1997 Nov 24 1
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
FEATURES
•Polarized aluminium electrolytic
capacitors, solid electrolyte MnO2
•Radial leads, max. height 12.5 mm,
resin dipped, orange coloured
•Extremely long useful life, 20000
hours at 125 °C
•Extended usable temperature
range up to 175 °C
•Excellent low temperature,
impedance and ESR behaviour
•Charge and discharge proof,
application with 0 Ω resistance
allowed
•Reverse DC voltage up to 0.3 ×UR
allowed
•AC voltage up to 0.8 ×UR allowed
•Advanced technology to achieve
high reliability and high stability.
Fig.1 Component outlines.
handbook, 4 columns
MBC517
handbook, 4 columns
MBG073
SAL RP
122
axial
version
SAL A
123 SAL RPM
128
higher
CV/volume
APPLICATIONS
•EDP, telecommunication, general
industrial
•Automotive and audio-video
•Smoothing, filtering and buffering •For small power supplies, DC/DC
converters.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Case sizes (Hmax ×Wmax ×Tmax in mm) 12.5 ×8×3.5 to 12.5 ×8×6
Rated capacitance range (E6 series), CR0.33 to 68 µF
Tolerance on CR±20%
Rated voltage range, UR6.3 to 40 V
Category temperature range:
UR= 6.3 to 40 V −55 to +85 °C
UC= 6.3 to 25 V −55 to +125 °C
Endurance test at 125 °C 10000 hours
Useful life at 125 °C 20000 hours
Useful life at 175 °C 2000 hours
Useful life at 40 °C, IR applied >300000 hours
Shelf life at 0 V, 125 °C 500 hours
Based on sectional specification IEC 384-4/CECC 30300
Detail specification IEC 384-4-2/CECC 30302
Climatic category IEC 68 55/125/56
1997 Nov 24 2
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Selection chart for CR, UR, UC and relevant maximum case sizes (H ×W×T in mm)
Preferred types in bold.
CR
(µF)
UR(V) at Tamb =85°C
6.3 10 16 25 35 40
UC(V) at Tamb = 125 °C
6.3 10 16 25 35 40
0.33 −−−−−12.5 ×8×3.5
0.47 −−−−−12.5 ×8×4.5
0.68 −−−12.5 ×8×3.5 −12.5 ×8×4.5
1.0 −−−12.5 ×8×3.5 12.5 ×8×4.5 12.5 ×8×5
1.5 −−−12.5 ×8×3.5 −12.5 ×8×6
2.2 −−12.5 ×8×3.5 12.5 ×8×4.5 −12.5 ×8×6
3.3 −−12.5 ×8×3.5 12.5 ×8×4.5 12.5 ×8×6−
4.7 −12.5 ×8×3.5 12.5 ×8×4.5 12.5 ×8×5−−
6.8 −12.5 ×8×3.5 12.5 ×8×4.5 12.5 ×8×6−−
10 12.5 ×8×3.5 12.5 ×8×4.5 12.5 ×8×5 12.5 ×8×6−−
15 12.5 ×8×4.5 12.5 ×8×4.5 12.5 ×8×6−−−
22 12.5 ×8×4.5 12.5 ×8×5−−−−
33 12.5 ×8×5 12.5 ×8×6−−−−
47 12.5 ×8×6−−−−−
68 12.5 ×8×6−−−−−
1997 Nov 24 3
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
MECHANICAL DATA AVAILABLE FORMS AND PACKAGING QUANTITIES
Fig.2 Form CB: Short leads, in boxes.
Dimensions in mm.
For dimensions see Table 1.
