NOTES: 1. MATERIALS: HOUSING, COVER, AND TAIL ALIGNER: HIGH TEMPERATURE THERMOPLASTIC, UL94, V-O RATED, COLOR: BLACK TERMINAL: PHOSPHOR BRONZE ALLOY 35.40 BRACKET: BRASS SHELL: STEEL xejou INSERT: BRASS 24.82 WF 2. FINISHES: TERMINAL: 0,05-0.25 MICROMETERS GOLD FLASH IN CRITICAL AREA OVER 0.75 MICROMETERS MINIMUM PALLADIUM NICKEL _ ral hk CLASS C IN CRITICAL AREA, 1.87 MICROMETERS MINIMUM TIN IN SOLDER TAIL AREA, ALL OVER NICKEL. BRACKET: 5.0 MICROMETERS MINIMUM BRIGHT TIN. SHIELD: 3.81 MICROMETERS MINIMUM BRIGHT TIN OVER 1.27 MICROMETERS MINIMUM NICKEL OVER COPPER FLASH (OPTIONAL). CLASS B INSERT: 2.54 MICROMETERS MINIMUM NICKEL. 3. PRODUCT SPECIFICATION: PS-71425-9999, 4. PACKAGING SPECIFICATION: TRAY PACK PER PK-74337-001. SEE NOTE 8 CIRCUIT 68 5, APPLICABLE STANDARDS: EIA-700AOAF AND SFF-8441. CIRCUIT 35 42.70 CIRCUIT 34 AX DATE CODE: YR/WK PER EIA-476-A. CIRCUIT 1 \ M2 X 0.6 7. TORQUE TO INSTALL SCREWLOCKS INTO THREADED INSERTS: 37.7040.10 4g aN THREADED INSERT 0.37 Nm MAXIMUM . 4 oso yp. (4 PLACES) 8. PRODUCT COMPLIES WITH COSMETIC SPECIFICATION PS-45499-002, \ GROUNDING TABS SEE TOP VIEW FOR SURFACE CLASSIFICATIONS. L DL 7D FD 7D oD oo oo oe 2 4 __ : oO il CIRCUIT 1 GROUNDING TABS ~ TON HG CIRCUIT 35 -6.55 SEE DETAIL 1 VERSION 4 ONLY 10,84 VERSION f* cove /a\ 4 ONLY 11.83 12.77 if / \ CIRCUIT 34 CIRCUIT 68 32,35 _ 0.40 TYP>|[ | 2 PLACES " 407 FROM FACE OF SHELD VERSION 4 WITH COVER __| VERSION 4 ONLY sn eeeeeHEeeHhteHBHtHtHRHHEHEtad SHOWN ON THIS SHEET oneEeEeetpntenttintttttttuntud 222) Jquaury) GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 2 S58] |sympois| (UNLESS SPECIFIED) MM ONLY 3:1 | METRIC }O HBR ANG on ees mm INCH _| ORAWN BY DATE [TITLE @SRRRIZIW7-0 PLACES --- ]4-- KADAMS 04/8/27 SALES ASSEMBLY =o VHDCI STACKED _ ee Pe eee * 2 a O 3 PLACES|+--- [+--- CHECKED BY DATE peepee eee Se seai5| ? PLACES|+0.13. |4+--- BARKER 04/8/27 peepee eeeeeeeeee)e) aSx4ay 7PLACE [0.25 |+--- APPROVED BY DATE eee eee eee v32e2"|V0 0 PLACE [+ + ISMILLER 04/8/27 m [ xX LS 3 a 2 ANGULAR + 40 MATERIAL NO. DOCUMENT NO. SHEET NO. = e=8 DRAFT WHERE APPLICABLE] EE TABLE SD-74337-004 1_OF 4 /-0.8TYP Su ou _ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX | io WITHIN DIMENSIONS C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 10 frame ou | 12 | " 10 | 9 | 8 7 6 5 4 3 | 2 | 1 Rev. G 2012/01/1113 12 " 10 9 8 7 6 5 4 3 2 1 5.01 J 4.80 [| R+0.25 2.252025 \\ | | | relios FOR FRONT 4 a 2.44 20,25 | ows OF TAILS { po | | a FOR BACK 4 32.2 ROWS OF TAILS 5.08 H 5.26 F415 115+| eo 1.20 1.20 vs G 12.08 Detail1 23.39 SCALE 10:1 F VERSION 1 WITHOUT COVER SHOWN ON THIS SHEET ~~ NOTE: DIMENSIONS SHOWN ON SHEET 1 APPLY EXCEPT AS NOTED E CE | -_ - __ SEE Detail2 > TT l l l c NS _-| 3.82 SEE Detail1 I A9 1 sso QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE B S58) |sympocs| (UNLESS SPECIFIED) MM ONLY 4A METRIC | CleRoeECTION ness mm INCH _ | DRAWN BY DATE TTLE S SR R]z W =O 4 PLACES |+--- +--- KADAMS 04/8/27 SALES ASSEMBLY ws t 3 PLACES |+--- 4+--- CHECKED