SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N: CL05A225KP5NNNC Product : Multi-layer Ceramic Capacitor Description : CAP, 2.2, 10V, 10%, X5R, 0402 A. Samsung Part Number Series Size CL 05 A 225 K P 5 N N N C Samsung Multi-layer Ceramic Capacitor 0402 (inch code) Dielectric X5R Capacitance 2.2 10 % Capacitance L: 1.0 0.05 tolerance mm 0.5 0.05 mm W: Inner electrode Ni Termination Cu Plating Sn 100% Product Normal (Pb Free) Rated Voltage 10 V Special Reserved for future use Thickness 0.5 0.05 mm Packaging Cardboard Type,7"reel(10,000ea) B. Samsung Reliability Test and Judgement condition Judgement 0.50.1Vrms More than 100Mohm Rated Voltage 60~120 sec. Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Visual inspection 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characterisitcs Adhesive Strength (From -55 to 85, Capacitance change shoud be within 15%) No peeling shall be occur on the 500g*F, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. Resistance within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Judgement Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Moisture Capacitance change : Resistance Tan 0.2 max IR Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) within 12.5% With rated voltage 402, 90~95%RH, 500 +12/-0 hour : More than 12.5* High Temperature Capacitance change : Resistance Tan 0.2 max IR Test condition within 12.5% With 100% of the rated voltage Max. operating temperature : More than 25* 1000+48/-0 hour Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.