1
NEW
2008.5w
■Features
1. Low profile on the PCB
When mounted on the PCB surface the receptacle height
is 2.0 mm.
2. Strong Construction
Use of metal shell and advanced plastics guarantees that
fully mated connectors will withstand 30 N max. force
applied on the plug in any direction.
3. High durability
5000 mating/un-mating cycles without any degradation of
electrical or mechanical performance.
Tactile sensation when mating confirms complete mated
condition and assures secure retention of the plug.
4. Sequenced contact mating
The protection of the circuit is assured by having the 2
contact at each end of the receptacle protrude forward by
0.5 mm, with electrical wipe of 1.45 mm. Location of the
circuit protection contacts can be changed as required.
Remaining contacts electrical wipe is 0.95 mm.
5. Incorrect Insertion Prevention
Connectors will not be damaged when angled or reverse
plug insertion is attempted.
6. Safety plug release
Plug will release when an excessive pull force is applied
to the cable.
7. RoHS Compliant
All components and materials comply with the
requirements of the EU Directive 2002/95/EC.
2.9
Existing 3200 Series LX Series
2
30N
30N
■Overview
Hirose’s next generation of interface connectors
further reduces the mounting height of the
receptacle by approximately 30% (compared with
the 3200 Series receptacle).
High durability, secure mating, electrostatic
protection and ease of operation guarantees
reliable and consistent performance in demanding
consumer applications.
Angled insertion Reversed insertion
Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
LX Series
Lower Profile
Strong Construction
Incorrect insertion prevention
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
■Product specifications
■Materials / Finish
Insulator
Contacts
Shell
Synthetic resin
Copper alloy
Stainless steel
Black
Contact area: Gold plated
Mounting area: Gold flash plated
Soldering area: Gold flash plated
UL94V-0
--------------
--------------
Component Material Finish/Color Remarks
Note : Includes temperature rise caused by current flow.
■Ordering information
-S1660LX
1 2 3 4
-P1640LX
1 2 3 4
●Receptacles
●Plugs
-BS(4.5)
1640LX
1 2 3 5
●Bushing
Ratings Current rating
Voltage rating
0.5A
(1A max. can be carried via 2 random contacts)
50V AC
Operating temperature range : –40ç to +70ç
Storage temperature range : –55ç to +85ç (Note)
●Plugs
●Receptacles
Insulator
Contacts
Metal shield
Covers
Strain relief clamp
Self tapping screws
Synthetic resin
Copper alloy
Stainless steel
Synthetic resin
Copper alloy
Steel
Black
Contact area: Gold plated
Termination area: Gold flash plated
--------------
Black
--------------
Trivalent black chromate
UL94V-0
--------------
--------------
UL94V-0
--------------
Screw size: M2
Component Material Finish/Color Remarks
70mø max.
1000 Mø min. (dry)
10 Mø min. (high humidity)
No flashover or insulation breakdown.
Mating: 10N max., un-mating: 4N min.
Amount of change of contact resistance: 20mø max.
No electrical discontinuity of 1μ sec. Max.
Contact resistance: 20mø max.
Contact resistance: 20mø max.
Insulation resistance: 10Mø min.
Contact resistance: 20mø max.
Insulation resistance: 10Mø min.
No heavy corrosions
100mA DC
100V DC
250V AC / one minute
With corresponding connector.
5, 000 times
Acceleration of 490 m/s2, 11 ms duration,
sine half-wave waveform, 3 cycles, 3 axis.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
acceleration of 98 m/s2, 2 hours, 3 axis.
Temperature: –55ç ➝+5ç to +35ç ➝+85ç ➝+5ç to +35ç
Time : 30 ➝5➝30 ➝5 (Minutes)
5% water solution at 35°C for 48 hours
1.Contact resistance
2.Insulation resistance
3.
Withstanding voltage
4.