BY DATE VHDCI STACKED hessely WO DPLACes#013_|+- BARKER 04/8/27 too, & se 1 PLACE [0.25 |t--- [APPROVED BY DATE T3225) |W race + MILLER 04/8/27 molex A S382 ANGULAR + 1 |MATERIAL NO. DOCUMENT NO. SHEET NO. Ws ee DRAFT WHERE APPLICABLEL_SEE TABLE SD-74337-004 2 OF 4 Hugo MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX | ra WITHIN DIMENSIONS C [INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. G 2012/01/11 12 11 10 9 8 7 6 5 4 3 | 2 | 113 | | * | 12 10 | 9 | 8 7 6 | 5 | 4 | 3 | 2 | 1 <_ < t DETAIL 2 DETAIL 1 BACKGROUND GMITTED FOR CLARITY} (BACKGROUND OMITTED FOR CLARITY) RETE : BOARD RETENTION: PRESS FIT THIoKuess [COVER] R DIM. | T DIM. SOREWLOOKS 7'16327-0002 GROUNBING | ogee _ INCLUDES LOOSE PACKED | oon nag] apr SEE DRAWING SD-71433-005 THICKNESS |COVER| R DIM. | T DIM. soe opaeeis 3 wos TABS NUMBER 1.6020.16 | YES | 2.30 | 2.48 No YES 74337-0911 - = 1.6020.16 | YES | 2.30 | 2.48 NO YES 1.60#0.16 | YES 2.08 No YES 74337-0912 - 1.6020.16 | YES 2.08 NO No 74337-0951 1600.16 | NO 2.30 | 2.48 No YES 74337-0915 - | 1600.16 | NO | 230 | 2.48 YES 1,600.16 NO 2.08 NO YES * NO 1.6020.16 | NO 2.08 YES 1.6020.16 | YES | 2.30 | 2.48 YES YES * NO 1600.16 | YES 2.08 NO YES 1.602016 | YES 2.08 YES YES 1.6020.16 | YES | 2.30 | 2.48 YES YES 1.60#0.16 | NO 2.30 | 2.48 YES YES 1.602016 | YES 2.08 YES YES 1.6020.16 | NO 2.08 YES YES 1.602016 | NO 2.30 | 2.48 YES YES 2.360.16 | YES | 3.44 | 3.62 NO YES 1,600.16 NO 2.08 YES YES 2.3620.16 | NO 3.44 | 3.62 No YES 2.36:0.16 | YES | 3.44 | 3.62 NO YES 74337-0952 2.360.16 | YES | 3.44 | 3.62 YES YES 74337-0972 2.36:0.16 | NO | 3.44 | 3.62 No YES 2.3620.16 | NO 3.44 | 3.62 YES YES 2,3620.16 | YES | 3.44 | 3.62 YES YES 1.60:0.16 | YES 2.08 INSTALLED ON PART YES 2.36:0.16 | NO | 3.44 | 3.62 YES YES 1.60:0.16 | YES 2.08 INSTALLED ON PART YES ssc QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE S58] |sympocs| (UNLESS SPECIFIED) MM ONLY 3:1 METRIC | CleRoECTION ~ = = = mm INCH DRAWN BY DATE TITLE S88 8\2/7-0 pacesie--- 1a KADAMS 04/8/27 SALES ASSEMBLY Oo = 3 E 3 PLACES|It--- |+--- CHECKED BY DATE VHDC| STACKED tS mealGlWO [7 PLacesiO73 [# _BBARKER 04/8/27 wowoxs 4 1 PLACE [40.25 +--- APPROVED BY DATE | tS 2s) | rae t MILLER 04/8/27 moex OPTIONAL SCREWLOCK WI Sg 26 e ANGULAR + 1 MATERIAL NO. DOCUMENT NO. SHEET NO. 71433-0002 Woes DRAFT WHERE APPLICABLE|L SEE TABLE SD-74337-004 3 OF 4 Mua a SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX | # WITHIN DIMENSIONS C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ib-frame CF AMT 12 1 10 9 8 7 6 5 2 Rev. G 2012/01/11 } 4 33 12 | 1 | 10 | 9 | 8 | 7 6 5 4 | 3 | 2 1 @ 0.652005 PLATED CIRCUIT 68 | 3.91 : | _ 555 eo CIRCUIT 34 197 * (136 PLACES) CIRCUIT 1 750 __ , = pone me r CIRCUIT 2 TYP. [1.15] >y] | | | z [1.15] 4 . _ . . _ oo0o0o0o000000 000 0000 CIRCUIT 2 | > eee eee ee eee o; 15 DA ARAIRATAAIIIIES CIRCUIT 1 ___ [5-6 -h-b-o-b-b OO h-hh Ga | 00000000000000000 a 0-0-4 0-0-6 + | (oo MoM Mo Mo MoM Mo MoMeoM eM oMoMeoMole) ___]} __ ! | ee veer te / OP | | Et | eoo0o00000000 0000000 | & AESees eee e eee ee oe 7 iS oo eee ee eeeeessssen me | Ly OO 66-66-6666 -6-6-6-6-6 =A 115 ; eo0000DD00000000000 6.30MAX. 2.74 CIRCUIT 68 I \J La] oe TT | & / CIRCUIT xo \. 