3.8x2.0mm DOME LENS SMD CHIP LED LAMP APED3820SEC SUPER BRIGHT ORANGE Features Description !3.8mmx2.0mm SMT LED,3.2mm THICKNESS. The Super Bright Orange source color devices are made !LOW with DH InGaAlP on GaAs substrate Light Emitting Diode. POWER CONSUMPTION. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. ! PACKAGE : 500PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB0727 APPROVED : J. Lu REV NO: V.4 CHECKED : Allen Liu DATE: APR/03/2003 DRAWN: F.Y.YUAN PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e A P E D 3820S E C Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT ORANGE (InGaAIP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2 1 / 2 480 800 60 (H) 35 (V) Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er D ev i c e Ty p . peak Peak Wavelength Super Bright Orange D Dominate Wavelength 1/2 Max . Un its Tes t Co n d it io n s 610 nm I F =20mA Super Bright Orange 601 nm I F =20mA Spectral Line Half-width Super Bright Orange 29 nm I F =20mA C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.0 2.5 V I F =20mA IR Reverse Current Super Bright Orange 10 uA V R = 5V Absolute Maximum Ratings at TA=25C P ar am et er Su p er B r ig h t Or an g e Un its Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB0727 APPROVED : J. Lu REV NO: V.4 CHECKED : Allen Liu DATE: APR/03/2003 DRAWN: F.Y.YUAN PAGE: 2 OF 4 Super Bright Orange SPEC NO: DSAB0727 APPROVED : J. Lu APED3820SEC REV NO: V.4 CHECKED : Allen Liu DATE: APR/03/2003 DRAWN: F.Y.YUAN PAGE: 3 OF 4 APED3820SEC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB0727 APPROVED : J. Lu REV NO: V.4 CHECKED : Allen Liu DATE: APR/03/2003 DRAWN: F.Y.YUAN PAGE: 4 OF 4