To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
©2007 Fairchild Semiconductor Corporation 1www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
November 2013
FGH30N60LSD
600 V, 30 A PT IGBT
Features
Low Saturation Voltage: VCE(sat) = 1.1 V @ IC = 30 A
High Input Impedance
Low Conduction Loss
Applications
Solar Inverter, UPS
General Description
Using Fairchild's advanced PT technology, the FGA30N60LSD
IGBT offers superior conduction performances, which offer the
optimum performance for medium switching application such as
solar inverter, UPS applications where low conduction losses
are the most important factor.
Absolute Maximum Ratings
Notes :
(1) Repetitive rating : Pulse width limited by max. junction temperature
Thermal Characteristics
Symbol Description Ratings Unit
VCES Collector-Emitter Voltage 600 V
VGES Gate-Emitter Voltage 20 V
ICCollector Current @ TC = 25C60 A
Collector Current @ TC = 100C30 A
ICM (1) Pulsed Collector Current 90 A
IFSM Non-repetitive Peak Surge Current
60Hz Single Half-Sine Wave 150 A
PDMaximum Power Dissipation @ TC = 25C 480 W
Maximum Power Dissipation @ TC = 100C 192 W
TJ Operating Junction Temperature -55 to +150 C
Tstg Storage Temperature Range -55 to +150 C
TLMaximum Lead Temp. for soldering
Purposes, 1/8” from case for 5 seconds 300 C
Symbol Parameter Typ. Max. Unit
RJC(IGBT) Thermal Resistance, Junction-to-Case -- 0.26 C/W
RJC(Diode) Thermal Resistance, Junction-to-Case -- 0.92 C/W
RJA Thermal Resistance, Junction-to-Ambient -- 40 C/W
G
C
E
G
C
E
TO-247
GCE
©2007 Fairchild Semiconductor Corporation 2www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
Package Marking and Ordering Information
Electrical Characteristics of the IGBT TC = 25°C unless otherwise noted
Part Number Top Mark Package Packing Method Reel Size Tape Width Quantity
FGH30N60LSDTU FGH30N60LSD TO-247 Tube N/A N/A 30
Symbol Parameter Test Conditions Min. Typ. Max. Unit
Off Characteristics
BVCES Collector-Emitter Breakdown Voltage VGE = 0 V, IC = 250 uA 600 -- -- V
BVCES/
TJ
Temperature Coefficient of Breakdown
Voltage VGE = 0 V, IC = 250 uA -- 0.6 -- V/C
ICES Collector Cut-Off Current VCE = VCES, VGE = 0 V -- -- 250 uA
IGES G-E Leakage Current VGE = VGES, VCE = 0 V -- -- ±250 nA
On Characteristics
VGE(th) G-E Threshold Voltage IC = 250 uA, VCE = VGE 4.0 5.5 7.0 V
VCE(sat) Collector to Emitter
Saturation Voltage
IC = 30 A, VGE = 15 V -- 1.1 1.4 V
IC = 30 A, VGE = 15 V,
TC = 125C-- 1.0 -- V
IC = 60 A, VGE = 15 V -- 1.3 -- V
Dynamic Characteristics
Cies Input Capacitance VCE = 30 V, VGE = 0 V,
f = 1 MHz
-- 3550 -- pF
Coes Output Capacitance -- 245 -- pF
Cres Reverse Transfer Capacitance -- 90 -- pF
Switching Characteristics
td(on) Turn-On Delay Time
VCC = 400 V, IC = 30 A,
RG = 6.8 , VGE = 15 V,
Inductive Load, TC = 25C
