MCC TM Micro Commercial Components FR301 THRU FR307 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Low Forward Voltage Drop and High Current Capability Fast Switching Speed For High Efficiency Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) * * * * * * 3 Amp Fast Recovery Rectifier 50 to 1000 Volts Maximum Ratings * * DO-201AD Operating Temperature: -55C to +150C Storage Temperature: -55C to +150C MCC Catalog Number Device Marking FR301 FR302 FR303 FR304 FR305 FR306 FR307 FR301 FR302 FR303 FR304 FR305 FR306 FR307 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V D A Cathode Mark B D Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time FR301-304 FR305 FR306-307 Typical Junction Capacitance IF(AV) 3A IFSM 150A 8.3ms, half sine VF 1.3V IFM = 3.0A; TA = 25C TA = 55C C DIMENSIONS IR 10A 150A TA = 25C TA = 55C Trr 150ns 250ns 500ns 65pF IF=0.5A, IR=1.0A, Irr=0.25A CJ DIM A B C D INCHES MIN .287 .189 .048 1.000 MAX .374 .208 .052 --- MM MIN 7.30 4.80 1.20 25.40 MAX 9.50 5.30 1.30 --- NOTE Measured at 1.0MHz, VR=4.0V Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com Revision: B 1 of 4 2013/01/01 MCC FR301 thru FR307 Figure 1 Typical Forward Characteristics TM Micro Commercial Components 20 Figure 2 Forward Derating Curve 10 3.0 6 4 2.5 2 25C Amps 2.0 1 .6 1.5 Amps .4 1.0 .2 .5 .1 Single Phase, Half Wave 60Hz Resistive or Inductive Load .06 0 .04 0 50 75 100 125 150 175 C .02 .01 .4 .6 .8 1.0 Average Forward Rectified Current - Amperesversus Ambient Temperature - C 1.4 12 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF TJ=25C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 Junction Capacitance - pFversus Reverse Voltage - Volts www.mccsemi.com Revision: B 3 of 4 2013/01/01 MCC FR301 thru FR307 TM Micro Commercial Components Figure 4 Peak Forward Surge Current 300 250 200 150 Amps 100 50 0 1 2 4 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50 10 trr +0.5A 0 Pulse Generator Note 2 25Vdc 1 Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive www.mccsemi.com Revision: B 3 of 4 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 1.2Kpcs/Reel Part Number-AP Ammo Packing: 1.2Kpcs/Ammo Box Part Number-BP Bulk: 12Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 4 of 4 2013/01/01