The diameter of the mounting holes in the printed-circuit board is 0.8 ±0.1 mm.
handbook, full pagewidth
MBC516 - 1
5.2 0.2 O 0.6 0.06
0.05
printed-wiring
board
Bottom view
12.5 max
2.1 0.4
0
W
1.3 0.05
0.1
T
4.5 0.3
0.7
n
dbook, full pagewidth
1.0 0.1
MBC515 - 2
5.2 0.2 9 1
2 0.5
12.5
0.5
O 0.6 0.06
0.05
printed-wiring
board
Bottom view
12.5 max
2.1 0.4
0
W
1.3 0.05
0.1
T
Fig.3 Form CA: Long leads with keyed polarity, in boxes.
Dimensions in mm.
For dimensions see Table 1.
The diameter of the mounting holes in the printed-circuit board is 0.8 ±0.1 mm, except for the hole of the anode lead of Form CA capacitors: 1.3 −0.2 mm.
1997 Nov 24 4
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Table 1 Physical dimensions, mass and packaging quantities; see Figs 2 and 3
Note
1. In plastic bags of 200 units each.
Taped products
Mounting
When bending, cutting or straightening the leads, ensure that the capacitor body is relieved of stress.
Bending after soldering must be avoided.
CASE MASS
(g)
PACKAGING QUANTITIES
MAXIMUM SIZE
H×W×T
(mm) CODE FORM
CA
(note 1)
FORM
CB
(note 1)
FORM
TR+ FORM
TFA
12.5 ×8×3.5 1 ≈0.35 1000 1000 2000 2000
12.5 ×8×4.5 2 ≈0.38 1000 1000 2000 2000
12.5 ×8×53≈0.45 1000 1000 1000 1000
12.5 ×8×64≈0.58 800 1000 1000 1000
Fig.4 Taped versions.
Form TR+: Taped on reel, positive leading.
Form TFA: Taped in ammopack.
Tape dimensions are specified in handbook, Section
“Packaging”
.
handbook, halfpage
MBC518
1997 Nov 24 5
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
ELECTRICAL DATA AND ORDERING INFORMATION
Unless otherwise specified, all electrical values in Table 2 apply at Tamb =20to25°C,
P = 86 to 106 kPa, RH = 45 to 75%.
CRrated capacitance at 100 Hz, tolerance ±20%
IRmax. RMS ripple current, no necessary DC voltage applied
IL5 max. leakage current after 5 minutes at UR
Tan δmax. dissipation factor at 100 Hz
ESR max. equivalent series resistance at 100 Hz
Z max. impedance at 100 kHz
Ordering example
Electrolytic capacitors 122 series
10 µF/16 V; ±20%
Maximum case size: 12.5 × 8 × 5 mm, Form TFA
Catalogue number: 2222 122 35109.
Table 2 Electrical data and ordering information; preferred types in bold
UC
(V) UR
(V)
CR
100 Hz
(µF)
MAXIMUM
CASE SIZE
H×W×T
(mm)
CASE
CODE
IR
100 Hz
125 °C
(mA)
IR
10 kHz
85 °C
(mA)
IR
100 kHz
40 °C
(mA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
100 kHz
(Ω)
CA TALOGUE NUMBER 2222 122 .....
