MA4P7470F-1072T Rev. V2 Non Magnetic MELF PIN Diode Features * Non-Magnetic Package Suitable for MRI Applications * Rectangular MELF SMQ Ceramic Package * Hermetically Sealed * Low Rs for Low Insertion Loss * Long L for Low Intermodulation Distortion * Low Cj for High Series Isolation * High Average Incident Power Handling Capability * RoHS Compliant Description and Applications The MA4P7470F-1072T is a surface mountable PIN diode in a non-magnetic Metal Electrode Leadless Faced (MELF) package. The device incorporates M/A-COM Technology Solutions time proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. The package utilizes M/A-COM Technology Solutions new non-magnetic plating process to provide a hermetically sealed package with extremely low permeability. Incorporated within the package is a glass passivated PIN chip that is full face bonded on both the cathode and anode to maximize surface area for low electrical and thermal resistance. The low thermal resistance provides excellent performance at high incident power levels of up to 200 watts CW. The MA4P7470F-1072T has been comprehensively characterized both electrically and mechanically to ensure repeatable and predictable performance. The MA4P7470F-1072T is a non-magnetic device which has similar electrical performance to its magnetic counterpart the MA4P7417F-1072T. The diode is well suited for use in low loss, low distortion, high power switching circuits. It was designed to be used in a high magnetic field environment from HF through UHF frequencies. This device is designed to meet the most rigorous electrical and mechanical requirements of MRI environments. Designed for Automated Assembly MELF PIN diodes are designed for high volume tape and reel assembly. The rectangular package design is excellent for automatic pick and place assembly methods. The parallel flat surfaces are suitable for key jaw or vacuum pickup techniques. All solderable surfaces are tin plated and compatible with industry standard reflow and vapor phase soldering methods. Absolute Maximum Ratings1 @ +25C Parameter Absolute Maximum Operating Temperature -65C to +125C Storage Temperature -65C to +150C Chip Junction Temperature +175C Continuous Diode Mounting Temperature +265C for 10 seconds RF C.W. Incident Power +53dBm C.W. Forward D.C. Current +150 mA Reverse D.C. Voltage @ -10uA - 800V 1. Exceeding any of these limits may cause permanent damage. ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7470F-1072T Rev. V2 Non Magnetic MELF PIN Diode Electrical Specifications @ +25 C Parameter Symbol Condition Unit Value Maximum Forward Voltage VF IF = +100mA 1.0VDC 1 VR Ir = -10uA l - 800 l VDC Maximum Total Capacitance CT -100V @ 100MHz 0.7pF Maximum Series Resistance RS +100mA @ 100MHz 0.8 Minimum Parallel Resistance RP -10V @ 100MHz 50K Nominal Carrier Lifetime L +6mA / -10mA @ (50% - 90% Voltage) 6.5 s Nominal I-Region Length m - 140 m Maximum Thermal Resistance IH = 1A, IL = 10mA, T = 1mS 13C/W Maximum Power Dissipation in Free Air W IF = +100mA 4W Maximum Power Dissipation with heatsink PD IF = +100mA 12W Minimum Reverse Voltage Note: 1. The minimum specified VR (Reverse Voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10A Environmental Screening Capability MELF devices may be used in industrial or military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet. MIL-STD-750 Test Method Description High Temperature Storage 1031 +150C, for 340 Hours Temperature Shock 1051 -65C to +125C, 20 Cycles HTRB 1038 80% of rated VR, +150C, for 96 Hours Moisture Resistance 1021 No Initial Conditioning, 85 % RH, +85C Gross Leak 1071 Cond. E Dye Penetrant Visual Vibration Fatigue 2046 20,000 G's, 60 Hz, x, y, z axis Solderability 2026 Test Temperature = +245C ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7470F-1072T Rev. V2 Non Magnetic MELF PIN Diode Typical Electrical Performance MA4P7470F-1072T Rs vs I 1000 1 GHz Rs (Ohms) 100 100 MHz 10 1 0.1 0.01 0.10 1.00 10.00 100.00 I ( mA ) MA4P7470F-1072T Rp vs Voltage Rp ( Ohms ) 1.0E+ 05 Rp_ 1.5 GHz 1.0E+ 04 1.0E+ 03 1.00 10.00 100.00 V oltage ( V ) ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7470F-1072T Rev. V2 Non Magnetic MELF PIN Diode Typical Electrical Performance MA4P7470F-1072T Ct vs Voltage 1 Ct (pF) 1500 MHz 100 MHz 0.1 0.1 1.0 10.0 100.0 Voltage ( V ) MA4P7470F-1072T Ls vs Frequency 1 Ls (nH) Ls_50 mA 0.1 100.0 Frequency ( MHz ) ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. 1000.0 * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7470F-1072T Rev. V2 Non Magnetic MELF PIN Diode Typical Non-Magnetic Performance 2.50E-02 Comparison of Magnetic Moment vs H Field for MA4P7400-1072T Non-Magnetic Series & MA4P1250-1072T Magnetic Devices 2.00E-02 Device Magnetic Moment (EMU) 1.50E-02 MA4P1250-1072T Magnetic 1.00E-02 5.00E-03 0.00E+00 -5.00E-03 MA4P7400-1072T Non-Magnetic Series -1.00E-02 -1.50E-02 -2.00E-02 -2.50E-02 -1.0E+04 -8.0E+03 -6.0E+03 -4.0E+03 -2.0E+03 0.0E+00 2.0E+03 4.0E+03 6.0E+03 8.0E+03 1.0E+04 H Field ( Oersteads ) Table 1 - Typical Magnetic Properties of Non-Magnetic MA4P7470F-1072T Device vs. A Conventional Magnetic MA4P1250-1072T Device Magnetic Property MA4P7470F-1072T Value MA4P1250-1072T Value Saturation Moment (EMU) @ H = HMAX Oersteads 2.3 x E-4 2.1 x E-2 Remanance Moment (EMU) @ H = 0 Oersteads 4.2 x E-8 7.1 x E-3 Coercivity (Oersteads) @ EMU = 0 Moment 1 59.2 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7470F-1072T Rev. V2 Non Magnetic MELF PIN Diode 1072 Circuit Pad Layout 1072 Package Dimensions Dimension MIN. MAX. MIN. MAX. A 0.080 0.095 2.032 2.413 B 0.115 0.135 2.921 3.429 C 0.008 0.030 0.203 0.762 INCHES MM Package Style 1072 Dimension inches mm A 0.093 2.36 B 0.050 1.27 C 0.060 1.52 Cathode B A A A Solderable Surfaces C B C B Ordering Information Part Number Package MA4P7470F-1072T Tape and Reel ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.