4.77] BOARD EDGE @ 1.20#0.08 PLATED 0.5 Op -- -- -- -- -- CIRCUIT 34 ll fo20 CIRCUIT 35 one @ 1750.08 PLATED _ (4 PLACES) 6190.15 @X) VERSION 1 + [0.40 RECOMMENDED PCB LAYOUT 278) -} oe (2 PLACES) COMPONENT SIDE SHOWN 7 32.35 [yY }< VERSION 4 [A }~-34.70 _ 2.06 +0.08 3770 RECOMMENDED PCB LAYOUT * COMPONENT SIDE SHOWN 2.06 +0.08 34.70 fP]0.16 AB (4 PLACES) 10.72 40.08 yt ! f [5.84 0.47 0.08 TT { > | felon 4.88 #0,08 | 5.84 | (2 PLACES) T $ e Yeu raps a |B | 3770 (4 PLACES) PANEL OPENING PER SFF-8441 SPECIFICATION RECOMMENDED PANEL OPENING SCALE 2:1 NOTES: +3164. _>-| A SCALE 2:1 4. FOR FULL MATE WITH PLUG, PANEL THICKNESS SHOULD NOT EXCEED 1.0mm. FUNCTIONAL MATING WITH MOLEX PLUG CAN STILL BE MAINTAINED WITH PANELS AS THICK AS 2.5mm (BUT PLUG AND RECEPTACLE WILL NOT BE FULLY MATED). 222] JouAmy) GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SSS ee UNLESS SPECINED) MM ONLY a1 | metric |OCIPERR ANS mew mm INCH BRAWN BY DATE TITLE 2. GUIDELINES FOR CHOOSING A MOLEX SCREWLOCK: SRRA|2/07-0 [CPLACESIE=-- | E--= _ RKADAMS 04/8/27 SALES ASSEMBLY Ss g x = = oS & 3 PLACES |+--- +--- CHECKED BY DATE VHDCI STACKED PANEL THICKNESS RECOMMENDED SCREWLOCK HS_. lel WO Spacestoas ee BARKER 04/8/27 uso ols = = mo eye o|y TPLACE [0.25 |4+--- APPROVED BY DATE LESS THAN OR EQUAL TO 4.00 MM 71433-0002 TS32eS"|VO aa + SMILLER 04/8/27 mi i > i 8 % 2 8 ANGULAR +4 MATERIAL NO, BOCUMENT NO. Oo e SHEET NO. jor ro 2 7ma53 0010 Wh ae DRAFT WHERE APPLICABLE|_SEE TABLE SD-74337-004 4 0F 4 Ww oo = MUST REMAIN SZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX | ig WITHIN DIMENSIONS ( |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T Rev. G 201/60" 12 11 10 9 8 7 6 5 | 4 3 | 2 | 413 12 1 10 35.40 24,82 D ( CIRCUIT 35 CIRCUIT 1 oN | -0.80 TYP. 42.70 37.70 40.10 CLASS C SEE NOTE 7 CLASS B CIRCUIT 68 CIRCUIT 34 M2 X 0.4g THREADED INSERT (4 PLACES) CIRCUIT 34 CIRCUIT 68 0.4 ne C CJ 32.35 for CODE /\ CIRCUIT 1 | 4.07 CIRCUIT 35 2 PLACES FROM FACE OF SHIELD GROUNDING TABS.5 GROUNDING VERSION 4, WITH COVER NOTES: 1. MATERIALS: HOUSING, COVER, AND TAIL ALIGNER: HIGH TEMPERATURE THERMOPLASTIC, UL94, V-O RATED, COLOR: BLACK TERMINAL: PHOSPHOR BRONZE ALLOY BRACKET: BRAS SHELL: STEEL INSERT: BRASS 2, FINISHES: s TERMINAL: 0.05-0.25 MICROMETERS GOLD FLASH IN CRITICAL AREA OVER 0.75 MICROMETERS MINIMUM PALLADIUM NICKEL IN CRITICAL AREA, 1.87 MICROMETERS MINIMUM TIN IN SOLDER TAIL AREA, ALL OVER NICKEL. BRACKET: 5.0 MICROMETERS MINIMUM BRIGHT TIN. SHIELD: 3.81 MICROMETERS MINIMUM BRIGHT TIN OVER 1.27 MICROMETERS MINIMUM NICKEL OVER COPPER FLASH (OPTIONAL). INSERT: 2.54 MICROMETERS MINIMUM NICKEL. 3. PRODUCT SPECIFICATION: PS-71425-9999, 4, PACKAGING SPECIFICATION: TRAY PACK PER PK-74337-001. 