FORM
CB FORM
CA
FORM
TR+
REEL
FORM
TFA
AMMO
6.3 6.3 10 12.5 ×8×3.5 1 9 156 211 3 0.15 30 5 53109 73109 23109 33109
15 12.5 ×8×4.5 2 13 195 264 5 0.15 20 3 53159 73159 23159 33159
22 12.5 ×8×4.5 2 20 234 317 7 0.15 14 1.3 53229 73229 23229 33229
33 12.5 ×8×5 3 30 293 396 11 0.15 9 0.9 53339 73339 23339 33339
47 12.5 ×8×64 42 371 502 15 0.15 6.4 0.7 53479 73479 23479 33479
68 12.5 ×8×6 4 61 449 607 22 0.15 4.4 0.5 53689 73689 23689 33689
10 10 4.7 12.5 ×8×3.5 1 7 117 158 3 0.15 64 7 54478 74478 24478 34478
6.8 12.5 ×8×3.5 1 10 137 185 4 0.15 44 5 54688 74688 24688 34688
10 12.5 ×8×4.5 2 14 156 211 5 0.15 30 1.5 54109 74109 24109 34109
15 12.5 ×8×4.5 2 21 195 264 8 0.15 20 1 54159 74159 24159 34159
22 12.5 ×8×53 31 234 317 11 0.15 14 0.7 54229 74229 24229 34229
33 12.5 ×8×6 4 47 312 422 17 0.15 9 0.5 54339 74339 24339 34339
16 16 2.2 12.5 ×8×3.5 1 5 98 132 2 0.10 91 10 55228 75228 25228 35228
3.3 12.5 ×8×3.5 1 8 117 158 3 0.10 61 7 55338 75338 25338 35338
4.7 12.5 ×8×4.5 2 11 137 185 4 0.10 43 2 55478 75478 25478 35478
6.8 12.5 ×8×4.5 2 16 156 211 6 0.10 29.5 1.5 55688 75688 25688 35688
10 12.5 ×8×53 23 195 264 8 0.10 20 1 55109 75109 25109 35109
15 12.5 ×8×6 4 34 254 343 12 0.10 13.5 0.7 55159 75159 25159 35159
1997 Nov 24 6
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
25 25 0.68 12.5 ×8×3.5 1 2 55 74 2 0.10 295 30 56687 76687 26687 36687
1.0 12.5 ×8×3.5 1 4 62 85 2 0.10 200 20 56108 76108 26108 36108
1.5 12.5 ×8×3.5 1 5 78 106 2 0.10 135 15 56158 76158 26158 36158
2.2 12.5 ×8×4.5 2 8 98 132 3 0.10 91 10 56228 76228 26228 36228
3.3 12.5 ×8×4.5 2 12 117 158 4 0.10 61 7 56338 76338 26338 36338
4.7 12.5 ×8×53 17 137 185 6 0.10 43 5 56478 76478 26478 36478
6.8 12.5 ×8×6 4 24 176 238 9 0.10 29.5 3 56688 76688 26688 36688
10 12.5 ×8×64 35 200 238 13 0.15 20 2 56109 76109 26109 36109
25 35 1.0 12.5 ×8×4.5 2 3 62 85 2 0.10 200 15 50108 70108 20108 30108
3.3 12.5 ×8×6 4 12 117 132 6 0.10 61 5 50338 70338 20338 30338
25 40 0.33 12.5 ×8×3.5 1 1 39 53 2 0.10 610 30 57337 77337 27337 37337
0.47 12.5 ×8×4.5 2 2 47 63 2 0.10 430 20 57477 77477 27477 37477
0.68 12.5 ×8×4.5 2 2 55 74 2 0.10 295 15 57687 77687 27687 37687
1.0 12.5 ×8×53 4 62 85 2 0.10 200 10 57108 77108 27108 37108
1.5 12.5 ×8×6 4 5 78 106 3 0.10 135 7 57158 77158 27158 37158
2.2 12.5 ×8×64 8 98 132 5 0.10 91 5 57228 77228 27228 37228
UC
(V) UR
(V)
CR
100 Hz
(µF)
MAXIMUM
CASE SIZE
H×W×T
(mm)
CASE
CODE
IR
100 Hz
125 °C
(mA)
IR
10 kHz
85 °C
(mA)
IR
100 kHz
40 °C
(mA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
100 kHz
(Ω)
CA TALOGUE NUMBER 2222 122 .....
FORM
CB FORM
CA
FORM
TR+
REEL
FORM
TFA
AMMO
1997 Nov 24 7
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Voltage
MARKING
The capacitors are marked (where possible) with the following information:
•Rated capacitance (in µF)
•Tolerance code on rated capacitance (M = ±20%)
•Rated voltage (in V) and category voltage if applicable
•Date code in accordance with
“IEC 62”
•Name of manufacturer
•“+” signs to identify the anode terminal.
handbook, 4 columns
U
UR
(%)
50
T ( C)
050
85 100 125 150 175
0
33
50
66
100
MRA486
amb o
2
1
Fig.5 Maximum permissible voltage up to 175 °C.