Mating/un-mating forces
5. Durability
(mating/un-mating)
6. Shock
7. Vibration
8. Temperature cycle
9. Salt spray
Characteristic Specification Conditions
Series number : LX
Termination type
40 : Solder type
60 : Right angle SMT
Number of contacts : 12, 16, 20
Contact type
P : Male contact (Plug)
S : Female contact (Receptacle)
Bushing : Dia. 4.0mm cable
BS(4.0)
BS(4.5)
BS(5.0)
1
2
3
4
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
■Receptacles
Part number CL No. Packaging RoHS
LX60-12S
LX60-16S
LX60-20S
CL245-0018-3
CL245-0001-0
CL245-0016-8
Reel packaging (2000 pieces/reel)
YES
4
2.55(5.5)
P=0.5
10.6
No.12
2
No.1
Ø1
0.8
R0.5
6.5
3.6
(5.5)
P=0.5 0.35
1.2
0.3 5.7
1.91.9
4
2.8
2-Ø1.1 Hole
6.5
7.8
1.5
3.8
No conductive traces in this area Land area
PCB edge
BRecommended PCB mounting pattern
●12 pos.
P=0.5
(7.5)
5
2
2.55
No.1
12.6
No.16
0.8
Ø1
R0.5
6.5
3.6
No conductive traces in this area Land area
(7.5)
P=0.5 0.35
PCB edge
9.8
8.5
3.8
0.3 5.7
1.9
1.2
1.9
5
2.8
2-Ø1.1 Hole
1.5
BRecommended PCB mounting pattern
●16 pos.
(9.5)
P=0.5
2.55
6.7
14.6
No.20
2
No.1
0.8
Ø1
R0.5
6.5
3.6
1.2
(9.5)
P=0.5 0.35
PCB edge
3.8
0.3 5.7
1.91.9
7
2.8
2-Ø1.1
Hole
10.5
11.8
1.5
No conductive traces in this area Land area
BRecommended PCB mounting pattern
●20 pos.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
4
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
*Cable with overmolded bushing shown for reference only.
Not supplied.
■Plugs
Part number CL No. Packaging RoHS
LX40-12P
LX40-16P
LX40-20P
CL245-0019-6
CL245-0002-3
CL245-0017-0
1 YES
●12 pos.
●16 pos. ●20 pos.
Ø5.9
14.8
(R3.2)
6.2 21.4
(R1.4)
No.12
8
5.1
No.1
No.1
(R1.4)
16.8
(R3.8)
21.46.2
Ø6.4
No.16
8
5.1
21.46.2
(R1.4)
(R3.8)
18.8
Ø6.9
5.5
8.4
No.20No.1
■Bushing
Part number CL No. Packaging RoHS
LX40-12BS(4.0)
LX40-16BS(4.5)
LX40-20BS(5.0)
CL245-0020-5
CL245-0021-8
CL245-0022-0
100 pieces / bag YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
BReceptacle Packaging Specifications
●Embossed carrier tape dimensions
●Reel dimensions
4
C
Unreeling directions
4
2
Ø1.5
B 1.75
A
Part number D E
LX60-12S
LX60-16S
LX60-20S
25.5 29.5
(mm)
Part number A B C
LX60-12S
LX60-16S
LX60-20S
24 12
(mm)
11.5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
■Receptacles Recommended Temperature Profile
BApplicable Plug Cable
BMated Condition Dimensions
Cable diameter Wire sizePart number
Ø4 max.
Ø4.5 max.
Ø5 max.
Ø0.6 mm max. (AWG 30 to 32 or equivalent)
LX40-12P
LX40-16P
LX40-20P
Note 1: Applicable cable sizes are guidelines. (There may be slight differences depending on the cable outer insulation)
Note 2: Cables must be attached using single piece overmolded bushings on the cable.
Note 3: Please refer to applicable Cable Termination Procedures Manual for correct plug assembly and cable termination.
Note 4: Contact HRS for cable assemblies.
(ç)
250
200
150
100
50
180ç
150ç
230ç min.
90±30s 90±10s
PEAK:250 ç
+5
0
0.5
Plug 2
1.4
(mm)
Receptacle
2
HRS test conditions
Solder composition
Paste, 96.5%Sn/3.0%Ag/0.5%Cu
Test board
Glass epoxy 35mm x 35mm x 0.8mm thick
The temperature profiles are based on the above
conditions. In individual applications the actual
temperature may vary, depending on solder
paste type, volume/thickness and board
size/thickness. Contact your solder paste and
equipment manufacture for specific
recommendations.
(mm)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.