M PIC16F72 Data Sheet 28-Pin, 8-Bit CMOS FLASH Microcontroller with A/D Converter 2002 Microchip Technology Inc. DS39597B Note the following details of the code protection feature on PICmicro(R) MCUs. * * * * * * The PICmicro family meets the specifications contained in the Microchip Data Sheet. Microchip believes that its family of PICmicro microcontrollers is one of the most secure products of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the PICmicro microcontroller in a manner outside the operating specifications contained in the data sheet. The person doing so may be engaged in theft of intellectual property. Microchip is willing to work with the customer who is concerned about the integrity of their code. Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable". Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our product. If you have any further questions about this matter, please contact the local sales office nearest to you. Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is assumed by Microchip Technology Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Microchip's products as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, FilterLab, KEELOQ, microID, MPLAB, PIC, PICmicro, PICMASTER, PICSTART, PRO MATE, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. dsPIC, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, microPort, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, MXDEV, MXLAB, PICC, PICDEM, PICDEM.net, rfPIC, Select Mode and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. Serialized Quick Turn Programming (SQTP) is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. (c) 2002, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received QS-9000 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona in July 1999 and Mountain View, California in March 2002. The Company's quality system processes and procedures are QS-9000 compliant for its PICmicro(R) 8-bit MCUs, KEELOQ(R) code hopping devices, Serial EEPROMs, microperipherals, non-volatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001 certified. DS39597B - page ii 2002 Microchip Technology Inc. M PIC16F72 28-Pin, 8-Bit CMOS FLASH MCU with A/D Converter * PIC16F72 High Performance RISC CPU: PDIP, SOIC, SSOP *1 2 3 4 5 6 7 8 9 10 11 12 13 14 MCLR/VPP RA0/AN0 RA1/AN1 RA2/AN2 RA3/AN3/VREF RA4/T0CKI RA5/AN4/SS VSS OSC1/CLKI OSC2/CLKO RC0/T1OSO/T1CKI RC1/T1OSI RC2/CCP1 RC3/SCK/SCL QFN Peripheral Features: CMOS Technology: * * * * * Low power, high speed CMOS FLASH technology Fully static design Wide operating voltage range: 2.0V to 5.5V Industrial temperature range Low power consumption: - < 0.6 mA typical @ 3V, 4 MHz - 20 A typical @ 3V, 32 kHz - < 1 A typical standby current 2002 Microchip Technology Inc. RA2/AN2 RA3/AN3/VREF RA4/T0CKI RA5/AN4/SS VSS OSC1/CLKI OSC2/CLKO 28 27 26 25 24 23 22 21 20 19 18 17 16 15 RB7/PGD RB6/PGC RB5 RB4 RB3 RB2 RB1 RB0/INT VDD VSS RC7 RC6 RC5/SDO RC4/SDI/SDA 1 2 3 4 5 6 7 28 27 26 25 24 23 22 21 20 19 18 PIC16F72 17 16 15 8 9 10 11 12 13 14 RB3 RB2 RB1 RB0/INT VDD VSS RC7 RC0/T1OSO/T1CKI RC1/T1OSI RC2/CCP1 RC3/SCK/SCL RC4/SDI/SDA RC5/SDO RC6 * High Sink/Source Current: 25 mA * Timer0: 8-bit timer/counter with 8-bit prescaler * Timer1: 16-bit timer/counter with prescaler, can be incremented during SLEEP via external crystal/clock * Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler * Capture, Compare, PWM (CCP) module - Capture is 16-bit, max. resolution is 12.5 ns - Compare is 16-bit, max. resolution is 200 ns - PWM max. resolution is 10-bit * 8-bit, 5-channel analog-to-digital converter * Synchronous Serial Port (SSP) with SPITM (Master/Slave) and I2CTM (Slave) * Brown-out detection circuitry for Brown-out Reset (BOR) PIC16F72 * Only 35 single word instructions to learn * All single cycle instructions except for program branches, which are two-cycle * Operating speed: DC - 20 MHz clock input DC - 200 ns instruction cycle * 2K x 14 words of Program Memory, 128 x 8 bytes of Data Memory (RAM) * Pinout compatible to PIC16C72/72A and PIC16F872 * Interrupt capability * Eight-level deep hardware stack * Direct, Indirect and Relative Addressing modes Pin Diagrams RA1/AN1 RA0/AN0 MCLR/VPP RB7/PGD RB6/PGC RB5 RB4 Device Included: Special Microcontroller Features: * 1,000 erase/write cycle FLASH program memory typical * Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) * Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation * Programmable code protection * Power saving SLEEP mode * Selectable oscillator options * In-Circuit Serial ProgrammingTM (ICSPTM) via 2 pins * Processor read access to program memory DS39597B-page 1 PIC16F72 Key Reference Manual Features PIC16F72 Operating Frequency RESETS and (Delays) FLASH Program Memory - (14-bit words, 1000 E/W cycles) Data Memory - RAM (8-bit bytes) Interrupts I/O Ports Timers Capture/Compare/PWM Modules Serial Communications 8-bit A/D Converter Instruction Set (No. of Instructions) DC - 20 MHz POR, BOR, (PWRT, OST) 2K 128 8 PORTA, PORTB, PORTC Timer0, Timer1, Timer2 1 SSP 5 channels 35 DS39597B-page 2 2002 Microchip Technology Inc. PIC16F72 Table of Contents 1.0 Device Overview .......................................................................................................................................................................... 5 2.0 Memory Organization ................................................................................................................................................................... 7 3.0 I/O Ports ..................................................................................................................................................................................... 21 4.0 Reading Program Memory ......................................................................................................................................................... 27 5.0 Timer0 Module ........................................................................................................................................................................... 29 6.0 Timer1 Module ........................................................................................................................................................................... 31 7.0 Timer2 Module ........................................................................................................................................................................... 35 8.0 Capture/Compare/PWM (CCP) Module ..................................................................................................................................... 37 9.0 Synchronous Serial Port (SSP) Module ..................................................................................................................................... 43 10.0 Analog-to-Digital Converter (A/D) Module.................................................................................................................................. 53 11.0 Special Features of the CPU...................................................................................................................................................... 59 12.0 Instruction Set Summary ............................................................................................................................................................ 73 13.0 Development Support................................................................................................................................................................. 81 14.0 Electrical Characteristics ............................................................................................................................................................ 87 15.0 DC and AC Characteristics Graphs and Tables....................................................................................................................... 107 16.0 Package Marking Information................................................................................................................................................... 117 Appendix A: Revision History ........................................................................................................................................................ 123 Appendix B: Conversion Considerations........................................................................................................................................ 123 Index .................................................................................................................................................................................................. 125 On-Line Support................................................................................................................................................................................. 131 Reader Response .............................................................................................................................................................................. 132 Product Identification System ............................................................................................................................................................ 133 TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors@mail.microchip.com or fax the Reader Response Form in the back of this data sheet to (480) 792-4150. We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: http://www.microchip.com You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000). Errata An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision of silicon and revision of document to which it applies. To determine if an errata sheet exists for a particular device, please check with one of the following: * Microchip's Worldwide Web site; http://www.microchip.com * Your local Microchip sales office (see last page) * The Microchip Corporate Literature Center; U.S. FAX: (480) 792-7277 When contacting a sales office or the literature center, please specify which device, revision of silicon and data sheet (include literature number) you are using. Customer Notification System Register on our web site at www.microchip.com/cn to receive the most current information on all of our products. 2002 Microchip Technology Inc. DS39597B-page 3 PIC16F72 NOTES: DS39597B-page 4 2002 Microchip Technology Inc. PIC16F72 1.0 DEVICE OVERVIEW The program memory contains 2K words, which translate to 2048 instructions, since each 14-bit program memory word is the same width as each device instruction. The data memory (RAM) contains 128 bytes. This document contains device specific information for the operation of the PIC16F72 device. Additional information may be found in the PICmicroTM Mid-Range MCU Reference Manual (DS33023), which may be downloaded from the Microchip website. The Reference Manual should be considered a complementary document to this data sheet, and is highly recommended reading for a better understanding of the device architecture and operation of the peripheral modules. There are 22 I/O pins that are user configurable on a pin-to-pin basis. Some pins are multiplexed with other device functions. These functions include: * External interrupt * Change on PORTB interrupt * Timer0 clock input * Timer1 clock/oscillator * Capture/Compare/PWM * A/D converter * SPI/I2C Table 1-1 details the pinout of the device with descriptions and details for each pin. The PIC16F72 belongs to the Mid-Range family of the PICmicro devices. A block diagram of the device is shown in Figure 1-1. FIGURE 1-1: PIC16F72 BLOCK DIAGRAM 13 FLASH Program Memory 2K x 14 Program Bus PORTA RA0/AN0 RA1/AN1 RA2/AN2 RA3/AN3/VREF RA4/T0CKI RA5/AN4/SS RAM File Registers 128 x 8 8-Level Stack (13-bit) 14 8 Data Bus Program Counter RAM Addr(1) PORTB 9 Addr MUX Instruction reg 7 Direct Addr 8 Indirect Addr FSR reg STATUS reg 8 3 Power-up Timer Instruction Decode & Control Oscillator Start-up Timer Timing Generation Watchdog Timer Brown-out Reset Power-on Reset OSC1/CLKI OSC2/CLKO MCLR MUX ALU RB0/INT RB1 RB2 RB3 RB4 RB5 RB6/PGC RB7/PGD PORTC RC0/T1OSO/T1CKI RC1/T1OSI RC2/CCP1 RC3/SCK/SCL RC4/SDI/SDA RC5/SDO RC6 RC7 8 W reg VDD, VSS Timer0 Timer1 Timer2 A/D Synchronous Serial Port CCP1 Note 1: Higher order bits are from the STATUS register. 2002 Microchip Technology Inc. DS39597B-page 5 PIC16F72 TABLE 1-1: PIC16F72 PINOUT DESCRIPTION PDIP, SOIC, SSOP Pin# MLF Pin# I/O/P Type OSC1/CLKI 9 6 I OSC2/CLKO 10 7 O -- Oscillator crystal output. Connects to crystal or resonator in Crystal Oscillator mode. In RC mode, the OSC2 pin outputs CLKO, which has 1/4 the frequency of OSC1, and denotes the instruction cycle rate. MCLR/VPP 1 26 I/P ST Master Clear (Reset) input or programming voltage input. This pin is an active low RESET to the device. RA0/AN0 2 27 I/O TTL RA1/AN1 3 28 I/O TTL RA1 can also be analog input1. RA2/AN2 4 1 I/O TTL RA2 can also be analog input2. Pin Name Buffer Type Description ST/CMOS(3) Oscillator crystal input/external clock source input. PORTA is a bi-directional I/O port. RA0 can also be analog input0. RA3/AN3/VREF 5 2 I/O TTL RA3 can also be analog input3 or analog reference voltage. RA4/T0CKI 6 3 I/O ST RA4 can also be the clock input to the Timer0 module. Output is open drain type. RA5/AN4/SS 7 4 I/O TTL RA5 can also be analog input4 or the slave select for the synchronous serial port. PORTB is a bi-directional I/O port. PORTB can be software programmed for internal weak pull-up on all inputs. RB0/INT 21 18 I/O TTL/ST(1) RB1 22 19 I/O TTL RB2 23 20 I/O TTL RB3 24 21 I/O TTL RB4 25 22 I/O TTL Interrupt-on-change pin. RB5 26 23 I/O TTL Interrupt-on-change pin. RB6/PGC 27 24 I/O TTL/ST(2) RB7/PGD 28 25 I/O TTL/ST(2) RB0 can also be the external interrupt pin. Interrupt-on-change pin. Serial programming clock. Interrupt-on-change pin. Serial programming data. PORTC is a bi-directional I/O port. RC0/T1OSO/ T1CKI 11 8 I/O ST RC0 can also be the Timer1 oscillator output or Timer1 clock input. RC1/T1OSI 12 9 I/O ST RC1 can also be the Timer1 oscillator input. RC2/CCP1 13 10 I/O ST RC2 can also be the Capture1 input/Compare1 output/ PWM1 output. RC3/SCK/SCL 14 11 I/O ST RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes. RC4/SDI/SDA 15 12 I/O ST RC4 can also be the SPI Data In (SPI mode) or Data I/O (I2C mode). RC5/SDO 16 13 I/O ST RC5 can also be the SPI Data Out (SPI mode). RC6 17 14 I/O ST RC7 18 15 I/O ST VSS 8, 19 5, 16 P -- Ground reference for logic and I/O pins. VDD 20 17 P -- Positive supply for logic and I/O pins. Legend: I = input O = output I/O = input/output P = power -- = Not used TTL = TTL input ST = Schmitt Trigger input Note 1: This buffer is a Schmitt Trigger input when configured as the external interrupt. 2: This buffer is a Schmitt Trigger input when used in Serial Programming mode. 3: This buffer is a Schmitt Trigger input when configured in RC Oscillator mode and a CMOS input otherwise. DS39597B-page 6 2002 Microchip Technology Inc. PIC16F72 2.0 MEMORY ORGANIZATION There are two memory blocks in the PIC16F72 device. These are the program memory and the data memory. Each block has separate buses so that concurrent access can occur. Program memory and data memory are explained in this section. Program memory can be read internally by the user code (see Section 4.0). The data memory can further be broken down into the general purpose RAM and the Special Function Registers (SFRs). The operation of the SFRs that control the "core" are described here. The SFRs used to control the peripheral modules are described in the section discussing each individual peripheral module. Additional information on device memory may be found in the PICmicroTM Mid-Range Reference Manual, (DS33023). 2.1 Program Memory Organization PIC16F72 devices have a 13-bit program counter capable of addressing a 8K x 14 program memory space. The address range for this program memory is 0000h 07FFh. Accessing a location above the physically implemented address will cause a wraparound. The RESET Vector is at 0000h and the Interrupt Vector is at 0004h. FIGURE 2-1: PROGRAM MEMORY MAP AND STACK 2.2 Data Memory Organization The Data Memory is partitioned into multiple banks that contain the General Purpose Registers and the Special Function Registers. Bits RP1 (STATUS<6>) and RP0 (STATUS<5>) are the bank select bits. RP1:RP0 Bank 00 0 01 1 10 2 11 3 Each bank extends up to 7Fh (128 bytes). The lower locations of each bank are reserved for the Special Function Registers. Above the Special Function Registers are General Purpose Registers, implemented as static RAM. All implemented banks contain SFRs. Some "high use" SFRs from one bank may be mirrored in another bank, for code reduction and quicker access (e.g., the STATUS register is in Banks 0 - 3). 2.2.1 GENERAL PURPOSE REGISTER FILE The register file can be accessed either directly, or indirectly, through the File Select Register FSR (see Section 2.5). PC<12:0> CALL, RETURN RETFIE, RETLW 13 Stack Level 1 User Memory Space Stack Level 8 RESET Vector 0000h Interrupt Vector 0004h 0005h On-chip Program Memory 07FFh 0800h 1FFFh 2002 Microchip Technology Inc. DS39597B-page 7 PIC16F72 FIGURE 2-2: PIC16F72 REGISTER FILE MAP File Address Indirect addr.(*) TMR0 PCL STATUS FSR PORTA PORTB PORTC PCLATH INTCON PIR1 TMR1L TMR1H T1CON TMR2 T2CON SSPBUF SSPCON CCPR1L CCPR1H CCP1CON ADRES ADCON0 00h 01h 02h 03h 04h 05h 06h 07h 08h 09h 0Ah 0Bh 0Ch 0Dh 0Eh 0Fh 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 1Ah 1Bh 1Ch 1Dh 1Eh 1Fh 20h General Purpose Register File Address Indirect addr.(*) 80h OPTION 81h PCL 82h STATUS 83h FSR 84h TRISA 85h TRISB 86h TRISC 87h 88h 89h PCLATH 8Ah INTCON 8Bh PIE1 8Ch 8Dh PCON 8Eh 8Fh 90h 91h PR2 92h SSPADD 93h SSPSTAT 94h 95h 96h 97h 98h 99h 9Ah 9Bh 9Ch 9Dh 9Eh 9Fh ADCON1 General A0h Purpose Register BFh 32 Bytes C0h 7Fh Bank 0 Indirect addr.(*) 100h 101h TMR0 102h PCL 103h STATUS 104h FSR 105h 106h PORTB 107h 108h 109h 10Ah PCLATH 10Bh INTCON 10Ch PMDATL PMADRL 10Dh 10Eh PMDATH 10Fh PMADRH 110h accesses 40h-7Fh 96 Bytes File Address File Address TRISB PCLATH INTCON PMCON1 11Fh 120h accesses A0h -BFh 180h 181h 182h 183h 184h 185h 186h 187h 188h 189h 18Ah 18Bh 18Ch 18Dh 18Eh 18Fh 190h 19Fh 1A0h 1BFh 1C0h accesses 20h-7Fh accesses 40h -7Fh 17Fh FFh Bank 1 Indirect addr.(*) OPTION PCL STATUS FSR Bank 2 1FFh Bank 3 Unimplemented data memory locations, read as `0'. * Not a physical register. DS39597B-page 8 2002 Microchip Technology Inc. PIC16F72 2.2.2 SPECIAL FUNCTION REGISTERS The Special Function Registers can be classified into two sets: core (CPU) and peripheral. Those registers associated with the core functions are described in detail in this section. Those related to the operation of the peripheral features are described in detail in the peripheral feature section. The Special Function Registers are registers used by the CPU and peripheral modules for controlling the desired operation of the device. These registers are implemented as static RAM. A list of these registers is given in Table 2-1. TABLE 2-1: Address Name SPECIAL FUNCTION REGISTER SUMMARY Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on Details on POR, BOR page: Bank 0 00h(1) INDF Addressing this location uses contents of FSR to address data memory (not a physical register) 0000 0000 01h TMR0 Timer0 Module's Register 02h(1) PCL Program Counter's (PC) Least Significant Byte 03h(1) STATUS 04h(1) FSR 05h PORTA 06h PORTB 07h PORTC 19 xxxx xxxx 29,13 0000 0000 18 0001 1xxx 12 xxxx xxxx 19 --0x 0000 21 PORTB Data Latch when written: PORTB pins when read xxxx xxxx 23 PORTC Data Latch when written: PORTC pins when read xxxx xxxx 25 -- IRP RP1 RP0 TO PD Z DC C Indirect Data Memory Address Pointer -- -- PORTA Data Latch when written: PORTA pins when read 08h -- Unimplemented -- 09h -- Unimplemented -- -- ---0 0000 18 0Ah(1,2) PCLATH 0Bh(1) INTCON 0Ch PIR1 -- -- -- Write Buffer for the upper 5 bits of the Program Counter GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 14 -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF -0-- 0000 16 0Dh -- 0Eh TMR1L Unimplemented Holding Register for the Least Significant Byte of the 16-bit TMR1 Register 0Fh TMR1H Holding Register for the Most Significant Byte of the 16-bit TMR1 Register 10h T1CON -- -- T1CKPS1 T1CKPS0 T1OSCEN T1SYNC 11h TMR2 12h T2CON 13h SSPBUF 14h SSPCON 15h CCPR1L Capture/Compare/PWM Register (LSB) 16h CCPR1H Capture/Compare/PWM Register (MSB) 17h CCP1CON 18h-1Dh -- -- 0000 0000 35 36 -- SSPOV -- 1Fh ADCON0 ADCS1 3: SSPEN CCP1X CKP CCP1Y SSPM3 CCP1M3 xxxx xxxx SSPM2 CCP1M2 SSPM1 CCP1M1 SSPM0 CCP1M0 Unimplemented A/D Result Register 1: 2: 31 31 TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 -000 0000 ADRES Note xxxx xxxx Synchronous Serial Port Receive Buffer/Transmit Register WCOL -- 31 TMR1ON --00 0000 Timer2 Module's Register 1Eh Legend: TMR1CS -- xxxx xxxx ADCS0 CHS2 CHS1 CHS0 GO/DONE -- ADON 43,48 0000 0000 45 xxxx xxxx 38,39,41 xxxx xxxx 38,39,41 --00 0000 37 -- -- xxxx xxxx 53 0000 00-0 53 x = unknown, u = unchanged, q = value depends on condition, - = unimplemented, read as `0', r = reserved. Shaded locations are unimplemented, read as `0'. These registers can be addressed from any bank. The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8> whose contents are transferred to the upper byte of the program counter. This bit always reads as a `1'. 2002 Microchip Technology Inc. DS39597B-page 9 PIC16F72 TABLE 2-1: Address Name SPECIAL FUNCTION REGISTER SUMMARY (CONTINUED) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on Details on POR, BOR page: Bank 1 80h(1) INDF 81h OPTION 82h(1) PCL 83h(1) STATUS 84h(1) FSR Addressing this location uses contents of FSR to address data memory (not a physical register) 0000 0000 RBPU INTEDG T0CS T0SE PS2 PS1 PS0 1111 1111 0000 0000 18 PD Z DC C 0001 1xxx 12 xxxx xxxx 19 Program Counter's (PC) Least Significant Byte IRP RP1 RP0 TO Indirect Data Memory Address Pointer -- -- 19 PSA PORTA Data Direction Register 13 85h TRISA --11 1111 21 86h TRISB PORTB Data Direction Register 1111 1111 23 PORTC Data Direction Register 87h TRISC 1111 1111 25 88h -- Unimplemented -- -- 89h -- Unimplemented -- -- (1,2) 8Ah PCLATH -- -- -- ---0 0000 18 8Bh(1) INTCON GIE PEIE TMR0IE Write Buffer for the upper 5 bits of the PC INTE RBIE TMR0IF INTF RBIF 0000 000x 14 8Ch PIE1 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE -0-- 0000 15 -- -- -- -- -- -- POR BOR ---- --qq 17 8Dh -- 8Eh PCON Unimplemented 8Fh -- Unimplemented -- -- 90h -- Unimplemented -- -- 91h -- Unimplemented -- -- -- -- 92h PR2 Timer2 Period Register 1111 1111 41 93h SSPADD Synchronous Serial Port (I2C mode) Address Register 0000 0000 43,48 94h SSPSTAT 0000 0000 44 SMP CKE D/A P S R/W UA BF 95h -- Unimplemented -- -- 96h -- Unimplemented -- -- 97h -- Unimplemented -- -- 98h -- Unimplemented -- -- 99h -- Unimplemented -- -- 9Ah -- Unimplemented -- -- 9Bh -- Unimplemented -- -- 9Ch -- Unimplemented -- -- 9Dh -- Unimplemented -- -- 9Eh -- Unimplemented -- -- ---- -000 54 9Fh ADCON1 Legend: Note 1: 2: 3: -- -- -- -- -- PCFG2 PCFG1 PCFG0 x = unknown, u = unchanged, q = value depends on condition, - = unimplemented, read as `0', r = reserved. Shaded locations are unimplemented, read as `0'. These registers can be addressed from any bank. The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8> whose contents are transferred to the upper byte of the program counter. This bit always reads as a `1'. DS39597B-page 10 2002 Microchip Technology Inc. PIC16F72 TABLE 2-1: Address Name SPECIAL FUNCTION REGISTER SUMMARY (CONTINUED) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on Details on POR, BOR page: Bank 2 100h(1) INDF Addressing this location uses contents of FSR to address data memory (not a physical register) 0000 0000 19 101h TMR0 Timer0 Module's Register xxxx xxxx 29 102h(1 PCL Program Counter's (PC) Least Significant Byte 0000 0000 18 0001 1xxx 12 xxxx xxxx 19 (1) 103h STATUS 104h(1) FSR 105h -- 106h IRP RP1 RP0 TO PD Z DC C Indirect Data Memory Address Pointer PORTB Unimplemented PORTB Data Latch when written: PORTB pins when read -- -- xxxx xxxx 23 107h -- Unimplemented -- -- 108h -- Unimplemented -- -- 109h -- Unimplemented -- -- ---0 0000 18 10Ah(1,2) PCLATH -- -- -- GIE PEIE TMR0IE Write Buffer for the upper 5 bits of the Program Counter 10Bh(1) INTCON 0000 000x 14 10Ch PMDATL Data Register Low Byte xxxx xxxx 27 10Dh PMADRL Address Register Low Byte xxxx xxxx 27 10Eh PMDATH -- -- 10Fh PMADRH -- -- INTE RBIE TMR0IF INTF RBIF Data Register High Byte -- Address Register High Byte --xx xxxx 27 ---x xxxx 27 Bank 3 180h(1) INDF 181h OPTION 182h(1) PCL 183h(1) STATUS 184h(1) FSR INTEDG T0CS T0SE IRP RP1 RP0 TO 186h TRISB 187h -- 188h -- 189h -- PCLATH 19 PSA PS2 PS1 PS0 1111 1111 0000 0000 18 PD Z DC C 0001 1xxx 12 xxxx xxxx 19 Indirect Data Memory Address Pointer -- 18Ah RBPU Program Counter's (PC) Least Significant Byte 185h (1,2) Addressing this location uses contents of FSR to address data memory (not a physical register) 0000 0000 Unimplemented 13 -- -- 1111 1111 23 Unimplemented -- -- Unimplemented -- -- Unimplemented -- -- ---0 0000 18 PORTB Data Direction Register -- -- -- Write Buffer for the upper 5 bits of the Program Counter 18Bh(1) INTCON GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 14 18Ch PMCON1 -- (3) -- -- -- -- -- -- RD 1--- ---0 27 18Dh -- Unimplemented -- -- 18Eh -- Reserved, maintain clear 0000 0000 -- 18Fh -- Reserved, maintain clear 0000 0000 -- Legend: Note 1: 2: 3: x = unknown, u = unchanged, q = value depends on condition, - = unimplemented, read as `0', r = reserved. Shaded locations are unimplemented, read as `0'. These registers can be addressed from any bank. The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8> whose contents are transferred to the upper byte of the program counter. This bit always reads as a `1'. 2002 Microchip Technology Inc. DS39597B-page 11 PIC16F72 2.2.2.1 STATUS Register The STATUS register, shown in Register 2-1, contains the arithmetic status of the ALU, the RESET status and the bank select bits for data memory. The STATUS register can be the destination for any instruction, as with any other register. If the STATUS register is the destination for an instruction that affects the Z, DC or C bits, then the write to these three bits is disabled. These bits are set or cleared according to the device logic. Furthermore, the TO and PD bits are not writable. Therefore, the result of an instruction with the STATUS register as destination may be different than intended. REGISTER 2-1: For example, CLRF STATUS will clear the upper three bits and set the Z bit. This leaves the STATUS register as `000u u1uu' (where u = unchanged). It is recommended, therefore, that only BCF, BSF, SWAPF and MOVWF instructions are used to alter the STATUS register, because these instructions do not affect the Z, C or DC bits from the STATUS register. For other instructions, not affecting any status bits, see Section 12.0, Instruction Set Summary. Note 1: The C and DC bits operate as a borrow and digit borrow bit, respectively, in subtraction. See the SUBLW and SUBWF instructions for examples. STATUS REGISTER (ADDRESS 03h, 83h, 103h, 183h) R/W-0 R/W-0 R/W-0 R-1 R-1 R/W-x R/W-x R/W-x IRP RP1 RP0 TO PD Z DC C bit 7 bit 0 bit 7 IRP: Register Bank Select bit (used for indirect addressing) 1 = Bank 2, 3 (100h - 1FFh) 0 = Bank 0, 1 (00h - FFh) bit 6-5 RP<1:0>: Register Bank Select bits (used for direct addressing) 11 = Bank 3 (180h - 1FFh) 10 = Bank 2 (100h - 17Fh) 01 = Bank 1 (80h - FFh) 00 = Bank 0 (00h - 7Fh) Each bank is 128 bytes bit 4 TO: Time-out bit 1 = After power-up, CLRWDT instruction, or SLEEP instruction 0 = A WDT time-out occurred bit 3 PD: Power-down bit 1 = After power-up or by the CLRWDT instruction 0 = By execution of the SLEEP instruction bit 2 Z: Zero bit 1 = The result of an arithmetic or logic operation is zero 0 = The result of an arithmetic or logic operation is not zero bit 1 DC: Digit carry/borrow bit (ADDWF, ADDLW, SUBLW and SUBWF instructions)(1) 1 = A carry-out from the 4th low order bit of the result occurred 0 = No carry-out from the 4th low order bit of the result bit 0 C: Carry/borrow bit (ADDWF, ADDLW, SUBLW and SUBWF instructions)(1,2) 1 = A carry-out from the Most Significant bit of the result occurred 0 = No carry-out from the Most Significant bit of the result occurred Note 1: For borrow, the polarity is reversed. A subtraction is executed by adding the two's complement of the second operand. 2: For rotate (RRF, RLF) instructions, this bit is loaded with either the high or low order bit of the source register. Legend: DS39597B-page 12 R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared x = Bit is unknown 2002 Microchip Technology Inc. PIC16F72 2.2.2.2 OPTION Register Note: The OPTION register is a readable and writable register that contains various control bits to configure the TMR0 prescaler/WDT postscaler (single assignable register known also as the prescaler), the External INT Interrupt, TMR0, and the weak pull-ups on PORTB. REGISTER 2-2: To achieve a 1:1 prescaler assignment for the TMR0 register, assign the prescaler to the Watchdog Timer. OPTION REGISTER (ADDRESS 81h, 181h) R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 bit 7 bit 0 bit 7 RBPU: PORTB Pull-up Enable bit 1 = PORTB pull-ups are disabled 0 = PORTB pull-ups are enabled by individual port latch values bit 6 INTEDG: Interrupt Edge Select bit 1 = Interrupt on rising edge of RB0/INT pin 0 = Interrupt on falling edge of RB0/INT pin bit 5 T0CS: TMR0 Clock Source Select bit 1 = Transition on RA4/T0CKI pin 0 = Internal instruction cycle clock (CLKO) bit 4 T0SE: TMR0 Source Edge Select bit 1 = Increment on high-to-low transition on RA4/T0CKI pin 0 = Increment on low-to-high transition on RA4/T0CKI pin bit 3 PSA: Prescaler Assignment bit 1 = Prescaler is assigned to the WDT 0 = Prescaler is assigned to the Timer0 module bit 2-0 PS2:PS0: Prescaler Rate Select bits Bit Value TMR0 Rate WDT Rate 000 001 010 011 100 101 110 111 1:2 1:4 1:8 1 : 16 1 : 32 1 : 64 1 : 128 1 : 256 1:1 1:2 1:4 1:8 1 : 16 1 : 32 1 : 64 1 : 128 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared 2002 Microchip Technology Inc. x = Bit is unknown DS39597B-page 13 PIC16F72 2.2.2.3 INTCON Register Note: The INTCON Register is a readable and writable register that contains various enable and flag bits for the TMR0 register overflow, RB Port change and External RB0/INT pin interrupts. REGISTER 2-3: Interrupt flag bits get set when an interrupt condition occurs, regardless of the state of its corresponding enable bit or the global enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to enabling an interrupt. INTCON: INTERRUPT CONTROL REGISTER (ADDRESS 0Bh, 8Bh, 10Bh, 18Bh) R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-x GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF bit 7 bit 0 bit 7 GIE: Global Interrupt Enable bit 1 = Enables all unmasked interrupts 0 = Disables all interrupts bit 6 PEIE: Peripheral Interrupt Enable bit 1 = Enables all unmasked peripheral interrupts 0 = Disables all peripheral interrupts bit 5 TMR0IE: TMR0 Overflow Interrupt Enable bit 1 = Enables the TMR0 interrupt 0 = Disables the TMR0 interrupt bit 4 INTE: RB0/INT External Interrupt Enable bit 1 = Enables the RB0/INT external interrupt 0 = Disables the RB0/INT external interrupt bit 3 RBIE: RB Port Change Interrupt Enable bit 1 = Enables the RB port change interrupt 0 = Disables the RB port change interrupt bit 2 TMR0IF: TMR0 Overflow Interrupt Flag bit 1 = TMR0 register has overflowed (must be cleared in software) 0 = TMR0 register did not overflow bit 1 INTF: RB0/INT External Interrupt Flag bit 1 = The RB0/INT external interrupt occurred (must be cleared in software) 0 = The RB0/INT external interrupt did not occur bit 0 RBIF: RB Port Change Interrupt Flag bit A mismatch condition will continue to set flag bit RBIF. Reading PORTB will end the mismatch condition and allow flag bit RBIF to be cleared. 1 = At least one of the RB7:RB4 pins changed state (must be cleared in software) 0 = None of the RB7:RB4 pins have changed state Legend: DS39597B-page 14 R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared x = Bit is unknown 2002 Microchip Technology Inc. PIC16F72 2.2.2.4 PIE1 Register This register contains the individual enable bits for the peripheral interrupts. Note: Bit PEIE (INTCON<6>) must be set to enable any peripheral interrupt. REGISTER 2-4: PIE1: PERIPHERAL INTERRUPT ENABLE REGISTER 1 (ADDRESS 8Ch) U-0 R/W-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE bit 7 bit 0 bit 7 Unimplemented: Read as `0' bit 6 ADIE: A/D Converter Interrupt Enable bit 1 = Enables the A/D converter interrupt 0 = Disables the A/D converter interrupt bit 5-4 Unimplemented: Read as `0' bit 3 SSPIE: Synchronous Serial Port Interrupt Enable bit 1 = Enables the SSP interrupt 0 = Disables the SSP interrupt bit 2 CCP1IE: CCP1 Interrupt Enable bit 1 = Enables the CCP1 interrupt 0 = Disables the CCP1 interrupt bit 1 TMR2IE: TMR2 to PR2 Match Interrupt Enable bit 1 = Enables the TMR2 to PR2 match interrupt 0 = Disables the TMR2 to PR2 match interrupt bit 0 TMR1IE: TMR1 Overflow Interrupt Enable bit 1 = Enables the TMR1 overflow interrupt 0 = Disables the TMR1 overflow interrupt Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared 2002 Microchip Technology Inc. x = Bit is unknown DS39597B-page 15 PIC16F72 2.2.2.5 PIR1 Register This register contains the individual flag bits for the Peripheral interrupts. REGISTER 2-5: PIR1: PERIPHERAL INTERRUPT FLAG REGISTER 1 (ADDRESS 0Ch) U-0 R/W-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF bit 7 bit 0 bit 7 Unimplemented: Read as `0' bit 6 ADIF: A/D Converter Interrupt Flag bit 1 = An A/D conversion completed 0 = The A/D conversion is not complete bit 5-4 Unimplemented: Read as `0' bit 3 SSPIF: Synchronous Serial Port (SSP) Interrupt Flag bit 1 = The SSP interrupt condition has occurred, and must be cleared in software before returning from the Interrupt Service Routine. The conditions that will set this bit are a transmission/reception has taken place. 