-- 18 -- ns
trRise Time -- 46 -- ns
td(off) Turn-Off Delay Time -- 250 -- ns
tfFall Time -- 1.3 2.0 us
Eon Turn-On Switching Loss -- 1.1 -- mJ
Eoff Turn-Off Switching Loss -- 21 -- mJ
td(on) Turn-On Delay Time
VCC = 400 V, IC = 30 A,
RG =6.8 , VGE = 15 V,
Inductive Load, TC = 125C
-- 17 -- ns
trRise Time -- 45 -- ns
td(off) Turn-Off Delay Time -- 270 -- ns
tfFall Time -- 2.6 -- us
Eon Turn-On Switching Loss -- 1.1 -- mJ
Eoff Turn-Off Switching Loss -- 36 -- mJ
QgTotal Gate Charge VCE = 600 V, IC = 30 A,
VGE = 15 V
-- 225 -- nC
Qge Gate-Emitter Charge -- 30 -- nC
Qgc Gate-Collector Charge -- 105 -- nC
LeInternal Emitter Inductance Measured 5mm from PKG -- 7 -- nH
©2007 Fairchild Semiconductor Corporation 3www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
Electrical Characteristics of the Diode TC = 25°C unless otherwise noted
Parameter Conditions Min. Typ. Max Unit
VFM IF = 15 A
IF = 15 A TC = 25 C
TC = 125 C-
-1.8
1.6 2.2
-V
V
IRM VR = 600 V TC = 25 C - - 100 A
trr IF =1 A, diF/dt = 100 A/s, VR = 30 V
IF =15 A, diF/dt = 100 A/s, VR = 390 V TC = 25 C
TC = 25 C-
--
-35
40 ns
ns
ta
tb
Qrr
IF =15 A, diF/dt = 100 A/s, VR = 390 V TC = 25 C
TC = 25 C
TC = 25 C
-
-
-
18
13
27.5
-
-
-
ns
ns
nC
©2007 Fairchild Semiconductor Corporation 4www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
Typical Performance Characteristics
Figure 1.Typical Output Characteristics Fig ure 2. Ty pic al Satura tion Vo ltage
Characteristics
Figure 3. Typical Saturation Voltage Figure 4. Transfer characteristics
Characteritics
Figure 5. Saturation Voltage vs. Case Figure 6. Saturation Voltage vs. Vge
Temperature at Variant Current Level
01234
0
30
60
90 TC = 25oCVGE = 20V
1 5 V
1 2 V
1 0 V
8 V
Collector Current, IC [A]
Collector-Emitter Voltage, VCE [V]
01234
0
30
60
90 TC = 125oCVGE = 20V
15 V
12 V
10 V
8V
Collector Current, IC [A]
Collector-Emitter Voltage, VCE [V]
024681012
0
30
60
90 Common Emitter
VCE = 20V
TC = 25oC
TC = 125oC
Collector Current, IC [A]
Gate-Emitter Vo ltag e,V GE [V]
0123
0
30
60
90 Common Emitter
VGE = 15V
TC = 25oC
TC = 125oC
Collector Current, IC [A]
Colle cto r-E mitter Voltag e , VCE [V]
25 50 75 100 125
0.6
0.8
1.0
1.2
1.
60A
30A
IC = 15A
Com m on Em itter
VGE = 15V
Collector-Emitter Voltage, VCE [V]
Case Tem perature, TC [oC]
0 4 8 121620
0
4
8
12
16
20
IC = 1 5A
30A 60A
Comm on E m itter
TC = 25oC
Collector-Emitter Voltage, VCE [V]
Gate -E m itte r V olta g e, V GE [V]
©2007 Fairchild Semiconductor Corporation 5www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
Typical Performance Characteristics (Continued)
Figure 7. Saturation Voltage vs. Vge Figure 8. Capacitance characteristics
Figure 9. Gate Charge Characteristics Figure 10. SOA Characteeristics
Figure 11. Load Current Vs. Frequency Figure 12. Turn-On Characteristics vs.
