1. SPECIFICATIONS OF IN SERIES Standard Products SC Designed for general use. Superior high frequency characteristics make capacitors in the SC Series suitable for use in noise limiters and switching power supplies. Sleeve color : Purple Marking : Polarity( ), Rated voltage, Capacitance (White) SANYO, OS-CON, Lot.No. Max. operating temp.(105C) Specifications 1. 2. 3. 4. 5. Series Items Operating temperature range Capacitance tolerance (120Hz) Tangent of loss angle(tan) (120Hz) Leakage current (A/2min.)(or less) *2 ESR (100k to 300kHz) Characteristics -55C to +105C M : 20% Value in Table 1 or less 6.3 to 25WV : 0.01CVor0.5 30WV : 0.02CV or 1.0 (whichever is the greater) Value in Table 1 or less 6. Temperature characteristics Impedance ratio at 100kHz., +20C -55C Z / Z20C 1.0 to 1.25 +105C Z / Z20C 0.75 to 1.0 Within 20% C/C 1.5 times of Item 3 or less tan Item 4 or less Leakage current Within 10% C/C 1.5 times of Item 3 or less tan Item 4 or less Leakage current Temporary:less than 20% of the rated voltage, Continuous:less than 10% of the rated voltage 7. High-temperature load 105C, 2,000Hrs. Rated voltage applied (25WV20V applied) *1 8. Moisture resistance (60C, 90 to 95%RH, 1,000Hrs. no voltage) 9. Reverse voltage guarantee *1 To use an OS-CON when the operating temperature exceeds 85C on a component with a rated voltage of 25V, reduce the voltage by 0.25V for every degree(1C) relative to the value at 85C(25V). *2 If any doubt arises, measure the current after applying voltage(voltage treatment) for 30 minutes at 105C. The rated voltage should be applied for 6.3 to 16 and 30WV, while a temperature reduction voltage should be applied for 25WV. Dimensions (unit : mm) Standards of lead position Sleeve d0.05 Size Code D+0.5max. F B B' 15min. L+1 max. 4min. DXL A F WV (SV) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 10 (11.5) A A B B C C D B C D D E F 4.0X6.8 5.0X6.8 6.3X6.8 6.3X9.8 8X10.5 10X10.5 F 2.00.5 2.00.5 2.50.5 2.50.5 3.50.5 5.00.5 0.45 0.45 0.45 0.60 0.60 0.60 G G(max.) 0.5 0.5 0.5 0.5 0.8 0.8 K(max.) 0.5 0.5 0.5 0.5 0.8 0.8 WV : Rated voltage (SV) : Surge voltage(room temperature) 6.3 (7.3) C d K mark ;ideal lead position C;the middle point of A-A' F B A' C 20min. Size List A 16 (18.4) A A A A B B C C D D 25 (25) A A B B C C C D E F F 30 (34.5) A B B C D D E F 16 1. SPECIFICATIONS OF IN SERIES Table 1 SC Series Characteristics List Size Code Part Number *1 *2 30SC1M A F *1 *2 *3 *4 Tangent of loss angle (max.) Leakage current (A) (max.)*4 1.0 350 430 0.03 1.00 1.0 350 430 0.03 0.50 25(16)SC1R5M 25(16) 1.5 300 435 0.03 0.50 16SC2R2M 16 2.2 280 450 0.04 0.50 16SC3R3M 16 3.3 280 500 0.04 0.53 10SC4R7M 10 4.7 280 540 0.05 0.50 6.8 250 560 0.05 0.50 6.3 30SC1R5M 30 1.5 300 435 0.03 1.00 30SC2R2M 30 2.2 250 695 0.03 1.32 25SC2R2M 25 2.2 200 695 0.03 0.55 25SC3R3M 25 3.3 200 700 0.03 0.83 16SC4R7M 16 4.7 180 720 0.04 0.75 16SC6R8M 16 6.8 150 745 0.04 1.09 10SC10M 10 10 150 780 0.05 1.00 6.3 10 150 780 0.05 0.63 6.3 15 120 815 0.05 0.95 30SC3R3M 30 3.3 200 820 0.03 1.98 25SC4R7M 25 4.7 100 1130 0.03 1.18 25SC6R8M 25 6.8 100 1140 0.03 1.70 25SC10M 25 10 90 1150 0.03 2.50 16SC10M 16 10 90 1150 0.04 1.60 16SC15M 16 15 90 1230 0.04 2.40 10SC22M 10 22 70 1270 0.05 2.20 6SC22M 6.3 22 70 1270 0.05 1.39 6SC33M 6.3 33 70 1320 0.05 2.08 4.7 120 1300 0.04 2.82 6.8 30SC4R7M 30 30SC6R8M 30 120 1340 0.04 4.08 25SC15M 25 15 70 1650 0.04 3.75 16SC22M 16 22 70 1800 0.05 3.52 16SC33M 16 33 70 1900 0.06 5.28 10SC47M 10 47 60 2020 0.06 4.70 47 60 2020 0.06 2.96 6SC47M E Maximum allowable ripple current (mArms)*3 30 6SC15M D ESR *3 (100kHz to 300kHz) (m) (max.) 25(16) 6SC10M C Nominal Capacitance (F) 25(16)SC1M 6SC6R8M B Rated Voltage (V) 6.3 30SC10M 30 10 110 1380 0.06 6.00 25SC22M 25 22 40 2330 0.06 5.50 25SC33M 25 33 35 2900 0.06 8.25 25SC47M 25 47 35 2980 0.06 11.75 30SC22M 30 22 80 1830 0.06 13.20 Capacitance tolerance : M ; 20%,Product "K" (capacitance tolerance : 10%) is optionally available. ( ) : 16SC1M etc. 100kHz, +45C After 2 minutes Temperature coefficient for ripple current Ambient Temp.(C) to +45 +65 +85 Coefficient 1.0 0.85 0.7 +95 0.4 +105 0.25 17