0 = No SSP interrupt condition has occurred bit 2 CCP1IF: CCP1 Interrupt Flag bit Capture mode: 1 = A TMR1 register capture occurred (must be cleared in software) 0 = No TMR1 register capture occurred Compare mode: 1 = A TMR1 register compare match occurred (must be cleared in software) 0 = No TMR1 register compare match occurred PWM mode: Unused in this mode bit 1 TMR2IF: TMR2 to PR2 Match Interrupt Flag bit 1 = TMR2 to PR2 match occurred (must be cleared in software) 0 = No TMR2 to PR2 match occurred bit 0 TMR1IF: TMR1 Overflow Interrupt Flag bit 1 = TMR1 register overflowed (must be cleared in software) 0 = TMR1 register did not overflow Legend: DS39597B-page 16 R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared x = Bit is unknown 2002 Microchip Technology Inc. PIC16F72 2.2.2.6 Note: PCON Register Note: Interrupt flag bits get set when an interrupt condition occurs, regardless of the state of its corresponding enable bit or the global enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to enabling an interrupt. BOR is unknown on Power-on Reset. It must then be set by the user and checked on subsequent RESETS to see if BOR is clear, indicating a brown-out has occurred. The BOR status bit is a `don't care' and is not necessarily predictable if the brown-out circuit is disabled (by clearing the BOREN bit in the Configuration word). The Power Control (PCON) register contains a flag bit to allow differentiation between a Power-on Reset (POR), a Brown-out Reset, an external MCLR Reset and WDT Reset. REGISTER 2-6: PCON: POWER CONTROL REGISTER (ADDRESS 8Eh) U-0 U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-x -- -- -- -- -- -- POR BOR bit 7 bit 0 bit 7-2 Unimplemented: Read as `0' bit 1 POR: Power-on Reset Status bit 1 = No Power-on Reset occurred 0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs) bit 0 BOR: Brown-out Reset Status bit 1 = No Brown-out Reset occurred 0 = A Brown-out Reset occurred (must be set in software after a Brown-out Reset occurs) Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared 2002 Microchip Technology Inc. x = Bit is unknown DS39597B-page 17 PIC16F72 2.3 PCL and PCLATH Figure 2-3 shows the four situations for the loading of the PC. The program counter (PC) specifies the address of the instruction to fetch for execution. The PC is 13-bits wide. The low byte is called the PCL register. This register is readable and writable. The high byte is called the PCH register. This register contains the PC<12:8> bits and is not directly readable or writable. All updates to the PCH register go through the PCLATH register. FIGURE 2-3: * Example 1 shows how the PC is loaded on a write to PCL (PCLATH<4:0> PCH). * Example 2 shows how the PC is loaded during a GOTO instruction (PCLATH<4:3> PCH). * Example 3 shows how the PC is loaded during a CALL instruction (PCLATH<4:3> PCH), with the PC loaded (PUSH'd) onto the Top-of-Stack. * Example 4 shows how the PC is loaded during one of the return instructions, where the PC is loaded (POP'd) from the Top-of-Stack. LOADING OF PC IN DIFFERENT SITUATIONS Example 1 - Instruction with PCL as destination PCH Top-of-Stack PCL 12 8 Stack (13-bits x 8) 7 0 PC 5 8 PCLATH<4:0> ALU result PCLATH Stack (13-bits x 8) Example 2 - GOTO Instruction PCH 12 11 10 Top-of-Stack PCL 8 7 0 PC 2 11 PCLATH<4:3> Opcode <10:0> PCLATH Example 3 - CALL Instruction Stack (13-bits x 8) 13 Top-of-Stack PCH 12 11 10 PCL 8 0 7 PC 2 PCLATH<4:3> 11 Opcode <10:0> PCLATH Example 4 - RETURN, RETFIE, or RETLW Instruction 13 Stack (13-bits x 8) Top-of-Stack PCH 12 11 10 PCL 8 7 0 PC 11 Opcode <10:0> PCLATH Note: PCLATH is not updated with the contents of PCH. DS39597B-page 18 2002 Microchip Technology Inc. PIC16F72 2.3.1 COMPUTED GOTO 2.4 A computed GOTO is accomplished by adding an offset to the program counter (ADDWF PCL). When doing a table read using a computed GOTO method, care should be exercised if the table location crosses a PCL memory boundary (each 256-byte block). Refer to the Application Note, "Implementing a Table Read" (AN556). 2.3.2 STACK The stack allows a combination of up to eight program calls and interrupts to occur. The stack contains the return address from this branch in program execution. Mid-range devices have an 8-level deep x 13-bit wide hardware stack. The stack space is not part of either program or data space and the stack pointer is not readable or writable. The PC is PUSH'd onto the stack when a CALL instruction is executed, or an interrupt causes a branch. The stack is POP'd in the event of a RETURN, RETLW or a RETFIE instruction execution. PCLATH is not modified when the stack is PUSH'd or POP'd. After the stack has been PUSH'd eight times, the ninth push overwrites the value that was stored from the first push. The tenth push overwrites the second push (and so on). An example of the overwriting of the stack is shown in Figure 2-4. FIGURE 2-4: STACK MODIFICATION The CALL and GOTO instructions provide 11 bits of address to allow branching within any 2K program memory page. When doing a CALL or GOTO instruction, the upper two bits of the address are provided by PCLATH<4:3>. When doing a CALL or GOTO instruction, the user must ensure that the page select bits are programmed so that the desired program memory page is addressed. If a return from a CALL instruction (or interrupt) is executed, the entire 13-bit PC is pushed onto the stack. Therefore, manipulation of the PCLATH<4:3> bits is not required for the return instructions (which POPs the address from the stack). Note: 2.5 The PIC16F72 device ignores the paging bit PCLATH<4:3>. The use of PCLATH<4:3> as a general purpose read/ write bit is not recommended, since this may affect upward compatibility with future products. Indirect Addressing, INDF and FSR Registers The INDF register is not a physical register. Addressing INDF actually addresses the register whose address is contained in the FSR register (FSR is a pointer). This is indirect addressing. A simple program to clear RAM locations 20h-2Fh using indirect addressing is shown in Example 2-1. EXAMPLE 2-1: Stack Push1 Push9 Push2 Push10 Push3 Push4 Push5 Push6 Push7 Push8 Program Memory Paging Top-of-Stack NEXT movlw movwf clrf incf btfss goto INDIRECT ADDRESSING 0x20 FSR INDF FSR FSR,4 NEXT ;initialize pointer ;to RAM ;clear INDF register ;inc pointer ;all done? ;NO, clear next CONTINUE : ;YES, continue An effective 9-bit address is obtained by concatenating the 8-bit FSR register and the IRP bit (STATUS<7>), as shown in Figure 2-5. Note 1: There are no status bits to indicate stack overflow or stack underflow conditions. 2: There are no instructions/mnemonics called PUSH or POP. These are actions that occur from the execution of the CALL, RETURN, RETLW and RETFIE instructions, or the vectoring to an interrupt address. 2002 Microchip Technology Inc. DS39597B-page 19 PIC16F72 FIGURE 2-5: DIRECT/INDIRECT ADDRESSING Direct Addressing RP1:RP0 6 Indirect Addressing From Opcode 0 IRP 7 Bank Select Bank Select Location Select 00 01 10 FSR Register 0 Location Select 11 00h 80h 100h 180h 7Fh FFh 17Fh 1FFh Data Memory(1) Bank 0 Bank 1 Bank 2 Bank 3 Note 1: For register file map detail, see Figure 2-2. DS39597B-page 20 2002 Microchip Technology Inc. PIC16F72 3.0 I/O PORTS FIGURE 3-1: Some pins for these I/O ports are multiplexed with an alternate function for the peripheral features on the device. In general, when a peripheral is enabled, that pin may not be used as a general purpose I/O pin. Additional information on I/O ports may be found in the PICmicroTM Mid-Range MCU Reference Manual, (DS33023). 3.1 Data Bus D Q VDD WR Port VDD Q CK P Data Latch PORTA and the TRISA Register PORTA is a 6-bit wide, bi-directional port. The corresponding data direction register is TRISA. Setting a TRISA bit (= 1) will make the corresponding PORTA pin an input (i.e., put the corresponding output driver in a Hi-Impedance mode). Clearing a TRISA bit (= 0) will make the corresponding PORTA pin an output (i.e., put the contents of the output latch on the selected pin). BLOCK DIAGRAM OF RA3:RA0 AND RA5 PINS D WR TRIS CK Q N Q VSS Other PORTA pins are multiplexed with analog inputs and analog VREF input. The operation of each pin is selected by clearing/setting the control bits in the ADCON1 register (A/D Control Register1). Note: On a Power-on Reset, these pins are configured as analog inputs and read as `0'. The TRISA register controls the direction of the RA pins, even when they are being used as analog inputs. The user must ensure the bits in the TRISA register are maintained set when using them as analog inputs. EXAMPLE 3-1: BANKSEL CLRF BANKSEL MOVLW MOVWF MOVLW MOVWF PORTA PORTA INITIALIZING PORTA ; ; ; ; ADCON1 ; 0x06 ; ADCON1 ; 0xCF ; ; ; TRISA ; ; ; ; select bank for PORTA Initialize PORTA by clearing output data latches Select Bank for ADCON1 Configure all pins as digital inputs Value used to initialize data direction Set RA<3:0> as inputs RA<5:4> as outputs TRISA<7:6> are always read as `0'. 2002 Microchip Technology Inc. VSS Analog Input Mode TRIS Latch RD TRIS Reading the PORTA register, reads the status of the pins, whereas writing to it will write to the port latch. All write operations are read-modify-write operations. Therefore, a write to a port implies that the port pins are read, this value is modified and then written to the port data latch. Pin RA4 is multiplexed with the Timer0 module clock input to become the RA4/T0CKI pin. The RA4/T0CKI pin is a Schmitt Trigger input and an open drain output. All other RA port pins have TTL input levels and full CMOS output drivers. I/O pin TTL Input Buffer Q D EN RD Port To A/D Converter FIGURE 3-2: Data Bus WR Port BLOCK DIAGRAM OF RA4/T0CKI PIN D Q CK Q D WR TRIS I/O pin N Data Latch VSS Q VSS CK Q Schmitt Trigger Input Buffer TRIS Latch RD TRIS Q D ENEN RD Port TMR0 Clock Input DS39597B-page 21 PIC16F72 TABLE 3-1: PORTA FUNCTIONS Name Bit# Buffer Function RA0/AN0 bit 0 TTL Input/output or analog input. RA1/AN1 bit 1 TTL Input/output or analog input. RA2/AN2 bit 2 TTL Input/output or analog input. RA3/AN3/VREF bit 3 TTL Input/output or analog input or VREF. RA4/T0CKI bit 4 ST Input/output or external clock input for Timer0. Output is open drain type. RA5/AN4/SS bit 5 TTL Input/output or analog input or slave select input for synchronous serial port. Legend: TTL = TTL input, ST = Schmitt Trigger input TABLE 3-2: Address SUMMARY OF REGISTERS ASSOCIATED WITH PORTA Name Bit 7 Bit 6 05h PORTA -- -- 85h TRISA -- -- 9Fh ADCON1 -- -- Value on all other RESETS Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR RA5 RA4 RA3 RA2 RA1 RA0 --0x 0000 --0u 0000 PORTA Data Direction Register -- -- -- --11 1111 --11 1111 PCFG2 PCFG1 PCFG0 ---- -000 ---- -000 Legend: x = unknown, u = unchanged, - = unimplemented locations read as `0'. Shaded cells are not used by PORTA. Note: When using the SSP module in SPI Slave mode and SS enabled, the A/D Port Configuration Control bits (PCFG2:PCFG0) in the A/D Control Register (ADCON1) must be set to one of the following configurations: 100, 101, 11x. DS39597B-page 22 2002 Microchip Technology Inc. PIC16F72 3.2 PORTB and the TRISB Register PORTB is an 8-bit wide, bi-directional port. The corresponding data direction register is TRISB. Setting a TRISB bit (= 1) will make the corresponding PORTB pin an input (i.e., put the corresponding output driver in a Hi-Impedance mode). Clearing a TRISB bit (= 0) will make the corresponding PORTB pin an output (i.e., put the contents of the output latch on the selected pin). EXAMPLE 3-2: BANKSEL CLRF PORTB PORTB BANKSEL MOVLW TRISB 0xCF MOVWF TRISB INITIALIZING PORTB ; ; ; ; ; ; ; ; ; ; ; Select bank for PORTB Initialize PORTB by clearing output data latches Select Bank for TRISB Value used to initialize data direction Set RB<3:0> as inputs RB<5:4> as outputs RB<7:6> as inputs are compared with the old value latched on the last read of PORTB. The "mismatch" outputs of RB7:RB4 are OR'd together to generate the RB Port Change Interrupt with flag bit RBIF (INTCON<0>). This interrupt can wake the device from SLEEP. The user, in the Interrupt Service Routine, can clear the interrupt in the following manner: a) b) Any read or write of PORTB. This will end the mismatch condition. Clear flag bit RBIF. A mismatch condition will continue to set flag bit RBIF. Reading PORTB will end the mismatch condition and allow flag bit RBIF to be cleared. The interrupt-on-change feature is recommended for wake-up on key depression operation and operations where PORTB is only used for the interrupt-on-change feature. Polling of PORTB is not recommended while using the interrupt-on-change feature. This interrupt-on-mismatch feature, together with software configurable pull-ups on these four pins, allow easy interface to a keypad and make it possible for wake-up on key depression. Refer to the Embedded Control Handbook, "Implementing Wake-Up on Key Stroke" (AN552). Each of the PORTB pins has a weak internal pull-up. A single control bit can turn on all the pull-ups. This is performed by clearing bit RBPU (OPTION<7>). The weak pull-up is automatically turned off when the port pin is configured as an output. The pull-ups are disabled on a Power-on Reset. RB0/INT is an external interrupt input pin and is configured using the INTEDG bit (OPTION<6>). FIGURE 3-3: FIGURE 3-4: BLOCK DIAGRAM OF RB3:RB0 PINS BLOCK DIAGRAM OF RB7:RB4 PINS VDD RBPU(1) Data Bus Data Latch D WR Port VDD RBPU(1) VDD P Weak Pull-up Data Bus Q I/O pin CK TRIS Latch D Q WR TRIS WR Port CK WR TRIS RD TRIS D Q I/O pin CK VSS TTL Input Buffer CK RD TRIS Q RD Port Data Latch TRIS Latch D Q VSS TTL Input Buffer VDD P Weak Pull-up D Q EN Set RBIF Latch D EN RD Port ST Buffer Q1 RB0/INT Schmitt Trigger Buffer RD Port Note 1: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit (OPTION<7>). Q From Other RB7:RB4 Pins D RD Port EN Q3 RB7:RB6 in Serial Programming Mode Four of PORTB's pins, RB7:RB4, have an interrupt-onchange feature. Only pins configured as inputs can cause this interrupt to occur (i.e., any RB7:RB4 pin configured as an output is excluded from the interrupt on change comparison). The input pins (of RB7:RB4) 2002 Microchip Technology Inc. Note 1: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit (OPTION<7>). DS39597B-page 23 PIC16F72 TABLE 3-3: PORTB FUNCTIONS Name Bit# Buffer Function RB0/INT bit 0 TTL/ST(1) RB1 bit 1 TTL Input/output pin. Internal software programmable weak pull-up. RB2 bit 2 TTL Input/output pin. Internal software programmable weak pull-up. RB3 bit 3 TTL Input/output pin. Internal software programmable weak pull-up. RB4 bit 4 TTL Input/output pin (with interrupt-on-change). Internal software programmable weak pull-up. RB5 bit 5 TTL Input/output pin (with interrupt-on-change). Internal software programmable weak pull-up. RB6 bit 6 TTL/ST(2) Input/output pin (with interrupt-on-change). Internal software programmable weak pull-up. Serial programming clock. RB7 bit 7 TTL/ST(2) Input/output pin (with interrupt-on-change). Internal software programmable weak pull-up. Serial programming data. Input/output pin or external interrupt input. Internal software programmable weak pull-up. Legend: TTL = TTL input, ST = Schmitt Trigger input Note 1: This buffer is a Schmitt Trigger input when configured as the external interrupt. 2: This buffer is a Schmitt Trigger input when used in Serial Programming mode. TABLE 3-4: SUMMARY OF REGISTERS ASSOCIATED WITH PORTB Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR Value on all other RESETS 06h, 106h PORTB RB7 RB6 RB5 RB4 RB3 RB2 RB1 RB0 xxxx xxxx uuuu uuuu 1111 1111 1111 1111 PSA PS2 PS1 PS0 1111 1111 1111 1111 86h, 186h TRISB PORTB Data Direction Register 81h, 181h OPTION RBPU INTEDG T0CS T0SE Legend: x = unknown, u = unchanged. Shaded cells are not used by PORTB. DS39597B-page 24 2002 Microchip Technology Inc. PIC16F72 3.3 PORTC and the TRISC Register PORTC is an 8-bit wide, bi-directional port. The corresponding data direction register is TRISC. Setting a TRISC bit (= 1) will make the corresponding PORTC pin an input (i.e., put the corresponding output driver in a Hi-Impedance mode). Clearing a TRISC bit (= 0) will make the corresponding PORTC pin an output (i.e., put the contents of the output latch on the selected pin). PORTC is multiplexed with several peripheral functions (Table 3-5). PORTC pins have Schmitt Trigger input buffers. When enabling peripheral functions, care should be taken in defining TRIS bits for each PORTC pin. Some peripherals override the TRIS bit to make a pin an output, while other peripherals override the TRIS bit to make a pin an input. Since the TRIS bit override is in effect while the peripheral is enabled, read-modifywrite instructions (BSF, BCF, XORWF) with TRISC as destination should be avoided. The user should refer to the corresponding peripheral section for the correct TRIS bit settings. EXAMPLE 3-3: BANKSEL CLRF PORTC PORTC BANKSEL MOVLW TRISC 0xCF MOVWF TRISC INITIALIZING PORTC ; ; ; ; ; ; ; ; ; ; ; Select Bank for PORTC Initialize PORTC by clearing output data latches Select Bank for TRISC Value used to initialize data direction Set RC<3:0> as inputs RC<5:4> as outputs RC<7:6> as inputs 2002 Microchip Technology Inc. FIGURE 3-5: PORTC BLOCK DIAGRAM (PERIPHERAL OUTPUT OVERRIDE) Port/Peripheral Select(1) Peripheral Data Out Data Bus WR Port 0 D CK VDD Q Q P VDD 1 Data Latch WR TRIS D CK I/O pin Q Q N VSS TRIS Latch VSS Schmitt Trigger RD TRIS Peripheral OE(2) Q RD Port D EN Peripheral Input Note 1: Port/Peripheral select signal selects between port data and peripheral output. 2: Peripheral OE (output enable) is only activated if peripheral select is active. DS39597B-page 25 PIC16F72 TABLE 3-5: PORTC FUNCTIONS Name Bit# Buffer Type Function RC0/T1OSO/T1CKI bit 0 ST Input/output port pin or Timer1 oscillator output/Timer1 clock input. RC1/T1OSI bit 1 ST Input/output port pin or Timer1 oscillator input. RC2/CCP1 bit 2 ST Input/output port pin or Capture1 input/Compare1 output/PWM1 output. RC3/SCK/SCL bit 3 ST RC3 can also be the synchronous serial clock for both SPI and I2C modes. RC4/SDI/SDA bit 4 ST RC4 can also be the SPI Data In (SPI mode) or data I/O (I2C mode). RC5/SDO bit 5 ST Input/output port pin or Synchronous Serial Port data output. RC6 bit 6 ST Input/output port pin. RC7 bit 7 ST Input/output port pin. Legend: ST = Schmitt Trigger input TABLE 3-6: SUMMARY OF REGISTERS ASSOCIATED WITH PORTC Value on all other RESETS Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR 07h PORTC RC7 RC6 RC5 RC4 RC3 RC2 RC1 RC0 xxxx xxxx uuuu uuuu 87h TRISC PORTC Data Direction Register 1111 1111 1111 1111 Legend: x = unknown, u = unchanged DS39597B-page 26 2002 Microchip Technology Inc. PIC16F72 4.0 READING PROGRAM MEMORY 4.1 The FLASH Program Memory is readable during normal operation over the entire VDD range. It is indirectly addressed through Special Function Registers (SFR). Up to 14-bit wide numbers can be stored in memory for use as calibration parameters, serial numbers, packed 7-bit ASCII, etc. Executing a program memory location containing data that forms an invalid instruction results in a NOP. There are five SFRs used to read the program and memory: * * * * * PMADR The address registers can address up to a maximum of 8K words of program FLASH. When selecting a program address value, the MSByte of the address is written to the PMADRH register and the LSByte is written to the PMADRL register. The upper MSbits of PMADRH must always be clear. 4.2 PMCON1 Register PMCON1 is the control register for memory accesses. The control bit RD initiates read operations. This bit cannot be cleared, only set, in software. It is cleared in hardware at the completion of the read operation. PMCON1 PMDATL PMDATH PMADRL PMADRH The program memory allows word reads. Program memory access allows for checksum calculation and reading calibration tables. When interfacing to the program memory block, the PMDATH:PMDATL registers form a two-byte word, which holds the 14-bit data for reads. The PMADRH:PMADRL registers form a two-byte word, which holds the 13-bit address of the FLASH location being accessed. This device has up to 2K words of program FLASH, with an address range from 0h to 07FFh. The unused upper bits PMDATH<7:6> and PMADRH<7:5> are not implemented and read as zeros. REGISTER 4-1: PMCON1: PROGRAM MEMORY CONTROL REGISTER 1 (ADDRESS 18Ch) R-1 U-0 U-0 U-0 U-0 U-0 U-0 R/S-0 reserved -- -- -- -- -- -- RD bit 7 bit 0 bit 7 Reserved: Read as `1' bit 6-1 Unimplemented: Read as `0' bit 0 RD: Read Control bit 1 = Initiates a FLASH read, RD is cleared in hardware. The RD bit can only be set (not cleared) in software. 0 = Does not initiate a FLASH read Legend: W = Writable bit U = Unimplemented bit, read as `0' R = Readable bit S = Settable bit -n = Value at POR `1' = Bit is set `0' = Bit is cleared x = Bit is unknown 2002 Microchip Technology Inc. DS39597B-page 27 PIC16F72 4.3 Reading the FLASH Program Memory 4.4 To read a program memory location, the user must write two bytes of the address to the PMADRL and PMADRH registers and then set control bit, RD (PMCON1<0>). Once the read control bit is set, the program memory FLASH controller will use the second instruction cycle after to read the data. This causes the second instruction immediately following the "BSF PMCON1,RD" instruction to be ignored. The data is available in the very next cycle in the PMDATL and PMDATH registers; therefore, it can be read as two bytes in the following instructions. PMDATL and PMDATH registers will hold this value until another read, or until it is written to by the user (during a write operation). EXAMPLE 4-1: BANKSEL MOVLW MOVWF MOVLW MOVWF BANKSEL BSF NOP NOP BANKSEL PMDATL MOVF PMDATL, W MOVF PMDATH, W Address The FLASH program memory control can read anywhere within the program memory, whether or not the program memory is code protected. This does not compromise the code, because there is no way to rewrite a portion of the program memory, or leave contents of a program memory read in a register while changing modes. FLASH PROGRAM READ PMADRH MS_PROG_EE_ADDR PMADRH LS_PROG_EE_ADDR PMADRL PMCON1 PMCON1, RD TABLE 4-1: Operation During Code Protect ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; Select Bank for PMADRH MS Byte of Program Address to read LS Byte of Program Address to read Select Bank for PMCON1 EE Read Any instructions here are ignored as program memory is read in second cycle after BSF PMCON1,RD First instruction after BSF PMCON1,RD executes normally Select Bank for PMDATL W = LS Byte of Program PMDATL W = MS Byte of Program PMDATL REGISTERS ASSOCIATED WITH PROGRAM FLASH Name Bit 7 Bit 6 10Dh PMADRL 10Fh PMADRH 10Ch PMDATL 10Eh PMDATH -- -- 18Ch PMCON1 --(1) -- Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Address Register Low Byte -- -- -- Value on all other RESETS xxxx xxxx uuuu uuuu Address Register High Byte xxxx xxxx uuuu uuuu Data Register Low Byte xxxx xxxx uuuu uuuu Data Register High Byte -- Value on POR, BOR -- -- xxxx xxxx uuuu uuuu -- -- RD 1--- ---0 1--- ---0 Legend: x = unknown, u = unchanged, r = reserved, - = unimplemented, read as '0'. Shaded cells are not used during FLASH access. Note 1: This bit always reads as a `1'. DS39597B-page 28 2002 Microchip Technology Inc. PIC16F72 5.0 TIMER0 MODULE Counter mode is selected by setting bit T0CS (OPTION<5>). In Counter mode, Timer0 will increment, either on every rising or falling edge of pin RA4/ T0CKI. The incrementing edge is determined by the Timer0 Source Edge Select bit T0SE (OPTION<4>). Clearing bit T0SE selects the rising edge. Restrictions on the external clock input are discussed in detail in Section 5.3. The Timer0 module timer/counter has the following features: * * * * * * 8-bit timer/counter Readable and writable 8-bit software programmable prescaler Internal or external clock select Interrupt on overflow from FFh to 00h Edge select for external clock The prescaler is mutually exclusively shared between the Timer0 module and the Watchdog Timer. The prescaler is not readable or writable. Section 5.4 details the operation of the prescaler. Figure 5-1 is a block diagram of the Timer0 module and the prescaler shared with the WDT. 5.2 Additional information on the Timer0 module is available in the PICmicroTM Mid-Range MCU Family Reference Manual (DS33023). 5.1 The TMR0 interrupt is generated when the TMR0 register overflows from FFh to 00h. This overflow sets bit TMR0IF (INTCON<2>). The interrupt can be masked by clearing bit TMR0IE (INTCON<5>). Bit TMR0IF must be cleared in software by the Timer0 module Interrupt Service Routine, before re-enabling this interrupt. The TMR0 interrupt cannot awaken the processor from SLEEP, since the timer is shut-off during SLEEP. Timer0 Operation Timer mode is selected by clearing bit T0CS (OPTION<5>). In Timer mode, the Timer0 module will increment every instruction cycle (without prescaler). If the TMR0 register is written, the increment is inhibited for the following two instruction cycles. The user can work around this by writing an adjusted value to the TMR0 register. FIGURE 5-1: Timer0 Interrupt BLOCK DIAGRAM OF THE TIMER0/WDT PRESCALER CLKO (= FOSC/4) Data Bus 0 8 M U X 1 0 1 RA4/T0CKI pin T0SE M U X T0CS SYNC 2 Cycles TMR0 reg Set Flag bit TMR0IF on Overflow PSA PRESCALER 0 Watchdog Timer 1 M U X 8-bit Prescaler 8 8 - to - 1MUX PS2:PS0 PSA WDT Enable bit 1 0 MUX PSA WDT Time-out Note: T0CS, T0SE, PSA, PS2:PS0 are (OPTION<5:0>). 2002 Microchip Technology Inc. DS39597B-page 29 PIC16F72 5.3 Using Timer0 with an External Clock Timer0 module means that there is no prescaler for the Watchdog Timer, and vice-versa. This prescaler is not readable or writable (see Figure 5-1). When no prescaler is used, the external clock input is the same as the prescaler output. The synchronization of T0CKI, with the internal phase clocks, is accomplished by sampling the prescaler output on the Q2 and Q4 cycles of the internal phase clocks. Therefore, it is necessary for T0CKI to be high for at least 2 TOSC (and a small RC delay of 20 ns) and low for at least 2 TOSC (and a small RC delay of 20 ns). Refer to the electrical specification of the desired device. 5.4 The PSA and PS2:PS0 bits (OPTION<3:0>) determine the prescaler assignment and prescale ratio. When assigned to the Timer0 module, all instructions writing to the TMR0 register (e.g., CLRF 1, MOVWF 1, BSF 1,x....etc.) will clear the prescaler. When assigned to WDT, a CLRWDT instruction will clear the prescaler along with the Watchdog Timer. The prescaler is not readable or writable. Note: Prescaler There is only one prescaler available, which is mutually exclusively shared between the Timer0 module and the Watchdog Timer. A prescaler assignment for the TABLE 5-1: Address 01h,101h REGISTERS ASSOCIATED WITH TIMER0 Name TMR0 0Bh,8Bh, INTCON 10Bh,18Bh 81h,181h Writing to TMR0 when the prescaler is assigned to Timer0, will clear the prescaler count but will not change the prescaler assignment. Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Timer0 Module Register GIE PEIE OPTION RBPU INTEDG Value on all other RESETS xxxx xxxx uuuu uuuu TMR0IE INTE T0CS Value on POR, BOR T0SE RBIE TMR0IF INTF RBIF 0000 000x 0000 000u PSA PS0 PS2 PS1 1111 1111 1111 1111 Legend: x = unknown, u = unchanged, - = unimplemented locations read as `0'. Shaded cells are not used by Timer0. DS39597B-page 30 2002 Microchip Technology Inc. PIC16F72 6.0 TIMER1 MODULE 6.1 The Timer1 module timer/counter has the following features: * 16-bit timer/counter (Two 8-bit registers; TMR1H and TMR1L) * Readable and writable (both registers) * Internal or external clock select * Interrupt on overflow from FFFFh to 0000h * RESET from CCP module trigger Timer1 Operation Timer1 can operate in one of these modes: * As a timer * As a synchronous counter * As an asynchronous counter The Operating mode is determined by the clock select bit, TMR1CS (T1CON<1>). Timer1 has a control register, shown in Register 6-1. Timer1 can be enabled/disabled by setting/clearing control bit TMR1ON (T1CON<0>). In Timer mode, Timer1 increments every instruction cycle. In Counter mode, it increments on every rising edge of the external clock input. Figure 6-2 is a simplified block diagram of the Timer1 module. When the Timer1 oscillator is enabled (T1OSCEN is set), the RC1/T1OSI and RC0/T1OSO/T1CKI pins become inputs. That is, the TRISC<1:0> value is ignored. Additional information on timer modules is available in the PICmicroTM Mid-Range MCU Reference Manual, (DS33023). Timer1 also has an internal "RESET input". This RESET can be generated by the CCP module (Section 8.0). REGISTER 6-1: T1CON: TIMER1 CONTROL REGISTER (ADDRESS 10h) U-0 U-0 R/W-0 R/W-0 -- -- T1CKPS1 T1CKPS0 R/W-0 R/W-0 R/W-0 T1OSCEN T1SYNC TMR1CS R/W-0 TMR1ON bit 7 bit 0 bit 7-6 Unimplemented: Read as `0' bit 5-4 T1CKPS1:T1CKPS0: Timer1 Input Clock Prescale Select bits 11 = 1:8 Prescale value 10 = 1:4 Prescale value 01 = 1:2 Prescale value 00 = 1:1 Prescale value bit 3 T1OSCEN: Timer1 Oscillator Enable Control bit 1 = Oscillator is enabled 0 = Oscillator is shut-off (The oscillator inverter is turned off to eliminate power drain.) bit 2 T1SYNC: Timer1 External Clock Input Synchronization Control bit TMR1CS = 1: 1 = Do not synchronize external clock input 0 = Synchronize external clock input TMR1CS = 0: This bit is ignored. Timer1 uses the internal clock when TMR1CS = `0'. bit 1 TMR1CS: Timer1 Clock Source Select bit 1 = External clock from pin RC0/T1OSO/T1CKI (on the rising edge) 0 = Internal clock (FOSC/4) bit 0 TMR1ON: Timer1 On bit 1 = Enables Timer1 0 = Stops Timer1 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared 2002 Microchip Technology Inc. x = Bit is unknown DS39597B-page 31 PIC16F72 6.2 Timer1 Operation in Timer Mode 6.4 Timer mode is selected by clearing the TMR1CS (T1CON<1>) bit. In this mode, the input clock to the timer is FOSC/4. The synchronize control bit T1SYNC (T1CON<2>) has no effect, since the internal clock is always in sync. 6.3 Counter mode is selected by setting bit TMR1CS. In this mode, the timer increments on every rising edge of clock input on pin RC1/T1OSI when bit T1OSCEN is set, or on pin RC0/T1OSO/T1CKI when bit T1OSCEN is cleared. Timer1 Counter Operation If T1SYNC is cleared, then the external clock input is synchronized with internal phase clocks. The synchronization is done after the prescaler stage. The prescaler stage is an asynchronous ripple counter. Timer1 may operate in Asynchronous or Synchronous mode, depending on the setting of the TMR1CS bit. When Timer1 is being incremented via an external source, increments occur on a rising edge. After Timer1 is enabled in Counter mode, the module must first have a falling edge before the counter begins to increment. FIGURE 6-1: Timer1 Operation in Synchronized Counter Mode In this configuration, during SLEEP mode, Timer1 will not increment even if the external clock is present, since the synchronization circuit is shut-off. The prescaler, however, will continue to increment. TIMER1 INCREMENTING EDGE T1CKI (Default High) T1CKI (Default Low) Note: Arrows indicate counter increments. FIGURE 6-2: TIMER1 BLOCK DIAGRAM Set Flag bit TMR1IF on Overflow TMR1H Synchronized Clock Input 0 TMR1 TMR1L 1 TMR1ON On/Off T1OSC RC0/T1OSO/T1CKI RC1/T1OSI T1SYNC (2) 1 T1OSCEN FOSC/4 Enable Internal Oscillator(1) Clock Synchronize Prescaler 1, 2, 4, 8 det 0 2 T1CKPS1:T1CKPS0 TMR1CS Q Clock Note 1: When the T1OSCEN bit is cleared, the inverter is turned off. This eliminates power drain. DS39597B-page 32 2002 Microchip Technology Inc. PIC16F72 6.5 Timer1 Operation in Asynchronous Counter Mode If control bit T1SYNC (T1CON<2>) is set, the external clock input is not synchronized. The timer continues to increment asynchronous to the internal phase clocks. The timer will continue to run during SLEEP and can generate an interrupt on overflow, that will wake-up the processor. However, special precautions in software are needed to read/write the timer (Section 6.5.1). In Asynchronous Counter mode, Timer1 cannot be used as a time base for capture or compare operations. 