Gate Resistance
0 4 8 12 16 20
0
4
8
12
16
20
IC = 15A
30A 60A
Comm on Emitter
TC = 125oC
Collector-Emitter Voltage, V CE [V]
Gate-Emitter Voltage, VGE [V]
0 5 10 15 20 25 30
100
1000
10000
13000
Comm on E m itter
VGE = 0V, f = 1MHz
TC = 25oC
Cres
Coes
Cies
Capacitance [pF]
Colle cto r-E mitter Volta g e, V CE [V ]
50
0 50 100 150 200 250
0
3
6
9
12
15 Comm on Em itter
IC = 30A
TC = 25oC
300V
200V
Vcc = 100V
Gate-Emitter Voltage, VGE [V]
Ga te Charg e , Q g [nC]
0.1 1 10 100 1000
0.1
1
10
100 50s
100s
DC Operation
1ms
Ic MAX (Continuous)
Ic MAX (Pulsed)
Single Nonrepetitive
Pulse TC = 25oC
Curves must be derated
linearly with increase
in temperature
Collector Current, Ic [A]
Collector-Emitter Voltage, VCE [V]
300
0 1020304050
10
100
Common Emitter
VCC = 400V, VGE = 15V
IC = 30A
TC = 25oC
TC = 125oC
td(on)
tr
Switching Time [ns]
Gate Resistance, RG []
200
0.1 1 10 100 1000
0
10
20
30
40
50
60
70
80 Vcc = 400V
load C urrent : peak of square wav e
Duty cy cle : 50%
Tc = 100oC
Pow e D issipation = 192W
Collector Cu rre n t , IC [A]
Frequency, f [kHz]
©2007 Fairchild Semiconductor Corporation 6www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
Typical Performance Characteristics (Continued)
Figure 13. Turn-Off Characteristics vs. Figure 14. Turn-On Characteristics vs.
Gate Resistance Collector Current
Figure 15. Turn-Off Charact eristics v s. Figure 16. Switchin g Los s vs
Collector Current Gate Resistance
Figure 17.Switching Loss vs Collec tor Current Figure 18. Turn-Off Switching
SOA Characteristics
0 1020304050
100
1000
Common Emitter
VCC = 400V, VGE = 15V
IC = 30A
TC = 25oC
TC = 125oC
td(off)
tf
Switching Time [ns]
Gate Resistance, RG []
3000
20 30 40 50 60 70 80
10
100
Comm on Em itter
VGE = 15V, RG = 6.8
TC = 25oC
TC = 125oC
tr
td(on)
Switching Time [ns]
Collector Current, IC [A ]
500
20 30 40 50 60 70 80
100
1000 Common Emitter
VGE = 15V, RG = 6.8
TC = 25oC
TC = 125oC
td(off)
tf
Switching Time [ns]
Collector Current, IC [A]
6000
5 101520253035404550
1
10
100
Comm on Emitter
VCC = 400V, VGE = 15V
IC = 30A
TC = 25oC
TC = 125oC
Eon
Eoff
Switching Loss [mJ]
Gate Resistance, RG []
500
10 20 30 40 50 60 70 80
0.1
1
10
100
Common Emitter
VGE = 15V, RG = 6.8
TC = 25oC
TC = 125oC
Eon
Eoff
Switching Loss [mJ]
Collector Current, IC [A]
1 10 100 1000
1
10
100
Safe Operating Area
VGE = 15V, TC = 125oC
Collector Curren t , I C [A]
Collecto r-Em itter Voltag e, VCE [V ]
200
©2007 Fairchild Semiconductor Corporation 7www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
Figure 19. Transient Thermal Impedance of IGBT
Figure 20. Forward Characteristics Figure 21. Reverse Current
Figure 22. Reverse Recovery Time
1E-5 1E-4 1E-3 0.01 0.1 1 10
1E-3
0.01
0.1
1
0.5
0.2
0.1
0.05
0.02
single pulse
Thermal Response [Zthjc]
Rectang u lar Pulse D u ration [s ec]
Dut y Fact o r , D = t1/t2
Peak Tj = Pdm x Zthjc + TC
0.01
t1
PDM
t2
0 100 200 300 400 500 600
1E-9
1E-8
1E-7
1E-6
1E-5
1E-4
TC = 25oC
TC = 75oC
REVERSE CURRENT, IR [A]
REVERSE VOLTAG E, VR [V]
TC = 125oC
0.00.40.81.21.62.02.42.83.2
0.1
1
10
100
TC=75oC
TC=25oC
FORWARD CU RRENT, IF [A]
FORW ARD VO LTAGE, VF [V ]
TC=125oC
100 200 300 400 500
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
TC = 125oC
TC = 75oC
REVERSE RECOV ERY TIME, trr [ns]
diF/d t [A / s]
TC = 25oC
IF = 15A
©2007 Fairchild Semiconductor Corporation 8www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
Mechanical Dimensions
Figure 23. TO-247 3L - TO-247,MOLDED,3 LEAD,JEDEC VARIATION AB
Package drawings are provided as a service to customers consider ing Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the draw ing and contact a Fairchild Semicond uctor r epresentative to ver ify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specif-