5. APPLICABLE STANDARDS: EIA-700AQAF AND SFF-8441. A\ DATE CODE: YR/WK PER EIA-476-A. 7. PRODUCT COMPLIES WITH COSMETIC SPECIFICATION PS-45499-002. SEE FIGURE AT LEFT FOR SURFACE CLASSIFICATIONS. 8. TORQUE TO INSTALL SCREWLOCKS INTO THREADED INSERTS: 0.34 Nm MAXIMUM. ( L x TABS a ry I6.55 VERSION 4 ONLY 10.84 l Tm } SEE DETAIL 1 VERSION 4 ONLY ' : ) |] ne VERSION 4 ONY SHOWN ON THIS SHEET , i . . . . . . . _ . . . _ _ . . _ ' nw See QUALITY) GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | a THIRD ANGLE Ce ee | 5 sss SYMBOLS| (UNLESS SPECFIED) _ MM ONLY at METRIC PROJECTION RSsss mm Cl bs RRR21%7-0 [CPLACESE--- [E-- SAMPSON (05.08.2004 VHDCI STACKED ASSEMBLY eee eee eee 2 a 3 PLACES |#7"7 [77> CHECKED By pate I peepee eee eo See WO 2 PLACES 0.13 + MBANAK |S 05.06.2001 eee eee eee oo 9% 5 1 PLACE [0.25 |=--- peepee ee eee eee |e) 35 =sS= W-0 0 PLACE |+ BANAK |S 05.08.2001 molex eSoeee ANGULAR + 1 MATERIAL NO. DOCUMENT NO. SHEET NO. So eLe DRAFT WHERE APPLICABLE|_SEE TABLE SD-74337-014 1 OF 4 | 0.8 TYP. Ho Oi =e > MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 5S rd WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f -_C_P_AM_T| Rev. @ 2012/01 | 12 | 1 10 8 7 6 5 4 3 | 2 | 13 12 1 10 9 8 7 6 5 4 3 2 4 5.01 J 4.80 | Et I | | I I I 1 | R#0.25 2.25 20,25 | | | FOR FRONT 4 T 20.25 | 2.4420.25 | ROWS OF TAILS 1 | 32.2 | FOR BACK 4 ROWS OF TAILS H 5.30 5.08 1.145 145~ l rns 1.20 4.20 G h- 1.15 [| tHe JAGR EER | 12.08 7 i uF Detail SCALE 10:1 F E Co ee CU UE CLE CL CL Yd: Ct | ___ -_ - SEE Detail2 \dlbe, TI ] l I I c L XC i | 3.92 SEE Detail1 i 419 1 S3sr QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE B sss MM ONLY ; Oc VERSION 1 WITHOUT COVER Be ee Sr [INCH [oma Dae ey ASSEMBLY SSSR == a SHOWN ON THIS SHEET =o (BW [eBLaCES}e = eS ON _05-0 2004 OT xO a L. as < NOTE: DIMENSION SHOWN ON SHEET 1 TS Seas wo eee MBANAK IS __09.08. 2001 a)o =U, <= APPLY EXCEPT AS NOTED. tS2se) 7 rack t BANAKIS 05.08.2001 molex A S288 ANGULAR + 1 MATERIAL NO. DOCUMENT NO. SHEET NO. Wo eee DRAFT WHERE APPLICABLEL_SEE TABLE SD-74337-014 2 OF 4 Mu oo MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX S uy WITHIN DIMENSIONS C INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T Rev. 6 2072/01/11 12 1 10 9 8 7 6 3 | 4 3 | 2 | 1B | 12 | "1 | 10 | 9 | 8 7 | 6 | 5 | 4 | 3 | 2 | 1 oo o Z| L] ' i DETAIL 2 u (BACKGROUND OMITTED FOR CLARITY) DETAIL 1 (BACKGROUND OMITTED FOR CLARITY) BOARD RETENTION: SNAP FIT PO INCLUDES LOOSE PAOKED | oo ning PART BOARD RETENTION: PRESS FIT THICKNESS |COVER|R DIM. | T DIM. | SCREWLOCKS 71433-0002 TABS NUMBER POB INCLUDES LOOSE PACKED | gonwionig PART SEE DRAWING SD-71433-005 THICKNESS | COVER] R DIM. | T DIM. SoREMLOCKS 1433-0002 : TARS NUMBER 1.6020.16 | YES | 2.30 | 2.48 NO YES 74337-0011 1600.16 | YES | 2.30 | 2.48 NO YES 74337-0050 1.6020.16 | YES 2.08 No yes | 74337-0012 * 1.6020.16 | YES 2.08 NO NO 74337-0051 1.6020.16 | NO 2.30 | 2.48 NO YES 74337-0015 coo | No o50 | on - vs 3370050 POUL, . { 1.6020.16 | NO 2.08 NO YES 74337-0016 1.6020.16 | NO 2.08 NO YES 74337-0061 1.6020.16 | YES | 2.30 | 