6.5.1 For writes, it is recommended that the user simply stop the timer and write the desired values. A write contention may occur by writing to the timer registers, while the register is incrementing. This may produce an unpredictable value in the timer register. Data in the Timer1 register (TMR1) may become corrupted. Corruption occurs when the timer enable is turned off at the same instant that a ripple carry occurs in the timer module. Reading the 16-bit value requires some care. Examples 12-2 and 12-3 in the PICmicroTM Mid-Range MCU Family Reference Manual (DS33023) show how to read and write Timer1 when it is running in Asynchronous mode. Timer1 Oscillator A crystal oscillator circuit is built between pins T1OSI (input) and T1OSO (amplifier output). It is enabled by setting control bit T1OSCEN (T1CON<3>). The oscillator is a low power oscillator rated up to 200 kHz. It will continue to run during SLEEP. It is primarily intended for a 32 kHz crystal. Table 6-1 shows the capacitor selection for the Timer1 oscillator. The Timer1 oscillator is identical to the LP oscillator. The user must provide a software time delay to ensure proper oscillator start-up. 2002 Microchip Technology Inc. CAPACITOR SELECTION FOR THE TIMER1 OSCILLATOR Osc Type Freq C1 C2 LP 32 kHz 33 pF 33 pF 100 kHz 15 pF 15 pF 200 kHz 15 pF 15 pF These values are for design guidance only. Note 1: Higher capacitance increases the stability of oscillator, but also increases the start-up time. 2: Since each resonator/crystal has its own characteristics, the user should consult the resonator/crystal manufacturer for appropriate values of external components. READING AND WRITING TIMER1 IN ASYNCHRONOUS COUNTER MODE Reading TMR1H or TMR1L while the timer is running from an external asynchronous clock will ensure a valid read (taken care of in hardware). However, the user should keep in mind that reading the 16-bit timer in two 8-bit values itself, poses certain problems, since the timer may overflow between the reads. 6.6 TABLE 6-1: 6.7 Timer1 Interrupt The TMR1 register pair (TMR1H:TMR1L) increments from 0000h to FFFFh and rolls over to 0000h. The TMR1 interrupt, if enabled, is generated on overflow, which is latched in interrupt flag bit TMR1IF (PIR1<0>). This interrupt can be enabled/disabled by setting/ clearing TMR1 interrupt enable bit TMR1IE (PIE1<0>). 6.8 Resetting Timer1 Using a CCP Trigger Output If the CCP module is configured in Compare mode to generate a "special event trigger" signal (CCP1M3:CCP1M0 = 1011), the signal will reset Timer1 and start an A/D conversion (if the A/D module is enabled). Note: The special event triggers from the CCP1 module will not set interrupt flag bit TMR1IF (PIR1<0>). Timer1 must be configured for either Timer or Synchronized Counter mode to take advantage of this feature. If Timer1 is running in Asynchronous Counter mode, this RESET operation may not work. In the event that a write to Timer1 coincides with a special event trigger from CCP1, the write will take precedence. In this mode of operation, the CCPR1H:CCPR1L registers pair effectively becomes the period register for Timer1. DS39597B-page 33 PIC16F72 6.9 Resetting Timer1 Register Pair (TMR1H, TMR1L) 6.10 Timer1 Prescaler The prescaler counter is cleared on writes to the TMR1H or TMR1L registers. TMR1H and TMR1L registers are not reset to 00h on a POR, or any other RESET, except by the CCP1 special event triggers. T1CON register is reset to 00h on a Power-on Reset or a Brown-out Reset, which shuts off the timer and leaves a 1:1 prescale. In all other RESETS, the register is unaffected. TABLE 6-2: Address REGISTERS ASSOCIATED WITH TIMER1 AS A TIMER/COUNTER Name 0Bh,8Bh, INTCON 10Bh,18Bh 0Ch PIR1 Value on all other RESETS Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 0000 000u -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF 0000 0000 0000 0000 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE 0000 0000 0000 0000 8Ch PIE1 0Eh TMR1L Holding register for the Least Significant Byte of the 16-bit TMR1 Register xxxx xxxx uuuu uuuu 0Fh TMR1H Holding register for the Most Significant Byte of the 16-bit TMR1 Register xxxx xxxx uuuu uuuu 10h T1CON Legend: -- -- T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON --00 0000 --uu uuuu x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by the Timer1 module. DS39597B-page 34 2002 Microchip Technology Inc. PIC16F72 7.0 TIMER2 MODULE The Timer2 module timer has the following features: * * * * * * * 8-bit timer (TMR2 register) 8-bit period register (PR2) Readable and writable (both registers) Software programmable prescaler (1:1, 1:4, 1:16) Software programmable postscaler (1:1 to 1:16) Interrupt on TMR2 match of PR2 SSP module optional use of TMR2 output to generate clock shift Timer2 has a control register, shown in Register 7-1. Timer2 can be shut-off by clearing control bit TMR2ON (T2CON<2>) to minimize power consumption. Figure 7-1 is a simplified block diagram of the Timer2 module. Additional information on timer modules is available in the PICmicroTM Mid-Range MCU Reference Manual, (DS33023). 7.1 Timer2 Operation Timer2 can be used as the PWM time-base for PWM mode of the CCP module. The TMR2 register is readable and writable, and is cleared on any device RESET. The input clock (FOSC/4) has a prescale option of 1:1, 1:4 or 1:16, selected by control bits T2CKPS1:T2CKPS0 (T2CON<1:0>). The match output of TMR2 goes through a 4-bit postscaler (which gives a 1:1 to 1:16 scaling inclusive) to generate a TMR2 interrupt (latched in flag bit TMR2IF, (PIR1<1>)). 7.2 Timer2 Prescaler and Postscaler The prescaler and postscaler counters are cleared when any of the following occurs: * A write to the TMR2 register * A write to the T2CON register * Any device RESET (Power-on Reset, MCLR , WDT Reset, or Brown-out Reset) TMR2 is not cleared when T2CON is written. 7.3 Timer2 Interrupt The Timer2 module has an 8-bit period register, PR2. Timer2 increments from 00h until it matches PR2 and then resets to 00h on the next increment cycle. PR2 is a readable and writable register. The PR2 register is initialized to FFh upon RESET. 7.4 Output of TMR2 The output of TMR2 (before the postscaler) is fed to the Synchronous Serial Port module, which optionally uses it to generate a shift clock. FIGURE 7-1: Sets Flag bit TMR2IF TIMER2 BLOCK DIAGRAM TMR2 (1) Output RESET Postscaler 1:1 to 1:16 4 EQ TMR2 reg Comparator Prescaler 1:1, 1:4, 1:16 FOSC/4 2 PR2 reg Note 1: TMR2 register output can be software selected by the SSP module as a baud clock. 2002 Microchip Technology Inc. DS39597B-page 35 PIC16F72 REGISTER 7-1: T2CON: TIMER2 CONTROL REGISTER (ADDRESS 12h) U-0 -- R/W-0 R/W-0 TOUTPS3 TOUTPS2 R/W-0 R/W-0 TOUTPS1 R/W-0 R/W-0 R/W-0 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 bit 7 bit 0 bit 7 Unimplemented: Read as `0' bit 6-3 TOUTPS3:TOUTPS0: Timer2 Output Postscale Select bits 0000 = 1:1 Postscale 0001 = 1:2 Postscale 0010 = 1:3 Postscale * * * 1111 = 1:16 Postscale bit 2 TMR2ON: Timer2 On bit 1 = Timer2 is on 0 = Timer2 is off bit 1-0 T2CKPS1:T2CKPS0: Timer2 Clock Prescale Select bits 00 = Prescaler is 1 01 = Prescaler is 4 1x = Prescaler is 16 Legend: TABLE 7-1: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared x = Bit is unknown REGISTERS ASSOCIATED WITH TIMER2 AS A TIMER/COUNTER Value on all other RESETS Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR 0Bh,8Bh, INTCON GIE 10Bh, 18Bh PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 0000 000u Address Name 0Ch PIR1 -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF -0-- 0000 0000 0000 8Ch PIE1 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE -0-- 0000 0000 0000 11h TMR2 12h T2CON 92h PR2 Legend: Timer2 Module Register -- 0000 0000 0000 0000 TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 -000 0000 -000 0000 Timer2 Period Register 1111 1111 1111 1111 x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by the Timer2 module. DS39597B-page 36 2002 Microchip Technology Inc. PIC16F72 8.0 CAPTURE/COMPARE/PWM (CCP) MODULE Additional information on the CCP module is available in the PICmicroTM Mid-Range MCU Reference Manual, (DS33023). The CCP (Capture/Compare/PWM) module contains a 16-bit register that can operate as a: TABLE 8-1: * 16-bit capture register * 16-bit compare register * PWM master/slave duty cycle register. Table 8-1 shows the timer resources of the CCP Module modes. CCP MODE - TIMER RESOURCE CCP Mode Timer Resource Capture Compare PWM Timer1 Timer1 Timer2 Capture/Compare/PWM Register1 (CCPR1) is comprised of two 8-bit registers: CCPR1L (low byte) and CCPR1H (high byte). The CCP1CON register controls the operation of CCP1. All are readable and writable. REGISTER 8-1: CCPCON1: CAPTURE/COMPARE/PWM CONTROL REGISTER 1 (ADDRESS 17h) U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 -- -- CCPxX CCPxY CCPxM3 CCPxM2 CCPxM1 CCPxM0 bit 7 bit 0 bit 7-6 Unimplemented: Read as '0' bit 5-4 CCPxX:CCPxY: PWM Least Significant bits Capture mode: Unused Compare mode: Unused PWM mode: These bits are the two LSbs of the PWM duty cycle. The eight MSbs are found in CCPRxL. bit 3-0 CCPxM3:CCPxM0: CCPx Mode Select bits 0000 = Capture/Compare/PWM disabled (resets CCPx module) 0100 = Capture mode, every falling edge 0101 = Capture mode, every rising edge 0110 = Capture mode, every 4th rising edge 0111 = Capture mode, every 16th rising edge 1000 = Compare mode, set output on match (CCPxIF bit is set) 1001 = Compare mode, clear output on match (CCPxIF bit is set) 1010 = Compare mode, generate software interrupt on match (CCPxIF bit is set, CCPx pin is unaffected) 1011 = Compare mode, trigger special event (CCPxIF bit is set, CCPx pin is unaffected); CCP1 resets TMR1 and starts an A/D conversion (if A/D module is enabled) 11xx = PWM mode Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared 2002 Microchip Technology Inc. x = Bit is unknown DS39597B-page 37 PIC16F72 8.1 8.1.2 Capture Mode In Capture mode, CCPR1H:CCPR1L captures the 16-bit value of the TMR1 register when an event occurs on pin RC2/CCP1. An event is defined as: * * * * Every falling edge Every rising edge Every 4th rising edge Every 16th rising edge 8.1.1 CCP PIN CONFIGURATION In Capture mode, the RC2/CCP1 pin should be configured as an input by setting the TRISC<2> bit. Note: If the RC2/CCP1 is configured as an output, a write to the port can cause a capture condition. FIGURE 8-1: CAPTURE MODE OPERATION BLOCK DIAGRAM Prescaler / 1, 4, 16 CCPR1H and edge detect When the Capture mode is changed, a false capture interrupt may be generated. The user should keep bit CCP1IE (PIE1<2>) clear to avoid false interrupts and should clear the flag bit CCP1IF, following any such change in Operating mode. 8.1.4 CCP PRESCALER There are four prescaler settings, specified by bits CCP1M3:CCP1M0. Whenever the CCP module is turned off, or the CCP module is not in Capture mode, the prescaler counter is cleared. This means that any RESET will clear the prescaler counter. Switching from one capture prescaler to another may generate an interrupt. Also, the prescaler counter will not be cleared, therefore, the first capture may be from a non-zero prescaler. Example 8-1 shows the recommended method for switching between capture prescalers. This example also clears the prescaler counter and will not generate the "false" interrupt. CCPR1L CLRF MOVLW Capture Enable MOVWF TMR1H SOFTWARE INTERRUPT EXAMPLE 8-1: Set Flag bit CCP1IF (PIR1<2>) RC2/CCP1 pin Timer1 must be running in Timer mode or Synchronized Counter mode for the CCP module to use the capture feature. In Asynchronous Counter mode, the capture operation may not work. 8.1.3 An event is selected by control bits CCP1M3:CCP1M0 (CCP1CON<3:0>). When a capture is made, the interrupt request flag bit CCP1IF (PIR1<2>) is set. It must be cleared in software. If another capture occurs before the value in register CCPR1 is read, the old captured value is overwritten by the new captured value. TIMER1 MODE SELECTION TMR1L CHANGING BETWEEN CAPTURE PRESCALERS CCP1CON ; Turn CCP module off NEW_CAPT_PS ; Load the W reg with ; the new prescaler ; mode value and CCP ON CCP1CON ; Load CCP1CON with ; this value CCP1CON<3:0> Q's DS39597B-page 38 2002 Microchip Technology Inc. PIC16F72 8.2 8.2.1 Compare Mode In Compare mode, the 16-bit CCPR1 register value is constantly compared against the TMR1 register pair value. When a match occurs, the RC2/CCP1 pin is: * Driven High * Driven Low * Remains Unchanged The action on the pin is based on the value of control bits CCP1M3:CCP1M0 (CCP1CON<3:0>). At the same time, interrupt flag bit CCP1IF is set. The output may become inverted when the mode of the module is changed from Compare/Clear on Match (CCPxM<3:0> = `1001') to Compare/Set on Match (CCPxM<3:0> = `1000'). This may occur as a result of any operation that selectively clears bit CCPxM0, such as a BCF instruction. When this condition occurs, the output becomes inverted when the instruction is executed. It will remain inverted for all following Compare operations, until the module is reset. FIGURE 8-2: COMPARE MODE OPERATION BLOCK DIAGRAM CCP PIN CONFIGURATION The user must configure the RC2/CCP1 pin as an output by clearing the TRISC<2> bit. Note: 8.2.2 Clearing the CCP1CON register will force the RC2/CCP1 compare output latch to the default low level. This is not the data latch. TIMER1 MODE SELECTION Timer1 must be running in Timer mode or Synchronized Counter mode, if the CCP module is using the compare feature. In Asynchronous Counter mode, the compare operation may not work. 8.2.3 SOFTWARE INTERRUPT MODE When generate software interrupt is chosen, the CCP1 pin is not affected. Only a CCP interrupt is generated (if enabled). 8.2.4 SPECIAL EVENT TRIGGER In this mode, an internal hardware trigger is generated that may be used to initiate an action. Special event trigger will: The special event trigger output of CCP1 resets the TMR1 register pair. This allows the CCPR1 register to effectively be a 16-bit programmable period register for Timer1. * RESET Timer1, but not set interrupt flag bit TMR1IF (PIR1<0>) * Set bit GO/DONE (ADCON0<2>) bit, which starts an A/D conversion The special trigger output of CCP1 resets the TMR1 register pair, and starts an A/D conversion (if the A/D module is enabled). Note: Special Event Trigger Set Flag bit CCP1IF (PIR1<2>) The special event trigger from the CCP1 module will not set interrupt flag bit TMR1IF (PIR1<0>). CCPR1H CCPR1L Q S Output Logic Match RC2/CCP1 R pin TRISC<2> Output Enable CCP1CON<3:0> Mode Select 2002 Microchip Technology Inc. Comparator TMR1H TMR1L DS39597B-page 39 PIC16F72 TABLE 8-2: REGISTERS ASSOCIATED WITH CAPTURE, COMPARE, AND TIMER1 Value on all other RESETS Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR 0Bh,8Bh INTCON 10Bh,18Bh GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 0000 000u -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF -0-- 0000 0000 0000 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE -0-- 0000 0000 0000 Address 0Ch PIR1 8Ch PIE1 87h TRISC PORTC Data Direction Register 1111 1111 1111 1111 0Eh TMR1L Holding Register for the Least Significant Byte of the 16-bit TMR1 Register xxxx xxxx uuuu uuuu 0Fh TMR1H Holding Register for the Most Significant Byte of the 16-bit TMR1 Register xxxx xxxx uuuu uuuu 10h T1CON 15h CCPR1L Capture/Compare/PWM Register1 (LSB) xxxx xxxx uuuu uuuu 16h CCPR1H Capture/Compare/PWM Register1 (MSB) xxxx xxxx uuuu uuuu 17h CCP1CON Legend: -- -- -- -- T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON --00 0000 --uu uuuu CCP1X CCP1Y CCP1M3 CCP1M2 CCP1M1 CCP1M0 --00 0000 --00 0000 x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by Capture and Timer1. DS39597B-page 40 2002 Microchip Technology Inc. PIC16F72 8.3 8.3.1 PWM Mode In Pulse Width Modulation (PWM) mode, the CCP1 pin produces up to a 10-bit resolution PWM output. Since the CCP1 pin is multiplexed with the PORTC data latch, the TRISC<2> bit must be cleared to make the CCP1 pin an output. Note: Clearing the CCP1CON register will force the CCP1 PWM output latch to the default low level. This is not the PORTC I/O data latch. PWM PERIOD The PWM period is specified by writing to the PR2 register. The PWM period can be calculated using the formula in Equation 8-1. EQUATION 8-1: PWM PERIOD PWM period = [(PR2) + 1] * 4 * TOSC * (TMR2 prescale value) PWM frequency is defined as 1 / [PWM period]. Figure 8-3 shows a simplified block diagram of the CCP module in PWM mode. When TMR2 is equal to PR2, the following three events occur on the next increment cycle: For a step by step procedure on how to set up the CCP module for PWM operation, see Section 8.3.3. * TMR2 is cleared * The CCP1 pin is set (exception: if PWM duty cycle = 0%, the CCP1 pin will not be set) * The PWM duty cycle is latched from CCPR1L into CCPR1H FIGURE 8-3: SIMPLIFIED PWM BLOCK DIAGRAM CCP1CON<5:4> Duty Cycle Registers Note: CCPR1L The Timer2 postscaler (see Section 7.0) is not used in the determination of the PWM frequency. The postscaler could be used to have a servo update rate at a different frequency than the PWM output. CCPR1H (Slave) 8.3.2 R Comparator Q RC2/CCP1 TMR2 (Note 1) S TRISC<2> Comparator Clear Timer, CCP1 pin and latch D.C. PR2 PWM DUTY CYCLE The PWM duty cycle is specified by writing to the CCPR1L register and to the CCP1CON<5:4> bits. Up to 10-bit resolution is available: the CCPR1L contains the eight MSbs and the CCP1CON<5:4> contains the two LSbs. This 10-bit value is represented by CCPR1L:CCP1CON<5:4>. Equation 8-2 is used to calculate the PWM duty cycle in time. EQUATION 8-2: PWM DUTY CYCLE Note 1: 8-bit timer is concatenated with 2-bit internal Q clock or 2 bits of the prescaler to create 10-bit time-base. PWM duty cycle = (CCPR1L:CCP1CON<5:4>) * TOSC * (TMR2 prescale value) A PWM output (Figure 8-4) has a time-base (period) and a time that the output stays high (duty cycle). The frequency of the PWM is the inverse of the period (1/period). CCPR1L and CCP1CON<5:4> can be written to at any time, but the duty cycle value is not latched into CCPR1H until after a match between PR2 and TMR2 occurs (i.e., the period is complete). In PWM mode, CCPR1H is a read only register. FIGURE 8-4: PWM OUTPUT Period The CCPR1H register and a 2-bit internal latch are used to double buffer the PWM duty cycle. This double buffering is essential for glitchless PWM operation. When the CCPR1H and 2-bit latch match TMR2, concatenated with an internal 2-bit Q clock or 2 bits of the TMR2 prescaler, the CCP1 pin is cleared. Duty Cycle TMR2 = PR2 TMR2 = Duty Cycle TMR2 = PR2 2002 Microchip Technology Inc. DS39597B-page 41 PIC16F72 Maximum PWM resolution (bits) for a given PWM frequency is calculated using Equation 8-3. EQUATION 8-3: PWM MAX RESOLUTION PWM Maximum Resolution = FOSC log ( FPWM ) log(2) 8.3.3 The following steps should be taken when configuring the CCP module for PWM operation: 1. 2. bits 3. Note: If the PWM duty cycle value is longer than the PWM period, the CCP1 pin will not be cleared. For a sample PWM period and duty cycle calculation, see the PICmicroTM Mid-Range MCU Reference Manual (DS33023). TABLE 8-3: SET-UP FOR PWM OPERATION 4. 5. Set the PWM period by writing to the PR2 register. Set the PWM duty cycle by writing to the CCPR1L register and CCP1CON<5:4> bits. Make the CCP1 pin an output by clearing the TRISC<2> bit. Set the TMR2 prescale value and enable Timer2 by writing to T2CON. Configure the CCP1 module for PWM operation. EXAMPLE PWM FREQUENCIES AND RESOLUTIONS AT 20 MHz PWM Frequency 1.22 kHz 4.88 kHz 19.53 kHz 78.12 kHz 156.3 kHz 208.3 kHz Timer Prescaler (1, 4, 16) PR2 Value Maximum Resolution (bits) TABLE 8-4: 16 0xFF 10 4 0xFF 10 1 0xFF 10 1 0x3F 8 1 0x1F 7 1 0x17 5.5 REGISTERS ASSOCIATED WITH PWM AND TIMER2 Value on all other RESETS Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR 0Bh,8Bh INTCON 10Bh,18Bh GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 0000 000u -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF -0-- 0000 0000 0000 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE -0-- 0000 0000 0000 Address 0Ch PIR1 8Ch PIE1 87h TRISC 11h 92h PORTC Data Direction Register 1111 1111 1111 1111 TMR2 Timer2 Module Register 0000 0000 0000 0000 PR2 Timer2 Module Period Register 1111 1111 1111 1111 12h T2CON 15h CCPR1L Capture/Compare/PWM Register1 (LSB) 16h CCPR1H Capture/Compare/PWM Register1 (MSB) 17h CCP1CON Legend: -- -- TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 -000 0000 -000 0000 -- CCP1X CCP1Y xxxx xxxx uuuu uuuu xxxx xxxx uuuu uuuu CCP1M3 CCP1M2 CCP1M1 CCP1M0 --00 0000 --00 0000 x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by PWM and Timer2. DS39597B-page 42 2002 Microchip Technology Inc. PIC16F72 9.0 9.1 SYNCHRONOUS SERIAL PORT (SSP) MODULE SSP Module Overview The Synchronous Serial Port (SSP) module is a serial interface useful for communicating with other peripheral or microcontroller devices. These peripheral devices may be Serial EEPROMs, shift registers, display drivers, A/D converters, etc. The SSP module can operate in one of two modes: 9.2 SPI Mode This section contains register definitions operational characteristics of the SPI module. and SPI mode allows 8 bits of data to be synchronously transmitted and received simultaneously. To accomplish communication, typically three pins are used: * Serial Data Out (SDO) * Serial Data In (SDI) * Serial Clock (SCK) RC5/SDO RC4/SDI/SDA RC3/SCK/SCL * Serial Peripheral Interface (SPI) * Inter-Integrated Circuit (I2C) Additionally, a fourth pin may be used when in a Slave mode of operation: An overview of I2C operations and additional information on the SSP module can be found in the PICmicroTM Mid-Range MCU Family Reference Manual (DS33023). * Slave Select (SS) Refer to Application Note AN578, "Use of the SSP Module in the I 2C Multi-Master Environment." RA5/AN4/SS When initializing the SPI, several options need to be specified. This is done by programming the appropriate control bits in the SSPCON register (SSPCON<5:0>) and SSPSTAT<7:6>. These control bits allow the following to be specified: * * * * Master mode (SCK is the clock output) Slave mode (SCK is the clock input) Clock Polarity (IDLE state of SCK) Clock edge (output data on rising/falling edge of SCK) * Clock Rate (Master mode only) * Slave Select mode (Slave mode only) 2002 Microchip Technology Inc. DS39597B-page 43 PIC16F72 REGISTER 9-1: SSPSTAT: SYNCHRONOUS SERIAL PORT STATUS REGISTER (ADDRESS 94h) R/W-0 R/W-0 R-0 R-0 R-0 R-0 R-0 R-0 SMP CKE D/A P S R/W UA BF bit 7 bit 0 bit 7 SMP: SPI Data Input Sample Phase bits SPI Master mode: 1 = Input data sampled at end of data output time 0 = Input data sampled at middle of data output time (Microwire(R)) SPI Slave mode: SMP must be cleared when SPI is used in Slave mode I2 C mode: This bit must be maintained clear bit 6 CKE: SPI Clock Edge Select bits (Figure 9-2, Figure 9-3, and Figure 9-4) SPI mode, CKP = 0: 1 = Data transmitted on rising edge of SCK (Microwire alternate) 0 = Data transmitted on falling edge of SCK SPI mode, CKP = 1: 1 = Data transmitted on falling edge of SCK (Microwire default) 0 = Data transmitted on rising edge of SCK I2 C mode: This bit must be maintained clear bit 5 D/A: Data/Address bit (I2C mode only) 1 = Indicates that the last byte received or transmitted was data 0 = Indicates that the last byte received or transmitted was address bit 4 P: STOP bit (I2C mode only) - This bit is cleared when the SSP module is disabled, or when the START bit is detected last. SSPEN is cleared. 1 = Indicates that a STOP bit has been detected last (this bit is `0' on RESET) 0 = STOP bit was not detected last bit 3 S: START bit (I2C mode only) - This bit is cleared when the SSP module is disabled, or when the STOP bit is detected last. SSPEN is cleared. 1 = Indicates that a START bit has been detected last (this bit is `0' on RESET) 0 = START bit was not detected last bit 2 R/W: Read/Write Information bit (I2C mode only) - This bit holds the R/W bit information following the last address match. This bit is only valid from the address match to the next START bit, STOP bit, or ACK bit. 1 = Read 0 = Write bit 1 UA: Update Address bit (10-bit I2C mode only) 1 = Indicates that the user needs to update the address in the SSPADD register 0 = Address does not need to be updated bit 0 BF: Buffer Full Status bit Receive (SPI and I2 C modes): 1 = Receive complete, SSPBUF is full 0 = Receive not complete, SSPBUF is empty Transmit (I2 C mode only): 1 = Transmit in progress, SSPBUF is full 0 = Transmit complete, SSPBUF is empty Legend: R = Readable bit - n = Value at POR DS39597B-page 44 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown 2002 Microchip Technology Inc. PIC16F72 REGISTER 9-2: SSPCON: SYNC SERIAL PORT CONTROL REGISTER (ADDRESS 14h) R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 WCOL SSPOV SSPEN CKP SSPM3 SSPM2 SSPM1 SSPM0 bit 7 bit 0 bit 7 WCOL: Write Collision Detect bit 1 = The SSPBUF register is written while it is still transmitting the previous word (must be cleared in software) 0 = No collision bit 6 SSPOV: Receive Overflow Indicator bit In SPI mode: 1 = A new byte is received while the SSPBUF register is still holding the previous data. In case of overflow, the data in SSPSR is lost. Overflow can only occur in Slave mode. The user must read the SSPBUF, even if only transmitting data, to avoid setting overflow. In Master mode, the overflow bit is not set since each new reception (and transmission) is initiated by writing to the SSPBUF register. 0 = No overflow In I2 C mode: 1 = A byte is received while the SSPBUF register is still holding the previous byte. SSPOV is a "don't care" in Transmit mode. SSPOV must be cleared in software in either mode. 0 = No overflow bit 5 SSPEN: Synchronous Serial Port Enable bit In SPI mode: 1 = Enables serial port and configures SCK, SDO, and SDI as serial port pins 0 = Disables serial port and configures these pins as I/O port pins In I2 C mode: 1 = Enables the serial port and configures the SDA and SCL pins as serial port pins 0 = Disables serial port and configures these pins as I/O port pins In both modes, when enabled, these pins must be properly configured as input or output. bit 4 CKP: Clock Polarity Select bit In SPI mode: 1 = IDLE state for clock is a high level (Microwire(R) default) 0 = IDLE state for clock is a low level (Microwire alternate) In I2 C mode: SCK release control 1 = Enable clock 0 = Holds clock low (clock stretch - used to ensure data setup time) bit 3-0 SSPM<3:0>: Synchronous Serial Port Mode Select bits 0000 = SPI Master mode, clock = FOSC/4 0001 = SPI Master mode, clock = FOSC/16 0010 = SPI Master mode, clock = FOSC/64 0011 = SPI Master mode, clock = TMR2 output/2 0100 = SPI Slave mode, clock = SCK pin. SS pin control enabled. 0101 = SPI Slave mode, clock = SCK pin. SS pin control disabled. SS can be used as I/O pin. 0110 = I2C Slave mode, 7-bit address 0111 = I2C Slave mode, 10-bit address 1011 = I2C firmware controlled Master mode (Slave IDLE) 1110 = I2C Slave mode, 7-bit address with START and STOP bit interrupts enabled 1111 = I2C Slave mode, 10-bit address with START and STOP bit interrupts enabled Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared 2002 Microchip Technology Inc. x = Bit is unknown DS39597B-page 45 PIC16F72 FIGURE 9-1: SSP BLOCK DIAGRAM (SPI MODE) To enable the serial port, SSP enable bit, SSPEN (SSPCON<5>) must be set. To reset or reconfigure SPI mode, clear bit SSPEN, re-initialize the SSPCON register, and then set bit SSPEN. This configures the SDI, SDO, SCK, and SS pins as serial port pins. For the pins to behave as the serial port function, they must have their data direction bits (in the TRISC register) appropriately programmed. That is: Internal Data Bus Read Write SSPBUF reg * SDI must have TRISC<4> set * SDO must have TRISC<5> cleared * SCK (Master mode) must have TRISC<3> cleared * SCK (Slave mode) must have TRISC<3> set * SS must have TRISA<5> set and ADCON must be configured such that RA5 is a digital I/O SSPSR reg RC4/SDI/SDA Shift Clock bit0 RC5/SDO . SS Control Enable RA5/AN4/SS Note 1: When the SPI is in Slave mode with SS pin control enabled (SSPCON<3:0> = 0100), the SPI module will reset if the SS pin is set to VDD. Edge Select 2 Clock Select SSPM3:SSPM0 4 Edge Select RC3/SCK/ SCL 2: If the SPI is used in Slave mode with CKE = `1', then the SS pin control must be enabled. TMR2 Output 2 Prescaler TCY 4, 16, 64 TRISC<3> TABLE 9-1: REGISTERS ASSOCIATED WITH SPI OPERATION Value on all other RESETS Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR 0Bh,8Bh INTCON 10Bh,18Bh GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 0000 000u Address 0Ch PIR1 -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF -0-- 0000 0000 0000 8Ch PIE1 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE -0-- 0000 0000 0000 87h TRISC PORTC Data Direction Register 1111 1111 1111 1111 13h SSPBUF Synchronous Serial Port Receive Buffer/Transmit Register xxxx xxxx uuuu uuuu 14h SSPCON WCOL SSPOV SSPEN 85h TRISA -- -- 94h SSPSTAT -- -- CKP SSPM3 SSPM2 SSPM1 SSPM0 0000 0000 0000 0000 PORTA Data Direction Register D/A P S R/W --11 1111 --11 1111 UA BF --00 0000 --00 0000 Legend: x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by the SSP in SPI mode. DS39597B-page 46 2002 Microchip Technology Inc. PIC16F72 FIGURE 9-2: SPI MODE TIMING, MASTER MODE SCK (CKP = 0, CKE = 0) SCK (CKP = 0, CKE = 1) SCK (CKP = 1, CKE = 0) SCK (CKP = 1, CKE = 1) bit6 bit7 SDO bit5 bit2 bit3 bit4 bit1 bit0 SDI (SMP = 0) bit7 bit0 SDI (SMP = 1) bit7 bit0 SSPIF FIGURE 9-3: SPI MODE TIMING (SLAVE MODE WITH CKE = 0) SS (optional) SCK (CKP = 0) SCK (CKP = 1) bit7 SDO bit6 bit5 bit2 bit3 bit4 bit1 bit0 SDI (SMP = 0) bit7 bit0 SSPIF FIGURE 9-4: SPI MODE TIMING (SLAVE MODE WITH CKE = 1) SS SCK (CKP = 0) SCK (CKP = 1) SDO bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 SDI (SMP = 0) bit7 bit0 SSPIF 2002 Microchip Technology Inc. DS39597B-page 47 PIC16F72 9.3 SSP I 2C Mode Operation The SSP module in I 2C mode fully implements all slave functions, except general call support and provides interrupts on START and STOP bits in hardware to facilitate firmware implementations of the master functions. The SSP module implements the Standard mode specifications, as well as 7-bit and 10-bit addressing. Two pins are used for data transfer. These are the RC3/ SCK/SCL pin, which is the clock (SCL), and the RC4/ SDI/SDA pin, which is the data (SDA). The user must configure these pins as inputs or outputs through the TRISC<4:3> bits. The SSP module functions are enabled by setting SSP Enable bit SSPEN (SSPCON<5>). FIGURE 9-5: SSP BLOCK DIAGRAM (I2C MODE) Internal Data Bus Read Write Selection of any I 2C mode, with the SSPEN bit set, forces the SCL and SDA pins to be open drain, provided these pins are programmed to inputs by setting the appropriate TRISC bits. Additional information on SSP I2C operation may be found in the PICmicroTM Mid-Range MCU Reference Manual (DS33023). 9.3.1 In Slave mode, the SCL and SDA pins must be configured as inputs (TRISC<4:3> set). The SSP module will override the input state with the output data when required (slave-transmitter). When an address is matched or the data transfer after an address match is received, the hardware automatically will generate the Acknowledge (ACK) pulse, and then load the SSPBUF register with the received value currently in the SSPSR register. Either or both of the following conditions will cause the SSP module not to give this ACK pulse. a) SSPBUF Reg RC3/SCK/SCL b) Shift Clock SSPSR Reg RC4/ SDI/ SDA MSb LSb Match Detect Addr Match SSPADD Reg START and STOP Bit Detect Set, RESET S, P Bits (SSPSTAT Reg) The SSP module has five registers for I2C operation: * * * * SSP Control Register (SSPCON) SSP Status Register (SSPSTAT) Serial Receive/Transmit Buffer (SSPBUF) SSP Shift Register (SSPSR) - Not directly accessible * SSP Address Register (SSPADD) The SSPCON register allows control of the I 2C operation. Four mode selection bits (SSPCON<3:0>) allow one of the following I 2C modes to be selected: * I 2C Slave mode (7-bit address) * I 2C Slave mode (10-bit address) * I 2C Slave mode (7-bit address), with START and STOP bit interrupts enabled * I 2C Slave mode (10-bit address), with START and STOP bit interrupts enabled * I 2C Firmware controlled Master operation, Slave is IDLE DS39597B-page 48 SLAVE MODE The buffer full bit BF (SSPSTAT<0>) was set before the transfer was received. The overflow bit SSPOV (SSPCON<6>) was set before the transfer was received. In this case, the SSPSR register value is not loaded into the SSPBUF, but bit SSPIF (PIR1<3>) is set. Table 9-2 shows what happens when a data transfer byte is received, given the status of bits BF and SSPOV. The shaded cells show the condition where user software did not properly clear the overflow condition. Flag bit BF is cleared by reading the SSPBUF register while bit SSPOV is cleared through software. The SCL clock input must have a minimum high and low for proper operation. The high and low times of the I2C specification, as well as the requirement of the SSP module are shown in timing parameter #100 and parameter #101. 9.3.1.1 Addressing Once the SSP module has been enabled, it waits for a START condition to occur. Following the START condition, the eight bits are shifted into the SSPSR register. All incoming bits are sampled with the rising edge of the clock (SCL) line. The value of register SSPSR<7:1> is compared to the value of the SSPADD register. The address is compared on the falling edge of the eighth clock (SCL) pulse. If the addresses match, and the BF and SSPOV bits are clear, the following events occur: a) b) c) d) The SSPSR register value is loaded into the SSPBUF register. The buffer full bit, BF is set. An ACK pulse is generated. SSP interrupt flag bit, SSPIF (PIR1<3>) is set (interrupt is generated, if enabled) - on the falling edge of the ninth SCL pulse. 