Curve 1: 6.3 V to 25 V.
Curve 2: 35 and 40 V.
1997 Nov 24 8
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
ELECTRICAL DATA (continued)
Additional electrical data
Ripple current (IR)
Applying the maximum RMS ripple current given in Table 2 will cause a device temperature of 138 °C. The 100 kHz
values in Table 2 for other temperatures are to be calculated with the following IR multipliers:
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods Us≤1.15 ×UR
Reverse voltage Urev <0.3 ×UR
Maximum peak AC voltage reverse
voltage applied ≤2V
Maximum peak AC voltage without
reverse voltage applied Tamb ≤85 °C:
at f ≤0.1 Hz 0.30 ×UR
at 0.1 Hz <f≤1 Hz 0.45 ×UR
at 1 Hz <f≤10 Hz 0.60 ×UR
at 10 Hz <f≤50 Hz 0.65 ×UR
at f >50 Hz 0.80 ×UR
85 °C<Tamb ≤125 °C:
at f ≤0.1 Hz 0.15 ×UR
at 0.1 Hz <f≤1 Hz 0.22 ×UR
at 1 Hz <f≤10 Hz 0.30 ×UR
at 10 Hz <f≤50 Hz 0.32 ×UR
at f >50 Hz 0.40 ×UR
Inductance
Equivalent series inductance (ESL) case size 12.5 ×8×3.5 to 12.5 ×8×4.5 mm typ. 9 to 14 nH
case size 12.5 ×8×5 and 12.5 ×8×6 mm typ. 11 to 16 nH
all case sizes max. 20 nH
Dissipation
Maximum power dissipation case sizes 12.5 ×8×3.5 to 12.5 ×8×5mm P
125 =88mW
case size 12.5 ×8×6mm P
125 = 104 mW
Current
Maximum leakage current after 5 minutes at UR and Tamb =25°CI
L5 ≤0.05CR×UR or 2 µA
whichever is greater;
see Table 2
Typical leakage current after 15 s at UR and Tamb =25°C:
UR= 6.3 to 16 V ≈0.2 ×value stated in Table 2
UR=25to40V ≈0.1 ×value stated in Table 2
Tamb 25 °C40°C65°C85°C 105 °C 125 °C
IR multiplier 1.1 1.0 0.88 0.75 0.59 0.37
1997 Nov 24 9
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Capacitance (C)
Typical parameter change after endurance test at Tamb = 125 °C
Fig.6 Typical multiplier of capacitance as a function of ambient temperature.
C0= capacitance at 25 °C and 100 Hz.
handbook, 4 columns
80 40 40
1.1
1.0
0.8
0.9
MGB017
0Tamb ( C)
o
C
0
80 120 160
standard deviation σ
σ0.05
0
0.6
1.2
0.7
C
Fig.7 Change of capacitance after endurance test.
handbook, full pagewidth
MGB018
0.01
10
4
8
6
2
4
2
0
0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.99
cumulative frequency (%)
∆C
(%) 2000 h
10000 h
5000 h
1997 Nov 24 10
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Typical parameter change after endurance test at Tamb = 125 °C
handbook, 4 columns
16040 0 40
10
MGB019
10
1
10 120
Tamb ( C)
o
80
I0
I
1
2
Fig.8 Typical multiplier of leakage current as a function of ambient temperature.
I0= leakage current during continuous operation at UR and Tamb =25°C.
Fig.9 Leakage current after endurance test.
Tamb = 125 °C.
handbook, full pagewidth
MGB020
0.01
1
4
60
2
3
30
6
8
10
20
40
100
80
leakage current (% of initial requirements)
5
50
0.05 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.95 99.99
cumulative frequency (%)
2000 h
10000 h
5000 h
init.