2.48 YES YES 74337-0037 * 1,600.16 | YES 2.08 YES YES | 74337-0038 160r076 | YES 2.08 NO YES _| 74337-0066 .OUtU, _ -{ 16020.16 | YES | 2.30 | 2.48 YES YES 74337-0053 1.6020.16 | NO 2.30 | 2.48 YES YES 74337-0039 te0-016 | No 508 YES YES 71337-0040 1.6020.16 | YES 2.08 YES YES 74337-0054 je it, a -( 1.6020.16 | NO 2.30 | 2.48 YES YES 74337-0063 2.3620.16 | YES | 3.44 | 3.62 NO YES 74337-0070 | 2.3620.16 | No | 3.44 | 3.62 NO yes | 74337-0071 160:016 | NO 2.08 ves. YES _| 74337-0064 O40, . 1. _ 2.36:0.16 | YES | 3.44 | 3.62 NO YES 74337-0052 2.3620.16 | YES | 3.44 | 3.62 YES YES 74337-0072 2.36:0.16 | NO 3.44 | 3.62 NO YES 74337-0062 2.3620.16 | NO 3.44 | 3.62 YES YES 74337-0073 2.3620.16 | YES | 3.44 | 3.62 YES YES 74337-0055 1.6020.16 | YES 2.08 INSTALLED ON PART YES 74337-1038 2.3620.16 | NO 3.44 | 3.62 YES YES 74337-0065 1.6020.16 | YES 2.08 INSTALLED ON PART YES 74337-1054 Sst QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE 558] |sympocs| (UNLESS SPECIFIED) MM ONLY 31 METRIC | Cl eRoECTION nees mm INCH _ | DRAWN BY DATE TITLE 5S R8/2/97-0 [7 PLACES|E---_[4-- SAMPSON 05.08.2004 VHDCI STACKED ASSEMBLY Zo 5 3 PLACES|t--- |+--- CHECKED BY DATE ES aeels| WO [ZPLAces[to1s |+--- MBANAKIS 05.08.2001 SYyuiiu Es +--- APPROVED BY DATE 3 282"/W70 OPLAE EE BANAKIS 05.08.2001 molex OPTIONAL SCREWLOCK s 28 e ANGULAR + 1 MATERIAL NO. DOCUMENT NO. SHEET NO. 71433-0002 Woe=t DRAFT WHERE APPLICABLEL__ EE TABLE SD-74337-014 3 0F 4 Mw oo = UST REMAIN SIZE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Ss B WITHIN DIMENSIONS C INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION {b_frame_C_P_AM_T Rev. @ 2012/0111 2 " 10 9 8 7 6 4 4 3 | 2 | 113 12 | "1 | 10 | 9 | 8 | 7 6 5 4 3 2 1 0.6540.05 PLATED a (o)F00 My CIRCUIT 68 CIRCUIT 34 (136 PLACES) CIRCUIT 1 7150 1.60 CIRCUIT 2 TYP. l ry] TI cecur 2 $4444444644/8 soos oe soo Soo SOON CIRCUIT 1 eee ee ere wv, = | MOOD ODODOOODOO0O $-O-O-O > 6 6-0-6 eocoo0000cco COCO COC0d 4 -[1.20 18.99 r 35 60 [B20 cS | ri ooogoogooo0o0g00qg00o0qo0qg0qoo0ooc0o0og90 ' 1 & ASeeP eee EEI EES ct Tf Sey | LT / Ro ooooo oo oo o-oo og ef ET 00000000000000000 6.30 MAX. | [ 630MAX. J | rn CIRCUIT 68 . . / CIRCUIT ae! L77] BOARD EDGE L J @ 1.20+0.08 PLATED CIRCUIT 34 [0.20 CIRCUIT 35 @ PLACES) % 175+0.08 PLATED VERSION 1 | 0.40 YW RECOMMENDED PCB LAYOUT 278J o-& COMPONENT SIDE SHOWN (2 PLACES) 32.35 VERSION 4 SAME AS VERSION 4 EXCEPT AS SHOWN RECOMMENDED PCB LAYOUT COMPONENT SIDE SHOWN 2.06 0.08 = [A }e- 4.20 ___ : 34.70 2.06 20.08 0.16A)B] (4 PLACES) 10.72 +0.08 EI ___] , a ! 3,78 20.08 ; T [5.84 { le. f EL > 5.84 | . 4,8840.08 f $ e 1 (2: PLACES) DN eu RADIUS cB] 770 (4 PLACES) 31.64 RECOMMENDED PANEL OPENING PANEL OPENING PER SFF-8441 SPECIFICATION 4, FOR FULL MATE WITH PLUG, PANEL THICKNESS SHOULD NOT EXCEED 1.0mm. FUNCTIONAL MATING WITH MOLEX PLUG CAN STILL BE MAINTAINED WITH PANELS AS THICK AS 2.5mm (BUT PLUG AND RECEPTACLE WILL NOT BE S82) [ouauity GENERAL TOLERANCES NM ONLY a | METRIC | al THIRD. ANGLE FULLY MATED). S58) |symBois : b = s = mm INCH DRAWN BY DATE TITLE 2. GUIDELINES FOR CHOOSING A MOLEX SCREWLOCK: 8 2) -O [4 PLACES|e--- [=== BSAMPSON __05.08. 