2002 Microchip Technology Inc. PIC16F72 In 10-bit Address mode, two address bytes need to be received by the slave device. The five Most Significant bits (MSbs) of the first address byte specify if this is a 10-bit address. Bit R/W (SSPSTAT<2>) must specify a write so the slave device will receive the second address byte. For a 10-bit address the first byte would equal `1111 0 A9 A8 0', where A9 and A8 are the two MSbs of the address. The sequence of events for 10-bit address is as follows, with steps 7- 9 for slave-transmitter: 1. 2. 3. 4. 5. 6. 7. 8. 9. Receive first (high) byte of address (bits SSPIF, BF, and bit UA (SSPSTAT<1>) are set). Update the SSPADD register with second (low) byte of address (clears bit UA and releases the SCL line). Read the SSPBUF register (clears bit BF) and clear flag bit SSPIF. Receive second (low) byte of address (bits SSPIF, BF, and UA are set). Update the SSPADD register with the first (high) byte of Address, if match releases SCL line, this will clear bit UA. Read the SSPBUF register (clears bit BF) and clear flag bit SSPIF. Receive Repeated START condition. Receive first (high) byte of address (bits SSPIF and BF are set). Read the SSPBUF register (clears bit BF) and clear flag bit SSPIF. 9.3.1.2 9.3.1.3 Transmission When the R/W bit of the incoming address byte is set and an address match occurs, the R/W bit of the SSPSTAT register is set. The received address is loaded into the SSPBUF register. The ACK pulse will be sent on the ninth bit, and pin RC3/SCK/SCL is held low. The transmit data must be loaded into the SSPBUF register, which also loads the SSPSR register. Then pin RC3/SCK/SCL should be enabled by setting bit CKP (SSPCON<4>). The master device must monitor the SCL pin prior to asserting another clock pulse. The slave devices may be holding off the master device by stretching the clock. The eight data bits are shifted out on the falling edge of the SCL input. This ensures that the SDA signal is valid during the SCL high time (Figure 9-7). An SSP interrupt is generated for each data transfer byte. Flag bit SSPIF must be cleared in software and the SSPSTAT register is used to determine the status of the byte. Flag bit SSPIF is set on the falling edge of the ninth clock pulse. As a slave-transmitter, the ACK pulse from the masterreceiver is latched on the rising edge of the ninth SCL input pulse. If the SDA line was high (not ACK), then the data transfer is complete. When the ACK is latched by the slave device, the slave logic is reset (resets SSPSTAT register) and the slave device then monitors for another occurrence of the START bit. If the SDA line was low (ACK), the transmit data must be loaded into the SSPBUF register, which also loads the SSPSR register. Then, pin RC3/SCK/SCL should be enabled by setting bit CKP. Reception When the R/W bit of the address byte is clear and an address match occurs, the R/W bit of the SSPSTAT register is cleared. The received address is loaded into the SSPBUF register. When the address byte overflow condition exists, then a no Acknowledge (ACK) pulse is given. An overflow condition is indicated if either bit BF (SSPSTAT<0>) is set, or bit SSPOV (SSPCON<6>) is set. An SSP interrupt is generated for each data transfer byte. Flag bit SSPIF (PIR1<3>) must be cleared in software. The SSPSTAT register is used to determine the status of the byte. TABLE 9-2: DATA TRANSFER RECEIVED BYTE ACTIONS Status Bits as Data Transfer is Received Generate ACK Pulse Set bit SSPIF (SSP Interrupt occurs if enabled) BF SSPOV SSPSR SSPBUF 0 0 Yes Yes Yes 1 0 No No Yes 1 1 No No Yes 0 1 No No Yes Note 1: Shaded cells show the conditions where the user software did not properly clear the overflow condition. 2002 Microchip Technology Inc. DS39597B-page 49 PIC16F72 I 2C WAVEFORMS FOR RECEPTION (7-BIT ADDRESS) FIGURE 9-6: Receiving Address R/W = 0 Receiving Data Receiving Data ACK ACK ACK A7 A6 A5 A4 A3 A2 A1 D7 D6 D5 D4 D3 D2 D1 D0 D7 D6 D5 D4 D3 D2 D1 D0 SDA SCL 1 S 2 3 4 5 6 7 9 8 1 2 SSPIF (PIR1<3>) 3 4 5 6 7 8 9 1 2 3 5 4 8 7 6 9 Cleared in software BF (SSPSTAT<0>) P Bus Master terminates transfer SSPBUF register is read SSPOV (SSPCON<6>) Bit SSPOV is set because the SSPBUF register is still full. ACK is not sent. I 2C WAVEFORMS FOR TRANSMISSION (7-BIT ADDRESS) FIGURE 9-7: Receiving Address SDA SCL A7 S A6 1 2 Data is sampled SSPIF (PIR1<3>) R/W = 1 A5 A4 A3 A2 A1 3 4 5 6 7 8 9 ACK Transmitting Data ACK D7 1 SCL held low while CPU responds to SSPIF D6 D5 D4 D3 D2 D1 D0 2 3 4 5 6 7 8 9 P Cleared in software BF (SSPSTAT<0>) SSPBUF is written in software From SSP Interrupt Service Routine CKP (SSPCON<4>) Set bit after writing to SSPBUF (the SSPBUF must be written to before the CKP bit can be set) DS39597B-page 50 2002 Microchip Technology Inc. PIC16F72 9.3.2 MASTER MODE OPERATION 9.3.3 Master mode operation is supported in firmware using interrupt generation on the detection of the START and STOP conditions. The STOP (P) and START (S) bits are cleared from a RESET or when the SSP module is disabled. The STOP (P) and START (S) bits will toggle, based on the START and STOP conditions. Control of the I 2C bus may be taken when the P bit is set, or the bus is IDLE and both the S and P bits are clear. MULTI-MASTER MODE OPERATION In Multi-Master mode operation, the interrupt generation on the detection of the START and STOP conditions allows the determination of when the bus is free. The STOP (P) and START (S) bits are cleared from a RESET or when the SSP module is disabled. The STOP (P) and START (S) bits will toggle, based on the START and STOP conditions. Control of the I 2C bus may be taken when bit P (SSPSTAT<4>) is set, or the bus is IDLE and both the S and P bits clear. When the bus is busy, enabling the SSP interrupt will generate the interrupt when the STOP condition occurs. In Master mode operation, the SCL and SDA lines are manipulated in firmware by clearing the corresponding TRISC<4:3> bit(s). The output level is always low, irrespective of the value(s) in PORTC<4:3>. So, when transmitting data, a `1' data bit must have the TRISC<4> bit set (input) and a `0' data bit must have the TRISC<4> bit cleared (output). The same scenario is true for the SCL line with the TRISC<3> bit. In Multi-Master mode operation, the SDA line must be monitored to see if the signal level is the expected output level. This check only needs to be done when a high level is output. If a high level is expected and a low level is present, the device needs to release the SDA and SCL lines (set TRISC<4:3>). There are two stages where this arbitration can be lost: The following events will cause the SSP Interrupt Flag bit, SSPIF, to be set (SSP Interrupt if enabled): * Address Transfer * Data Transfer * START condition * STOP condition * Data transfer byte transmitted/received When the slave logic is enabled, the Slave device continues to receive. If arbitration was lost during the address transfer stage, communication to the device may be in progress. If addressed, an ACK pulse will be generated. If arbitration was lost during the data transfer stage, the device will need to retransfer the data at a later time. Master mode operation can be done with either the Slave mode IDLE (SSPM3:SSPM0 = 1011), or with the Slave mode active. When both Master mode operation and Slave modes are used, the software needs to differentiate the source(s) of the interrupt. For more information on Master mode operation, see AN554 - Software Implementation of I2C Bus Master. For more information on Multi-Master mode operation, see AN578 - Use of the SSP Module in the I2C Multi-Master Environment. REGISTERS ASSOCIATED WITH I2C OPERATION TABLE 9-3: Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR Value on all other RESETS 0Bh, 8Bh, 10Bh,18Bh INTCON GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 0000 000u 0Ch PIR1 -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF -0-- 0000 0000 0000 8Ch PIE1 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE -0-- 0000 0000 0000 13h SSPBUF Synchronous Serial Port Receive Buffer/Transmit Register xxxx xxxx uuuu uuuu 93h SSPADD Synchronous Serial Port (I2C mode) Address Register 0000 0000 0000 0000 14h SSPCON WCOL SSPOV SSPEN CKP 0000 0000 0000 0000 94h SSPSTAT SMP(1) CKE(1) D/A P 0000 0000 0000 0000 87h TRISC 1111 1111 1111 1111 SSPM3 SSPM2 SSPM1 SSPM0 S R/W PORTC Data Direction Register UA BF Legend: x = unknown, u = unchanged, - = unimplemented locations read as `0'. Shaded cells are not used by SSP module in SPI mode. Note 1: Maintain these bits clear in I2C mode. 2002 Microchip Technology Inc. DS39597B-page 51 PIC16F72 NOTES: DS39597B-page 52 2002 Microchip Technology Inc. PIC16F72 10.0 ANALOG-TO-DIGITAL CONVERTER (A/D) MODULE The A/D module has three registers: * A/D Result Register * A/D Control Register 0 * A/D Control Register 1 The analog-to-digital (A/D) converter module has five inputs for the PIC16F72. A device RESET forces all registers to their RESET state. This forces the A/D module to be turned off and any conversion is aborted. The A/D allows conversion of an analog input signal to a corresponding 8-bit digital number. The output of the sample and hold is the input into the converter, which generates the result via successive approximation. The analog reference voltage is software selectable to either the device's positive supply voltage (VDD) or the voltage level on the RA3/AN3/VREF pin. The ADCON0 register, shown in Register 10-1, controls the operation of the A/D module. The ADCON1 register, shown in Register 10-2, configures the functions of the port pins. The port pins can be configured as analog inputs (RA3 can also be a voltage reference) or a digital I/O. The A/D converter has a unique feature of being able to operate while the device is in SLEEP mode. To operate in SLEEP, the A/D conversion clock must be derived from the A/D's internal RC oscillator. REGISTER 10-1: ADRES ADCON0 ADCON1 For more information on use of the A/D Converter, see AN546 - Use of A/D Converter, or refer to the PICmicroTM Mid-Range MCU Family Reference Manual (DS33023). ADCON0: A/D CONTROL REGISTER 0 (ADDRESS 1Fh) R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 U-0 R/W-0 ADCS1 ADCS0 CHS2 CHS1 CHS0 GO/DONE -- ADON bit 7 bit 0 bit 7-6 ADCS<1:0>: A/D Conversion Clock Select bits 00 = FOSC/2 01 = FOSC/8 10 = FOSC/32 11 = FRC (clock derived from the internal A/D module RC oscillator) bit 5-3 CHS<2:0>: Analog Channel Select bits 000 = Channel 0, (RA0/AN0) 001 = Channel 1, (RA1/AN1) 010 = Channel 2, (RA2/AN2) 011 = Channel 3, (RA3/AN3) 100 = Channel 4, (RA5/AN4) bit 2 GO/DONE: A/D Conversion Status bit If ADON = 1: 1 = A/D conversion in progress (setting this bit starts the A/D conversion) 0 = A/D conversion not in progress (this bit is automatically cleared by hardware when the A/D conversion is complete) bit 1 Unimplemented: Read as `0' bit 0 ADON: A/D On bit 1 = A/D converter module is operating 0 = A/D converter module is shut-off and consumes no operating current Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared 2002 Microchip Technology Inc. x = Bit is unknown DS39597B-page 53 PIC16F72 REGISTER 10-2: ADCON1: A/D CONTROL REGISTER 1 (ADDRESS 9Fh) U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 -- -- -- -- -- PCFG2 PCFG1 PCFG0 bit 7 bit 0 bit 7-3 Unimplemented: Read as `0' bit 2-0 PCFG<2:0>: A/D Port Configuration Control bits PCFG2:PCFG0 RA0 RA1 RA2 RA5 RA3 VREF 000 001 010 011 100 101 11x A A A A A A D A A A A A A D A A A A D D D A A A A D D D A VREF A VREF A VREF D VDD RA3 VDD RA3 VDD RA3 VDD A = Analog input D = Digital I/O Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' - n = Value at POR `1' = Bit is set `0' = Bit is cleared The ADRES register contains the result of the A/D conversion. When the A/D conversion is complete, the result is loaded into the ADRES register, the GO/DONE bit (ADCON0<2>) is cleared, and A/D interrupt flag bit ADIF is set. The block diagram of the A/D module is shown in Figure 10-1. The following steps should be followed for doing an A/D conversion: 1. The value in the ADRES register is not modified for a Power-on Reset. The ADRES register will contain unknown data after a Power-on Reset. After the A/D module has been configured as desired, the selected channel must be acquired before the conversion is started. The analog input channels must have their corresponding TRIS bits selected as an input. To determine acquisition time, see Section 10.1. After this acquisition time has elapsed, the A/D conversion can be started. x = Bit is unknown 2. 3. 4. 5. Configure the A/D module: * Configure analog pins/voltage reference and digital I/O (ADCON1) * Select A/D input channel (ADCON0) * Select A/D conversion clock (ADCON0) * Turn on A/D module (ADCON0) Configure A/D interrupt (if desired): * Clear ADIF bit * Set ADIE bit * Set GIE bit Wait the required acquisition time. Start conversion: * Set GO/DONE bit (ADCON0) Wait for A/D conversion to complete, by either: * Polling for the GO/DONE bit to be cleared OR 6. 7. DS39597B-page 54 * Waiting for the A/D interrupt Read A/D Result register (ADRES), clear bit ADIF if required. For next conversion, go to step 1 or step 2 as required. The A/D conversion time per bit is defined as TAD. A minimum wait of 2 TAD is required before the next acquisition starts. 2002 Microchip Technology Inc. PIC16F72 FIGURE 10-1: A/D BLOCK DIAGRAM CHS2:CHS0 100 RA5/AN4 VAIN 011 (Input Voltage) RA3/AN3/VREF 010 RA2/AN2 A/D Converter 001 RA1/AN1 000 VDD RA0/AN0 000 or 010 or 100 VREF (Reference Voltage) 001 or 011 or 101 PCFG2:PCFG0 FIGURE 10-2: ANALOG INPUT MODEL VDD Rs ANx VA CPIN 5 pF Sampling Switch VT = 0.6 V VT = 0.6 V RIC 1 k SS RSS CHOLD = DAC capacitance = 51.2 pF I leakage 500 nA VSS Legend: CPIN = input capacitance = threshold voltage VT I leakage = leakage current at the pin due to various junctions = interconnect resistance RIC SS = sampling switch CHOLD = sample/hold capacitance (from DAC) 2002 Microchip Technology Inc. 6V 5V VDD 4V 3V 2V 5 6 7 8 9 10 11 Sampling Switch ( k ) DS39597B-page 55 PIC16F72 10.1 A/D Acquisition Requirements 10.3 For the A/D converter to meet its specified accuracy, the charge holding capacitor (CHOLD) must be allowed to fully charge to the input channel voltage level. The analog input model is shown in Figure 10-2. The source impedance (RS) and the internal sampling switch (RSS) impedance directly affect the time required to charge the capacitor CHOLD. The sampling switch (RSS) impedance varies over the device voltage (VDD). The source impedance affects the offset voltage at the analog input (due to pin leakage current). The ADCON1, and TRISA registers control the operation of the A/D port pins. The port pins that are desired as analog inputs must have their corresponding TRIS bits set (input). If the TRIS bit is cleared (output), the digital output level (VOH or VOL) will be converted. The A/D operation is independent of the state of the CHS<2:0> bits and the TRIS bits. Note 1: When reading the port register, all pins configured as analog input channels will read as cleared (a low level). Pins configured as digital inputs, will convert an analog input. Analog levels on a digitally configured input will not affect the conversion accuracy. The maximum recommended impedance for analog sources is 10 k. After the analog input channel is selected (changed), this acquisition must be done before the conversion can be started. To calculate the minimum acquisition time, TACQ, see the PICmicroTM Mid-Range MCU Reference Manual, (DS33023). In general, however, given a max of 10 k and at a temperature of 100C, TACQ will be no more than 16 s. 10.2 2: Analog levels on any pin that is defined as a digital input (including the AN4:AN0 pins), may cause the input buffer to consume current out of the device specification. Selecting the A/D Conversion Clock 10.4 The A/D conversion time per bit is defined as TAD. The A/D conversion requires 9.0 TAD per 8-bit conversion. The source of the A/D conversion clock is software selectable. The four possible options for TAD are: * * * * Note: A/D Conversions The GO/DONE bit should NOT be set in the same instruction that turns on the A/D. Clearing the GO/DONE bit during a conversion will abort the current conversion. The ADRES register will NOT be updated with the partially completed A/D conversion sample. That is, the ADRES register will continue to contain the value of the last completed conversion (or the last value written to the ADRES register). After the A/D conversion is aborted, a 2 TAD wait is required before the next acquisition is started. After this 2 TAD wait, an acquisition is automatically started on the selected channel. The GO/DONE bit can then be set to start the conversion. 2 TOSC 8 TOSC 32 TOSC Internal RC oscillator (2 - 6 s) For correct A/D conversions, the A/D conversion clock (TAD) must be selected to ensure a minimum TAD time as small as possible, but no less than 1.6 s and not greater than 6.4 s. Table 10-1 shows the resultant TAD times derived from the device operating frequencies and the A/D clock source selected. TABLE 10-1: Configuring Analog Port Pins TAD vs. MAXIMUM DEVICE OPERATING FREQUENCIES (STANDARD DEVICES (C)) AD Clock Source (TAD) Maximum Device Frequency Operation ADCS<1:0> Max. 2 TOSC 00 1.25 MHz 8 TOSC 01 5 MHz 32 TOSC 10 20 MHz RC(1, 2) 11 (Note 1) Note 1: The RC source has a typical TAD time of 4 s, but can vary between 2-6 s. 2: When the device frequencies are greater than 1 MHz, the RC A/D conversion clock source is only recommended for SLEEP operation. DS39597B-page 56 2002 Microchip Technology Inc. PIC16F72 10.5 A/D Operation During SLEEP 10.6 The A/D module can operate during SLEEP mode. This requires that the A/D clock source be set to RC (ADCS1:ADCS0 = 11). When the RC clock source is selected, the A/D module waits one instruction cycle before starting the conversion. This allows the SLEEP instruction to be executed, which eliminates all digital switching noise from the conversion. When the conversion is completed, the GO/DONE bit will be cleared, and the result loaded into the ADRES register. If the A/D interrupt is enabled, the device will wake-up from SLEEP. If the A/D interrupt is not enabled, the A/D module will then be turned off, although the ADON bit will remain set. A device RESET forces all registers to their RESET state. The A/D module is disabled and any conversion in progress is aborted. All A/D input pins are configured as analog inputs. The ADRES register will contain unknown data after a Power-on Reset. 10.7 Turning off the A/D places the A/D module in its lowest current consumption state. For the A/D module to operate in SLEEP, the A/D clock source must be set to RC (ADCS1:ADCS0 = 11). To perform an A/D conversion in SLEEP, ensure the SLEEP instruction immediately follows the instruction that sets the GO/DONE bit. TABLE 10-2: Use of the CCP Trigger An A/D conversion can be started by the "special event trigger" of the CCP1 module. This requires that the CCP1M3:CCP1M0 bits (CCP1CON<3:0>) be programmed as 1011 and that the A/D module is enabled (ADON bit is set). When the trigger occurs, the GO/DONE bit will be set, starting the A/D conversion, and the Timer1 counter will be reset to zero. Timer1 is reset to automatically repeat the A/D acquisition period with minimal software overhead (moving the ADRES to the desired location). The appropriate analog input channel must be selected and the minimum acquisition done before the "special event trigger" sets the GO/DONE bit (starts a conversion). When the A/D clock source is another clock option (not RC), a SLEEP instruction will cause the present conversion to be aborted and the A/D module to be turned off, though the ADON bit will remain set. Note: Effects of a RESET If the A/D module is not enabled (ADON is cleared), then the "special event trigger" will be ignored by the A/D module, but will still reset the Timer1 counter. REGISTERS/BITS ASSOCIATED WITH A/D Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR Value on all other RESETS INTCON 0Bh,8Bh 10Bh,18Bh GIE PEIE TMR0IE INTE RBIE TMR0IF INTF RBIF 0000 000x 0000 000u Address 0Ch PIR1 -- ADIF -- -- SSPIF CCP1IF TMR2IF TMR1IF -0-- 0000 -0-- 0000 8Ch PIE1 -- ADIE -- -- SSPIE CCP1IE TMR2IE TMR1IE -0-- 0000 -0-- 0000 1Eh ADRES xxxx xxxx uuuu uuuu 1Fh ADCON0 ADCS1 ADCS0 9Fh ADCON1 A/D Result Register -- -- 05h PORTA -- -- 85h TRISA -- -- CHS2 CHS1 -- -- RA5 RA4 CHS0 GO/DONE -- RA3 PCFG2 RA2 PORTA Data Direction Register -- ADON 0000 00-0 0000 00-0 PCFG1 PCFG0 ---- -000 ---- -000 RA0 --0x 0000 --0u 0000 --11 1111 --11 1111 RA1 Legend: x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used for A/D conversion. 2002 Microchip Technology Inc. DS39597B-page 57 PIC16F72 NOTES: DS39597B-page 58 2002 Microchip Technology Inc. PIC16F72 11.0 SPECIAL FEATURES OF THE CPU These devices have a host of features intended to maximize system reliability, minimize cost through elimination of external components, provide power saving Operating modes and offer code protection: * Oscillator Selection * RESET - Power-on Reset (POR) - Power-up Timer (PWRT) - Oscillator Start-up Timer (OST) - Brown-out Reset (BOR) * Interrupts * Watchdog Timer (WDT) * SLEEP * Code Protection * ID Locations * In-Circuit Serial Programming These devices have a Watchdog Timer, which can be enabled or disabled using a configuration bit. It runs off its own RC oscillator for added reliability. SLEEP mode is designed to offer a very low current Power-down mode. The user can wake-up from SLEEP through external RESET, Watchdog Timer Wake-up, or through an interrupt. Several oscillator options are also made available to allow the part to fit the application. The RC oscillator option saves system cost while the LP crystal option saves power. Configuration bits are used to select the desired oscillator mode. Additional information on special features is available in the PICmicroTM Mid-Range Reference Manual (DS33023). 11.1 Configuration Bits The configuration bits can be programmed (read as `0'), or left unprogrammed (read as `1'), to select various device configurations. These bits are mapped in program memory location 2007h. The user will note that address 2007h is beyond the user program memory space, which can be accessed only during programming. There are two timers that offer necessary delays on power-up. One is the Oscillator Start-up Timer (OST), intended to keep the chip in RESET until the crystal oscillator is stable. The other is the Power-up Timer (PWRT), which provides a fixed delay of 72 ms (nominal) on power-up only. It is designed to keep the part in RESET while the power supply stabilizes, and is enabled or disabled using a configuration bit. With these two timers on-chip, most applications need no external RESET circuitry. 2002 Microchip Technology Inc. DS39597B-page 59 PIC16F72 REGISTER 11-1: CONFIGURATION WORD (ADDRESS 2007h)(1) U-1 U-1 U-1 U-1 U-1 U-1 U-1 u-1 U-1 u-1 -- -- -- -- -- -- -- BOREN -- CP u-1 u-1 u-1 u-1 PWRTEN WDTEN F0SC1 F0SC0 bit13 bit0 bit 13-7 Unimplemented: Read as `1' bit 6 BOREN: Brown-out Reset Enable bit(2) 1 = BOR enabled 0 = BOR disabled bit 5 Unimplemented: Read as `1' bit 4 CP: FLASH Program Memory Code Protection bit 1 = Code protection off 0 = All memory locations code protected bit 3 PWRTEN: Power-up Timer Enable bit 1 = PWRT disabled 0 = PWRT enabled bit 2 WDTEN: Watchdog Timer Enable bit 1 = WDT enabled 0 = WDT disabled bit 1-0 FOSC1:FOSC0: Oscillator Selection bits 11 = RC oscillator 10 = HS oscillator 01 = XT oscillator 00 = LP oscillator Note 1: The erased (unprogrammed) value of the configuration word is 3FFFh. 2: Enabling Brown-out Reset automatically enables Power-up Timer (PWRT), regardless of the value of bit PWRTEN. Ensure the Power-up Timer is enabled any time Brown-out Reset is enabled. Legend: R = Readable bit P = Programmable bit - n = Value when device is unprogrammed DS39597B-page 60 U = Unimplemented bit, read as `1' u = Unchanged from programmed state 2002 Microchip Technology Inc. PIC16F72 11.2 FIGURE 11-2: Oscillator Configurations 11.2.1 OSCILLATOR TYPES The PIC16F72 can be operated in four different Oscillator modes. The user can program two configuration bits (FOSC1 and FOSC0) to select one of these four modes: * * * * LP XT HS RC EXTERNAL CLOCK INPUT OPERATION (HS OSC CONFIGURATION) Low Power Crystal Crystal/Resonator High Speed Crystal/Resonator Resistor/Capacitor 11.2.2 OSC1 Clock from Ext. System PIC16F72 (HS Mode) Open CRYSTAL OSCILLATOR/CERAMIC RESONATORS In XT, LP or HS modes, a crystal or ceramic resonator is connected to the OSC1/CLKI and OSC2/CLKO pins to establish oscillation (Figure 11-1). The PIC16F72 oscillator design requires the use of a parallel cut crystal. Use of a series cut crystal may give a frequency out of the crystal manufacturers specifications. When in HS mode, the device can accept an external clock source to drive the OSC1/CLKI pin (Figure 11-2). See Figure 14-1 or Figure 14-2 (depending on the part number and VDD range) for valid external clock frequencies. TABLE 11-1: OSC2 CERAMIC RESONATORS (FOR DESIGN GUIDANCE ONLY) Typical Capacitor Values Used: Mode Freq OSC1 OSC2 XT 455 kHz 2.0 MHz 4.0 MHz 56 pF 47 pF 33 pF 56 pF 47 pF 33 pF HS 8.0 MHz 16.0 MHz 27 pF 22 pF 27 pF 22 pF Capacitor values are for design guidance only. FIGURE 11-1: C1(1) CRYSTAL/CERAMIC RESONATOR OPERATION (HS, XT OR LP OSC CONFIGURATION) OSC1 XTAL To internal logic RF(3) OSC2 RS(2) C2(1) These capacitors were tested with the resonators listed below for basic start-up and operation. These values were not optimized. Different capacitor values may be required to produce acceptable oscillator operation. The user should test the performance of the oscillator over the expected VDD and temperature range for the application. See the notes at the bottom of page 62 for additional information. SLEEP PIC16F72 Note 1: See Table 11-1 and Table 11-2 for typical values of C1 and C2. 2: A series resistor (RS) may be required for AT strip cut crystals. 3: RF varies with the crystal chosen. 2002 Microchip Technology Inc. DS39597B-page 61 PIC16F72 TABLE 11-2: Osc Type LP XT HS CAPACITOR SELECTION FOR CRYSTAL OSCILLATOR (FOR DESIGN GUIDANCE ONLY) Crystal Freq Typical Capacitor Values Tested: C1 C2 32 kHz 33 pF 33 pF 200 kHz 15 pF 15 pF 200 kHz 56 pF 56 pF 1 MHz 15 pF 15 pF 4 MHz 15 pF 15 pF 4 MHz 15 pF 15 pF 8 MHz 15 pF 15 pF 20 MHz 15 pF 15 pF 11.2.3 For timing insensitive applications, the "RC" device option offers additional cost savings. The RC oscillator frequency is a function of the supply voltage, the resistor (REXT) and capacitor (CEXT) values, and the operating temperature. In addition to this, the oscillator frequency will vary from unit to unit due to normal process parameter variation. Furthermore, the difference in lead frame capacitance between package types will also affect the oscillation frequency, especially for low CEXT values. The user also needs to take into account variation due to tolerance of external R and C components used. Figure 11-3 shows how the R/C combination is connected to the PIC16F72. FIGURE 11-3: These capacitors were tested with the crystals listed below for basic start-up and operation. These values were not optimized. REXT CEXT 4: Always verify oscillator performance over the VDD and temperature range that is expected for the application. PIC16F72 VSS FOSC/4 See the notes following this table for additional information. 3: Rs may be required in HS mode, as well as XT mode, to avoid overdriving crystals with low drive level specification. Internal Clock OSC1 Different capacitor values may be required to produce acceptable oscillator operation. The user should test the performance of the oscillator over the expected VDD and temperature range for the application. 2: Since each resonator/crystal has its own characteristics, the user should consult the resonator/crystal manufacturer for appropriate values of external components. RC OSCILLATOR MODE VDD Capacitor values are for design guidance only. Note 1: Higher capacitance increases the stability of oscillator, but also increases the start-up time. RC OSCILLATOR Recommended values: 11.3 OSC2/CLKO 3 k REXT 100 k CEXT > 20 pF RESET The PIC16F72 differentiates between various kinds of RESET: * * * * * * Power-on Reset (POR) MCLR Reset during normal operation MCLR Reset during SLEEP WDT Reset (during normal operation) WDT Wake-up (during SLEEP) Brown-out Reset (BOR) Some registers are not affected in any RESET condition. Their status is unknown on POR and unchanged in any other RESET. Most other registers are reset to a "RESET state" on Power-on Reset (POR), on the MCLR and WDT Reset, on MCLR Reset during SLEEP, and Brown-out Reset (BOR). They are not affected by a WDT Wake-up, which is viewed as the resumption of normal operation. The TO and PD bits are set or cleared differently in different RESET situations, as indicated in Table 11-4. These bits are used in software to determine the nature of the RESET. See Table 11-6 for a full description of RESET states of all registers. A simplified block diagram of the on-chip RESET circuit is shown in Figure 11-4. DS39597B-page 62 2002 Microchip Technology Inc. PIC16F72 FIGURE 11-4: SIMPLIFIED BLOCK DIAGRAM OF ON-CHIP RESET CIRCUIT External RESET MCLR SLEEP WDT Module WDT Time-out Reset VDD Rise Detect Power-on Reset VDD Brown-out Reset S BOREN OST/PWRT OST Chip_Reset 10-bit Ripple Counter R Q OSC1 (1) On-chip RC OSC PWRT 10-bit Ripple Counter Enable PWRT Enable OST Note 11.4 1: This is a separate oscillator from the RC oscillator of the CLKI pin. MCLR PIC16F72 device has a noise filter in the MCLR Reset path. The filter will detect and ignore small pulses. It should be noted that a WDT Reset does not drive MCLR pin low. The behavior of the ESD protection on the MCLR pin has been altered from previous devices of this family. Voltages applied to the pin that exceed its specification can result in both MCLR and excessive current beyond the device specification during the ESD event. For this reason, Microchip recommends that the MCLR pin no longer be tied directly to VDD. The use of an RC network, as shown in Figure 11-5, is suggested. 2002 Microchip Technology Inc. FIGURE 11-5: RECOMMENDED MCLR CIRCUIT VDD PIC16F72 R1 1 k (or greater) MCLR C1 0.1 F (optional, not critical) DS39597B-page 63 PIC16F72 11.5 Power-on Reset (POR) A Power-on Reset pulse is generated on-chip when VDD rise is detected (in the range of 1.2V - 1.7V). To take advantage of the POR, tie the MCLR pin to VDD, as described in Section 11.4. A maximum rise time for VDD is specified. See Section 14.0, Electrical Characteristics for details. When the device starts normal operation (exits the RESET condition), device operating parameters (voltage, frequency, temperature,...) must be met to ensure operation. If these conditions are not met, the device must be held in RESET until the operating conditions are met. For more information, see Application Note, AN607- Power-up Trouble Shooting (DS00607). 11.6 Power-up Timer (PWRT) The Power-up Timer provides a fixed 72 ms nominal time-out on power-up only from the POR. The Powerup Timer operates on an internal RC oscillator. The chip is kept in RESET as long as the PWRT is active. The PWRT's time delay allows VDD to rise to an acceptable level. A configuration bit is provided to enable/ disable the PWRT. The power-up time delay will vary from chip to chip due to VDD, temperature and process variation. See DC parameters for details (TPWRT, parameter #33). 11.7 Oscillator Start-up Timer (OST) 11.9 Time-out Sequence On power-up, the time-out sequence is as follows: the PWRT delay starts (if enabled) when a POR occurs. Then, OST starts counting 1024 oscillator cycles when PWRT ends (LP, XT, HS). When the OST ends, the device comes out of RESET. If MCLR is kept low long enough, all delays will expire. Bringing MCLR high will begin execution immediately. This is useful for testing purposes or to synchronize more than one PIC16F72 device operating in parallel. Table 11-5 shows the RESET conditions for the STATUS, PCON and PC registers, while Table 11-6 shows the RESET conditions for all the registers. 11.10 Power Control/Status Register (PCON) The Power Control/Status Register, PCON, has two bits to indicate the type of RESET that last occurred. Bit0 is Brown-out Reset Status bit, BOR. Bit BOR is unknown on a Power-on Reset. It must then be set by the user and checked on subsequent RESETS to see if bit BOR cleared, indicating a Brown-out Reset occurred. When the Brown-out Reset is disabled, the state of the BOR bit is unpredictable. Bit1 is POR (Power-on Reset Status bit). It is cleared on a Power-on Reset and unaffected otherwise. The user must set this bit following a Power-on Reset. The Oscillator Start-up Timer (OST) provides 1024 oscillator cycles (from OSC1 input) delay after the PWRT delay is over (if enabled). This helps to ensure that the crystal oscillator or resonator has started and stabilized. The OST time-out is invoked only for XT, LP and HS modes and only on Power-on Reset or wake-up from SLEEP. 