The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height LX Series Overview Hirose's next generation of interface connectors further reduces the mounting height of the receptacle by approximately 30% (compared with the 3200 Series receptacle). High durability, secure mating, electrostatic protection and ease of operation guarantees reliable and consistent performance in demanding consumer applications. 1. Low profile on the PCB When mounted on the PCB surface the receptacle height is 2.0 mm. 2 Features 2.9 Lower Profile Existing 3200 Series LX Series 2. Strong Construction Use of metal shell and advanced plastics guarantees that fully mated connectors will withstand 30 N max. force applied on the plug in any direction. Strong Construction 3. High durability 5000 mating/un-mating cycles without any degradation of electrical or mechanical performance. Tactile sensation when mating confirms complete mated condition and assures secure retention of the plug. 30N 4. Sequenced contact mating The protection of the circuit is assured by having the 2 contact at each end of the receptacle protrude forward by 0.5 mm, with electrical wipe of 1.45 mm. Location of the circuit protection contacts can be changed as required. Remaining contacts electrical wipe is 0.95 mm. 30N 5. Incorrect Insertion Prevention Connectors will not be damaged when angled or reverse plug insertion is attempted. Incorrect insertion prevention 6. Safety plug release Plug will release when an excessive pull force is applied to the cable. 7. RoHS Compliant All components and materials comply with the requirements of the EU Directive 2002/95/EC. Angled insertion Reversed insertion 2008.5w 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willInterface be discontinued soon. Please check the 2.0 products on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX SeriesUltra Low-profile Connectors with mmstatus Mounting Height Product specifications 0.5A Current rating Operating temperature range : -40c to +70c (1A max. can be carried via 2 random contacts) Ratings Voltage rating 50V AC Characteristic 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage Storage temperature range : -55c to +85c (Note) Specification Conditions 70mo max. 100mA DC 1000 Mo min. (dry) 100V DC 10 Mo min. (high humidity) No flashover or insulation breakdown. 250V AC / one minute 4.Mating/un-mating forces Mating: 10N max., un-mating: 4N min. 5. Durability (mating/un-mating) 6. Shock 7. Vibration 8. Temperature cycle 9. Salt spray With corresponding connector. Amount of change of contact resistance: 20mo max. 5, 000 times No electrical discontinuity of 1 sec. Max. Acceleration of 490 m/s2, 11 ms duration, Contact resistance: 20mo max. sine half-wave waveform, 3 cycles, 3 axis. Contact resistance: 20mo max. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, Insulation resistance: 10Mo min. acceleration of 98 m/s2, 2 hours, 3 axis. Contact resistance: 20mo max. Temperature: - 55c +5c to +35c +85c +5c to +35c Insulation resistance: 10Mo min. Time No heavy corrosions 5% water solution at 35C for 48 hours : 30 5 30 5 (Minutes) Note : Includes temperature rise caused by current flow. Materials / Finish Receptacles Component Insulator Material Synthetic resin Contacts Copper alloy Shell Stainless steel Component Insulator Material Synthetic resin Contacts Copper alloy Metal shield Covers Strain relief clamp Self tapping screws Stainless steel Synthetic resin Copper alloy Steel Finish/Color Black Contact area: Gold plated Mounting area: Gold flash plated Soldering area: Gold flash plated Remarks UL94V-0 --------------------------- Plugs Finish/Color Black Contact area: Gold plated Termination area: Gold flash plated -------------Black -------------Trivalent black chromate Ordering information Receptacles LX 60 - 16 S 1 2 3 3 3 Number of contacts : 12, 16, 20 4 Contact type P : Male contact (Plug) 4 S : Female contact (Receptacle) 5 LX 40 - 16 BS(4.5) 2 Termination type 60 : Right angle SMT Bushing 1 2 2 3 : LX 40 : Solder type LX 40 - 16 P 2 Series number 4 Plugs 1 1 5 Bushing : Dia. 4.0mm cable BS(4.0) BS(4.5) BS(5.0) Remarks UL94V-0 --------------------------UL94V-0 -------------Screw size: M2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HiroseLow-profile website RoHS search at www.hirose-connectors.com, contact yourMounting Hirose sales Height representative. LX SeriesUltra Interface Connectors withor 2.0 mm Receptacles 12 pos. (5.5) 2.55 P=0.5 No.12 6.5 No.1 .5 2 R0 O1 0.8 4 10.6 3.6 BRecommended PCB mounting pattern Packaging RoHS LX60-12S CL245-0018-3 LX60-16S CL245-0001-0 Reel packaging (2000 pieces/reel) YES LX60-20S CL245-0016-8 (5.5) 2O1 .1 Ho le P=0.5 0.35 1.2 CL No. PCB edge 0.3 3.8 2.8 1.5 5.7 Part number 4 6.5 7.8 1.9 1.9 No conductive traces in this area 16 pos. 20 pos. (7.5) (9.5) 2.55 P=0.5 2.55 P=0.5 6.5 No.1 .5 R0 (9.5) O1 .1 P=0.5 le 1.9 Land area 5.7 PCB edge 1.9 7 10.5 11.8 No conductive traces in this area 0.3 3.8 2.8 1.5 5.7 No conductive traces in this area 0.3 3.8 2.8 1.5 1.9 5 8.5 9.8 0.35 Ho le PCB edge O1 3.6 BRecommended PCB mounting pattern 2- 1.2 0.35 Ho 6.7 14.6 1.2 (7.5) P=0.5 0.8 O1 3.6 BRecommended PCB mounting pattern 2-O .5 R0 2 0.8 5 12.6 6.5 No.1 No.20 2 No.16 1.1 Land area 1.9 Land area 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willInterface be discontinued soon. Please check the 2.0 products on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX SeriesUltra Low-profile Connectors with mmstatus Mounting Height Plugs O5 .9 12 pos. 8 14.8 3.2 ) 21.4 (R 5.1 * Cable with overmolded bushing shown for reference only. Not supplied. ) 6.2 4 1. (R Part number CL No. LX40-12P CL245-0019-6 LX40-16P CL245-0002-3 LX40-20P CL245-0017-0 RoHS 1 YES No.1 20 pos. O6 .4 O6 8 16.8 (R 3. No.12 .9 16 pos. Packaging (R 3. 18.8 8.4 8) 21.4 21.4 8) No.1 No.16 No.1 6.2 5.5 (R 1. 4) (R 6.2 5.1 ) 4 1. No.20 Bushing 4 Part number CL No. LX40-12BS(4.0) CL245-0020-5 LX40-16BS(4.5) CL245-0021-8 LX40-20BS(5.0) CL245-0022-0 Packaging RoHS 100 pieces / bag YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HiroseLow-profile website RoHS search at www.hirose-connectors.com, contact yourMounting Hirose sales Height representative. LX SeriesUltra Interface Connectors withor 2.0 mm BReceptacle Packaging Specifications Embossed carrier tape dimensions Unreeling directions C .5 O1 1.75 4 4 A B 2 (mm) Part number A B C 24 11.5 12 LX60-12S LX60-16S LX60-20S Reel dimensions 30 O80 O380 Unreeling directions D (Inside dimension) 3 O1 E (Outside dimension) (mm) Part number D E 25.5 29.5 LX60-12S LX60-16S LX60-20S 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willInterface be discontinued soon. Please check the 2.0 products on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX SeriesUltra Low-profile Connectors with mmstatus Mounting Height Receptacles Recommended Temperature Profile (c) HRS test conditions PEAK:250 +50 c 250 Solder composition 230c min. Paste, 96.5%Sn/3.0%Ag/0.5%Cu 200 180c Test board 150c 150 Glass epoxy 35mm x 35mm x 0.8mm thick 9030s 100 9010s The temperature profiles are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Contact your solder paste and equipment manufacture for specific recommendations. 50 BApplicable Plug Cable (mm) Part number Cable diameter LX40-12P O4 max. LX40-16P O4.5 max. LX40-20P O5 max. Wire size O0.6 mm max. (AWG 30 to 32 or equivalent) Note 1: Applicable cable sizes are guidelines. (There may be slight differences depending on the cable outer insulation) Note 2: Cables must be attached using single piece overmolded bushings on the cable. Note 3: Please refer to applicable Cable Termination Procedures Manual for correct plug assembly and cable termination. Note 4: Contact HRS for cable assemblies. BMated Condition Dimensions 1.4 Plug 0.5 2 Receptacle 2 (mm) 6