ZLK MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ZLK SERIES 105 105 Ultra High Ripple, Low Impedance. FEATURES * 1054000~5000 Load Life : 105 40005000 hours. * RoHS RoHS compliance. SPECIFICATIONS Items Characteristics (mm) SLEEVE(PET) d 0.5 DIMENSIONS 40105 F Category Temperature Range 1035V.DC Rated Voltage Range LMAX 20% (20120Hz) Capacitance Tolerance I0.01CV (2) Leakage Current (MAX) I0.01CV C (F) Leakage Current (tan) (V) Rated Voltage 10 16 25 35 tan 0.19 0.16 0.14 0.12 Dissipation Factor (MAX) V (V) Rated Capacitance Rated Voltage (20120Hz) After life test with rated ripple current at conditions stated in the table below, the capacitors shall meet the following requirements. Endurance 25% Within 25% of the initial value. 200% Not more than 200% of the specified value. Not more than the specified value. Capacitance Change Dissipation Factor Leakage Current 10 16 25 35 ( ) Z(25)/Z(20) 2 2 2 2 Impedance Ratio (MAX) Z(40)/Z(20) 3 3 3 3 STANDARD SIZE WV (V.DC) 10 (1A) Impedance Cap Size (F) (DxL) Ripple 20 -10 680 8x16 2050 0.059 0.18 680 10x12.5 2190 0.053 0.16 1000 8x20 2380 0.041 0.13 1000 10x16 2550 0.038 0.12 1500 10x20 2880 0.028 0.084 1800 10x25 3160 0.024 0.072 Coefficient 120 1k 10k 100k 0.30 0.70 0.90 1.00 Size DXL(mm) Ripple current(mA r.m.s./105,100kHz),Impedance( Max/100kHz) Impedance Size Cap (F) (DxL) Ripple 20 -10 470 8x16 2050 0.059 0.18 560 10x12.5 2190 0.053 0.16 16 680 8x20 2380 0.041 0.13 (1C) 820 10x16 2550 0.038 0.12 1200 10x20 2880 0.028 0.084 1500 10x25 3160 0.024 0.072 WV (V.DC) Code PET Sleeve 3.5 5.0 L16 :=1.5 L20 :=2.0 (120Hz) OPTION PET 10 0.6 (hrs) Case Size Life Time 8x16, 8x20 4000 10x12.5 10x16,10x20 5000 10x25 (V) Rated Voltage Low Temperature Stability 8 Frequency Coefficient (Hz) 105 D d D0.5MAX MULTIPLIER FOR RIPPLE CURRENT Frequency 4MIN F (After 2 minutes) I (A) 15MIN Blank PART NUMBER ZLK M Rated Voltage Series Rated Capacitance Capacitance Tolerance DxL Option Lead Forming Case Size Impedance Cap Siz e (F) (DxL) Ripple 20 -10 330 8x16 2050 0.059 0.18 390 10x12.5 2190 0.053 0.16 25 470 8x20 2380 0.041 0.13 (1E) 560 10x16 2550 0.038 0.12 820 10x20 2880 0.028 0.084 1000 10x25 3160 0.024 0.072 220 8x16 2050 0.059 0.18 220 10x12.5 2190 0.053 0.16 35 270 8x20 2380 0.041 0.13 (1V) 330 10x16 2550 0.038 0.12 470 10x20 2880 0.028 0.084 560 10x25 3160 0.024 0.072 WV (V.DC)