2004 VHDCI STACKED ASSEMBLY 2 a 0 3 PLACES|+ --- +--- CHECKED BY DATE PANEL THICKNESS RECOMMENDED SCREWLOCK FS aeels| WO [ZPLACESO13 [#--- MBANAKIS 05.08.2001 we Ze alse [PLACE [b0.25 |e" Perroven sy Date | LESS THAN OR EQUAL TO 1.00 MM 71433-0002 w~ saz 0 PLACE [+ + BANAKIS 05.08.2004 moiex Ww 3 Ss S e ANGULAR + 4 MATERIAL NO. IDOCUMENT NO. SHEET NO. 401 TO 2.15 MM 71433-0010 We eo DRAFT WHERE APPLICABLE|_2EE TABLE SD-74337-014 4 OF 4 iw Oo el _ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Ss iB WITHIN DIMENSIONS C [INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T Rev. G 201/601 2 1 10 9 8 7 6 5 | 4 3 | 2 | 1| VERSION 4 ONLY 13 12 " 10 9 8 7 6 5 4 | 3 2 1 35,40 NOTES: 1. MATERIALS: HOUSING, COVER, AND TAIL ALIGNER: GLASS FILLED LIQUID CRYSTAL POLYMER (LCP), UL94V-0 RATED, COLOR: BLACK | TERMINAL: PHOSPHOR BRONZE ALLOY BRACKET: BRASS oN SHELL: STEEL x@jow INSERT: BRASS 24.82 SZ 2. FINISHES: TERMINAL: 0.76 MICROMETER MINIMUM GOLD IN THE CRITICAL + CLASS C CONTACT AREA, 2.54 MICROMETERS MINIMUM MATTE TIN IN THE SOLDER TAIL AREA, ALL OVER A 127 MICROMETER MINIMUM NICKEL UNDERPLATE SEE NOTE 7 BRACKET: 1.01 TO 2.54 MICROMETER MATTE TIN SHIELD: 2.54 MICROMETERS MINIMUM NICKEL INSERT: 2.54 MICROMETERS MINIMUM NICKEL CLASS B 3. PRODUCT SPECIFICATION: PS-71425-9999. 4. PACKAGING SPECIFICATION: TRAY PACK PER PK-74337-001. CIRCUIT 68 5. APPLICABLE STANDARDS: EIA-700A0AF AND SFF-8441. CIRCUIT 35 42.70 CIRCUIT 34 A\ DATE CODE: YR/WK PER EIA-476-A. 7, PRODUCT COMPLIES WITH COSMETIC SPECIFICATION PS-45499-002. CIRCUIT \ b_ $37.79 20,10 M2 X 0.49 SEE FIGURE AT LEFT FOR SURFACE CLASSIFICATIONS. THREADED INSERT 8. TORQUE TO INSTALL SCREWLOCKS INTO THREADED INSERTS: | > O80 TYP. (4 PLACES) 0.34 Nm MAXIMUM. GROUNDING TABS 1.83 12.77 L 11.79 VERSIONS. WITH " (| | COVERS L 1 . CIRCUIT 34 A SAAR CIRCUIT 1 GROUNDING TABS _ I! | | KW CIRCUIT 68 | | CIRCUIT 35 } 32,35 -6.55 SEE DETAIL 1 VERSION 4 ONLY 10.84-+ VERSION 0.4TYP. r 7 DATE CODE L\ 4 ONLY [7] | pty prow eace or sHeco VERSION 4, WITH COVER | fe 2 2 2 oe Peng I SHOWN ON THIS SHEET oHonHEentptntintttntttututud ) oeeeeeee eee eeeee)?) U wn ss S QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE ee eeeeeeeeeeeeege 6 S58) |sympors| (UNLESS SPECIFIED) MM ONLY 3:1 METRIC cq] PROJECTION 2 Nm = = = mm INCH DRAWN BY DATE TITLE | HS 22/2'W7-0 PASE lz BARKER 6/19/2009 VHDCI DUAL STACK ee | Ew & 3 PLACES|+--- [+--- CHECKED BY DATE RECEPTACLE ASSEMBLY I peepee eee eee) & oS ee 5 WO 2 PLACES|+ 0.13 [+--- BARRA 6/19/2009 NO BRIGHT TIN pHEEeHeEeHeeHeEe eee ee|e||e! oo 3 = = Ww 4 PLACE [0.25 |+--- APPROVED BY DATE eee ees ~ Seas) |W [optace it~ e=-=BMILLER 2010/03/31 molex ad 3 3 a ANGULAR + 1 MATERIAL NO. DOCUMENT NO. SHEET NO. SO Eee DRAFT WHERE APPLICABLE|_SEE TABLE SD-74337-017 1 OF 4 1FO8TYP. Bu oo <a SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX G & WITHIN DIMENSIONS C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION th_frame_C_P_AM_T Be saazott | 12 "1 10 9 8 7 6 5 4 3 | 2 | 1B | 12 | " 10 | 9 8 7 | 6 | 5 | 4 | 3 2 | 1 32.2 5.01 4.80 | I I | I | | 2.25 +0.25 | | | 2.44 20.25 : | ! T+0.25 Rs0.25 | | ae 23.39 / FOR BACK 4 ROWS OF TAILS FOR FRONT 4 ROWS OF TAILS 5.30 5.08 1.15 ~| 115 115 120 1.20 /-1.15 /k-. 