ically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/package/packageDetails.html?id=PN_TO247-003
©2007 Fairchild Semiconductor Corporation 9www.fairchildsemi.com
FGH30N60LSD Rev. C1
FGH30N60LSD — 600 V, 30 A PT IGBT
TRADEMARKS
The following includes re gistered and unregistere d trademarks and service marks, owned by Fairchild S emiconductor and/or its global subsidiar ies, and is not
intended to be an exhaustive list of all such trademarks.
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SY STEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used here in:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the bo dy or (b ) support or sustain life,
and (c) whose fail ure to perform when properly used in accordan ce with
instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to cause
the failure of the life support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
AccuPower™
AX-CAP®*
BitSiC™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT
CTL™
Current Transfer Logic™
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficentMax™
ESBC™
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FETBench™
FPS™
F-PFS™
FRFET®
Global Power ResourceSM
GreenBridge™
Green FPS™
Green FPS™ e-Series™
Gmax
GTO™
IntelliMAX™
ISOPLANAR
Marking Small Speaker s Sound L ouder
and Better™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MicroPak2™
MillerDrive™
MotionMax™
mWSaver®
OptoHiT™
OPTOLOGIC®
OPTOPLANAR®
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
Saving our world, 1mW/W/kW at a time™
SignalWise™
SmartMax™
SMART START™
Solutions for Your Success™
SPM®
STEALTH™
SuperFET®
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS®
SyncFET™
Sync-Lock™
®*
TinyBoost®
TinyBuck®
TinyCalc™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TranSiC™
TriFault Detect™
TRUECURRENT®*
SerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
VoltagePlus™
XS™
®
Datasheet Identifi cation Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications
may change in any manner without notice.
Preliminary First Production Datasheet contains preliminary data ; supplementary data will be published at a later
date. Fairchild Semiconduct or reserves the right to make changes at any time without
notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semicondu ctor reserves the right to
make changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild
Semiconductor. The datasheet is for reference information only.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website,
www.Fairchildsemi.com, under Sales Support .
Counterfeiting of se miconductor parts is a growing problem in th e industry. All ma nufactures of semiconductor p roducts are exper iencing counterfeiting of their
parts. Customers who inadver tently purcha se counterfeit part s exper ience many problems su ch as loss of brand repu tation , substa ndard perfo rmance, faile d
application, and increased cost of producti on and manuf act uring dela ys. Fairchil d is taking st rong measures to pro tect ourselves and our custo mers from the
proliferation of cou nterfeit parts. Fairchild str ongly encourages cust omers to purchase Fairchild parts either d irectly fr om Fairchild or from Authorized Fairchi ld
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild
Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of
up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and
warranty issues that may arise. Fairchild will not provide any warranty covera ge or other assistance for parts bought from Unau thorized Sources. Fairchild is
committed to combat this global prob lem and encourage our customers to do their part in stop ping this practice by buying direct or from authorized distribut ors.
Rev. I66
®
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC