Supplier : Samsung electro-mechanics Samsung P/N: CL05A106MP5NUNC
Product : Multi-layer Ceramic Capacitor Description : CAP, 10㎌, 10V, ±20%, X5R, 0402
CL 05 A106 M P 5 N U N C
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
①Series Samsung Multi-layer Ceramic Capacitor
②Size 0402 (inch code) L: 1.0 ± 0.2 mm W: ± 0.2 mm
③Dielectric X5R ⑧Inner electrode
④Capacitance 10 ㎌Termination
⑤Capacitance ±20 % Plating (Pb Free)
tolerance ⑨Product 0402 Size dimension spec
⑥Rated Voltage 10 V ⑩Special Reserved for future use
⑦Thickness 0.5 ± 0.2 mm ⑪Packaging Cardboard Type, 7" reel
B. Samsung Reliablility Test and Judgement condition
Capacitance Within specified tolerance 1㎑±10% 0.5±0.1Vrms
Tan δ (DF) 0.125 max.
Insulation 10,000Mohm or 50Mohm㎌Rated Voltage 60~120 sec.
Resistance Whichever is Smaller
Appearance No abnormal exterior appearance Microscope (×10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature X5R
Characterisitcs (From -55℃ to 85℃, Capacitance change shoud be within ±15%)
Adhesive Strength No peeling shall be occur on the 500g·F, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : within ±12.5% Bending to the limit (1mm)
with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to Capacitance change : within ±7.5% Solder pot : 270±5℃, 10±1sec.
Soldering heat Tan δ, IR : initial spec.
Sn 100%
Cu
Ni
250%
Judgement Test condition
SPECIFICATION
A. Samsung Part Number
0.5
Vibration Test Capacitance change : within ±5% Amplitude : 1.5mm
Tan δ, IR : initial spec. From 10㎐ to 55㎐ (return : 1min.)
2hours × 3 direction (x, y, z)
Moisture Capacitance change : within ±12.5% With rated voltage
Resistance Tan δ 0.25 max 40±2℃, 90~95%RH, 500+12/-0hrs
IR : 3.5㏁·㎌ or Over
High Temperature Capacitance change : within ±12.5% Wit
h
of the rated voltage
Resistance Tan δ 0.25 max Max. operating temperature
IR : 7㏁·㎌ or Over 1000+48/-0hrs
Temperature Capacitance change : within ±15% 1 cycle condition
Cycling Tan δ, IR : initial spec. Min. operating temperature →25℃
→Max. operating temperature →25℃
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.
100%
Judgement Test condition