11.8 Brown-out Reset (BOR) The configuration bit, BOREN, can enable or disable the Brown-out Reset circuit. If VDD falls below VBOR (parameter D005, about 4V) for longer than TBOR (parameter #35, about 100 s), the brown-out situation will reset the device. If VDD falls below VBOR for less than TBOR, a RESET may not occur. Once the brown-out occurs, the device will remain in Brown-out Reset until VDD rises above VBOR. The Power-up Timer then keeps the device in RESET for TPWRT (parameter #33, about 72 ms). If VDD should fall below VBOR during TPWRT, the Brown-out Reset process will restart when VDD rises above VBOR, with the Power-up Timer Reset. The Power-up Timer is always enabled when the Brown-out Reset circuit is enabled, regardless of the state of the PWRT configuration bit. DS39597B-page 64 2002 Microchip Technology Inc. PIC16F72 TABLE 11-3: TIME-OUT IN VARIOUS SITUATIONS Power-up Oscillator Configuration Brown-out Wake-up from SLEEP PWRTEN = 0 PWRTEN = 1 XT, HS, LP 72 ms + 1024 TOSC 1024 TOSC 72 ms + 1024 TOSC 1024 TOSC RC 72 ms -- 72 ms -- TABLE 11-4: STATUS BITS AND THEIR SIGNIFICANCE BOR TO PD POR (PCON<1>) (PCON<0>) (STATUS<4>) (STATUS<3>) Significance 0 x 1 1 Power-on Reset 0 x 0 x Illegal, TO is set on POR 0 x x 0 Illegal, PD is set on POR u 0 1 1 Brown-out Reset u u 0 1 WDT Reset u u 0 0 WDT Wake-up u u u u MCLR Reset during normal operation u u 1 0 MCLR Reset during SLEEP or interrupt wake-up from SLEEP TABLE 11-5: RESET CONDITION FOR SPECIAL REGISTERS Program Counter STATUS Register PCON Register Power-on Reset 000h 0001 1xxx ---- --0x MCLR Reset during normal operation 000h 000u uuuu ---- --uu MCLR Reset during SLEEP 000h 0001 0uuu ---- --uu WDT Reset 000h 0000 1uuu ---- --uu PC + 1 uuu0 0uuu ---- --uu 000h 0001 1uuu ---- --u0 uuu1 0uuu ---- --uu Condition WDT Wake-up Brown-out Reset Interrupt Wake-up from SLEEP (1) PC + 1 Legend: u = unchanged, x = unknown, - = unimplemented bit, read as '0'. Note 1: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector (0004h). 2002 Microchip Technology Inc. DS39597B-page 65 PIC16F72 TABLE 11-6: Register W INITIALIZATION CONDITIONS FOR ALL REGISTERS Power-on Reset, Brown-out Reset xxxx xxxx MCLR Reset, WDT Reset uuuu uuuu INDF N/A N/A TMR0 xxxx xxxx uuuu uuuu 0000h 0000h PCL Wake-up via WDT or Interrupt uuuu uuuu N/A uuuu uuuu PC + 1(2) (3) uuuq quuu(3) STATUS 0001 1xxx 000q quuu FSR xxxx xxxx uuuu uuuu uuuu uuuu PORTA --0x 0000 --0u 0000 --uu uuuu PORTB xxxx xxxx uuuu uuuu uuuu uuuu PORTC xxxx xxxx uuuu uuuu uuuu uuuu PCLATH ---0 0000 ---0 0000 ---u uuuu INTCON 0000 000x 0000 000u uuuu uuuu(1) PIR1 -0-- 0000 -0-- 0000 -u-- uuuu(1) TMR1L xxxx xxxx uuuu uuuu uuuu uuuu TMR1H xxxx xxxx uuuu uuuu uuuu uuuu T1CON --00 0000 --uu uuuu --uu uuuu TMR2 0000 0000 0000 0000 uuuu uuuu T2CON -000 0000 -000 0000 -uuu uuuu SSPBUF xxxx xxxx uuuu uuuu uuuu uuuu SSPCON 0000 0000 0000 0000 uuuu uuuu CCPR1L xxxx xxxx uuuu uuuu uuuu uuuu CCPR1H xxxx xxxx uuuu uuuu uuuu uuuu CCP1CON --00 0000 --00 0000 --uu uuuu ADRES xxxx xxxx uuuu uuuu uuuu uuuu ADCON0 0000 00-0 0000 00-0 uuuu uu-u OPTION 1111 1111 1111 1111 uuuu uuuu TRISA --11 1111 --11 1111 --uu uuuu TRISB 1111 1111 1111 1111 uuuu uuuu TRISC 1111 1111 1111 1111 uuuu uuuu PIE1 -0-- 0000 -0-- 0000 -u-- uuuu PCON ---- --qq ---- --uu ---- --uu PR2 1111 1111 1111 1111 1111 1111 SSPADD 0000 0000 0000 0000 uuuu uuuu SSPSTAT --00 0000 --00 0000 --uu uuuu ADCON1 ---- -000 ---- -000 ---- -uuu PMDATL 0--- 0000 0--- 0000 u--- uuuu PMADRL xxxx xxxx uuuu uuuu uuuu uuuu PMDATH xxxx xxxx uuuu uuuu uuuu uuuu PMADRH xxxx xxxx uuuu uuuu uuuu uuuu PMCON1 1--- ---0 1--- ---0 1--- ---u Legend: u = unchanged, x = unknown, - = unimplemented bit, read as '0', q = value depends on condition, r = reserved, maintain clear. Note 1: One or more bits in INTCON, PIR1 will be affected (to cause wake-up). 2: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector (0004h). 3: See Table 11-5 for RESET value for specific condition. DS39597B-page 66 2002 Microchip Technology Inc. PIC16F72 FIGURE 11-6: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD THROUGH PULL-UP RESISTOR) VDD MCLR INTERNAL POR TPWRT PWRT TIME-OUT TOST OST TIME-OUT INTERNAL RESET FIGURE 11-7: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD THROUGH RC NETWORK): CASE 1 VDD MCLR INTERNAL POR TPWRT PWRT TIME-OUT TOST OST TIME-OUT INTERNAL RESET FIGURE 11-8: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD THROUGH RC NETWORK): CASE 2 VDD MCLR INTERNAL POR TPWRT PWRT TIME-OUT TOST OST TIME-OUT INTERNAL RESET 2002 Microchip Technology Inc. DS39597B-page 67 PIC16F72 FIGURE 11-9: SLOW RISE TIME (MCLR TIED TO VDD THROUGH RC NETWORK) 5V VDD 1V 0V MCLR INTERNAL POR TPWRT PWRT TIME-OUT TOST OST TIME-OUT INTERNAL RESET 11.11 Interrupts The RB0/INT pin interrupt, the RB port change interrupt and the TMR0 overflow interrupt flags are contained in the INTCON register. The PIC16F72 has up to eight sources of interrupt. The interrupt control register (INTCON) records individual interrupt requests in flag bits. It also has individual and global interrupt enable bits. Note: The peripheral interrupt flags are contained in the Special Function Register, PIR1. The corresponding interrupt enable bits are contained in Special Function Register, PIE1, and the peripheral interrupt enable bit is contained in Special Function Register INTCON. Individual interrupt flag bits are set, regardless of the status of their corresponding mask bit, or the GIE bit. When an interrupt is serviced, the GIE bit is cleared to disable any further interrupt, the return address is pushed onto the stack, and the PC is loaded with 0004h. Once in the Interrupt Service Routine, the source(s) of the interrupt can be determined by polling the interrupt flag bits. The interrupt flag bit(s) must be cleared in software before re-enabling interrupts to avoid recursive interrupts. A global interrupt enable bit, GIE (INTCON<7>) enables (if set) all unmasked interrupts, or disables (if cleared) all interrupts. When bit GIE is enabled, and an interrupt's flag bit and mask bit are set, the interrupt will vector immediately. Individual interrupts can be disabled through their corresponding enable bits in various registers. Individual interrupt bits are set, regardless of the status of the GIE bit. The GIE bit is cleared on RESET. For external interrupt events, such as the INT pin or PORTB change interrupt, the interrupt latency will be three or four instruction cycles. The exact latency depends when the interrupt event occurs, relative to the current Q cycle. The latency is the same for one or two cycle instructions. Individual interrupt flag bits are set, regardless of the status of their corresponding mask bit, PEIE bit, or the GIE bit. The "return from interrupt" instruction, RETFIE, exits the interrupt routine, as well as sets the GIE bit, which re-enables interrupts. FIGURE 11-10: INTERRUPT LOGIC TMR0IF TMR0IE INTF INTE ADIF ADIE SSPIF SSPIE CCP1IF CCP1IE TMR1IF TMR1IE Wake-up (If in SLEEP mode) Interrupt to CPU RBIF RBIE PEIE GIE TMR2IF TMR2IE DS39597B-page 68 2002 Microchip Technology Inc. PIC16F72 11.11.1 INT INTERRUPT 11.11.3 External interrupt on the RB0/INT pin is edge triggered, either rising, if bit INTEDG (OPTION<6>) is set, or falling, if the INTEDG bit is clear. When a valid edge appears on the RB0/INT pin, flag bit INTF (INTCON<1>) is set. This interrupt can be disabled by clearing enable bit INTE (INTCON<4>). Flag bit INTF must be cleared in software in the Interrupt Service Routine before re-enabling this interrupt. The INT interrupt can wake-up the processor from SLEEP, if bit INTE was set prior to going into SLEEP. The status of global interrupt enable bit GIE decides whether or not the processor branches to the interrupt vector following wake-up. See Section 11.14 for details on SLEEP mode. 11.11.2 TMR0 INTERRUPT An overflow (FFh 00h) in the TMR0 register will set flag bit TMR0IF (INTCON<2>). The interrupt can be enabled/disabled by setting/clearing enable bit TMR0IE (INTCON<5>) (see Section 5.0). EXAMPLE 11-1: PORTB INTCON CHANGE An input change on PORTB<7:4> sets flag bit RBIF (INTCON<0>). The interrupt can be enabled/disabled by setting/clearing enable bit RBIE (INTCON<4>) (see Section 3.2). 11.12 Context Saving During Interrupts During an interrupt, only the return PC value is saved on the stack. Typically, users may wish to save key registers during an interrupt (i.e., W, STATUS registers). This will have to be implemented in software, as shown in Example 11-1. For the PIC16F72 device, the register W_TEMP must be defined in both banks 0 and 1 and must be defined at the same offset from the bank base address (i.e., if W_TEMP is defined at 20h in bank 0, it must also be defined at A0h in bank 1). The register STATUS_TEMP is only defined in bank 0. SAVING STATUS, W AND PCLATH REGISTERS IN RAM MOVWF SWAPF CLRF MOVWF : :(ISR) : SWAPF W_TEMP STATUS,W STATUS STATUS_TEMP MOVWF SWAPF SWAPF STATUS W_TEMP,F W_TEMP,W ;Copy ;Swap ;bank ;Save W to TEMP register status to be saved into W 0, regardless of current bank, Clears IRP,RP1,RP0 status to bank zero STATUS_TEMP register ;Insert user code here STATUS_TEMP,W 2002 Microchip Technology Inc. ;Swap STATUS_TEMP register into W ;(sets bank to original state) ;Move W into STATUS register ;Swap W_TEMP ;Swap W_TEMP into W DS39597B-page 69 PIC16F72 11.13 Watchdog Timer (WDT) The Watchdog Timer is a free running, on-chip RC oscillator that does not require any external components. This RC oscillator is separate from the RC oscillator of the OSC1/CLKI pin. That means that the WDT will run, even if the clock on the OSC1/CLKI and OSC2/ CLKO pins of the device has been stopped, for example, by execution of a SLEEP instruction. WDT time-out period values may be found in the Electrical Specifications section under parameter #31. Values for the WDT prescaler (actually a postscaler, but shared with the Timer0 prescaler) may be assigned using the OPTION register. Note 1: The CLRWDT and SLEEP instructions clear the WDT and the postscaler, if assigned to the WDT, and prevent it from timing out and generating a device RESET condition. During normal operation, a WDT time-out generates a device RESET (Watchdog Timer Reset). If the device is in SLEEP mode, a WDT time-out causes the device to wake-up and continue with normal operation (Watchdog Timer Wake-up). The TO bit in the STATUS register will be cleared upon a Watchdog Timer time-out. 2: When a CLRWDT instruction is executed and the prescaler is assigned to the WDT, the prescaler count will be cleared, but the prescaler assignment is not changed. The WDT can be permanently disabled by clearing configuration bit WDTEN (see Section 11.1). FIGURE 11-11: WATCHDOG TIMER BLOCK DIAGRAM From TMR0 Clock Source (Figure 5-1) 0 WDT Timer 1 Postscaler M U X 8 8 - to - 1 MUX PS2:PS0 PSA WDT Enable Bit To TMR0 (Figure 5-1) 0 1 MUX PSA WDT Time-out Note: PSA and PS2:PS0 are bits in the OPTION register. TABLE 11-7: Address SUMMARY OF WATCHDOG TIMER REGISTERS Name 2007h Config. bits 81h,181h OPTION Bit 7 Bit 6 Bit 5 Bit 4 (1) BOREN(1) -- CP RBPU INTEDG T0CS T0SE Bit 3 Bit 2 PWRTEN(1) WDTEN PSA PS2 Bit 1 Bit 0 FOSC1 FOSC0 PS1 PS0 Legend: Shaded cells are not used by the Watchdog Timer. Note 1: See Register 11-1 for operation of these bits. DS39597B-page 70 2002 Microchip Technology Inc. PIC16F72 11.14 Power-down Mode (SLEEP) Power-down mode is entered by executing a SLEEP instruction. If enabled, the Watchdog Timer will be cleared but keeps running, the PD bit (STATUS<3>) is cleared, the TO (STATUS<4>) bit is set, and the oscillator driver is turned off. The I/O ports maintain the status they had before the SLEEP instruction was executed (driving high, low, or hi-impedance). For lowest current consumption in this mode, place all I/O pins at either VDD or VSS, ensure no external circuitry is drawing current from the I/O pin, power-down the A/D and disable external clocks. Pull all I/O pins that are hi-impedance inputs, high or low externally, to avoid switching currents caused by floating inputs. The T0CKI input should also be at VDD or VSS for lowest current consumption. The contribution from on-chip pull-ups on PORTB should also be considered. The MCLR pin must be at a logic high level (VIHMC). 11.14.1 WAKE-UP FROM SLEEP The device can wake-up from SLEEP through one of the following events: 1. 2. 3. External RESET input on MCLR pin. Watchdog Timer wake-up (if WDT was enabled). Interrupt from INT pin, RB port change or a peripheral interrupt. External MCLR Reset will cause a device RESET. All other events are considered a continuation of program execution and cause a "wake-up". The TO and PD bits in the STATUS register can be used to determine the cause of the device RESET. The PD bit, which is set on power-up, is cleared when SLEEP is invoked. The TO bit is cleared if a WDT time-out occurred and caused wake-up. The following peripheral interrupts can wake the device from SLEEP: 1. 2. 3. 4. 5. 6. Other peripherals cannot generate interrupts since during SLEEP, no on-chip clocks are present. When the SLEEP instruction is being executed, the next instruction (PC + 1) is pre-fetched. For the device to wake-up through an interrupt event, the corresponding interrupt enable bit must be set (enabled). Wake-up occurs regardless of the state of the GIE bit. If the GIE bit is clear (disabled), the device continues execution at the instruction after the SLEEP instruction. If the GIE bit is set (enabled), the device executes the instruction after the SLEEP instruction and then branches to the interrupt address (0004h). In cases where the execution of the instruction following SLEEP is not desirable, the user should have a NOP after the SLEEP instruction. 11.14.2 WAKE-UP USING INTERRUPTS When global interrupts are disabled (GIE cleared) and any interrupt source has both its interrupt enable bit and interrupt flag bit set, one of the following will occur: * If the interrupt occurs before the execution of a SLEEP instruction, the SLEEP instruction will complete as a NOP. Therefore, the WDT and WDT postscaler will not be cleared, the TO bit will not be set and PD bits will not be cleared. * If the interrupt occurs during or after the execution of a SLEEP instruction, the device will immediately wake-up from SLEEP. The SLEEP instruction will be completely executed before the wake-up. Therefore, the WDT and WDT postscaler will be cleared, the TO bit will be set and the PD bit will be cleared. Even if the flag bits were checked before executing a SLEEP instruction, it may be possible for flag bits to become set before the SLEEP instruction completes. To determine whether a SLEEP instruction executed, test the PD bit. If the PD bit is set, the SLEEP instruction was executed as a NOP. To ensure that the WDT is cleared, a CLRWDT instruction should be executed before a SLEEP instruction. TMR1 interrupt. Timer1 must be operating as an asynchronous counter. CCP Capture mode interrupt. Special event trigger (Timer1 in Asynchronous mode using an external clock). SSP (START/STOP) bit detect interrupt. SSP transmit or receive in Slave mode (SPI/I2C). A/D conversion (when A/D clock source is RC). 2002 Microchip Technology Inc. DS39597B-page 71 PIC16F72 FIGURE 11-12: WAKE-UP FROM SLEEP THROUGH INTERRUPT Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 OSC1 TOST(2) CLKO(4) INT pin INTF Flag (INTCON<1>) Interrupt Latency (Note 2) GIE bit (INTCON<7>) Processor in SLEEP INSTRUCTION FLOW PC Instruction Fetched Instruction Executed Note 1: 2: 3: 4: PC PC+1 Inst(PC) = SLEEP Inst(PC + 1) PC+2 Inst(PC + 2) PC+2 Inst(PC - 1) SLEEP Inst(PC + 1) PC + 2 Dummy cycle 0004h 0005h Inst(0004h) Inst(0005h) Dummy cycle Inst(0004h) XT, HS or LP Oscillator mode assumed. TOST = 1024 TOSC (drawing not to scale) This delay will not be there for RC Osc mode. GIE = `1' assumed. In this case, after wake-up, the processor jumps to the interrupt routine. If GIE = `0', execution will continue in-line. CLKO is not available in these Osc modes, but shown here for timing reference. 11.15 Program Verification/ Code Protection FIGURE 11-13: TYPICAL IN-CIRCUIT SERIAL PROGRAMMING CONNECTION If the code protection bit(s) have not been programmed, the on-chip program memory can be read out for verification purposes. 11.16 ID Locations Four memory locations (2000h - 2003h) are designated as ID locations, where the user can store checksum or other code identification numbers. These locations are not accessible during normal execution, but are readable and writable during program/verify. It is recommended that only the four Least Significant bits of the ID location are used. 11.17 In-Circuit Serial Programming PIC16F72 microcontrollers can be serially programmed while in the end application circuit. This is simply done with two lines for clock and data and three other lines for power, ground, and the programming voltage (see Figure 11-13 for an example). This allows customers to manufacture boards with unprogrammed devices, and then program the microcontroller just before shipping the product. This also allows the most recent firmware or a custom firmware to be programmed. To Normal Connections External Connector Signals * PIC16F72 +5V VDD 0V VSS VPP MCLR/VPP CLK RB6 Data I/O RB7 * * * VDD To Normal Connections * Isolation devices (as required). For general information of serial programming, please refer to the In-Circuit Serial ProgrammingTM (ICSPTM) Guide (DS30277). For specific details on programming commands and operations for the PIC16F72 devices, please refer to the latest version of the PIC16F72 FLASH Program Memory Programming Specification (DS39588). DS39597B-page 72 2002 Microchip Technology Inc. PIC16F72 12.0 INSTRUCTION SET SUMMARY Each PIC16F72 instruction is a 14-bit word divided into an OPCODE that specifies the instruction type and one or more operands that further specify the operation of the instruction. The PIC16F72 instruction set summary in Table 12-2 lists byte-oriented, bit-oriented, and literal and control operations. Table 12-1 shows the opcode field descriptions. For byte-oriented instructions, `f' represents a file register designator and `d' represents a destination designator. The file register designator specifies which file register is to be used by the instruction. The destination designator specifies where the result of the operation is to be placed. If `d' is zero, the result is placed in the W register. If `d' is one, the result is placed in the file register specified in the instruction. For bit-oriented instructions, `b' represents a bit field designator which selects the number of the bit affected by the operation, while `f' represents the number of the file in which the bit is located. For literal and control operations, `k' represents an eight or eleven-bit constant or literal value. TABLE 12-1: OPCODE FIELD DESCRIPTIONS Field Figure 12-1 shows the general formats that the instructions can have. All examples use the following format to represent a hexadecimal number: 0xhh where h signifies a hexadecimal digit. FIGURE 12-1: GENERAL FORMAT FOR INSTRUCTIONS Byte-oriented file register operations 13 8 7 6 OPCODE d f (FILE #) 0 d = 0 for destination W d = 1 for destination f f = 7-bit file register address Bit-oriented file register operations 13 10 9 7 6 OPCODE b (BIT #) f (FILE #) 0 b = 3-bit bit address f = 7-bit file register address Literal and control operations Description f Register file address (0x00 to 0x7F) W Working register (accumulator) b Bit address within an 8-bit file register k Literal field, constant data or label x Don't care location (= 0 or 1). The assembler will generate code with x = 0. It is the recommended form of use for compatibility with all Microchip software tools. d Table 12-2 lists the instructions recognized by the MPASMTM assembler. Destination select; d = 0: store result in W, d = 1: store result in file register f. Default is d = 1. PC Program Counter TO Time-out bit PD Power-down bit General 13 8 7 OPCODE 0 k (literal) k = 8-bit immediate value CALL and GOTO instructions only 13 11 OPCODE 10 0 k (literal) k = 11-bit immediate value A description of each instruction is available in the PICmicroTM Mid-Range MCU Family Reference Manual (DS33023). The instruction set is highly orthogonal and is grouped into three basic categories: * Byte-oriented operations * Bit-oriented operations * Literal and control operations All instructions are executed within one single instruction cycle, unless a conditional test is true or the program counter is changed as a result of an instruction. In this case, the execution takes two instruction cycles, with the second cycle executed as a NOP. One instruction cycle consists of four oscillator periods. Thus, for an oscillator frequency of 4 MHz, the normal instruction execution time is 1 s. If a conditional test is true, or the program counter is changed as a result of an instruction, the instruction execution time is 2 s. 2002 Microchip Technology Inc. DS39597B-page 73 PIC16F72 TABLE 12-2: Mnemonic, Operands PIC16F72 INSTRUCTION SET Description Cycles 14-Bit Opcode MSb LSb Status Affected Notes BYTE-ORIENTED FILE REGISTER OPERATIONS ADDWF ANDWF CLRF CLRW COMF DECF DECFSZ INCF INCFSZ IORWF MOVF MOVWF NOP RLF RRF SUBWF SWAPF XORWF f, d f, d f f, d f, d f, d f, d f, d f, d f, d f f, d f, d f, d f, d f, d Add W and f AND W with f Clear f Clear W Complement f Decrement f Decrement f, Skip if 0 Increment f Increment f, Skip if 0 Inclusive OR W with f Move f Move W to f No Operation Rotate Left f through Carry Rotate Right f through Carry Subtract W from f Swap nibbles in f Exclusive OR W with f 1 1 1 1 1 1 1(2) 1 1(2) 1 1 1 1 1 1 1 1 1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0111 0101 0001 0001 1001 0011 1011 1010 1111 0100 1000 0000 0000 1101 1100 0010 1110 0110 dfff dfff lfff 0xxx dfff dfff dfff dfff dfff dfff dfff lfff 0xx0 dfff dfff dfff dfff dfff ffff ffff ffff xxxx ffff ffff ffff ffff ffff ffff ffff ffff 0000 ffff ffff ffff ffff ffff 00bb 01bb 10bb 11bb bfff bfff bfff bfff ffff ffff ffff ffff 111x 1001 0kkk 0000 1kkk 1000 00xx 0000 01xx 0000 0000 110x 1010 kkkk kkkk kkkk 0110 kkkk kkkk kkkk 0000 kkkk 0000 0110 kkkk kkkk kkkk kkkk kkkk 0100 kkkk kkkk kkkk 1001 kkkk 1000 0011 kkkk kkkk C,DC,Z Z Z Z Z Z Z Z Z C C C,DC,Z Z 1,2 1,2 2 1,2 1,2 1,2,3 1,2 1,2,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 BIT-ORIENTED FILE REGISTER OPERATIONS BCF BSF BTFSC BTFSS f, b f, b f, b f, b Bit Clear f Bit Set f Bit Test f, Skip if Clear Bit Test f, Skip if Set 1 1 1 (2) 1 (2) ADDLW ANDLW CALL CLRWDT GOTO IORLW MOVLW RETFIE RETLW RETURN SLEEP SUBLW XORLW k k k k k k k k k Add literal and W AND literal with W Call subroutine Clear Watchdog Timer Go to address Inclusive OR literal with W Move literal to W Return from interrupt Return with literal in W Return from Subroutine Go into Standby mode Subtract W from literal Exclusive OR literal with W 01 01 01 01 1,2 1,2 3 3 LITERAL AND CONTROL OPERATIONS 1 1 2 1 2 1 1 2 2 2 1 1 1 11 11 10 00 10 11 11 00 11 00 00 11 11 C,DC,Z Z TO,PD Z TO,PD C,DC,Z Z When an I/O register is modified as a function of itself (e.g., MOVF PORTB, 1), the value used will be that value present on the pins themselves. For example, if the data latch is `1' for a pin configured as input and is driven low by an external device, the data will be written back with a `0'. 2: If this instruction is executed on the TMR0 register (and where applicable, d = 1), the prescaler will be cleared if assigned to the Timer0 module. 3: If Program Counter (PC) is modified or a conditional test is true, the instruction requires two cycles. The second cycle is executed as a NOP. Note 1: Note: Additional information on the mid-range instruction set is available in the PICmicroTM Mid-Range MCU Family Reference Manual (DS33023). DS39597B-page 74 2002 Microchip Technology Inc. PIC16F72 12.1 Instruction Descriptions ADDLW Add Literal and W Syntax: [ label ] ADDLW ANDWF AND W with f Syntax: [ label ] ANDWF Operands: 0 k 255 Operands: 0 f 127 d [0,1] Operation: (W) + k (W) Status Affected: C, DC, Z Operation: (W) .AND. (f) (destination) The contents of the W register are added to the eight-bit literal `k' and the result is placed in the W register. Status Affected: Z Description: AND the W register with register `f'. If `d' = `0', the result is stored in the W register. If `d' = `1', the result is stored back in register `f'. ADDWF Add W and f BCF Bit Clear f Syntax: [ label ] ADDWF Syntax: [ label ] BCF Operands: 0 f 127 d [0,1] Operands: 0 f 127 0b7 Operation: (W) + (f) (destination) Operation: 0 (f) Status Affected: C, DC, Z Status Affected: None Description: Add the contents of the W register with register `f'. If `d' = `0', the result is stored in the W register. If `d' = `1', the result is stored back in register `f'. Description: Bit `b' in register `f' is cleared. ANDLW AND Literal with W BSF Bit Set f Syntax: [ label ] ANDLW Syntax: [ label ] BSF Operands: 0 k 255 Operands: Operation: (W) .AND. (k) (W) 0 f 127 0b7 Status Affected: Z Description: Description: k f,d k The contents of W register are AND'ed with the eight-bit literal `k'. The result is placed in the W register. 2002 Microchip Technology Inc. f,d f,b f,b Operation: 1 (f) Status Affected: None Description: Bit `b' in register `f' is set. DS39597B-page 75 PIC16F72 BTFSS Bit Test f, Skip if Set CLRF Clear f Syntax: [ label ] BTFSS f,b Syntax: [ label ] CLRF Operands: 0 f 127 0b<7 Operands: 0 f 127 Operation: Operation: skip if (f) = 1 00h (f) 1Z Status Affected: None Status Affected: Z Description: If bit `b' in register `f' = `0', the next instruction is executed. If bit `b' = `1', then the next instruction is discarded and a NOP is executed instead, making this a 2 TCY instruction. Description: The contents of register `f' are cleared and the Z bit is set. BTFSC Bit Test, Skip if Clear CLRW Clear W Syntax: [ label ] BTFSC f,b Syntax: [ label ] CLRW Operands: 0 f 127 0b7 Operands: None Operation: Operation: skip if (f) = 0 00h (W) 1Z Status Affected: None Status Affected: Z Description: If bit `b' in register `f' = `1', the next instruction is executed. If bit `b' in register `f' = `0', the next instruction is discarded, and a NOP is executed instead, making this a 2 TCY instruction. Description: W register is cleared. Zero bit (Z) is set. CALL Call Subroutine CLRWDT Clear Watchdog Timer Syntax: [ label ] CALL k Syntax: [ label ] CLRWDT Operands: 0 k 2047 Operands: None Operation: (PC) + 1 TOS, k PC<10:0>, (PCLATH<4:3>) PC<12:11> Operation: Status Affected: None 00h WDT 0 WDT prescaler, 1 TO 1 PD Description: Call Subroutine. First, return address (PC+1) is pushed onto the stack. The eleven-bit immediate address is loaded into PC bits <10:0>. The upper bits of the PC are loaded from PCLATH. CALL is a two-cycle instruction. Status Affected: TO, PD Description: CLRWDT instruction resets the Watchdog Timer. It also resets the prescaler of the WDT. Status bits TO and PD are set. DS39597B-page 76 f 2002 Microchip Technology Inc. PIC16F72 COMF Complement f Syntax: [ label ] COMF GOTO Unconditional Branch Syntax: [ label ] Operands: 0 f 127 d [0,1] Operands: 0 k 2047 Operation: (f) (destination) Operation: k PC<10:0> PCLATH<4:3> PC<12:11> Status Affected: Z Status Affected: None Description: The contents of register `f' are complemented. If `d' = `0', the result is stored in W. If `d' = `1', the result is stored back in register `f'. Description: GOTO is an unconditional branch. The eleven-bit immediate value is loaded into PC bits <10:0>. The upper bits of PC are loaded from PCLATH<4:3>. GOTO is a two-cycle instruction. DECF Decrement f INCF Increment f Syntax: [ label ] DECF f,d Syntax: [ label ] Operands: 0 f 127 d [0,1] Operands: 0 f 127 d [0,1] Operation: (f) - 1 (destination) Operation: (f) + 1 (destination) Status Affected: Z Status Affected: Z Description: Decrement register `f'. If `d' = `0', the result is stored in the W register. If `d' = `1', the result is stored back in register `f'. Description: The contents of register `f' are incremented. If `d' = `0', the result is placed in the W register. If `d' = `1', the result is placed back in register `f'. DECFSZ Decrement f, Skip if 0 INCFSZ Increment f, Skip if 0 Syntax: [ label ] DECFSZ f,d Syntax: [ label ] Operands: 0 f 127 d [0,1] Operands: 0 f 127 d [0,1] Operation: (f) - 1 (destination); skip if result = 0 Operation: (f) + 1 (destination), skip if result = 0 Status Affected: None Status Affected: None Description: The contents of register `f' are decremented. If `d' = `0', the result is placed in the W register. If `d' = `1', the result is placed back in register `f'. If the result is `1', the next instruction is executed. If the result is `0', then a NOP is executed instead, making it a 2 TCY instruction. Description: The contents of register `f' are incremented. If `d' = `0', the result is placed in the W register. If `d' = `1', the result is placed back in register `f'. If the result is `1', the next instruction is executed. If the result is `0', a NOP is executed instead, making it a 2 TCY instruction. 2002 Microchip Technology Inc. f,d GOTO k INCF f,d INCFSZ f,d DS39597B-page 77 PIC16F72 IORLW Inclusive OR Literal with W MOVLW Move Literal to W Syntax: [ label ] Syntax: [ label ] Operands: 0 k 255 Operands: 0 k 255 Operation: (W) .OR. k (W) Operation: k (W) Status Affected: Z Status Affected: None Description: The contents of the W register are OR'd with the eight-bit literal `k'. The result is placed in the W register. Description: The eight-bit literal `k' is loaded into W register. The don't cares will assemble as `0's. IORWF Inclusive OR W with f MOVWF Move W to f Syntax: [ label ] Syntax: [ label ] Operands: 0 f 127 d [0,1] Operands: 0 f 127 Operation: (W) .OR. (f) (destination) (W) (f) Operation: Status Affected: None Status Affected: Z Description: Description: Inclusive OR the W register with register `f'. If `d' = `0', the result is placed in the W register. If `d' = `1', the result is placed back in register `f'. Move data from W register to register `f'. MOVF Move f NOP No Operation IORLW k IORWF f,d Syntax: [ label ] Operands: 0 f 127 d [0,1] Operation: (f) (destination) Status Affected: Z Description: The contents of register `f' are moved to a destination dependant upon the status of `d'. If `d' = `0', the destination is W register. If `d' = `1', the destination is file register `f' itself. `d' = `1' is useful to test a file register, since status flag Z is affected. DS39597B-page 78 MOVF f,d MOVLW k MOVWF Syntax: [ label ] Operands: None Operation: No operation Status Affected: None Description: No operation. f NOP 2002 Microchip Technology Inc. PIC16F72 RETFIE Return from Interrupt RLF Rotate Left f through Carry Syntax: [ label ] Syntax: [ label ] Operands: None Operands: Operation: TOS PC, 1 GIE 0 f 127 d [0,1] Operation: See description below Status Affected: None Status Affected: C Description: The contents of register `f' are rotated one bit to the left through the Carry Flag. If `d' = `0', the result is placed in the W register. If `d' = `1', the result is stored back in register `f'. RETFIE RLF C f,d Register f RETLW Return with Literal in W RRF Rotate Right f through Carry Syntax: [ label ] Syntax: [ label ] Operands: 0 k 255 Operands: Operation: k (W); TOS PC 0 f 127 d [0,1] Operation: See description below Status Affected: None Status Affected: C Description: The W register is loaded with the eight-bit literal `k'. The program counter is loaded from the top of the stack (the return address). This is a two-cycle instruction. Description: The contents of register `f' are rotated one bit to the right through the Carry Flag. If `d' = `0', the result is placed in the W register. If `d' = `1', the result is placed back in register `f'. RETLW k RRF f,d C Register f RETURN Return from Subroutine SLEEP Syntax: [ label ] Syntax: Operands: None Operands: None Operation: TOS PC Operation: 00h WDT, 0 WDT prescaler, 1 TO, 0 PD Status Affected: TO, PD Description: The power-down status bit, PD is cleared. Time-out status bit, TO is set. Watchdog Timer and its prescaler are cleared. The processor is put into SLEEP mode with the oscillator stopped. RETURN Status Affected: None Description: Return from subroutine. The stack is POPed and the top of the stack (TOS) is loaded into the program counter. This is a two-cycle instruction. 