ALUMINUM ELECTROLYTIC CAPACITORS HD High Ripple Low Impedance Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C series Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2011/65/EU). HD Smaller HV Specifications Performance Characteristics ltem Category Temperature Range -40 to +105C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 22 to 6800F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 50 tan (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 Tangent of loss angle (tan ) 120Hz 20C For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 6.3 10 16 25 35 50 Z-25C / Z+20C 2 2 2 2 2 2 Z-40C / Z+20C 3 3 3 3 3 3 Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for D=5 and 6.3, 3000 hours for D=8, 4000 hours for D=10), at 105C, the peak voltage shall not exceed the rated voltage. Marking Printed with white color letter on black sleeve. Radial Lead Type Capacitance change tan Leakage current 120Hz Within 25% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 10V 3300F) 1 d Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U HD 1 A 3 3 2 M H D P0.5 D+0.5 MAX. Size code Configuration Capacitance tolerance (20%) Rated capacitance (3300F) Pressure relief vent (6.3up) Rated voltage (10V) L+ MAX. 15MIN Series name 4MIN Type Configuration (mm) (L < 20) 1.5 (L 20) 2.0 D 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 d 0.5 0.5 0.6 0.6 0.6 0.8 In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. D Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 8 * 10 12.5 *16 ED PD HD * Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS HD series Standard Ratings V (Code) Item Cap.(F) Code 6.3 (0J) Case size D x L (mm) 10 (1A) Impedance () MAX. 20C / 100kHz Rated ripple (mArms) - 10C / 100kHz 105C / 100kHz 100 101 150 151 220 221 330 331 470 471 560 561 680 681 820 821 8 x 15 0.056 0.17 995 1000 102 10 x 12.5 0.053 0.16 1030 8 x 20 0.041 0.13 1250 10 x 16 0.038 0.12 1430 5 x 11 0.30 1.0 250 6.3 x 11 0.13 0.41 405 0.072 0.22 760 8 x 11.5 Case size D x L (mm) Impedance () MAX. 20C / 100kHz Rated ripple (mArms) -10C / 100kHz 105C / 100kHz 5 x 11 0.30 1.0 250 6.3 x 11 0.13 0.41 405 8 x 11.5 0.072 0.22 760 8 x 15 0.056 0.17 995 10 x 12.5 0.053 0.16 1030 8 x 20 0.041 0.13 1250 10 x 16 0.038 0.12 1430 10 x 20 0.023 0.069 1820 1200 122 1500 152 10 x 20 0.023 0.069 1820 10 x 25 0.022 0.066 2150 2200 222 10 x 25 0.022 0.066 2150 12.5 x 20 0.021 0.053 2360 3300 332 12.5 x 20 0.021 0.053 2360 12.5 x 25 0.018 0.045 2770 12.5 x 31.5 0.016 0.041 3290 16 x 20 0.018 0.045 3140 12.5 x 35.5 0.015 0.039 3400 16 x 25 0.016 0.043 3460 3900 392 12.5 x 25 0.018 0.045 2770 4700 472 12.5 x 31.5 0.016 0.041 3290 12.5 x 35.5 0.015 0.039 3400 16 x 20 0.018 0.045 3140 16 x 25 0.016 0.043 3460 5600 562 6800 682 V (Code) Item Cap. (F) Code 47 470 56 560 100 101 120 121 220 221 330 331 470 471 680 681 16 (1C) Case size D x L (mm) 25 (1E) Impedance () MAX. 20C / 100kHz Rated ripple (mArms) - 10C / 100kHz 105C / 100kHz 5 x 11 0.30 1.0 250 6.3 x 11 0.13 0.41 405 8 x 11.5 0.072 0.22 760 0.30 1.0 250 6.3 x 11 0.13 0.41 405 8 x 11.5 0.072 0.22 760 8 x 15 0.056 0.17 995 10 x 12.5 0.053 0.16 1030 0.17 995 8 x 20 0.041 0.13 1250 0.053 0.16 1030 10 x 16 0.038 0.12 1430 8 x 20 0.041 0.13 1250 10 x 16 0.038 0.12 1430 10 x 20 0.023 0.069 1820 102 10 x 20 0.023 0.069 1820 1200 122 10 x 25 0.022 0.066 2150 1500 152 12.5 x 20 0.021 0.053 2360 222 5 x 11 0.056 821 2200 Rated ripple (mArms) -10C / 100kHz 105C / 100kHz 8 x 15 820 182 Impedance () MAX. 20C / 100kHz 10 x 12.5 1000 1800 Case size D x L (mm) 12.5 x 25 0.018 0.045 2770 12.5 x 31.5 0.016 0.041 3290 16 x 20 0.018 0.045 3140 2700 272 3300 332 12.5 x 35.5 0.015 0.039 3400 3900 392 16 x 25 0.016 0.043 3460 10 x 25 0.022 0.066 2150 12.5 x 20 0.021 0.053 2360 12.5 x 25 0.018 0.045 2770 12.5 x 31.5 0.016 0.041 3290 16 x 20 0.018 0.045 3140 12.5 x 35.5 0.015 0.039 3400 16 x 25 0.016 0.043 3460 : In this case, 6 will be put at 12th digit of type numbering system. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS HD series Standard Ratings V (Code) Item Cap.(F) Code 35 (1V) Case size D x L (mm) 50 (1H) Impedance () MAX. 20C / 100kHz Rated ripple (mArms) - 10C / 100kHz 105C / 100kHz 22 220 33 330 5 x 11 0.30 1.0 250 6.3 x 11 0.13 0.41 405 Case size D x L (mm) Impedance () MAX. 20C / 100kHz Rated ripple (mArms) -10C / 100kHz 105C / 100kHz 5 x 11 0.34 1.18 238 6.3 x 11 56 560 0.14 0.50 385 100 101 8 x 11.5 0.074 0.22 724 120 121 8 x 15 0.061 0.18 950 150 151 10 x 12.5 0.061 0.18 979 180 181 8 x 20 0.046 0.14 1190 220 221 10 x 16 0.042 0.12 1370 270 330 8 x 11.5 0.072 0.22 760 8 x 15 0.056 0.17 995 10 x 12.5 0.053 0.16 1030 271 8 x 20 0.041 0.13 1250 10 x 20 0.030 0.090 1580 331 10 x 16 0.038 0.12 1430 10 x 25 0.028 0.085 1870 470 471 10 x 20 0.023 0.069 1820 12.5 x 20 0.027 0.068 2050 560 561 10 x 25 0.022 0.066 2150 12.5 x 25 0.023 0.059 2410 680 681 12.5 x 20 0.021 0.053 2360 12.5 x 31.5 0.021 0.052 2860 12.5 x 35.5 0.019 0.051 2960 16 x 20 0.023 0.059 2730 16 x 25 0.021 0.056 3010 820 821 1000 102 12.5 x 25 0.018 0.045 2770 12.5 x 31.5 0.016 0.041 3290 1200 122 16 x 20 0.018 0.045 3140 1500 152 12.5 x 35.5 0.015 0.039 3400 1800 182 16 x 25 0.016 0.043 3460 : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more 22 to 33 0.45 0.55 0.75 0.90 1.00 47 to 330 0.60 0.70 0.85 0.95 1.00 470 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 6800 0.75 0.80 0.95 1.00 1.00 Cap. (F) CAT.8100D