FAZ CONNECTOR 1.0mm Emboss Tape Connectors for FFC pitch Features ------------------------ * Zero insertion force mechanism (ZIF) A ZIF mechanism improves wear resistance and extends the mating life of the connector. By moving the slider into its locking position after the FFC has been inserted into the connector, the FFC leads are securely locked in place. * SMT configuration Due to its small pitch and its ability to be surface mounted, this connector meets today's demand for high-density packaging. Top entry and side entry versions are available. Top entry is available with either an in-line or a staggered solder tail footprint whilst the side entry version is available with FFC contact points on either the upper or lower sides. * Embossed taping for automatic mounting This connector is supplied in embossed tape packaging, for mounting by automatic placement machines. The FAZ series Zero Insertion Force (ZIF) connector has been developed as an SMT version of the existing FMZ connector. Specifications ------------------- * Current rating: 1.0A , AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/20m max. After environmental testing/40m max. * Insulation resistance: 500M min. * Withstanding voltage: 500V AC/minute * Applicable FFC: Conductor pitch/1.0mm Conductor width/0.7mm Mating part thickness/0.300.05mm <Note>FFC to be actually used should be checked for applicability. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. FJ ST Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 1 FAZ CONNECTOR Connector --------------------------------------------------------------- Top entry type <In-line, Normal type> FJST FJST <Staggered, Normal type> A C Circuit No.1 Circuit No.1 1.0 A C With bosses B 2.8 B 0.95 3.2 2.8 0.95 0.8 1.3 0.25 2.6 0.3 1.3 0.5 1.0 0.25 2.8 5.0 0.25 5.0 3.2 0.8 Without bosses 2.8 B 0.95 3.2 0.3 1.3 0.25 2.8 0.8 With solder tab FJST 0.25 5.0 <Staggered, Large slider type> Circuit No.1 1.0 A C 1.1 <In-line, Reverse type> B 2.8 1.2 A C 5.0 1.65 FJST 3.2 Circuit No.1 0.25 2.8 1.3 0.8 With bosses B 2.8 0.95 Without solder tab 5.0 FJST 3.2 1.0 2.8 0.5 1.3 0.8 Circuit No.1 1.0 A C 1.1 Without bosses B 2.8 B 0.95 3.2 2.8 5.0 2.8 1.3 1.65 5.0 3.2 0.8 0.25 2.6 0.8 2 CONNECTOR Side entry type <In-line, Normal type> <In-line, Reverse type> 2.8 2.8 0.25 0.25 3.2 3.2 B B C A 1.1 Circuit No.1 0.7 2.8 FJST 2.8 FJST 5.0 0.7 0.25 5.0 1.0 0.25 FAZ Circuit No.1 1.0 A C Model No. Circuits In-line Normal type Staggered Reverse type Normal type With bosses Without bosses With bosses Without bosses In-line Large slider type With solder tab Without solder tab Normal type Reverse type A B C Top Side entry entry type type 8 - - - - - - - S08FAZ-SM-TB S08FAZ-RSM-TB 7.0 13.4 9.2 9 - - - - T09FAZ-SMT-TF - - S09FAZ-SM-TB 8.0 14.4 10.2 11 - - - - - - - S11FAZ-SM-TB S11FAZ-RSM-TB 10.0 16.4 12.2 - 2,000 16 - - - - - - - S16FAZ-SM-TB S16FAZ-RSM-TB 15.0 21.4 17.2 - 2,000 20 - - - - T20FAZ-SMT-TF - - S20FAZ-SM-TB S20FAZ-RSM-TB 19.0 25.4 21.2 1,000 2,000 22 - - - - T22FAZ-SMT-TF T22FAZ-SMT-F-TF T22FAZ-SMT-NF-TF - S22FAZ-RSM-TB 21.0 27.4 23.2 1,000 2,000 24 - - - - T24FAZ-SMT-TF - - - - 23.0 29.4 25.2 1,000 - 25 - - - - - - - S25FAZ-SM-TB - 24.0 30.4 26.2 - 2,000 25.0 31.4 27.2 26 - T26FAZ-SM-1-TB T26FAZ-SM-TB T26FAZ-RSM-1-TF T26FAZ-RSM-TF T26FAZ-SMT-TF T26FAZ-SMT-F-TF T26FAZ-SMT-NF-TF S26FAZ-SM-TB S26FAZ-RSM-TB Material and Finish Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Receptacle housing: PA 6T, UL94V-0, ivory (natural) Slider housing: PPS, UL94V-0, brown (natural) Solder tab: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed tape. 3 Q'ty / reel Dimensions (mm) Side entry type Top entry type - 2,000 1,000 2,000 1,000 2,000 FAZ CONNECTOR Lead section dimensions of FFC--------------------------------------------- 1.0x(N+1)0.07 1.0x(N-1)0.07 1.00.15 1.00.05 1.00.15 0.300.05 7.5min. 4.0min. 0.70.1 Reinforcing layer Note: N --- Number of circuits PC board layout (viewed from component side) ------------------------------------ Top entry type <In-line, Normal type> With bosses Without bosses 0.60.05 1.00.03 1.70.1 0.3 1.00.03 1.00.05 1.80.1 0.950.05 0 2---0.7 -0.1 1.3 2.40.1 0.55 3.20.1 0.60.05 1.60.1 1.60.1 Circuit No.1 3.00.1 Circuit No.1 <In-line, Reverse type> With bosses Without bosses 0.60.05 1.00.03 1.00.05 1.80.1 2.30.1 0.350.05 0.3 1.80.1 2.30.1 0.250.05 0 2---0.7 -0.1 1.60.1 1.60.1 <Staggered, Normal type> 1.60.1 1.60.1 <Staggered, Large slider type> With solder tab 1.00.05 Circuit No.1 0.9 2.60.1 0.350.1 2.60.1 1.00.05 0.60.05 Circuit No.1 0.350.1 0.60.05 Circuit No.1 0.35 Without solder tab 1.8 1.00.05 1.00.03 Circuit No.1 Circuit No.1 2.60.1 0.60.05 1.6 1.6 0.60.05 Note: 1. Tolerances are non-cumulative: 0.03mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 4 FAZ CONNECTOR PC board layout (viewed from component side) ------------------------------------ Side entry type <Normal type> <Reverse type> 1.00.05 1.00.05 0.60.05 1.90.1 Circuit No.1 0.850.05 2.20.1 0.850.05 0.1 0.1 Circuit No.1 1.90.1 1.50.1 1.50.1 0.60.05 2.20.1 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. Assembly layout ---------------------------------------------------------- Top entry type <In-line, Reverse type> <In-line, Normal type> 3.75 3.75 Contact point Contact point FFC 5.0 5.0 FFC <Staggered, Normal type> <Staggered, Large slider type> 4.45 3.75 Contact point Contact point FFC 5.0 5.0 FFC Side entry type 5.0 FFC Contact point Normal type 5 2.8 Reverse type 0.7