2002 Microchip Technology Inc. [ label ] SLEEP DS39597B-page 79 PIC16F72 SUBLW Syntax: Subtract W from Literal [ label ] SUBLW k XORLW Exclusive OR Literal with W Syntax: [ label ] Operands: 0 k 255 Operands: 0 k 255 Operation: k - (W) (W) XORLW k Operation: (W) .XOR. k (W) Status Affected: C, DC, Z Status Affected: Z Description: The W register is subtracted (2's complement method) from the eight-bit literal `k'. The result is placed in the W register. Description: The contents of the W register are XOR'ed with the eight-bit literal `k'. The result is placed in the W register. SUBWF Syntax: Subtract W from f [ label ] SUBWF f,d XORWF Syntax: [ label ] XORWF Operands: 0 f 127 d [0,1] Operands: 0 f 127 d [0,1] Operation: (f) - (W) (destination) Operation: (W) .XOR. (f) (destination) Status Affected: C, DC, Z Status Affected: Z Description: Description: Exclusive OR the contents of the W register with register `f'. If `d' = `0', the result is stored in the W register. If `d' = `1', the result is stored back in register `f'. Subtract (2's complement method) W register from register `f'. If `d' = `0', the result is stored in the W register. If `d' = `1', the result is stored back in register `f'. SWAPF Swap Nibbles in f Syntax: [ label ] SWAPF f,d Operands: 0 f 127 d [0,1] Operation: (f<3:0>) (destination<7:4>), (f<7:4>) (destination<3:0>) Status Affected: None Description: The upper and lower nibbles of register `f' are exchanged. If `d' = `0', the result is placed in W register. If `d' = `1', the result is placed in register `f'. DS39597B-page 80 Exclusive OR W with f f,d 2002 Microchip Technology Inc. PIC16F72 13.0 DEVELOPMENT SUPPORT The PICmicro(R) microcontrollers are supported with a full range of hardware and software development tools: * Integrated Development Environment - MPLAB(R) IDE Software * Assemblers/Compilers/Linkers - MPASMTM Assembler - MPLAB C17 and MPLAB C18 C Compilers - MPLINKTM Object Linker/ MPLIBTM Object Librarian * Simulators - MPLAB SIM Software Simulator * Emulators - MPLAB ICE 2000 In-Circuit Emulator - ICEPICTM In-Circuit Emulator * In-Circuit Debugger - MPLAB ICD * Device Programmers - PRO MATE(R) II Universal Device Programmer - PICSTART(R) Plus Entry-Level Development Programmer * Low Cost Demonstration Boards - PICDEMTM 1 Demonstration Board - PICDEM 2 Demonstration Board - PICDEM 3 Demonstration Board - PICDEM 17 Demonstration Board - KEELOQ(R) Demonstration Board 13.1 MPLAB Integrated Development Environment Software The MPLAB IDE software brings an ease of software development previously unseen in the 8-bit microcontroller market. The MPLAB IDE is a Windows(R)-based application that contains: * An interface to debugging tools - simulator - programmer (sold separately) - emulator (sold separately) - in-circuit debugger (sold separately) * A full-featured editor * A project manager * Customizable toolbar and key mapping * A status bar * On-line help 2002 Microchip Technology Inc. The MPLAB IDE allows you to: * Edit your source files (either assembly or `C') * One touch assemble (or compile) and download to PICmicro emulator and simulator tools (automatically updates all project information) * Debug using: - source files - absolute listing file - machine code The ability to use MPLAB IDE with multiple debugging tools allows users to easily switch from the costeffective simulator to a full-featured emulator with minimal retraining. 13.2 MPASM Assembler The MPASM assembler is a full-featured universal macro assembler for all PICmicro MCU's. The MPASM assembler has a command line interface and a Windows shell. It can be used as a stand-alone application on a Windows 3.x or greater system, or it can be used through MPLAB IDE. The MPASM assembler generates relocatable object files for the MPLINK object linker, Intel(R) standard HEX files, MAP files to detail memory usage and symbol reference, an absolute LST file that contains source lines and generated machine code, and a COD file for debugging. The MPASM assembler features include: * Integration into MPLAB IDE projects. * User-defined macros to streamline assembly code. * Conditional assembly for multi-purpose source files. * Directives that allow complete control over the assembly process. 13.3 MPLAB C17 and MPLAB C18 C Compilers The MPLAB C17 and MPLAB C18 Code Development Systems are complete ANSI `C' compilers for Microchip's PIC17CXXX and PIC18CXXX family of microcontrollers, respectively. These compilers provide powerful integration capabilities and ease of use not found with other compilers. For easier source level debugging, the compilers provide symbol information that is compatible with the MPLAB IDE memory display. DS39597B-page 81 PIC16F72 13.4 MPLINK Object Linker/ MPLIB Object Librarian The MPLINK object linker combines relocatable objects created by the MPASM assembler and the MPLAB C17 and MPLAB C18 C compilers. It can also link relocatable objects from pre-compiled libraries, using directives from a linker script. The MPLIB object librarian is a librarian for precompiled code to be used with the MPLINK object linker. When a routine from a library is called from another source file, only the modules that contain that routine will be linked in with the application. This allows large libraries to be used efficiently in many different applications. The MPLIB object librarian manages the creation and modification of library files. The MPLINK object linker features include: * Integration with MPASM assembler and MPLAB C17 and MPLAB C18 C compilers. * Allows all memory areas to be defined as sections to provide link-time flexibility. The MPLIB object librarian features include: * Easier linking because single libraries can be included instead of many smaller files. * Helps keep code maintainable by grouping related modules together. * Allows libraries to be created and modules to be added, listed, replaced, deleted or extracted. 13.5 MPLAB SIM Software Simulator The MPLAB SIM software simulator allows code development in a PC-hosted environment by simulating the PICmicro series microcontrollers on an instruction level. On any given instruction, the data areas can be examined or modified and stimuli can be applied from a file, or user-defined key press, to any of the pins. The execution can be performed in single step, execute until break, or trace mode. 13.6 MPLAB ICE High Performance Universal In-Circuit Emulator with MPLAB IDE The MPLAB ICE universal in-circuit emulator is intended to provide the product development engineer with a complete microcontroller design tool set for PICmicro microcontrollers (MCUs). Software control of the MPLAB ICE in-circuit emulator is provided by the MPLAB Integrated Development Environment (IDE), which allows editing, building, downloading and source debugging from a single environment. The MPLAB ICE 2000 is a full-featured emulator system with enhanced trace, trigger and data monitoring features. Interchangeable processor modules allow the system to be easily reconfigured for emulation of different processors. The universal architecture of the MPLAB ICE in-circuit emulator allows expansion to support new PICmicro microcontrollers. The MPLAB ICE in-circuit emulator system has been designed as a real-time emulation system, with advanced features that are generally found on more expensive development tools. The PC platform and Microsoft(R) Windows environment were chosen to best make these features available to you, the end user. 13.7 ICEPIC In-Circuit Emulator The ICEPIC low cost, in-circuit emulator is a solution for the Microchip Technology PIC16C5X, PIC16C6X, PIC16C7X and PIC16CXXX families of 8-bit OneTime-Programmable (OTP) microcontrollers. The modular system can support different subsets of PIC16C5X or PIC16CXXX products through the use of interchangeable personality modules, or daughter boards. The emulator is capable of emulating without target application circuitry being present. The MPLAB SIM simulator fully supports symbolic debugging using the MPLAB C17 and the MPLAB C18 C compilers and the MPASM assembler. The software simulator offers the flexibility to develop and debug code outside of the laboratory environment, making it an excellent multiproject software development tool. DS39597B-page 82 2002 Microchip Technology Inc. PIC16F72 13.8 MPLAB ICD In-Circuit Debugger Microchip's In-Circuit Debugger, MPLAB ICD, is a powerful, low cost, run-time development tool. This tool is based on the FLASH PICmicro MCUs and can be used to develop for this and other PICmicro microcontrollers. The MPLAB ICD utilizes the in-circuit debugging capability built into the FLASH devices. This feature, along with Microchip's In-Circuit Serial ProgrammingTM protocol, offers cost-effective in-circuit FLASH debugging from the graphical user interface of the MPLAB Integrated Development Environment. This enables a designer to develop and debug source code by watching variables, single-stepping and setting break points. Running at full speed enables testing hardware in realtime. 13.9 PRO MATE II Universal Device Programmer The PRO MATE II universal device programmer is a full-featured programmer, capable of operating in stand-alone mode, as well as PC-hosted mode. The PRO MATE II device programmer is CE compliant. The PRO MATE II device programmer has programmable VDD and VPP supplies, which allow it to verify programmed memory at VDD min and VDD max for maximum reliability. It has an LCD display for instructions and error messages, keys to enter commands and a modular detachable socket assembly to support various package types. In stand-alone mode, the PRO MATE II device programmer can read, verify, or program PICmicro devices. It can also set code protection in this mode. 13.10 PICSTART Plus Entry Level Development Programmer The PICSTART Plus development programmer is an easy-to-use, low cost, prototype programmer. It connects to the PC via a COM (RS-232) port. MPLAB Integrated Development Environment software makes using the programmer simple and efficient. The PICSTART Plus development programmer supports all PICmicro devices with up to 40 pins. Larger pin count devices, such as the PIC16C92X and PIC17C76X, may be supported with an adapter socket. The PICSTART Plus development programmer is CE compliant. 2002 Microchip Technology Inc. 13.11 PICDEM 1 Low Cost PICmicro Demonstration Board The PICDEM 1 demonstration board is a simple board which demonstrates the capabilities of several of Microchip's microcontrollers. The microcontrollers supported are: PIC16C5X (PIC16C54 to PIC16C58A), PIC16C61, PIC16C62X, PIC16C71, PIC16C8X, PIC17C42, PIC17C43 and PIC17C44. All necessary hardware and software is included to run basic demo programs. The user can program the sample microcontrollers provided with the PICDEM 1 demonstration board on a PRO MATE II device programmer, or a PICSTART Plus development programmer, and easily test firmware. The user can also connect the PICDEM 1 demonstration board to the MPLAB ICE incircuit emulator and download the firmware to the emulator for testing. A prototype area is available for the user to build some additional hardware and connect it to the microcontroller socket(s). Some of the features include an RS-232 interface, a potentiometer for simulated analog input, push button switches and eight LEDs connected to PORTB. 13.12 PICDEM 2 Low Cost PIC16CXX Demonstration Board The PICDEM 2 demonstration board is a simple demonstration board that supports the PIC16C62, PIC16C64, PIC16C65, PIC16C73 and PIC16C74 microcontrollers. All the necessary hardware and software is included to run the basic demonstration programs. The user can program the sample microcontrollers provided with the PICDEM 2 demonstration board on a PRO MATE II device programmer, or a PICSTART Plus development programmer, and easily test firmware. The MPLAB ICE in-circuit emulator may also be used with the PICDEM 2 demonstration board to test firmware. A prototype area has been provided to the user for adding additional hardware and connecting it to the microcontroller socket(s). Some of the features include a RS-232 interface, push button switches, a potentiometer for simulated analog input, a serial EEPROM to demonstrate usage of the I2CTM bus and separate headers for connection to an LCD module and a keypad. DS39597B-page 83 PIC16F72 13.13 PICDEM 3 Low Cost PIC16CXXX Demonstration Board The PICDEM 3 demonstration board is a simple demonstration board that supports the PIC16C923 and PIC16C924 in the PLCC package. It will also support future 44-pin PLCC microcontrollers with an LCD Module. All the necessary hardware and software is included to run the basic demonstration programs. The user can program the sample microcontrollers provided with the PICDEM 3 demonstration board on a PRO MATE II device programmer, or a PICSTART Plus development programmer with an adapter socket, and easily test firmware. The MPLAB ICE in-circuit emulator may also be used with the PICDEM 3 demonstration board to test firmware. A prototype area has been provided to the user for adding hardware and connecting it to the microcontroller socket(s). Some of the features include a RS-232 interface, push button switches, a potentiometer for simulated analog input, a thermistor and separate headers for connection to an external LCD module and a keypad. Also provided on the PICDEM 3 demonstration board is a LCD panel, with 4 commons and 12 segments, that is capable of displaying time, temperature and day of the week. The PICDEM 3 demonstration board provides an additional RS-232 interface and Windows software for showing the demultiplexed LCD signals on a PC. A simple serial interface allows the user to construct a hardware demultiplexer for the LCD signals. DS39597B-page 84 13.14 PICDEM 17 Demonstration Board The PICDEM 17 demonstration board is an evaluation board that demonstrates the capabilities of several Microchip microcontrollers, including PIC17C752, PIC17C756A, PIC17C762 and PIC17C766. All necessary hardware is included to run basic demo programs, which are supplied on a 3.5-inch disk. A programmed sample is included and the user may erase it and program it with the other sample programs using the PRO MATE II device programmer, or the PICSTART Plus development programmer, and easily debug and test the sample code. In addition, the PICDEM 17 demonstration board supports downloading of programs to and executing out of external FLASH memory on board. The PICDEM 17 demonstration board is also usable with the MPLAB ICE in-circuit emulator, or the PICMASTER emulator and all of the sample programs can be run and modified using either emulator. Additionally, a generous prototype area is available for user hardware. 13.15 KEELOQ Evaluation and Programming Tools KEELOQ evaluation and programming tools support Microchip's HCS Secure Data Products. The HCS evaluation kit includes a LCD display to show changing codes, a decoder to decode transmissions and a programming interface to program test transmitters. 2002 Microchip Technology Inc. Software Tools Programmers Debugger Emulators 9 9 9 9 9 9 PIC17C7XX 9 9 9 9 9 9 PIC17C4X 9 9 9 9 9 9 PIC16C9XX 9 9 9 9 9 PIC16F8XX 9 9 9 9 9 PIC16C8X/ PIC16F8X 9 9 9 9 9 9 PIC16C7XX 9 9 9 9 9 9 PIC16C7X 9 9 9 9 9 9 PIC16F62X 9 9 9 PIC16CXXX 9 9 9 9 PIC16C6X 9 9 9 9 PIC16C5X 9 9 9 9 PIC14000 9 9 9 PIC12CXXX 9 9 9 2002 Microchip Technology Inc. 9 9 9 9 9 9 9 9 9 9 9 9 MCRFXXX 9 9 9 9 9 9 9 9 9 MCP2510 9 * Contact the Microchip Technology Inc. web site at www.microchip.com for information on how to use the MPLAB(R) ICD In-Circuit Debugger (DV164001) with PIC16C62, 63, 64, 65, 72, 73, 74, 76, 77. ** Contact Microchip Technology Inc. for availability date. Development tool is available on select devices. MCP2510 CAN Developer's Kit 9 13.56 MHz Anticollision microIDTM Developer's Kit 9 9 125 kHz Anticollision microIDTM Developer's Kit 125 kHz microIDTM Developer's Kit microIDTM Programmer's Kit KEELOQ(R) Transponder Kit KEELOQ(R) Evaluation Kit 9 9 PICDEMTM 17 Demonstration Board 9 9 PICDEMTM 14A Demonstration Board 9 9 PICDEMTM 3 Demonstration Board 9 9 24CXX/ 25CXX/ 93CXX 9 PICDEMTM 2 Demonstration Board 9 HCSXXX 9 PICDEMTM 1 Demonstration Board 9 ** 9 PRO MATE(R) II Universal Device Programmer ** PIC18FXXX 9 PICSTART(R) Plus Entry Level Development Programmer * PIC18CXX2 9 * 9 9 9 9 MPLAB(R) ICD In-Circuit Debugger 9 ** 9 9 ICEPICTM In-Circuit Emulator MPLAB(R) ICE In-Circuit Emulator MPASMTM Assembler/ MPLINKTM Object Linker MPLAB(R) C18 C Compiler MPLAB(R) C17 C Compiler TABLE 13-1: Demo Boards and Eval Kits MPLAB(R) Integrated Development Environment PIC16F72 DEVELOPMENT TOOLS FROM MICROCHIP DS39597B-page 85 PIC16F72 NOTES: DS39597B-page 86 2002 Microchip Technology Inc. PIC16F72 14.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Ambient temperature under bias................................................................................................................ -55 to +125C Storage temperature .............................................................................................................................. -65C to +150C Voltage on any pin with respect to VSS (except VDD, MCLR. and RA4) ......................................... -0.3V to (VDD + 0.3V) Voltage on VDD with respect to VSS ............................................................................................................ -0.3 to +6.5V Voltage on MCLR with respect to VSS (Note 2) ..............................................................................................0 to +13.5V Voltage on RA4 with respect to Vss ...................................................................................................................0 to +12V Total power dissipation (Note 1) ...............................................................................................................................1.0W Maximum current out of VSS pin ...........................................................................................................................300 mA Maximum current into VDD pin ..............................................................................................................................250 mA Input clamp current, IIK (VI < 0 or VI > VDD)..................................................................................................................... 20 mA Output clamp current, IOK (VO < 0 or VO > VDD) ............................................................................................................. 20 mA Maximum output current sunk by any I/O pin..........................................................................................................25 mA Maximum output current sourced by any I/O pin ....................................................................................................25 mA Maximum current sunk by PORTA, PORTB..........................................................................................................200 mA Maximum current sourced by PORTA, PORTB ....................................................................................................200 mA Maximum current sunk by PORTC .......................................................................................................................200 mA Maximum current sourced by PORTC ..................................................................................................................200 mA Note 1: Power dissipation is calculated as follows: Pdis = VDD x {IDD - IOH} + {(VDD - VOH) x IOH} + (VOl x IOL) 2: Voltage spikes at the MCLR pin may cause unpredictable results. A series resistor of greater than 1 k should be used to pull MCLR to VDD, rather than tying the pin directly to VDD. NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. 2002 Microchip Technology Inc. DS39597B-page 87 PIC16F72 FIGURE 14-1: PIC16F72 (INDUSTRIAL, EXTENDED) VOLTAGE-FREQUENCY GRAPH 6.0V 5.5V 5.0V Voltage 4.5V 4.0V 3.5V 3.0V 2.5V 2.0V 16 MHz 20 MHz Frequency FIGURE 14-2: PIC16LF72 (INDUSTRIAL) VOLTAGE-FREQUENCY GRAPH 6.0V 5.5V Voltage 5.0V 4.5V 4.0V 3.5V 3.0V 2.5V 2.0V 4 MHz 10 MHz Frequency FMAX = (12 MHz/V) (VDDAPPMIN - 2.5V) + 4 MHz Note 1: VDDAPPMIN is the minimum voltage of the PICmicro(R) device in the application. Note 2: FMAX has a maximum frequency of 10 MHz. DS39597B-page 88 2002 Microchip Technology Inc. PIC16F72 14.1 DC Characteristics: PIC16F72 (Industrial, Extended) PIC16LF72 (Industrial) PIC16LF72 (Industrial) Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial PIC16F72 (Industrial, Extended) Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Param No. Sym VDD Characteristic Min Typ Max Units Supply Voltage D001 D001 D001A PIC16LF72 2.0 2.5 2.2 -- -- -- 5.5 5.5 5.5 V V V A/D not used, -40C to +85C A/D in use, -40C to +85C A/D in use, 0C to +85C PIC16F72 4.0 VBOR* -- -- 5.5 5.5 V V All configurations BOR enabled (Note 7) D002* VDR RAM Data Retention Voltage (Note 1) -- 1.5 -- V D003 VPOR VDD Start Voltage to ensure internal Power-on Reset signal -- VSS -- V D004* SVDD VDD Rise Rate to ensure internal Power-on Reset signal 0.05 -- -- D005 VBOR Brown-out Reset Voltage 3.65 4.0 4.35 * Note 1: 2: 3: 4: 5: 6: 7: Conditions See section on Power-on Reset for details V/ms See section on Power-on Reset for details V BOREN bit in configuration word enabled These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. This is the limit to which VDD can be lowered without losing RAM data. The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active Operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD MCLR = VDD; WDT enabled/disabled as specified. The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS. For RC osc configuration, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k. Timer1 oscillator (when enabled) adds approximately 20 A to the specification. This value is from characterization and is for design guidance only. This is not tested. The current is the additional current consumed when this peripheral is enabled. This current should be added to the base IDD or IPD measurement. When BOR is enabled, the device will operate correctly until the VBOR voltage trip point is reached. 2002 Microchip Technology Inc. DS39597B-page 89 PIC16F72 14.1 DC Characteristics: PIC16F72 (Industrial, Extended) PIC16LF72 (Industrial) (Continued) PIC16LF72 (Industrial) Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial PIC16F72 (Industrial, Extended) Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Param No. Sym IDD Characteristic PIC16LF72 D010A D010 PIC16F72 D013 IBOR Brown-out Reset Current (Note 6) IPD Typ Max Units Conditions Supply Current (Notes 2, 5) D010 D015* Min -- 0.4 2.0 mA XT, RC osc configuration FOSC = 4 MHz, VDD = 3.0V (Note 4) LP osc configuration FOSC = 32 kHz, VDD = 3.0V, WDT disabled -- 25 48 A - 0.9 4 mA -- 5.2 15 mA -- 25 200 A BOR enabled, VDD = 5.0V XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) HS osc configuration FOSC = 20 MHz, VDD = 5.5V Power-down Current (Notes 3, 5) D020 D021 PIC16LF72 -- -- 2.0 0.1 30 5 A A VDD = 3.0V, WDT enabled, -40C to +85C VDD = 3.0V, WDT disabled, -40C to +85C D020 D021 PIC16F72 -- 5.0 0.1 42 19 A A VDD = 4.0V, WDT enabled, -40C to +85C VDD = 4.0V, WDT disabled, -40C to +85C IBOR Brown-out Reset Current (Note 6) -- 25 200 A BOR enabled, VDD = 5.0V D023* * Note 1: 2: 3: 4: 5: 6: 7: These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. This is the limit to which VDD can be lowered without losing RAM data. The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active Operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD MCLR = VDD; WDT enabled/disabled as specified. The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS. For RC osc configuration, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k. Timer1 oscillator (when enabled) adds approximately 20 A to the specification. This value is from characterization and is for design guidance only. This is not tested. The current is the additional current consumed when this peripheral is enabled. This current should be added to the base IDD or IPD measurement. When BOR is enabled, the device will operate correctly until the VBOR voltage trip point is reached. DS39597B-page 90 2002 Microchip Technology Inc. PIC16F72 14.2 DC Characteristics: PIC16F72 (Industrial, Extended) PIC16LF72 (Industrial) Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Operating voltage VDD range as described in DC Specification, Section 14.1. DC CHARACTERISTICS Param No. Sym VIL D030 D030A D031 Characteristic Input Low Voltage I/O ports with TTL buffer with Schmitt Trigger buffer D032 D033 VIH D040 D040A D041 MCLR, OSC1 (in RC mode) OSC1 (in XT and LP mode) OSC1 (in HS mode) Input High Voltage I/O ports with TTL buffer with Schmitt Trigger buffer D042 D042A Min Typ Max Units VSS VSS VSS -- -- -- 0.15 VDD 0.8V 0.2 VDD V V V VSS VSS VSS -- -- -- 0.2 VDD 0.3V 0.3 VDD V V V (Note 1) (Note 1) 2.0 0.25 VDD + 0.8V 0.8 VDD -- -- -- VDD VDD VDD V V V 4.5V VDD 5.5V For entire VDD range For entire VDD range -- -- -- -- 250 VDD VDD VDD VDD 400 V V V V A -- 1 A Vss VPIN VDD, Pin at hi-impedance -- -- 5 5 A A Vss VPIN VDD Vss VPIN VDD, XT, HS and LP osc configuration D060 MCLR 0.8 VDD OSC1 (in XT and LP mode) 1.6V OSC1 (in HS mode) 0.7 VDD OSC1 (in RC mode) 0.9 VDD PORTB Weak Pull-up Current 50 Input Leakage Current (Notes 2, 3) I/O ports -- D061 D063 MCLR, RA4/T0CKI OSC1 D043 D070 IPURB IIL -- -- Conditions For entire VDD range 4.5V VDD 5.5V (Note 1) (Note 1) VDD = 5V, VPIN = VSS * These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the PIC16F72 be driven with external clock in RC mode. 2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent normal operating conditions. Higher leakage current may be measured at different input voltages. 3: Negative current is defined as current sourced by the pin. 2002 Microchip Technology Inc. DS39597B-page 91 PIC16F72 14.2 DC Characteristics: PIC16F72 (Industrial, Extended) PIC16LF72 (Industrial) (Continued) Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Operating voltage VDD range as described in DC Specification, Section 14.1. DC CHARACTERISTICS Param No. Sym Min Typ Max Units D080 Output Low Voltage I/O ports -- -- 0.6 V D083 OSC2/CLKO (RC osc config) -- -- 0.6 V D090 Output High Voltage I/O ports (Note 3) VDD - 0.7 -- -- V D092 OSC2/CLKO (RC osc config) VDD - 0.7 -- -- V Open Drain High Voltage -- Capacitive Loading Specs on Output Pins OSC2 pin -- -- 12 V -- 15 pF All I/O pins and OSC2 (in RC mode) -- 50 pF VOL VOH D150* VOD D100 COSC2 D101 CIO Characteristic -- Conditions IOL = 8.5 mA, VDD = 4.5V, -40C to +85C IOL = 1.6 mA, VDD = 4.5V, -40C to +85C IOH = -3.0 mA, VDD = 4.5V, -40C to +85C IOH = -1.3 mA, VDD = 4.5V, -40C to +85C RA4 pin In XT, HS and LP modes when external clock is used to drive OSC1 -- -- 400 pF SCL, SDA in I2C mode Program FLASH Memory D130 EP Endurance 100 1000 -- E/W 25C at 5V D131 VPR VDD for read 2.0 -- 5.5 V * These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the PIC16F72 be driven with external clock in RC mode. 2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent normal operating conditions. Higher leakage current may be measured at different input voltages. 3: Negative current is defined as current sourced by the pin. D102 CB DS39597B-page 92 2002 Microchip Technology Inc. PIC16F72 14.3 Timing Parameter Symbology The timing parameter symbols have been created following one of the following formats: 1. TppS2ppS 3. TCC:ST (I2C specifications only) 2. TppS 4. Ts (I2C specifications only) T F Frequency Lowercase letters (pp) and their meanings: pp cc CCP1 ck CLKO cs CS di SDI do SDO dt Data in io I/O port mc MCLR Uppercase letters and their meanings: S F Fall H High I Invalid (Hi-impedance) L Low I2C only AA BUF output access Bus free TCC:ST (I2C specifications only) CC HD Hold ST DAT DATA input hold STA START condition FIGURE 14-3: T Time osc rd rw sc ss t0 t1 wr OSC1 RD RD or WR SCK SS T0CKI T1CKI WR P R V Z Period Rise Valid Hi-impedance High Low High Low SU Setup STO STOP condition LOAD CONDITIONS Load Condition 1 Load Condition 2 VDD/2 RL CL Pin VSS CL Pin VSS RL = 464 CL = 50 pF 15 pF for all pins except OSC2 for OSC2 output 2002 Microchip Technology Inc. DS39597B-page 93 PIC16F72 FIGURE 14-4: EXTERNAL CLOCK TIMING Q4 Q1 Q2 Q3 Q4 Q1 OSC1 1 3 4 3 4 2 CLKO TABLE 14-1: Parameter No. EXTERNAL CLOCK TIMING REQUIREMENTS Symbol FOSC Characteristic Min Typ DC -- 1 MHz XT Osc mode DC -- 20 MHz HS Osc mode DC -- 32 kHz DC -- 4 MHz RC osc mode 0.1 -- 4 MHz XT Osc mode 4 5 -- -- 20 200 MHz HS Osc mode kHz LP Osc mode External CLKI Period (Note 1) 1000 -- -- ns XT Osc mode 50 -- -- ns HS Osc mode 5 -- -- ms LP Osc mode Oscillator Period (Note 1) 250 -- -- ns RC Osc mode 250 -- 10,000 ns XT Osc mode 50 -- 250 ns HS Osc mode External CLKI Frequency (Note 1) Oscillator Frequency (Note 1) 1 TOSC Max Units Conditions LP Osc mode 5 -- -- ms LP Osc mode 2 TCY Instruction Cycle Time (Note 1) 200 TCY DC ns TCY = 4/FOSC 3 TosL, TosH External Clock in (OSC1) High or Low Time 500 -- -- ns XT oscillator 2.5 -- -- ms LP oscillator 15 -- -- ns HS oscillator -- -- 25 ns XT oscillator -- -- 50 ns LP oscillator -- -- 15 ns HS oscillator 4 TosR, TosF External Clock in (OSC1) Rise or Fall Time Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: Instruction cycle period (TCY) equals four times the input oscillator time-base period. All specified values are based on characterization data for that particular oscillator type under standard operating conditions with the device executing code. Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current consumption. All devices are tested to operate at "min" values with an external clock applied to the OSC1/CLKI pin. When an external clock input is used, the "max" cycle time limit is "DC" (no clock) for all devices. DS39597B-page 94 2002 Microchip Technology Inc. PIC16F72 FIGURE 14-5: CLKO AND I/O TIMING Q1 Q4 Q2 Q3 OSC1 11 10 CLKO 13 14 19 12 18 16 I/O Pin (Input) 15 17 I/O Pin (Output) New Value Old Value 20, 21 Note: Refer to Figure 14-3 for load conditions. TABLE 14-2: Param No. CLKO AND I/O TIMING REQUIREMENTS Symbol Characteristic Min Typ Max Units Conditions 10* TosH2ckL OSC1 to CLKO -- 75 200 ns (Note 1) 11* TosH2ckH OSC1 to CLKO -- 75 200 ns (Note 1) 12* TckR CLKO rise time -- 35 100 ns (Note 1) 13* TckF CLKO fall time -- 35 100 ns (Note 1) -- -- 0.5 TCY + 20 ns (Note 1) TOSC + 200 -- -- ns (Note 1) (Note 1) 14* TckL2ioV CLKO to Port out valid 15* TioV2ckH Port in valid before CLKO 16* TckH2ioI Port in hold after CLKO 0 -- -- ns 17* TosH2ioV OSC1 (Q1 cycle) to Port out valid -- 100 255 ns 18* TosH2ioI OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) Standard (F) 100 -- -- ns Extended (LF) 200 -- -- ns -- ns ns 19* TioV2osH Port input valid to OSC1 (I/O in setup time) 0 -- 20* TioR Port output rise time 21* TioF Port output fall time Standard (F) -- 10 40 Extended (LF) -- -- 145 ns Standard (F) -- 10 40 ns Extended (LF) -- -- 145 ns 22* TINP INT pin high or low time TCY -- -- ns 23* TRBP RB7:RB4 change INT high or low time TCY -- -- ns * These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. These parameters are asynchronous events, not related to any internal clock edges. Note 1: Measurements are taken in RC mode, where CLKO output is 4 x TOSC. 2002 Microchip Technology Inc. DS39597B-page 95 PIC16F72 FIGURE 14-6: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP TIMER TIMING VDD MCLR 30 Internal POR 33 PWRT Time-out 32 OSC Time-out Internal RESET Watchdog Timer Reset 31 34 34 I/O Pins Note: Refer to Figure 14-3 for load conditions. FIGURE 14-7: BROWN-OUT RESET TIMING VBOR VDD 35 TABLE 14-3: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER, AND BROWN-OUT RESET REQUIREMENTS Parameter No. Symbol Characteristic Min Typ Max Units Conditions 30 TmcL MCLR Pulse Width (low) 2 -- -- s VDD = 5V, -40C to +85C 31* TWDT Watchdog Timer Time-out Period (No Prescaler) 7 18 33 ms VDD = 5V, -40C to +85C 32 TOST Oscillation Start-up Timer Period -- 1024 TOSC -- -- TOSC = OSC1 period 33* TPWRT Power-up Timer Period 28 72 132 ms VDD = 5V, -40C to +85C 34 TIOZ I/O Hi-impedance from MCLR Low or Watchdog Timer Reset -- -- 2.1 s 35 TBOR Brown-out Reset Pulse Width 100 -- -- s VDD VBOR (D005) * These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. DS39597B-page 96 2002 Microchip Technology Inc. PIC16F72 FIGURE 14-8: TIMER0 AND TIMER1 EXTERNAL CLOCK TIMINGS RA4/T0CKI 41 40 42 RC0/T1OSO/T1CKI 46 45 47 48 TMR0 or TMR1 Note: Refer to Figure 14-3 for load conditions. TABLE 14-4: Param No. 40* TIMER0 AND TIMER1 EXTERNAL CLOCK REQUIREMENTS Symbol Tt0H Characteristic T0CKI High Pulse Width No Prescaler With Prescaler 41* Tt0L T0CKI Low Pulse Width No Prescaler With Prescaler 42* Tt0P T0CKI Period No Prescaler With Prescaler 45* Tt1H 46* Tt1L 47* Tt1P T1CKI Input Period 48 Units 0.5 TCY + 20 -- -- ns 10 -- -- ns 0.5 TCY + 20 -- -- ns 10 -- -- ns Must also meet parameter 42 -- -- ns -- -- ns N = prescale value (2, 4, ..., 256) Must also meet parameter 47 -- ns -- -- ns 25 -- -- ns Asynchronous Standard(F) 30 -- -- ns Extended(LF) 50 -- -- ns 0.5 TCY + 20 -- -- ns Synchronous, Standard(F) Prescaler = 2,4,8 Extended(LF) 15 -- -- ns 25 -- -- ns Asynchronous Standard(F) 30 -- -- ns Extended(LF) 50 -- -- ns Standard(F) Greater of: 30 or TCY + 40 N -- -- ns Extended(LF) Greater of: 50 or TCY + 40 N Synchronous Must also meet parameter 42 TCY + 40 -- Synchronous, Prescaler = 1 Must also meet parameter 47 N = prescale value (1, 2, 4, 8) N = prescale value (1, 2, 4, 8) Standard(F) 60 -- -- Extended(LF) 100 -- -- ns DC -- 200 kHz 2 TOSC -- 7 TOSC -- Timer1 Oscillator Input Frequency Range (oscillator enabled by setting bit T1OSCEN) Conditions Greater of: 20 or TCY + 40 N 15 TCKEZtmr1 Delay from External Clock Edge to Timer Increment * Max 0.5 TCY + 20 Asynchronous Ft1 Typ Synchronous, Standard(F) Prescaler = 2,4,8 Extended(LF) T1CKI High Time Synchronous, Prescaler = 1 T1CKI Low Time Min ns These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. 2002 Microchip Technology Inc. DS39597B-page 97 PIC16F72 FIGURE 14-9: CAPTURE/COMPARE/PWM TIMINGS (CCP1 ) RC2/CCP1 (Capture Mode) 50 51 52 RC2/CCP1 (Compare or PWM Mode) 53 54 Note: Refer to Figure 14-3 for load conditions. TABLE 14-5: CAPTURE/COMPARE/PWM REQUIREMENTS (CCP1) Param Symbol No. 50* TccL Characteristic Min No Prescaler 0.5 TCY + 20 -- -- ns Standard(F) 10 -- -- ns Extended(LF) 20 -- -- ns CCP1 input high No Prescaler time Standard(F) With Prescaler Extended(LF) 0.5 TCY + 20 -- -- ns 10 -- -- ns 20 -- -- ns 3 TCY + 40 N -- -- ns -- 10 25 ns CCP1 input low time With Prescaler 51* TccH Typ Max Units 52* TccP CCP1 input period 53* TccR CCP1 output rise time Standard(F) Extended(LF) -- 25 50 ns 54* TccF CCP1 output fall time Standard(F) -- 10 25 ns Extended(LF) -- 25 45 ns * Conditions N = prescale value (1,4 or 16) These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. DS39597B-page 98 2002 Microchip Technology Inc. PIC16F72 FIGURE 14-10: SPI MASTER MODE TIMING (CKE = 0, SMP = 0) SS 70 SCK (CKP = 0) 71 72 78 79 79 78 SCK (CKP = 1) 80 Bit6 - - - - - -1 MSb SDO LSb 75, 76 SDI MSb In Bit6 - - - -1 LSb In 74 73 Note: Refer to Figure 14-3 for load conditions. FIGURE 14-11: SPI MASTER MODE TIMING (CKE = 1, SMP = 1) SS 81 SCK (CKP = 0) 71 72 79 73 SCK (CKP = 1) 80 78 SDO MSb Bit6 - - - - - -1 LSb Bit6 - - - -1 LSb In 75, 76 SDI MSb In 74 Note: Refer to Figure 14-3 for load conditions. 