31.65 2 PLACES - TYPICAL 12.08 ~~] Detail1 2522 4 PLACES R10 - 8 PLACES SCALE 10:1 [ 2 PLACES te EZ | APPLIES TO ob ( SEE Detail2 ~ = om .78 ALL VERSIONS WITHOUT COVERS a | 3.92 L AC SEE Detail1 I 2 PLACES 2.34+0.20 FROM FACE OF SHIELD ee -F VERSION 1 ONLY VERSION 1, WITHOUT COVER a beHEeetetntt abet eaift tee a SHOWN ON THIS SHEET / . J O NOTE: DIMENSIONS SHOWN ON SHEET 1 ee APPLY EXCEPT AS NOTED. eu Cc] mn ss S QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE eee eee SSS] lsympots) (UNLESS SPECIFIED) MM ONLY 41 | METRIC | SERRE ANG BHEeHeEeEHEenHEentEertnhittitig# noses mm INCH DRAWN BY DATE TITLE ; epee eee eee : Ss SS 81Zz//-0 % PLACES | --- +--- BARKER 6/19/2009 VHDC| DUAL STACK seem =o = 3 PLACES + --> |ho=> [CHECKED BY DATE RECEPTACLE ASSEMBLY PSceeale|WO [ZPLAcesizo7s [e--- MIBARRA 6/19/2009 NO BRIGHT TIN fo 8 = = Ww 1 PLACE +0.25 +--- [APPROVED BY DATE ES aes |W [orate e--- [e BMILLER 2010/03/31 molex WI gS 3 a @ ANGULAR +1 MATERIAL NO. DOCUMENT NO. SHEET NO, We eee DRAFT WHERE APPLICABLE|_SEE TABLE SD-74337-017 2 0F 4 Wi So tl MUST. REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX G g WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb-frame out 12 1 10 9 8 7 6 5 4 3 | 2 | 1 Rev. G 2012/01/11a | 12 | 1" | 10 | 9 | 8 7 | 6 | 5 | 4 | 3 | 2 | 1 ZN at oy Z| 1 1 i DETAIL 2 o (BACKGROUND OMITTED FOR CLARITY) DETAIL 1 BOARD RETENTION: SNAP FIT (BACKGROUND OMITTED FOR CLARITY) INCLUDES LOOSE PACKED BOARD RETENTION: PRESS FIT PCB GROUNDING | _ PART THICKNESS | COVER | R DIM. | T DIM. SCREWLOCKS 71433-0002 TABS NUMBER INCLUDES LOOSE PAGKED SEE DRAWING SD-71433-005 THieguess [COVER] R DIM.|}T DIM.| SCREWLOCKS 71433-0002 | ORQUNDING | | FART 16020.16 | Yes | 230 | 248 No YES SEE DRAWING SD-71433-005 1.6020.16 YES 2.08 NO YES 1.60+0.16 YES | 2.30 | 2.48 NO YES 1602016 | No | 230 | 2.48 NO YES | 74337-4015 tense | WES 2.08 NO NO 1602016 | NO 708 NO YES 1.60:0.16 | NO | 2.30 | 2.48 NO YES 1.6020.16 | YES | 2.30 | 2.48 YES YES 1602016 | NO 2,08 NO YES 1.6020.16 | YES 2.08 YES YES 1600.16 | YES 2.08 NO YES 1.60+0.16 No 2.30 | 2.48 YES YES 1.6020.16 YES 2.30 | 2.48 YES YES 1.60#0.16 No 2.08 YES YES 1.6020.16 YES 2.08 YES YES 2.3630.16 | YES | 3.44 | 3.62 No YES weoso.16 | no | 230 | 2.48 YES YES 2.3620.16 | NO | 344 | 3.62 No YES 74337-4071 cL 2.08 YES YES 2360.16 | YES | 3.44 | 3.62 YES YES 2962016 | YES | 344 | 362 NO YES 536:016 | no | 344 | 362 YES YES 2.36:0.16 | NO | 3.44 | 3.62 NO YES 1600.16 | YES 2.08 INSTALLED ON PART YES 2362016 | YES | 3.44 | 3.62 YES YES 2.36:0.16 | NO | 3.44 | 3.62 YES YES 1.60:0.16 | YES 2.08 INSTALLED ON PART YES 