1997 Nov 24 11
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Dissipation factor (tan δ)
Typical parameter change after endurance test at Tamb = 125 °C
handbook, 4 columns
– 80 – 40 40
MGB021
0Tamb ( C)
o
80 120 160
0
tan δ
tan δ
2.0
1.5
1.0
0.5
0
standard deviation σ
σ0.5
0
Fig.10 Typical multiplier of dissipation factor as a function of temperature.
tan δ0= dissipation factor at Tamb =25°C and 100 Hz.
Fig.11 Tan δ after endurance test.
handbook, full pagewidth
MGB022
0.01
0
20
40
120
60
80
100
tan δ (% of initial requirements)
0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.99
cumulative frequency (%)
2000 h
10000 h
5000 h
init.
1997 Nov 24 12
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Equivalent series resistance (ESR)
Fig.12 Typical ESR as a function of temperature.
Curve 1: 0.1 µF, 40 V.
Curve 2: 1.5 µF, 40 V.
Curve 3: 3.3 µF, 25 V.
Curve 4: 10 µF, 6.3 V.
Curve 5: 22 µF, 10 V.
ESR at 100 Hz.
handbook, 4 columns
103
102
10
1
10 1150100
MBC593
50 0 50 100
104
ESR
(Ω)
Tamb ( C)
o
1
2
3
4
5
Fig.13 Typical ESR as a function of frequency.
Curve 1: 0.33 µF, 40 V.
Curve 2: 0.68 µF, 25 V.
Curve 3: 10 µF, 6.3 V.
Case size H ×W×T = 12.5 ×8×3.5 mm.
Tamb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
10 1
MRA477
2
3
1
10 2
1997 Nov 24 13
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Fig.14 Typical ESR as a function of frequency.
Curve 1: 0.47 µF, 25 V.
Curve 2: 2.2 µF, 25 V.
Curve 3: 4.7 µF, 16 V
Curve 4: 22 µF, 6.3 V.
Case size H ×W×T = 12.5 ×8×4.5 mm.
Tamb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA478
10 1
10 2
2
3
1
4
Fig.15 Typical ESR as a function of frequency.
Curve 1: 1.0 µF, 40 V.
Curve 2: 4.7 µF, 25 V.
Curve 3: 10 µF, 16 V.
Curve 4: 33 µF, 6.3 V.
Case size H ×W×T = 12.5 ×8×5mm.
T
amb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA479
10 1
10 2
2
3
1
4
1997 Nov 24 14
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Impedance (Z)
Fig.16 Typical ESR as a function of frequency.
Curve 1: 1.5 µF, 40 V.
Curve 2: 6.8 µF, 25 V.
Curve 3: 15 µF, 16 V.
Curve 4: 68 µF, 6.3 V.
Case size H ×W×T = 12.5 ×8×6mm.
T
amb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA480
10 1
10 2
2
3
1
4
Fig.17 Typical multiplier of impedance as a function of frequency at different temperatures.
Z0= initial impedance value at Tamb =25°C.
handbook, 4 columns
MGB023
2.0
0
0.5
10210 3104105106107
1.5
1.0
f (Hz)
Z
0
108
Z
+125 C
o
+50 C
o
+25 C
o
–20 C
o
–55 C
o
T =
amb
1997 Nov 24 15
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Fig.18 Typical impedance as a function of frequency
Curve 1: 0.33 µF, 40 V.
Curve 2: 0.68 µF, 25 V.
Curve 3: 10 µF, 6.3 V.
Case size H ×W×T = 12.5 ×8×3.5 mm.
Tamb =25°C.
handbook, 4 columns
103
Z
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA487
10 1
10 2
2
3
1
Curve 1: 0.47 µF, 25 V.
Curve 2: 2.2 µF, 25 V.