2002 Microchip Technology Inc. DS39597B-page 99 PIC16F72 FIGURE 14-12: SPI SLAVE MODE TIMING (CKE = 0) SS 70 SCK (CKP = 0) 83 71 72 78 79 79 78 SCK (CKP = 1) 80 MSb SDO LSb Bit6 - - - - - -1 77 75, 76 SDI MSb In Bit6 - - - -1 LSb In 74 73 Note: Refer to Figure 14-3 for load conditions. FIGURE 14-13: SPI SLAVE MODE TIMING (CKE = 1) 82 SS SCK (CKP = 0) 70 83 71 72 SCK (CKP = 1) 80 SDO MSb Bit6 - - - - - -1 LSb 75, 76 SDI MSb In 77 Bit6 - - - -1 LSb In 74 Note: Refer to Figure 14-3 for load conditions. DS39597B-page 100 2002 Microchip Technology Inc. PIC16F72 TABLE 14-6: Param No. SPI MODE REQUIREMENTS Symbol Characteristic Min Typ Max Units Conditions TCY -- -- ns 70* TssL2scH, TssL2scL SS to SCK or SCK input 71* TscH SCK input high time (Slave mode) TCY + 20 -- -- ns 72* TscL SCK input low time (Slave mode) TCY + 20 -- -- ns 73* TdiV2scH, TdiV2scL Setup time of SDI data input to SCK edge 100 -- -- ns 74* TscH2diL, TscL2diL Hold time of SDI data input to SCK edge 100 -- -- ns 75* TdoR SDO data output rise time -- -- 10 25 25 50 ns ns 76* TdoF SDO data output fall time -- 10 25 ns 77* TssH2doZ SS to SDO output hi-impedance 10 -- 50 ns 78* TscR SCK output rise time (Master mode) -- -- 10 25 25 50 ns ns 79* TscF SCK output fall time (Master mode) 80* TscH2doV, SDO data output valid after TscL2doV SCK edge 81* TdoV2scH, SDO data output setup to SCK edge TdoV2scL 82* TssL2doV 83* TscH2ssH, SS after SCK edge TscL2ssH * Standard(F) Extended(LF) Standard(F) Extended(LF) Standard(F) Extended(LF) SDO data output valid after SS edge -- 10 25 ns -- -- -- -- 50 145 ns ns TCY -- -- ns -- -- 50 ns 1.5 TCY + 40 -- -- ns These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. I2C BUS START/STOP BITS TIMING FIGURE 14-14: SCL 91 90 93 92 SDA START Condition STOP Condition Note: Refer to Figure 14-3 for load conditions. 2002 Microchip Technology Inc. DS39597B-page 101 PIC16F72 TABLE 14-7: Param No. 90* 91* 92* 93 * I2C BUS START/STOP BITS REQUIREMENTS Symbol TSU:STA THD:STA TSU:STO THD:STO Characteristic Min Typ Max Units START condition 100 kHz mode 4700 -- -- Setup time 400 kHz mode 600 -- -- START condition 100 kHz mode 4000 -- -- Hold time 400 kHz mode 600 -- -- STOP condition 100 kHz mode 4700 -- -- Setup time 400 kHz mode 600 -- -- STOP condition 100 kHz mode 4000 -- -- Hold time 400 kHz mode 600 -- -- Conditions ns Only relevant for Repeated START condition ns After this period, the first clock pulse is generated ns ns These parameters are characterized but not tested. FIGURE 14-15: I2C BUS DATA TIMING 103 102 100 101 SCL 90 106 107 91 92 SDA In 110 109 109 SDA Out Note: Refer to Figure 14-3 for load conditions. DS39597B-page 102 2002 Microchip Technology Inc. PIC16F72 TABLE 14-8: Param No. 100* I2C BUS DATA REQUIREMENTS Symbol THIGH Characteristic Clock High Time Min Max Units 100 kHz mode 4.0 -- s Device must operate at a minimum of 1.5 MHz 400 kHz mode 0.6 -- s Device must operate at a minimum of 10 MHz 1.5 TCY -- 100 kHz mode 4.7 -- s Device must operate at a minimum of 1.5 MHz 400 kHz mode 1.3 -- s Device must operate at a minimum of 10 MHz SSP Module 101* TLOW Clock Low Time 1.5 TCY -- -- 1000 ns 20 + 0.1 CB 300 ns 100 kHz mode -- 300 ns 400 kHz mode 20 + 0.1 CB 300 ns CB is specified to be from 10 - 400 pF Only relevant for Repeated START condition SSP Module 102* 103* 90* 91* 106* 107* 92* 109* 110* TR TF TSU:STA THD:STA THD:DAT TSU:DAT TSU:STO TAA TBUF CB SDA and SCL Rise 100 kHz mode Time 400 kHz mode SDA and SCL Fall Time START Condition Setup Time 100 kHz mode 4.7 -- s 400 kHz mode 0.6 -- s START Condition Hold Time 100 kHz mode 4.0 -- s 400 kHz mode 0.6 -- s Data Input Hold Time 100 kHz mode 0 -- ns 400 kHz mode 0 0.9 s Data Input Setup Time 100 kHz mode 250 -- ns 400 kHz mode 100 -- ns STOP Condition Setup Time Output Valid from Clock Bus Free Time Conditions 100 kHz mode 4.7 -- s 400 kHz mode 0.6 -- s 100 kHz mode -- 3500 ns 400 kHz mode -- -- ns 100 kHz mode 4.7 -- s 400 kHz mode 1.3 -- s -- 400 pF Bus Capacitive Loading CB is specified to be from 10 - 400 pF After this period, the first clock pulse is generated (Note 2) (Note 1) Time the bus must be free before a new transmission can start * These parameters are characterized but not tested. Note 1: As a transmitter, the device must provide this internal minimum delay time to bridge the undefined region (min. 300 ns) of the falling edge of SCL to avoid unintended generation of START or STOP conditions. 2: A Fast mode (400 kHz) I2C bus device can be used in a Standard mode (100 kHz) I2C bus system, but the requirement TSU:DAT 250 ns must then be met. This will automatically be the case if the device does not stretch the LOW period of the SCL signal. If such a device does stretch the LOW period of the SCL signal, it must output the next data bit to the SDA line TR max.+TSU:DAT = 1000 + 250 = 1250 ns (according to the Standard mode I2C bus specification), before the SCL line is released. 2002 Microchip Technology Inc. DS39597B-page 103 PIC16F72 TABLE 14-9: Param No. A01 A/D CONVERTER CHARACTERISTICS: PIC16F72 (INDUSTRIAL) PIC16LF72 (INDUSTRIAL) Sym NR Characteristic Resolution Min Typ Max Units Conditions PIC16F72 -- -- 8 bits bit VREF = VDD = 5.12V, VSS VAIN VREF PIC16LF72 -- -- 8 bits bit VREF = VDD = 2.2V A02 EABS Total Absolute Error -- -- <1 LSb VREF = VDD = 5.12V, VSS VAIN VREF A03 EIL Integral Linearity Error -- -- <1 LSb VREF = VDD = 5.12V, VSS VAIN VREF A04 EDL Differential Linearity Error -- -- <1 LSb VREF = VDD = 5.12V, VSS VAIN VREF A05 EFS Full Scale Error -- -- <1 LSb VREF = VDD = 5.12V, VSS VAIN VREF A06 EOFF Offset Error -- -- <1 LSb VREF = VDD = 5.12V, VSS VAIN VREF A10 -- Monotonicity (Note 3) -- guaranteed -- -- VSS VAIN VREF A20 VREF Reference Voltage 2.5 2.2 -- -- VDD+0.3 VDD+0.3 V V -40C to +85C 0C to +85C A25 VAIN Analog Input Voltage VSS - 0.3 -- VREF + 0.3 V A30 ZAIN Recommended Impedance of Analog Voltage Source -- -- 10.0 k A40 IAD A/D Conversion PIC16F72 Current (VDD) PIC16LF72 -- 180 -- A -- 90 -- A N/A -- -- -- 5 500 A A A50 IREF VREF input current (Note 2) Average current consumption when A/D is on (Note 1). During VAIN acquisition. During A/D Conversion cycle. * These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: When A/D is off, it will not consume any current other than minor leakage current. The power-down current spec includes any such leakage from the A/D module. 2: VREF current is from the RA3 pin or the VDD pin, whichever is selected as a reference input. 3: The A/D conversion result never decreases with an increase in the input voltage and has no missing codes. DS39597B-page 104 2002 Microchip Technology Inc. PIC16F72 FIGURE 14-16: A/D CONVERSION TIMING BSF ADCON0, GO 134 1 TCY (TOSC/2)(1) 131 Q4 130 A/D CLK 132 7 A/D DATA 6 5 4 3 2 1 0 NEW_DATA OLD_DATA ADRES ADIF GO DONE SAMPLING STOPPED SAMPLE Note 1: If the A/D clock source is selected as RC, a time of TCY is added before the A/D clock starts. This allows the SLEEP instruction to be executed. TABLE 14-10: A/D CONVERSION REQUIREMENTS Param Sym No. 130 TAD Characteristic A/D Clock Period TCNV 132 TACQ Acquisition Time 134 TGO Q4 to A/D Clock Start Typ Max Units Conditions PIC16F72 1.6 -- -- s TOSC based, VREF 3.0V PIC16LF72 2.0 -- -- s TOSC based, 2.0V VREF 5.5V PIC16F72 2.0 4.0 6.0 s A/D RC mode PIC16LF72 3.0 6.0 9.0 s A/D RC mode 9 -- 9 TAD 5* -- -- s The minimum time is the amplifier settling time. This may be used if the "new" input voltage has not changed by more than 1 LSb (i.e., 20.0 mV @ 5.12V) from the last sampled voltage (as stated on CHOLD). TOSC/2 -- -- If the A/D clock source is selected as RC, a time of TCY is added before the A/D clock starts. This allows the SLEEP instruction to be executed. Conversion Time (not including S/H time) (Note 1) 131 Min -- * These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: ADRES register may be read on the following TCY cycle. 2002 Microchip Technology Inc. DS39597B-page 105 PIC16F72 NOTES: DS39597B-page 106 2002 Microchip Technology Inc. PIC16F72 15.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES Note: The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore, outside the warranted range. "Typical" represents the mean of the distribution at 25C. "Maximum" or "minimum" represents (mean + 3) or (mean - 3) respectively, where is a standard deviation, over the whole temperature range. FIGURE 15-1: TYPICAL IDD vs. FOSC OVER VDD (HS MODE) 6 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 5 5.5 V 5.0 V 4 IDD (mA) 4.5 V 4.0 V 3 2 3.5 V 3.0 V 1 2.5 V 2.0 V 0 4 6 8 10 12 14 16 18 20 F O S C (M H z ) MAXIMUM IDD vs. FOSC OVER VDD (HS MODE) FIGURE 15-2: 8 7 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 6 5 .5 V 5 .0 V IDD (mA) 5 4 .5 V 4 4 .0 V 3 2 3 .5 V 3 .0 V 1 2 .5 V 2 .0 V 0 4 6 8 10 12 14 16 18 20 F O S C (M H z ) 2002 Microchip Technology Inc. DS39597B-page 107 PIC16F72 FIGURE 15-3: TYPICAL IDD vs. FOSC OVER VDD (XT MODE) 0.9 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 0.8 5.5V 0.7 5.0V 0.6 IDD (mA) 4.5V 0.5 4.0V 3.5V 0.4 3.0V 0.3 2.5V 2.0V 0.2 0.1 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 3.5 4.0 FOSC (MHz) FIGURE 15-4: MAXIMUM IDD vs. FOSC OVER VDD (XT MODE) 1.2 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 1.0 5.5V 5.0V 0.8 IDD (mA) 4.5V 0.6 4.0V 3.5V 3.0V 0.4 2.5V 2.0V 0.2 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 FOSC (MHz) DS39597B-page 108 2002 Microchip Technology Inc. PIC16F72 FIGURE 15-5: TYPICAL IDD vs. FOSC OVER VDD (LP MODE) 55 IDD (A) 50 45 5.5V 40 5.0V 35 4.5V 4.0V 30 3.5V 25 3.0V 20 2.5V 2.0V 15 10 30 40 50 60 70 80 90 80 90 100 FOSC (kHz) FIGURE 15-6: MAXIMUM IDD vs. FOSC OVER VDD (LP MODE) 100 90 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 5.5V 80 5.0V 70 IDD (A) 4.5V 60 4.0V 50 3.5V 40 3.0V 2.5V 30 2.0V 20 30 40 50 60 70 100 FOSC (kHz) 2002 Microchip Technology Inc. DS39597B-page 109 PIC16F72 FIGURE 15-7: AVERAGE FOSC vs. VDD FOR VARIOUS VALUES OF R (RC MODE, C = 20 pF, 25C) 5.0 4.5 Operation above 4 MHz is not recomended 4.0 3.5 10 k Freq (MHz) 3.0 2.5 2.0 1.5 1.0 100 k 0.5 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) FIGURE 15-8: AVERAGE FOSC vs. VDD FOR VARIOUS VALUES OF R (RC MODE, C = 100 pF, 25C) 5.0 Operation above 4 MHz is not recomended 4.0 5.1 k Freq (MHz) 3.0 10 k 2.0 1.0 100 k 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) DS39597B-page 110 2002 Microchip Technology Inc. PIC16F72 FIGURE 15-9: AVERAGE FOSC vs. VDD FOR VARIOUS VALUES OF R (RC MODE, C = 300 pF, 25C) 300 250 3.3 k 200 Freq (kHz) 5.1 k 150 10 k 100 50 100 k 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) FIGURE 15-10: IPD vs. VDD (SLEEP MODE, ALL PERIPHERALS DISABLED) 100 Max 125C 10 IPD (uA) Max 85C 1 Typ 25C 0.1 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 0.01 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) 2002 Microchip Technology Inc. DS39597B-page 111 PIC16F72 FIGURE 15-11: IBOR vs. VDD OVER TEMPERATURE 1,000 Max (125C) Typ (25C) Device in SLEEP Indeterminant State IDD (A) Device in RESET 100 Note: Device current in RESET depends on Oscillator mode, frequency and circuit. Max (125C) Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) Typ (25C) 10 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 5.0 5.5 VDD (V) FIGURE 15-12: TYPICAL AND MAXIMUM IWDT vs. VDD OVER TEMPERATURE 100 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) Max (125C) IWDT (A) 10 Typ (25C) 1 0.1 2.0 2.5 3.0 3.5 4.0 4.5 VDD (V) DS39597B-page 112 2002 Microchip Technology Inc. PIC16F72 FIGURE 15-13: TYPICAL, MINIMUM AND MAXIMUM WDT PERIOD vs. VDD (-40C TO +125C) 50 45 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 40 35 WDT Period (ms) Max (125C) 30 25 Typ (25C) 20 Min (-40C) 15 10 5 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) FIGURE 15-14: AVERAGE WDT PERIOD vs. VDD OVER TEMPERATURE (-40C TO +125C) 50 45 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 40 125C 35 WDT Period (ms) 85C 30 25C 25 20 -40C 15 10 5 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) 2002 Microchip Technology Inc. DS39597B-page 113 PIC16F72 FIGURE 15-15: TYPICAL, MINIMUM AND MAXIMUM VOH vs. IOH (VDD = 5V, -40C TO +125C) 5.5 5.0 4.5 4.0 Max 3.5 VOH (V) Typ (25C) 3.0 2.5 Min 2.0 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 1.5 1.0 0.5 0.0 0 5 10 15 20 25 IOH (-mA) FIGURE 15-16: TYPICAL, MINIMUM AND MAXIMUM VOH vs. IOH (VDD = 3V, -40C TO +125C) 3.5 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 3.0 2.5 Max VOH (V) 2.0 Typ (25C) 1.5 Min 1.0 0.5 0.0 0 5 10 15 20 25 IOH (-mA) DS39597B-page 114 2002 Microchip Technology Inc. PIC16F72 FIGURE 15-17: TYPICAL, MINIMUM AND MAXIMUM VOL vs. IOL (VDD = 5V, -40C TO +125C) 1.0 0.9 Max (125C) Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 0.8 0.7 Max (85C) VOL (V) 0.6 0.5 Typ (25C) 0.4 0.3 Min (-40C) 0.2 0.1 0.0 0 5 10 15 20 25 IOL (-mA) FIGURE 15-18: TYPICAL, MINIMUM AND MAXIMUM VOL vs. IOL (VDD = 3V, -40C TO +125C) 3.0 Max (125C) Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 2.5 VOL (V) 2.0 1.5 Max (85C) 1.0 Typ (25C) 0.5 Min (-40C) 0.0 0 5 10 15 20 25 IOL (-mA) 2002 Microchip Technology Inc. DS39597B-page 115 PIC16F72 FIGURE 15-19: MINIMUM AND MAXIMUM VIN vs. VDD, (TTL INPUT, -40C TO +125C) 1.5 1.4 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 1.3 VTH Max (-40C) 1.2 1.1 VIN (V) VTH Typ (25C) 1.0 VTH Min (125C) 0.9 0.8 0.7 0.6 0.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) FIGURE 15-20: MINIMUM AND MAXIMUM VIN vs. VDD (ST INPUT, -40C TO +125C) 4.0 Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C) 3.5 VIH Max (125C) 3.0 VIN (V) 2.5 VIH Min (-40C) 2.0 VIL Max (-40C) 1.5 1.0 VIL Min (125C) 0.5 0.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) DS39597B-page 116 2002 Microchip Technology Inc. PIC16F72 16.0 PACKAGE MARKING INFORMATION 28-Lead PDIP (Skinny DIP) Example PIC16F72-I/SP XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX YYWWNNN 28-Lead SOIC Example XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX YYWWNNN 28-Lead SSOP 28-Lead QFN 0210017 PIC16F72 -I/SS 0220017 Example 1 1 XXXXXXXX XXXXXXXX YYWWNNN PIC16F72 -I/ML 0210017 Legend: * PIC16F72-I/SO Example XXXXXXXXXXXX XXXXXXXXXXXX YYWWNNN Note: 0217017 XX...X Y YY WW NNN Customer specific information* Year code (last digit of calendar year) Year code (last 2 digits of calendar year) Week code (week of January 1 is week `01') Alphanumeric traceability code In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line thus limiting the number of available characters for customer specific information. Standard PICmicro device marking consists of Microchip part number, year code, week code, and traceability code. For PICmicro device marking beyond this, certain price adders apply. Please check with your Microchip Sales Office. For QTP devices, any special marking adders are included in QTP price. 2002 Microchip Technology Inc. DS39597B-page 117 PIC16F72 28-Lead Skinny Plastic Dual In-line (SP) - 300 mil (PDIP) E1 D 2 n 1 E A2 A L c B1 A1 eB Units Number of Pins Pitch p B Dimension Limits n p INCHES* MIN NOM MILLIMETERS MAX MIN NOM 28 MAX 28 .100 2.54 Top to Seating Plane A .140 .150 .160 3.56 3.81 4.06 Molded Package Thickness A2 .125 .130 .135 3.18 3.30 3.43 8.26 Base to Seating Plane A1 .015 Shoulder to Shoulder Width E .300 .310 .325 7.62 7.87 Molded Package Width E1 .275 .285 .295 6.99 7.24 7.49 Overall Length D 1.345 1.365 1.385 34.16 34.67 35.18 Tip to Seating Plane L c .125 .130 .135 3.18 3.30 3.43 .008 .012 .015 0.20 0.29 0.38 B1 .040 .053 .065 1.02 1.33 1.65 Lead Thickness Upper Lead Width Lower Lead Width Overall Row Spacing Mold Draft Angle Top Mold Draft Angle Bottom 0.38 B .016 .019 .022 0.41 0.48 0.56 eB .320 .350 .430 8.13 8.89 10.92 5 10 15 5 10 15 5 10 15 5 10 15 * Controlling Parameter Significant Characteristic Notes: Dimension D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side. JEDEC Equivalent: MO-095 Drawing No. C04-070 DS39597B-page 118 2002 Microchip Technology Inc. PIC16F72 28-Lead Plastic Small Outline (SO) - Wide, 300 mil (SOIC) E E1 p D B 2 1 n h 45 c A2 A L Units Dimension Limits n p Number of Pins Pitch Overall Height Molded Package Thickness Standoff Overall Width Molded Package Width Overall Length Chamfer Distance Foot Length Foot Angle Top Lead Thickness Lead Width Mold Draft Angle Top Mold Draft Angle Bottom * Controlling Parameter Significant Characteristic A A2 A1 E E1 D h L c B A1 MIN .093 .088 .004 .394 .288 .695 .010 .016 0 .009 .014 0 0 INCHES* NOM 28 .050 .099 .091 .008 .407 .295 .704 .020 .033 4 .011 .017 12 12 MAX .104 .094 .012 .420 .299 .712 .029 .050 8 .013 .020 15 15 MILLIMETERS NOM 28 1.27 2.36 2.50 2.24 2.31 0.10 0.20 10.01 10.34 7.32 7.49 17.65 17.87 0.25 0.50 0.41 0.84 0 4 0.23 0.28 0.36 0.42 0 12 0 12 MIN MAX 2.64 2.39 0.30 10.67 7.59 18.08 0.74 1.27 8 0.33 0.51 15 15 Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side. JEDEC Equivalent: MS-013 Drawing No. C04-052 2002 Microchip Technology Inc. DS39597B-page 119 PIC16F72 28-Lead Plastic Shrink Small Outline (SS) - 209 mil, 5.30 mm (SSOP) E E1 p D B 2 1 n A c A2 A1 L Units Dimension Limits n p Number of Pins Pitch Overall Height Molded Package Thickness Standoff Overall Width Molded Package Width Overall Length Foot Length Lead Thickness Foot Angle Lead Width Mold Draft Angle Top Mold Draft Angle Bottom * Controlling Parameter Significant Characteristic A A2 A1 E E1 D L c B MIN .068 .064 .002 .299 .201 .396 .022 .004 0 .010 0 0 INCHES NOM 28 .026 .073 .068 .006 .309 .207 .402 .030 .007 4 .013 5 5 MAX .078 .072 .010 .319 .212 .407 .037 .010 8 .015 10 10 MILLIMETERS* NOM MAX 28 0.65 1.73 1.85 1.98 1.63 1.73 1.83 0.05 0.15 0.25 7.59 7.85 8.10 5.11 5.25 5.38 10.06 10.20 10.34 0.56 0.75 0.94 0.10 0.18 0.25 0.00 101.60 203.20 0.25 0.32 0.38 0 5 10 0 5 10 MIN Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side. JEDEC Equivalent: MS-150 Drawing No. C04-073 DS39597B-page 120 2002 Microchip Technology Inc. PIC16F72 28-Lead Plastic Quad Flat No Leads Package (ML) 6x6 mm Body (QFN) EXPOSED METAL PADS E E1 Q D1 D D2 p 2 1 B n R E2 CH x 45 L TOP VIEW BOTTOM VIEW A2 A A1 A3 Units Dimension Limits Number of Pins INCHES MIN n MILLIMETERS* NOM MAX MIN 28 MAX NOM 28 Pitch p Overall Height A .033 .039 0.85 1.00 Molded Package Thickness A2 .026 .031 0.65 0.80 Standoff A1 .0004 .002 0.01 0.05 Base Thickness A3 .008 REF. 0.20 REF. 6.00 BSC .026 BSC .000 E .236 BSC Molded Package Width E1 .226 BSC Exposed Pad Width E2 Overall Width Overall Length .140 .146 0.65 BSC 0.00 5.75 BSC .152 3.55 .236 BSC D 3.70 3.85 6.00 BSC .226 BSC 5.75 BSC Molded Package Length D1 Exposed Pad Length D2 .140 .146 .152 3.55 3.70 Lead Width B .009 .011 .014 0.23 0.28 0.35 Lead Length L .020 .024 .030 0.50 0.60 0.75 3.85 Tie Bar Width R .005 .007 .010 0.13 0.17 0.23 Tie Bar Length Q .012 .016 .026 0.30 0.40 0.65 CH .009 .017 .024 0.24 0.42 0.60 Chamfer Mold Draft Angle Top 12 12 * Controlling Parameter Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side. JEDEC equivalent: pending Drawing No. C04-114 2002 Microchip Technology Inc. DS39597B-page 121 PIC16F72 28-Lead Plastic Quad Flat No Leads Package (ML) 6x6 mm Body (QFN) (Continued) M B L M p PACKAGE EDGE SOLDER MASK Units Pitch Dimension Limits p INCHES MIN NOM MILLIMETERS* MAX NOM MIN MAX 0.65 BSC .026 BSC Pad Width B .009 .011 .014 0.23 0.28 0.35 Pad Length L .020 .024 .030 0.50 0.60 0.75 Pad to Solder Mask M .005 .006 0.13 0.15 *Controlling Parameter Drawing No. C04-2114 DS39597B-page 122 2002 Microchip Technology Inc. PIC16F72 APPENDIX A: REVISION HISTORY Version Date Revision Description A April 2002 This is a new data sheet. However, this device is similar to the PIC16C72 device found in the PIC16C7X Data Sheet (DS30390), the PIC16C72A Data Sheet (DS35008) or the PIC16F872 device (DS30221). B May 2002 Final data sheet. Includes device characterization data. Minor typographic revisions throughout. APPENDIX B: CONVERSION CONSIDERATIONS Considerations for converting from previous versions of devices to the ones listed in this data sheet are listed in Table B-1. TABLE B-1: CONVERSION CONSIDERATIONS Characteristic PIC16C72/72A PIC16F872 PIC16F72 Pins 28 28 28 Timers 3 3 3 Interrupts 8 10 8 Communication Basic SSP/SSP (SPI, I2C Slave) MSSP (SPI, I2C Master/Slave) SSP (SPI, I2C Slave) Frequency 20 MHz 20 MHz 20 MHz A/D 8-bit, 5 Channels 10-bit, 5 Channels 8-bit, 5 Channels CCP 1 1 1 Program Memory 2K EPROM 2K FLASH (1,000 E/W cycles) 2K FLASH (1000 E/W cycles) RAM 128 bytes 128 bytes 128 bytes EEPROM Data None 64 bytes None Other -- In-Circuit Debugger, Low Voltage Programming -- 2002 Microchip Technology Inc. DS39597B-page 123 PIC16F72 NOTES: DS39597B-page 124 2002 Microchip Technology Inc. PIC16F72 INDEX A C A/D Capture/Compare/PWM ..................................................... 37 Associated Registers with PWM and Timer2.............. 42 Associated Registers, Capture, Compare and Timer1............................................................. 40 Capture CCP1IF............................................................... 38 CCPR1 ............................................................... 38 CCPR1H:CCPR1L.............................................. 38 Capture Mode............................................................. 38 CCP Mode Timer Resources...................................... 37 CCP Pin Configuration ......................................... 38, 39 CCP Prescaler............................................................ 38 CCPR1L Register ....................................................... 37 Compare Mode ........................................................... 39 PWM Mode................................................................. 41 PWM, Example Frequencies/Resolutions .................. 42 Software Interrupt ....................................................... 38 Software Interrupt Mode ............................................. 39 Special Event Trigger and A/D Conversions .............. 39 Special Event Trigger Output of CCP1 ....................... 39 Timer1 Mode Selection......................................... 38, 39 CCPR1H Register............................................................... 37 CCPxM0 bit......................................................................... 37 CCPxM1 bit......................................................................... 37 CCPxM2 bit......................................................................... 37 CCPxM3 bit......................................................................... 37 CCPxX bit ........................................................................... 37 CCPxY bit ........................................................................... 37 CKE .................................................................................... 44 CKP .................................................................................... 45 Clock Polarity Select bit, CKP............................................. 45 Code Examples Changing Between Capture Prescalers ..................... 38 FLASH Program Read................................................ 28 Indirect Addressing..................................................... 19 Initializing PORTA....................................................... 21 Initializing PORTB ...................................................... 23 Initializing PORTC ...................................................... 25 Saving STATUS, W and PCLATH Registers in RAM................................................... 69 Code Protection ............................................................ 59, 72 Configuration Bits ............................................................... 59 Configuration Word............................................................. 60 Conversion Considerations............................................... 123 Acquisition Requirements ........................................... 56 ADCON0 Register....................................................... 53 ADCON1 Register....................................................... 53 ADIF bit ....................................................................... 54 ADRES Register ......................................................... 53 Analog-to-Digital Converter......................................... 53 Associated Registers .................................................. 57 Configuring Analog Port Pins...................................... 56 Configuring the Interrupt ............................................. 54 Configuring the Module............................................... 54 Conversion Clock........................................................ 56 Conversions ................................................................ 56 Converter Characteristics ......................................... 104 Effects of a RESET ..................................................... 57 Internal Sampling Switch (Rss) Impedance ................ 56 Operation During SLEEP ............................................ 57 Source Impedance...................................................... 56 Use of the the CCP Trigger......................................... 57 Absolute Maximum Ratings ................................................ 87 ACK..................................................................................... 49 ADCON0 GO/DONE bit ...................................................... 54 ADRES Register ............................................................. 9, 54 Application Notes AN546 (Using the Analog-to-Digital Converter) .......... 53 AN552 (Implementing Wake-up on Key Strokes Using PIC16F7X) ............................... 23 AN556 (Implementing a Table Read).......................... 19 AN578 (Use of the SSP Module in the I2C Multi-Master Environment)............................... 43 AN607 (Power-up Trouble Shooting) .......................... 64 Assembler MPASM Assembler ..................................................... 81 B BF ....................................................................................... 44 Block Diagrams A/D .............................................................................. 55 Analog Input Model ..................................................... 55 Capture Mode Operation ............................................ 38 Compare Mode Operation .......................................... 39 In-Circuit Serial Programming Connections................ 72 Interrupt Logic ............................................................. 68 On-Chip Reset Circuit ................................................. 63 PIC16F72...................................................................... 5 PORTC ....................................................................... 25 PWM ........................................................................... 41 RA3:RA0 and RA5 Port Pins ...................................... 21 RA4/T0CKI Pin............................................................ 21 RB3:RB0 Port Pins ..................................................... 23 RB7:RB4 Port Pins ..................................................... 23 Recommended MCLR Circuit ..................................... 63 SSP in I2C Mode......................................................... 48 SSP in SPI Mode ........................................................ 46 Timer0/WDT Prescaler................................................ 29 Timer1 ......................................................................... 32 Timer2 ......................................................................... 35 Watchdog Timer (WDT) .............................................. 70 BOR. See Brown-out Reset Brown-out Reset (BOR) .................................... 59, 62, 65, 66 Buffer Full Status bit, BF ..................................................... 44 2002 Microchip Technology Inc. D D/A...................................................................................... 44 Data Memory General Purpose Register File ..................................... 7 Special Function Registers........................................... 9 Data/Address bit, D/A ......................................................... 44 DC and AC Characteristics Graphs and Tables ................................................... 107 DC Characteristics.............................................................. 89 Development Support ......................................................... 81 Device Overview................................................................... 5 Direct Addressing ............................................................... 20 E Electrical Characteristics .................................................... 87 Errata .................................................................................... 3 DS39597B-page 125 PIC16F72 F FLASH Program Memory Associated Registers .................................................. 28 Operation During Code Protect................................... 28 Reading....................................................................... 28 FSR Register................................................................... 9, 10 I I/O Ports .............................................................................. 21 PORTA ........................................................................ 21 PORTB........................................................................ 23 PORTC........................................................................ 25 I2C Associated Registers .................................................. 51 Master Mode ............................................................... 51 Mode Selection ........................................................... 48 Multi-Master Mode ...................................................... 51 SCL and SDA pins ...................................................... 48 Slave Mode ................................................................. 48 ICEPIC In-Circuit Emulator ................................................. 82 ID Locations ........................................................................ 72 In-Circuit Serial Programming (ICSP) ................................. 72 INDF Register ..................................................................... 10 Indirect Addressing ............................................................. 20 FSR Register .............................................................. 19 INDF Register ............................................................. 19 Instruction Format ............................................................... 73 Instruction Set ..................................................................... 73 ADDLW ....................................................................... 75 ADDWF ....................................................................... 75 ANDLW ....................................................................... 75 ANDWF ....................................................................... 75 BCF ............................................................................. 75 BSF ............................................................................. 75 BTFSC ........................................................................ 76 BTFSS ........................................................................ 76 CALL ........................................................................... 76 CLRF........................................................................... 76 CLRW.......................................................................... 76 CLRWDT..................................................................... 76 COMF ......................................................................... 77 DECF .......................................................................... 77 DECFSZ...................................................................... 77 GOTO.......................................................................... 77 INCF............................................................................ 77 INCFSZ ....................................................................... 77 IORLW......................................................................... 78 IORWF ........................................................................ 78 MOVF.......................................................................... 78 MOVLW....................................................................... 78 MOVWF ...................................................................... 78 NOP ............................................................................ 78 RETFIE ....................................................................... 79 RETLW........................................................................ 79 RETURN ..................................................................... 79 RLF ............................................................................. 79 RRF............................................................................. 79 SLEEP ........................................................................ 79 SUBLW........................................................................ 80 SUBWF ....................................................................... 80 Summary Table ........................................................... 74 SWAPF ....................................................................... 80 XORLW ....................................................................... 80 XORWF....................................................................... 80 DS39597B-page 126 INT Interrupt (RB0/INT). See Interrupt Sources INTCON Register GIE bit......................................................................... 14 INTE bit....................................................................... 14 INTF bit ....................................................................... 14 RBIF bit....................................................................... 14 TMR0IE bit.................................................................. 14 Internal Sampling Switch (Rss) Impedance........................ 56 Interrupt Sources .......................................................... 59, 68 RB0/INT Pin, External................................................. 69 TMR0 Overflow........................................................... 69 Interrupts RB7:RB4 Port Change................................................ 23 Synchronous Serial Port Interrupt............................... 16 Interrupts, Context Saving During....................................... 69 Interrupts, Enable Bits Global Interrupt Enable (GIE bit) .......................... 14, 68 Interrupt-on-Change (RB7:RB4) Enable (RBIE bit) ................................................... 69 RB0/INT Enable (INTE bit) ......................................... 14 TMR0 Overflow Enable (TMR0IE bit) ......................... 14 Interrupts, Flag bits Interrupt-on-Change (RB7:RB4) Flag (RBIF bit) ............................................................... 14 Interrupt-on-Change (RB7:RB4) Flag (RBIF bit) ......................................................... 14, 69 RB0/INT Flag (INTF bit).............................................. 14 TMR0 Overflow Flag (TMR0IF bit).............................. 69 K KEELOQ Evaluation and Programming Tools ...................... 84 L Loading of PC ..................................................................... 18 M Master Clear (MCLR) MCLR Reset, Normal Operation..................... 62, 65, 66 MCLR Reset, SLEEP...................................... 62, 65, 66 Operation and ESD Protection ................................... 63 Memory Data Memory ................................................................ 7 Program Memory .......................................................... 7 MPLAB C17 and MPLAB C18 C Compilers ....................... 81 MPLAB ICD In-Circuit Debugger ........................................ 83 MPLAB ICE High Performance Universal In-Circuit Emulator with MPLAB IDE ............................ 82 MPLAB Integrated Development Environment Software .................................................. 81 MPLINK Object Linker/MPLIB Object Librarian .................. 82 O On-Line Support ............................................................... 131 OPCODE Field Descriptions............................................... 73 OPTION_REG Register INTEDG bit ................................................................. 13 PS2:PS0 bits............................................................... 13 PSA bit........................................................................ 13 RBPU bit ..................................................................... 13 T0CS bit...................................................................... 13 T0SE bit ...................................................................... 13 2002 Microchip Technology Inc. PIC16F72 Oscillator Configuration................................................. 59, 61 Crystal Oscillator/Ceramic Resonators ....................... 61 HS ......................................................................... 61, 65 LP.......................................................................... 61, 65 RC................................................................... 61, 62, 65 XT ......................................................................... 61, 65 Oscillator, WDT ................................................................... 70 P P.......................................................................................... 44 Package Marking Information ........................................... 117 PCFG0 bit ........................................................................... 54 PCFG1 bit ........................................................................... 54 PCFG2 bit ........................................................................... 54 PCL Register............................................................. 9, 10, 18 PCLATH Register ..................................................... 9, 10, 18 PCON Register ................................................................... 64 POR bit ....................................................................... 17 PICDEM 1 Low Cost PICmicro Demonstration Board.................................................... 83 PICDEM 17 Demonstration Board ...................................... 84 PICDEM 2 Low Cost PIC16CXX Demonstration Board.................................................... 83 PICDEM 3 Low Cost PIC16CXXX Demonstration Board.................................................... 84 PICSTART Plus Entry Level Development Programmer ........................................... 83 Pin Functions MCLR/VPP..................................................................... 6 OSC1/CLKI ................................................................... 6 OSC2/CLKO ................................................................. 6 RA0/AN0 ....................................................................... 6 RA1/AN1 ....................................................................... 6 RA2/AN2 ....................................................................... 6 RA3/AN3/VREF .............................................................. 6 RA4/T0CKI.................................................................... 6 RA5/AN4/SS ................................................................. 6 RB0/INT ........................................................................ 6 RB1 ............................................................................... 6 RB2 ............................................................................... 6 RB3 ............................................................................... 6 RB4 ............................................................................... 6 RB5 ............................................................................... 6 RB6/PGC ...................................................................... 6 RB7/PGD ...................................................................... 6 RC0/T1OSO/T1CKI ...................................................... 6 RC1/T1OSI ................................................................... 6 RC2/CCP1 .................................................................... 6 RC3/SCK/SCL .............................................................. 6 RC4/SDI/SDA ............................................................... 6 RC5/SDO ...................................................................... 6 RC6............................................................................... 6 RC7............................................................................... 6 VDD ............................................................................... 6 VSS ................................................................................ 6 Pinout Descriptions PIC16F72...................................................................... 6 POP .................................................................................... 19 POR. See Power-on Reset PORTA Associated Registers .................................................. 22 Functions .................................................................... 22 2002 Microchip Technology Inc. PORTA Register ................................................................... 9 PORTB Associated Registers.................................................. 24 Functions .................................................................... 24 Pull-up Enable (RBPU bit) .......................................... 13 RB0/INT Edge Select (INTEDG bit)............................ 13 RB0/INT Pin, External ................................................ 69 RB7:RB4 Interrupt-on-Change Flag (RBIF bit)........... 14 RB7:RB4 Interrupt-on-Change ................................... 69 RB7:RB4 Interrupt-on-Change Enable (RBIE bit) ............................................................... 69 RB7:RB4 Interrupt-on-Change Flag (RBIF bit) ......................................................... 14, 69 PORTB Register ................................................................... 9 PORTC Associated Registers.................................................. 26 Functions .................................................................... 26 PORTC Register................................................................... 9 Postscaler, WDT Assignment (PSA Bit) ................................................. 13 Rate Select (PS2:PS0 bits) ........................................ 13 Power-down Mode. See SLEEP Power-on Reset (POR)............................... 59, 62, 64, 65, 66 Brown-out Reset (BOR).............................................. 64 Oscillator Start-up Timer (OST) ............................ 59, 64 POR Status (POR bit)................................................. 17 Power Control/Status Register (PCON)...................... 64 Power-down (PD bit) .................................................. 62 Power-up Timer (PWRT) ...................................... 59, 64 Time-out (TO bit) .................................................. 12, 62 Time-out Sequence .................................................... 64 PR2 Register ...................................................................... 35 Prescaler, Timer0 Assignment (PSA bit) ................................................. 13 Rate Select (PS2:PS0 bits) ........................................ 13 PRO MATE II Universal Device Programmer ..................... 83 Product Identification System ........................................... 133 Program Counter RESET Conditions...................................................... 65 Program Memory Paging ........................................................................ 19 Program Memory Map and Stack ......................................... 7 Program Verification ........................................................... 72 PUSH.................................................................................. 19 R R/W..................................................................................... 44 R/W bit ................................................................................ 49 RBIF bit............................................................................... 23 Read/Write bit Information, R/W ......................................... 44 Reader Response............................................................. 132 Reading Program Memory.................................................. 27 PMADR....................................................................... 27 PMCON1 Register...................................................... 27 Receive Overflow Indicator bit, SSPOV.............................. 45 Register File Map.................................................................. 8 DS39597B-page 127 PIC16F72 Registers ............................................................................. 36 ADCON0 (A/D Control 0) ............................................ 53 ADCON1 (A/D Control 1) ............................................ 54 CCPCON1 (Capture/Compare/PWM Control 1) ......... 37 Initialization Conditions (table) .................................... 66 INTCON (Interrupt Control) ......................................... 14 OPTION ...................................................................... 13 PCON (Power Control) ............................................... 17 PIE1 (Peripheral Interrupt Enable 1) ........................... 15 PIR1 (Peripheral Interrupt Flag 1) ............................... 16 PMCON1 (Program Memory Control 1) ...................... 27 SSPCON (Sync Serial Port Control) ........................... 45 SSPSTAT (Synchronous Serial Port Status) ............... 44 STATUS ...................................................................... 12 Summary....................................................................... 9 T1CON (Timer1 Control) ............................................. 31 RESET .......................................................................... 59, 62 Brown-out Reset (BOR). See Brown-out Reset (BOR) MCLR RESET. See MCLR Power-on Reset (POR). See Power-on Reset (POR) RESET Conditions for All Registers............................ 66 RESET Conditions for PCON Register ....................... 65 RESET Conditions for Program Counter .................... 65 RESET Conditions for STATUS Register .................... 65 WDT Reset. See Watchdog Timer (WDT) Revision History ................................................................ 123 RP0, RP1 bit ......................................................................... 7 S S.......................................................................................... 44 Sales and Support............................................................. 133 Slave Mode SCL ............................................................................. 48 SDA............................................................................. 48 SLEEP..................................................................... 59, 62, 71 SMP .................................................................................... 44 Software Simulator (MPLAB SIM)....................................... 82 Special Event Trigger.......................................................... 57 Special Features of the CPU............................................... 59 Special Function Registers PMADRH .................................................................... 27 PMADRL ..................................................................... 27 PMCON1..................................................................... 27 PMDATH ..................................................................... 27 PMDATL...................................................................... 27 SPI Associated Registers .................................................. 46 SPI Clock Edge Select bit, CKE.......................................... 44 SPI Data Input Sample Phase Select bit, SMP................... 44 SPI Mode Serial Clock ................................................................. 43 Serial Data In .............................................................. 43 Serial Data Out............................................................ 43 Slave Select ................................................................ 43 SSP ACK............................................................................. 48 Addressing .................................................................. 48 BF bit........................................................................... 48 I2C Mode Operation .................................................... 48 R/W bit ........................................................................ 49 Reception .................................................................... 49 SCL Clock Input .......................................................... 48 SSPOV bit ................................................................... 48 Transmission............................................................... 49 DS39597B-page 128 SSPADD Register............................................................... 10 SSPEN................................................................................ 45 SSPIF ................................................................................. 16 SSPM3:SSPM0 .................................................................. 45 SSPOV ............................................................................... 45 SSPSTAT Register ............................................................. 10 Stack................................................................................... 19 Overflows.................................................................... 19 Underflow ................................................................... 19 START bit, S....................................................................... 44 STATUS Register DC bit.......................................................................... 12 IRP bit ......................................................................... 12 PD bit .......................................................................... 62 TO bit .................................................................... 12, 62 STOP bit, P......................................................................... 44 Synchronous Serial Port (SSP) .......................................... 43 Overview..................................................................... 43 SPI Mode .................................................................... 43 Synchronous Serial Port Enable bit, SSPEN...................... 45 Synchronous Serial Port Interrupt....................................... 16 Synchronous Serial Port Mode Select bits, SSPM3:SSPM0 ............................................................ 45 T T2CKPS0 bit ....................................................................... 36 T2CKPS1 bit ....................................................................... 36 T2CON (Timer2 Control) .................................................... 36 TAD...................................................................................... 56 Timer0................................................................................. 29 Clock Source Edge Select (T0SE bit)......................... 13 Clock Source Select (T0CS bit) .................................. 13 External Clock............................................................. 30 Interrupt ...................................................................... 29 Operation .................................................................... 29 Overflow Enable (TMR0IE bit) .................................... 14 Overflow Flag (TMR0IF bit) ........................................ 69 Overflow Interrupt ....................................................... 69 Prescaler .................................................................... 30 T0CKI ......................................................................... 30 Timer1 Associated Registers .................................................. 34 Asynchronous Counter Mode ..................................... 33 Capacitor Selection..................................................... 33 Counter Operation ...................................................... 32 Interrupt ...................................................................... 33 Operation in Timer Mode ............................................ 32 Oscillator..................................................................... 33 Prescaler .................................................................... 34 Resetting TMR1H, TMR1L Register Pair.................... 34 Resetting Using a CCP Trigger Output....................... 33 Synchronized Counter Mode ...................................... 32 Timer2................................................................................. 35 Interrupt ...................................................................... 35 Operation .................................................................... 35 Output ......................................................................... 35 Prescaler, Postscaler .................................................. 35 2002 Microchip Technology Inc. PIC16F72 Timing Diagrams A/D Conversion......................................................... 105 Brown-out Reset ......................................................... 96 Capture/Compare/PWM (CCP1)................................. 98 CLKO and I/O ............................................................. 95 External Clock............................................................. 94 I2C Bus Data ............................................................. 102 I2C Bus START/STOP bits........................................ 101 I2C Reception (7-bit Address) ..................................... 50 I2C Transmission (7-bit Address) ................................ 50 RESET, Watchdog Timer, Oscillator Start-up Timer and Power-up Timer............................................... 96 Slow Rise Time (MCLR Tied to VDD Through RC Network)........................................................... 68 SPI Master Mode ........................................................ 47 SPI Master Mode (CKE = 0, SMP = 0) ....................... 99 SPI Master Mode (CKE = 1, SMP = 1) ....................... 99 SPI Slave Mode (CKE = 0) ................................. 47, 100 SPI Slave Mode (CKE = 1) ................................. 47, 100 Time-out Sequence on Power-up (MCLR Tied to VDD Through Pull-up Resistor)............................... 67 Time-out Sequence on Power-up (MCLR Tied to VDD Through RC Network): Case 1 ....................... 67 Time-out Sequence on Power-up (MCLR Tied to VDD Through RC Network): Case 2 ....................... 67 Timer0 and Timer1 External Clock.............................. 97 Wake-up from SLEEP through Interrupt ..................... 72 Timing Parameter Symbology............................................. 93 TMR1H Register ................................................................... 9 TMR1L Register .................................................................... 9 TMR2 Register ...................................................................... 9 TMR2ON bit ........................................................................ 36 TOUTPS0 bit....................................................................... 36 TOUTPS1 bit....................................................................... 36 TOUTPS2 bit....................................................................... 36 TOUTPS3 bit....................................................................... 36 TRISA Register ............................................................. 10, 21 TRISB Register ............................................................. 10, 23 TRISC Register ............................................................. 10, 25 2002 Microchip Technology Inc. U UA....................................................................................... 44 Update Address bit, UA ...................................................... 44 W Wake-up from SLEEP................................................... 59, 71 Interrupts .............................................................. 65, 66 MCLR Reset ............................................................... 66 WDT Reset ................................................................. 66 Watchdog Timer (WDT)................................................ 59, 70 Associated Registers.................................................. 70 Enable (WDTEN bit) ................................................... 70 Postscaler. See Postscaler, WDT Programming Considerations ..................................... 70 RC Oscillator .............................................................. 70 Time-out Period .......................................................... 70 WDT Reset, Normal Operation....................... 62, 65, 66 WDT Reset, SLEEP ....................................... 62, 65, 66 WCOL ................................................................................. 45 Write Collision Detect bit, WCOL........................................ 45 WWW, On-Line Support ....................................................... 3 DS39597B-page 129 PIC16F72 NOTES: DS39597B-page 130 2002 Microchip Technology Inc. PIC16F72 ON-LINE SUPPORT Systems Information and Upgrade Hot Line Microchip provides on-line support on the Microchip World Wide Web (WWW) site. The Systems Information and Upgrade Line provides system users a listing of the latest versions of all of Microchip's development systems software products. Plus, this line provides information on how customers can receive any currently available upgrade kits.The Hot Line Numbers are: The web site is used by Microchip as a means to make files and information easily available to customers. To view the site, the user must have access to the Internet and a web browser, such as Netscape or Microsoft Explorer. Files are also available for FTP download from our FTP site. 1-800-755-2345 for U.S. and most of Canada, and 1-480-792-7302 for the rest of the world. Connecting to the Microchip Internet Web Site 013001 The Microchip web site is available by using your favorite Internet browser to attach to: www.microchip.com The file transfer site is available by using an FTP service to connect to: ftp://ftp.microchip.com The web site and file transfer site provide a variety of services. Users may download files for the latest Development Tools, Data Sheets, Application Notes, User's Guides, Articles and Sample Programs. A variety of Microchip specific business information is also available, including listings of Microchip sales offices, distributors and factory representatives. Other data available for consideration is: * Latest Microchip Press Releases * Technical Support Section with Frequently Asked Questions * Design Tips * Device Errata * Job Postings * Microchip Consultant Program Member Listing * Links to other useful web sites related to Microchip Products * Conferences for products, Development Systems, technical information and more * Listing of seminars and events 2002 Microchip Technology Inc. DS39597B-page 131 PIC16F72 READER RESPONSE It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip product. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150. Please list the following information, and use this outline to provide us with your comments about this Data Sheet. To: Technical Publications Manager RE: Reader Response Total Pages Sent From: Name Company Address City / State / ZIP / Country Telephone: (_______) _________ - _________ FAX: (______) _________ - _________ Application (optional): Would you like a reply? Device: PIC16F72 Y N Literature Number: DS39597B Questions: 1. What are the best features of this document? 2. How does this document meet your hardware and software development needs? 3. Do you find the organization of this data sheet easy to follow? If not, why? 4. What additions to the data sheet do you think would enhance the structure and subject? 5. What deletions from the data sheet could be made without affecting the overall usefulness? 6. Is there any incorrect or misleading information (what and where)? 7. How would you improve this document? 8. How would you improve our software, systems, and silicon products? DS39597B-page 132 2002 Microchip Technology Inc. PIC16F72 PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. Device X Temperature Range /XX XXX Package Pattern Device PIC16F72: Standard VDD range PIC16F72T: (Tape and Reel) PIC16LF72: Extended VDD range Temperature Range I Package SO SS ML P Pattern QTP, SQTP, ROM Code (factory specified) or Special Requirements. Blank for OTP and Windowed devices. * = = Examples: a) PIC16F72-04I/SO = Industrial Temp., SOIC package, normal VDD limits b) PIC16LF72-20I/SS = Industrial Temp., SSOP package, extended VDD limits c) PIC16F72-20I/ML = Industrial Temp., QFN package, normal VDD limits 0C to +70C -40C to +85C = = = = SOIC SSOP QFN PDIP JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of each oscillator type. Sales and Support Data Sheets Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following: 1. 2. 3. Your local Microchip sales office The Microchip Corporate Literature Center U.S. FAX: (480) 792-7277 The Microchip Worldwide Site (www.microchip.com) Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using. New Customer Notification System Register on our web site (www.microchip.com/cn) to receive the most current information on our products. 2002 Microchip Technology Inc. DS39597B-page 133 M WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC Japan Corporate Office Australia 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: 480-792-7627 Web Address: http://www.microchip.com Microchip Technology Australia Pty Ltd Suite 22, 41 Rawson Street Epping 2121, NSW Australia Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 Microchip Technology Japan K.K. Benex S-1 6F 3-18-20, Shinyokohama Kohoku-Ku, Yokohama-shi Kanagawa, 222-0033, Japan Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Rocky Mountain China - Beijing 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7966 Fax: 480-792-4338 Microchip Technology Consulting (Shanghai) Co., Ltd., Beijing Liaison Office Unit 915 Bei Hai Wan Tai Bldg. No. 6 Chaoyangmen Beidajie Beijing, 100027, No. China Tel: 86-10-85282100 Fax: 86-10-85282104 Atlanta 500 Sugar Mill Road, Suite 200B Atlanta, GA 30350 Tel: 770-640-0034 Fax: 770-640-0307 Boston 2 Lan Drive, Suite 120 Westford, MA 01886 Tel: 978-692-3848 Fax: 978-692-3821 Chicago 333 Pierce Road, Suite 180 Itasca, IL 60143 Tel: 630-285-0071 Fax: 630-285-0075 Dallas 4570 Westgrove Drive, Suite 160 Addison, TX 75001 Tel: 972-818-7423 Fax: 972-818-2924 Detroit Tri-Atria Office Building 32255 Northwestern Highway, Suite 190 Farmington Hills, MI 48334 Tel: 248-538-2250 Fax: 248-538-2260 Kokomo 2767 S. Albright Road Kokomo, Indiana 46902 Tel: 765-864-8360 Fax: 765-864-8387 Los Angeles 18201 Von Karman, Suite 1090 Irvine, CA 92612 Tel: 949-263-1888 Fax: 949-263-1338 China - Chengdu Microchip Technology Consulting (Shanghai) Co., Ltd., Chengdu Liaison Office Rm. 2401, 24th Floor, Ming Xing Financial Tower No. 88 TIDU Street Chengdu 610016, China Tel: 86-28-86766200 Fax: 86-28-86766599 China - Fuzhou Microchip Technology Consulting (Shanghai) Co., Ltd., Fuzhou Liaison Office Unit 28F, World Trade Plaza No. 71 Wusi Road Fuzhou 350001, China Tel: 86-591-7503506 Fax: 86-591-7503521 China - Shanghai Microchip Technology Consulting (Shanghai) Co., Ltd. Room 701, Bldg. B Far East International Plaza No. 317 Xian Xia Road Shanghai, 200051 Tel: 86-21-6275-5700 Fax: 86-21-6275-5060 China - Shenzhen 150 Motor Parkway, Suite 202 Hauppauge, NY 11788 Tel: 631-273-5305 Fax: 631-273-5335 Microchip Technology Consulting (Shanghai) Co., Ltd., Shenzhen Liaison Office Rm. 1315, 13/F, Shenzhen Kerry Centre, Renminnan Lu Shenzhen 518001, China Tel: 86-755-2350361 Fax: 86-755-2366086 San Jose China - Hong Kong SAR Microchip Technology Inc. 2107 North First Street, Suite 590 San Jose, CA 95131 Tel: 408-436-7950 Fax: 408-436-7955 Microchip Technology Hongkong Ltd. Unit 901-6, Tower 2, Metroplaza 223 Hing Fong Road Kwai Fong, N.T., Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 New York Toronto 6285 Northam Drive, Suite 108 Mississauga, Ontario L4V 1X5, Canada Tel: 905-673-0699 Fax: 905-673-6509 India Microchip Technology Inc. India Liaison Office Divyasree Chambers 1 Floor, Wing A (A3/A4) No. 11, O'Shaugnessey Road Bangalore, 560 025, India Tel: 91-80-2290061 Fax: 91-80-2290062 Korea Microchip Technology Korea 168-1, Youngbo Bldg. 3 Floor Samsung-Dong, Kangnam-Ku Seoul, Korea 135-882 Tel: 82-2-554-7200 Fax: 82-2-558-5934 Singapore Microchip Technology Singapore Pte Ltd. 200 Middle Road #07-02 Prime Centre Singapore, 188980 Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan Microchip Technology (Barbados) Inc., Taiwan Branch 11F-3, No. 207 Tung Hua North Road Taipei, 105, Taiwan Tel: 886-2-2717-7175 Fax: 886-2-2545-0139 EUROPE Denmark Microchip Technology Nordic ApS Regus Business Centre Lautrup hoj 1-3 Ballerup DK-2750 Denmark Tel: 45 4420 9895 Fax: 45 4420 9910 France Microchip Technology SARL Parc d'Activite du Moulin de Massy 43 Rue du Saule Trapu Batiment A - ler Etage 91300 Massy, France Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany Microchip Technology GmbH Gustav-Heinemann Ring 125 D-81739 Munich, Germany Tel: 49-89-627-144 0 Fax: 49-89-627-144-44 Italy Microchip Technology SRL Centro Direzionale Colleoni Palazzo Taurus 1 V. Le Colleoni 1 20041 Agrate Brianza Milan, Italy Tel: 39-039-65791-1 Fax: 39-039-6899883 United Kingdom Microchip Ltd. 505 Eskdale Road Winnersh Triangle Wokingham Berkshire, England RG41 5TU Tel: 44 118 921 5869 Fax: 44-118 921-5820 Austria Microchip Technology Austria GmbH Durisolstrasse 2 A-4600 Wels Austria Tel: 43-7242-2244-399 Fax: 43-7242-2244-393 05/16/02 DS39597B-page 134 2002 Microchip Technology Inc.