222] Tquatity]) GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE S58] |sympocs| (UNLESS SPECIFIED) MM ONLY 3:1 METRIC | Cl eRoveCcTION S See mm INCH _ | DRAWN BY DATE TITLE SAR R/2/W/7=0 [PLACES|E---__[4--- __BBARKER 6/19/2009 VHDCI DUAL STACK wo fr 3 PLACES|+--- _|[+--- __ [CHECKED BY DATE RECEPTACLE ASSEMBLY ES aeels|W~O [ZPcacesito7s [+--- MIBARRA 6/19/2009 NO BRIGHT. TIN we Se 5|~7-p [PLACE [0.25 [#-- [APPROVED BY DATE TS 28=)|0 0 [opracee- |e BMILLER 2010/03/31 m l xX OPTIONAL SCREWLOCK U2 SBa _ WwW S => Sg rd ANGULAR + 1 MATERIAL NO. DOCUMENT NO. SHEET NO, 71433-0002 Wy eee DRAFT WHERE APPLICABLE|_SEE TABLE SD-74337-017 3 OF 4 Mii OG a _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX G i WITHIN: DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| 12 1 40 8 7 6 5 4 5 | 2 | ' Rev. G 2012/01/11.13 12 | "1 | 10 | 9 | 8 | 7 6 5 4 3 2 1 0,6540.05 PLATED | 391 | 20.100] CIRCUIT 68 CIRCUIT 34 1 t[2.98] (136 PLACES) CIRCUIT 1 7150 | ~[0.80]TYp. 1.60 CIRCUIT 2 | 41.274 TYP. ry] & |004944046044646640 SOTTO OOO OOOO CIRCUIT 2 ooo0oo0ooco0go0go0oo0ooqo0qo0qo 0 00 00 CIRCUIT 1 Lp shee, y 1.15 0000009000000 0000. POO OOOO OOF OOOO | J oo000000000000000 18.99 r 335 -| pel = fee CS p U20 | 38 | p- -O-- 0 6-6 6-6-6 6-6 O16 6-6-6 oo Mo Moe Mo MoM MoM MoM eMeoM MoM ole) 1 & ASS ese ee eee eee ery CT. & oo eeessesesesseso & | | pert THESE HHO OOOO oo of Nt a 00000000000000000 { 6.30 MAX. [ | nt CIRCUIT 68 | | 6.30MAX. | ; / CIRCUIT sel LIT] BOARD EDGE L J @ 1.20+0.08 PLATED CIRCUIT 34 [0.20 CIRCUIT 35 LU $ 1.75+0.08 PLATED VERSION 1 | 0.40 RECOMMENDED PCB LAYOUT 278JN, xk COMPONENT SIDE SHOWN (2 PLACES) 32.35 VERSION 4 SAME AS VERSION 4 EXCEPT AS SHOWN RECOMMENDED PCB LAYOUT COMPONENT SIDE SHOWN 2.06 0.08 [A }+-3.70 37.70 34,70 2,06 0.08 0.16[AB] (4 PLACES) 10.72 +0.08 a] [6] | 1 4 3.78 +0,08 f [584 ep. fe 0.16 B)A] 5.84 | . 4.88 20.08 j e e 1 (2 PLACES) Dune RADIUS r 3770 (4 PLACES) 31.64 RECOMMENDED PANEL OPENING PANEL OPENING PER SFF-8441 SPECIFICATION 4. FOR FULL MATE WITH PLUG, PANEL THICKNESS SHOULD NOT EXCEED 4.0mm. FUNCTIONAL MATING WITH MOLEX PLUG CAN STILL BE MAINTAINED WITH ES SOONG PANELS AS THICK AS 25mm (BUT PLUG AND RECEPTACLE WILL NOT BE SS] |Quaity FULLY MATED), mm S52] |sympors| (UNLESS SPECIFIED) MM ONLY 3:1 | METRIC lOc ER A ION nwwew mm INCH DRAWN BY DATE TITLE 5 8 Rlz2/67-0 places --- 14--- BARKER 6/19/2009 VHDCI DUAL STACK 2, GUIDELINES FOR CHOOSING A MOLEX SCREWLOCK: -& ig wo 4 PLACES Efe ee et RECEPTACLE ASSEMBLY = o PANEL THICKNESS RECOMMENDED SCREWLOCK WS 5 & le W Z PLACES [0.13_[ MIBARRA ___6/19/2009 NO_BRIGHT TIN wosxsais +0. t--- LESS THAN OR EQUAL TO 1.00 MM 71433-0002 a> A= WO [optace == [t= MILLER 2010/03/31 molex WwW 3 SAX ANGULAR +40 MATERIAL NO. IDOCUMENT NO. SHEET NO. 4.01 TO 2.15 MM 74433-0010 We eo DRAFT WHERE APPLICABLEL_SEE TABLE SD-74337-017 4 OF 4 AW Soe _ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX G ag WITHIN DIMENSIONS C [INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T Rev. G 201/601 2 1 10 9 8 7 6 5 | 4 3 | 2 | 1