Curve 3: 4.7 µF, 16 V.
Curve 4: 22 µF, 6.3 V.
Case size H ×W×T = 12.5 ×8×4.5 mm.
Tamb =25°C.
Fig.19 Typical impedance as a function of frequency.
handbook, 4 columns
103
Z
(Ω)
10310410 7
f (Hz)
102
101
1
105106
102
MRA488
10 1
10 2
2
3
1
4
1997 Nov 24 16
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Fig.20 Typical impedance as a function of frequency.
Curve 1: 1.0 µF, 40 V.
Curve 2: 4.7 µF, 25 V.
Curve 3: 10 µF, 16 V.
Curve 4: 33 µF, 6.3 V.
Case size H ×W×T = 12.5 ×8×5mm.
T
amb =25°C.
handbook, 4 columns
103
Z
(Ω)
103104107
f (Hz)
102
101
1
105106
102
MRA489
10 1
10 2
2
3
1
4
Fig.21 Typical impedance as a function of frequency.
Curve 1: 1.5 µF, 40 V
Curve 2: 6.8 µF, 25 V
Curve 3: 15 µF, 16 V
Curve 4: 68 µF, 6.3 V.
Case size H ×W×T = 12.5 ×8×6mm.
T
amb =25°C.
handbook, 4 columns
103
Z
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA490
10 1
10 2
2
3
1
4
1997 Nov 24 17
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, Section
“Tests and Requirements”
.
Table 3 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb = 125 °C;
UR= 6.3 to 25 V with UR applied;
UR= 35 and 40 V with UC applied;
10000 hours
∆C/C: ±10%
tan δ≤1.2 ×spec. limit
Z≤1.2 ×spec. limit
IL5 ≤ spec. limit
Useful life CECC 30302
subclause 1.8.1 Tamb = 125 °C; IR applied and
UR= 6.3 to 25 V with UR applied;
UR= 35 and 40 V with UC applied;
20000 hours
∆C/C: ±15%
tan δ≤1.5 ×spec. limit
Z≤1.5 ×spec. limit
IL5 ≤ spec. limit
no short or open circuit,
no visible damage
total failure percentage: <1%
Shelf life
(storage at high
temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb = 125 °C; no voltage applied;
500 hours ∆C/C: ±10%
tan δ≤1.2 ×spec. limit
IL5 ≤1×spec. limit
Charge and discharge IEC 384-4-2
subclause 9.21 106cycles without series resistance;
0.5 s to UR;
0.5 s to ground
∆C/C: ±5%
no short or open circuit,
no visible damage
Solvent resistance IEC 68-2-45,
test XA
IEC 653
immersion:
5±0.5 minutes with or without ultrasonic
at 55 ±5°C
Solvents: demineralized water and/or
calgonite solution (20 g/l)
visual appearance not
affected
1997 Nov 24 18
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl SAL-RP 122
Extended vibration IEC 68-2-6
test Fc 10 to 2000 Hz;
1.5 mm or 20 g;
1 octave/minute;
3 directions;
1 sweep per direction;
no voltage applied
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
∆C/C: ±5%
tan δ≤1.2 ×spec. limit
Z≤1.2 ×spec. limit
IL5 ≤1.5 ×spec. limit
Shock IEC 68-2-27
test Ea half-sine or saw tooth pulse shape;
50 g; 11 ms; 3 successive shocks in
each direction of 3 mutually perpendicular
axes; no voltage applied
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
∆C/C: ±5%
tan δ≤1.2 ×spec. limit
Z≤1.2 ×spec. limit
IL5 ≤1.5 ×spec. limit
Passive flammability IEC 695-2-2 capacitor mounted to a vertical
printed-circuit board; one flame on
capacitor body; Tamb =20to25°C;
test duration = 20 s.
after removing the test flame
from the capacitor, the
capacitor must not continue
to burn for more than 15 s;
no burning particles must
drop from the sample
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
