22
4.7 C 595D475(1)025C(2)(3) 1.3 5 0.68 0.40
6.8 B 595D685(1)025B(2)(3) 1.7 6 1.50 0.24
6.8 C 595D685(1)025C(2)(3) 1.7 6 0.63 0.42
10 B 595D106(1)025B(2)(3) 2.5 6 1.50 0.24
10 C 595D106(1)025C(2)(3) 2.5 6 0.57 0.44
15 C 595D156(1)025C(2)(3) 3.8 6 0.56 0.44
22 C 595D226(1)025C(2)(3) 5.5 6 0.50 0.47
22 D 595D226(1)025D(2)(3) 5.5 6 0.28 0.73
33 C 595D336(1)025C(2)(3) 8.3 6 0.45 0.49
33 D 595D336(1)025D(2)(3) 8.3 6 0.27 0.75
47 D 595D476(1)025D(2)(3) 11.8 6 0.26 0.76
47 R 595D476(1)025R(2)(3) 11.8 6 0.20 1.12
68 D 595D686(1)025D(2)(3) 17.0 8 0.26 0.76
68 R 595D686(1)025R(2)(3) 17.0 6 0.20 1.12
100 R 595D107(1)025R(2)(3) 25.0 8 0.20 1.12
35 VDC AT + 85 °C, 23 VDC AT + 125 °C
0.33 T 595D334(1)035T(2)(3) 0.5 4 14.40 0.05
0.47 A 595D474(1)035A(2)(3) 0.5 4 4.30 0.13
0.68 A 595D684(1)035A(2)(3) 0.5 4 4.20 0.13
1.0 A 595D105(1)035A(2)(3) 0.5 4 4.10 0.14
1.5 A 595D155(1)035A(2)(3) 0.5 6 3.80 0.14
1.5 B 595D155(1)035B(2)(3) 0.5 6 2.80 0.17
2.2 B 595D225(1)035B(2)(3) 0.8 6 2.30 0.19
3.3 B 595D335(1)035B(2)(3) 1.2 6 2.40 0.19
3.3 C 595D335(1)035C(2)(3) 1.2 6 0.75 0.38
4.7 B 595D475(1)035B(2)(3) 1.6 6 2.20 0.20
4.7 C 595D475(1)035C(2)(3) 1.6 6 0.66 0.41
6.8 C 595D685(1)035C(2)(3) 2.4 6 0.63 0.42
10 D 595D106(1)035D(2)(3) 3.5 6 0.43 0.59
15 C 595D156(1)035C(2)(3) 5.3 6 0.60 0.43
15 D 595D156(1)035D(2)(3) 5.3 6 0.41 0.60
22 D 595D226(1)035D(2)(3) 7.7 6 0.32 0.68
22 R 595D226(1)035R(2)(3) 7.7 6 0.28 0.94
33 R 595D336(1)035R(2)(3) 11.6 6 0.28 0.94
47 R 595D476(1)035R(2)(3) 16.5 6 0.28 0.94
50 VDC AT + 85 °C, 33 VDC AT + 125 °C
0.10 T 595D104(1)050T(2)(3) 0.5 4 22.50 0.04
0.15 T 595D154(1)050T(2)(3) 0.5 4 18.00 0.04
0.22 T 595D224(1)050T(2)(3) 0.5 4 15.30 0.04
0.22 A 595D224(1)050A(2)(3) 0.5 4 9.00 0.09
0.33 A 595D334(1)050A(2)(3) 0.5 4 8.10 0.10
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”; for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 7Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
50 VDC AT + 85 °C, 33 VDC AT + 125 °C
0.47 A 595D474(1)050A(2)(3) 0.5 4 7.20 0.10
0.68 A 595D684(1)050A(2)(3) 0.5 4 6.10 0.11
0.68 B 595D684(1)050B(2)(3) 0.5 4 5.40 0.13
1.0 A 595D105(1)050A(2)(3) 0.5 4 6.00 0.11
1.0 B 595D105(1)050B(2)(3) 0.5 4 5.00 0.13
1.5 B 595D155(1)050B(2)(3) 0.8 6 4.10 0.14
1.5 C 595D155(1)050C(2)(3) 0.8 6 1.80 0.25
2.2 B 595D225(1)050B(2)(3) 1.1 6 3.20 0.16
2.2 C 595D225(1)050C(2)(3) 1.1 6 1.70 0.25
3.3 C 595D335(1)050C(2)(3) 1.7 6 1.60 0.26
4.7 C 595D475(1)050C(2)(3) 2.4 6 1.40 0.28
6.8 C 595D685(1)050C(2)(3) 3.4 6 1.30 0.29
6.8 D 595D685(1)050D(2)(3) 3.4 6 0.82 0.43
10 D 595D106(1)050D(2)(3) 5.0 6 0.80 0.43
10 R 595D106(1)050R(2)(3) 5.0 6 0.65 0.62
15 R 595D156(1)050R(2)(3) 7.5 6 0.40 0.79
22 R 595D226(1)050R(2)(3) 11.0 6 0.39 0.80
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.6
10 6.0
16 10
20 12
25 15
35 24
50 28
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.3
10 5.0
16 8.0
20 10
25 12
35 15
50 24
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”; for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 8Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY
“T” Case
10 000
1000
100
10
1.0
IMPEDANCE
ESR
0.1 μF, 50 VDC
3.3 μF, 6.3 VDC
FREQUENCY IN Hz
100 1K 10K 100K 1M 10M
“A” Case
1000
100
10
1.0
0.1
IMPEDANCE
ESR
1
μF, 35 VDC
15 μF, 6.3 VDC
FREQUENCY IN Hz
100 1K 10K 100K 1M 10M
100 1K 10K 100K 1M 10M
1000
100
10
1
0.1
2.2 μF, 35 VDC
22 μF, 6.3 VDC
IMPEDANCE
ESR
FREQUENCY IN Hz
“B” Case
“C” Case
1.0
10
100
1000
0.1
0.01
IMPEDANCE
ESR
10 μF, 25 VDC
FREQUENCY IN Hz
100 μF, 6.3 VDC
100 1K 10K 100K 1M 10M
“D” Case
FREQUENCY IN Hz
100
10
1.0
0.1
0.01
IMPEDANCE
ESR
220 μF, 6.3 VDC
22
μ
F, 25 VDC
100 1K 10K 100K 1M 10M
“R” Case
FREQUENCY IN Hz
100
10
1.0
0.1
0.01
IMPEDANCE
ESR
33 μF, 35 VDC
390 μF, 6.3 VDC
100 1K 10K 100K 1M 10M
595D
www.vishay.com Vishay Sprague
Revision: 30-May-12 9Document Number: 40007
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
A0.075
B0.085
C0.110
D0.150
G0.115
M0.095
R0.250
S0.060
T0.030
STANDARD PACKAGING QUANTITY
CASE CODE UNITS PER REEL
7" REEL 13" REEL
A 2000 9000
B 2000 8000
C 500 3000
D 500 2500
G 500 2500
M 2000 8000
R 600 n/a
S 2500 10 000
T 2500 10 000
PRODUCT INFORMATION
Conformal Coated Guide www.vishay.com/doc?40150
Moisture Sensitivity www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
