Specification of Automotive MLCC (Referance sheet) Supplier : Samsung Electro-Mechanics Samsung P/N : CL32Y106KBJ4PNE Product : Multi-layer Ceramic Capacitor Description : CAP, 10, 50V, 10%, X7S, 1210 AEC-Q200 Qualified A. Dimension Dimension Size 1210 inch L 3.200.30 mm W 2.500.20 mm T 2.500.20 mm BW 0.600.30 mm B. Samsung Part Number CL 32 Y 106 K B J 4 P N E Series Samsung Multi-layer Ceramic Capacitor Size 1210 Dielectric (inch code) X7S Capacitance 10 Capacitance 10% Thickness W :2.500.20 mm Inner electrode Ni Termination Metal-Epoxy Plating Sn 100% Product tolerance Rated Voltage L : 3.200.30 mm 50 V 2.500.20 mm (Pb Free) Automotive Special code Normal Packaging Embossed Type, 7" Reel C. Reliability Test and Judgement condition Performance Test items Test condition High Temperature Appearance : No abnormal exterior appearance Unpowered, 1,000hrs @ Max. temperature Exposure Capacitance Change Within 10 % Measurement at 242hrs after test conclusion Tan : 0.1 max. IR :More than 10,000 or 500 x Whichever is smaller Temperature Cycling Appearance : No abnormal exterior appearance Capacitance Change Within 10 % Initial Measurement 2* Final Measurement 3* 1,000Cycles Initial Measurement 2* Tan : 0.1 max. Final Measurement 3* IR : More than 10,000 or 500 x Measurement at 242hrs after test conclusion Whichever is smaller 1 cycle condition : -55+0/-3(303min) Room Temp. (1min) 125+3/-0(303min) Room Temp. (1min) Destructive Physical No Defects or abnormalities Per EIA 469 Analysis Humidity Bias Appearance : No abnormal exterior appearance 1,000hrs 85/85%RH, Rated Voltage and 1.3~1.5V, Capacitance Change Within 12.5 % Add 100kohm resistor Tan : 0.1 max. Initial Measurement 2* IR :More than 500 or 25 x Final Measurement 4* Whichever is smaller Measurement at 242hrs after test conclusion The charge/discharge current is less than 50mA. High Temperature Appearance : No abnormal exterior appearance 1,000hrs @ 125, 120% Rated Voltage, Operating Life Capacitance Change Within 12.5 % Initial Measurement 2* Tan : 0.1 max. Final Measurement 4* IR :More than 1,000 or 50 x Measurement at 242hrs after test conclusion Whichever is smaller The charge/discharge current is less than 50mA. Performance External Visual Test condition No abnormal exterior appearance Microscope (10) Physical DimensionsWithin the specified dimensions Mechanical Shock Using The calipers Appearance : No abnormal exterior appearance Three shocks in each direction should be applied along Capacitance Change Within 10 % 3 mutually perpendicular axes of the test specimen (18 shocks) Tan , IR : Initial spec. Peak value Duration Wave Velocity 1,500G 0.5ms Half sine 4.7m/sec Initial Measurement 2* Final Measurement 5* Vibration Appearance : No abnormal exterior appearance 5g's for 20min., 12cycles each of 3 orientations, Capacitance Change Within 10 % Use 8"x5" PCB 0.031" Thick 7 secure points on one long side Tan , IR : Initial spec. and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10~2,000. Initial Measurement 2* Final Measurement 5* Resistance to Appearance : No abnormal exterior appearance Solder Heat Capacitance Change Within 10 % preheating : 150 for 60~120 sec. Solder pot : 2605, 101sec. Tan , IR : Initial spec. Initial Measurement 2* Final Measurement 3* Appearance : No abnormal exterior appearance ESD Solderability Capacitance Change Within 10 % AEC-Q200-002 or ISO/DIS10605 Initial Measurement 2* Tan , IR : Initial spec. Final Measurement 4* 95% of the terminations is to be soldered a) Preheat at 155 for 4 hours, Immerse in solder for 5s at 2455 evenly and continuously b) Steam aging for 8 hours, Immerse in solder for 5s at 2455 c) Steam aging for 8 hours, Immerse in solder for 120s at 2605 solder : a solution ethanol and rosin Electrical Capacitance : Within specified tolerance *A capacitor prior to measuring the capacitance is heat treated at Characterization Tan : 0.1 max. 150 +0/-10 for 1hour and maintained in ambient air for 242 hours IR(25) : More than 10,000 or 500 x The Capacitance / D.F. should be measured at 25, Whichever is smaller 1 10%, IR(125) More than 1,000 or 10 x Whichever is smaller Board Flex 1 0.2 Vrms I.R. should be measured with a DC voltage not exceeding Rated Voltage @25, @125 for 60~120 sec. Dielectric Strength Dielectric Strength : 250% of the rated voltage for 1~5 seconds Appearance : No abnormal exterior appearance Bending to the limit, 2 for 60 seconds 1* Capacitance Change Within 10 % Initial Measurement 2* Final Measurement 5* Terminal Appearance : No abnormal exterior appearance 18 N, for 60 sec. Strength(SMD) Capacitance Change Within 10 % Initial Measurement 2* Beam Load Destruction value should be exceed Temperature X7S Characteristics From -55 to 125 , Capacitance change should be within 22% Final Measurement 5* 54.5 N Beam speed : 2.50.25 /sec D. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260 +0/-5, 30sec. ), Meet IPC/JEDEC J-STD-020 D Standard *1 : The figure indicates typical specification. Please refer to individual specifications. *2 : Initial measurement : Perform a heat treatment at 150 +0/-10 for one hour after soldering process. and then let sit for 242 hours at room temperature. Perform the initial measurement. *3 : Final measurement : Let sit for 242 hours at room temperature after test conclusion, then measure. *4 : Final measurement : Perform a heat treatment at 150 +0/-10 for one hour after soldering process. and then let sit for 242 hours at room temperature. Perform the initial measurement. *5 : Final measurement : Let measure within 24 hours at room temperature after test conclusion. Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36