2 MMS / MMT / MMCX / MML series R209 / R210 / R110 / R302 Pages MMS/MMT Introduction .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 to 2-5 Characteristics .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 to 2-7 Plugs .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Cable assemblies .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Receptacles .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Accessories and adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 to 2-11 MMS/MMT/MMCX/MML CONTENTS Receptacle packaging .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Assembly instructions .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 MMCX Introduction .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Characteristics .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 Plugs .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 Receptacles .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 to 2-17 receptacle packaging and panel drilling .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18 Assembly instructions .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 MML Introduction .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 Characteristics .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 Receptacles .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 Pigtails. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 Cable assemblies .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 to 2-22 Adapters.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22 2-3 www.radiall.com MMS/MMT INTRODUCTION 50 MMS MMT DC - 6 GHz DC - 8 GHz 75 DC - 1 GHz GENERAL * Low profile coaxial connectors * Surface-mount receptacle (SMT) * Fully compatible with automated pick and place machines * Snap-on mating * High RF performance * 360 cable rotation APPLICATIONS * * * * * * * ireless base stations W Satellite reception terminals (GPS...) Instrumentation Wireless datacom networks Automated payment systems Videocommunications Other general electronics 2-4 www.radiall.com RADIALL has designed a complete range of microminiature coaxial connectors, dedicated to Surface Technology (SMT). Better than a simple SMT version of standard connector, MMS and MMT series were the first coaxial designed for SMT applications. Due to its optimized design, MMS and MMT range benefit from the following advantages: MMS/MMT INTRODUCTION * Design adapted to automatic placement The assymetric footprint of the MMS and MMT connectors allows video micro-positionning using the shadow to analyse its placement. MMS and MMT connectors stand on three pliable legs. This design guarantees the receptacle stability placement. It allows it to absorb by elastic bending of the legs, the pressure of the positioning mechanism. * A geometry suited to automated picking The plain upper surface of MMS and MMT receptacle facilitates vacuum picking of the component automated distribution system. The geometry allows the use of numerous pneumatic nozzles with various diameters. * Optimization of soldering procedure MMS and MMT connectors materials used resist, without damage, the rapid elevation of temperature during the short time of the solder reflow in an infra-red oven. * Packaging The MMS and MMT connectors are packaged on tape and reels containing either 100, 500 or 3 000 The unit cavity geometry is designed for a perfect presentation of the component. The bottom of the cavity This hole facilitates the suction of the component, avoiding the adherance effect and allows the use of for a push rod. * 360 cable rotation The MMS and MMT snap-on mating system ensures a correct positive connection each time and all connectors (plugs + receptacles) have a design which allows a 360 rotation of the pair when mated. * MMS vs MMT MMS and MMT connectors are dedicated to similar application. Nevertheless the choice between these to standard will be driven by the following characteristics: MMS MMT Comment Durability (mating cycle) 50 500 It is the main difference between these two series. MMS is dedicated to application wich requires only few mating/unmating cycles. MMT provide stronger retention force while allowing more manipulation. Frequency range 50 DC-6 GHz 75 DC-1 GHz 50 DC-8 GHz 75 DC-1 GHz Both series are fully optimized for either wireless phone frequency range or mobile computing such as bluetooth, Wifi and Wimax. Mated height 5.2 mm 6.8 mm 2-5 www.radiall.com MMS CHARACTERISTICS Test standard Values/remarks ELECTRICAL CHARACTERISTICS Impedance Frequency range Typical V.S.W.R. (mated pair) Insertion loss RF leakage (mated pair) Outer contact resistance Center contact resistance Insulation resistance Working voltage Testing voltage (V RMS) Maximum admissible power 50 DC - 6 GHz IEC 1169-1 75 DC - 1 GHz 1.05 at 1 GHz 1.15 at 2.5 GHz 1.35 at 6 GHz 0.2 dB at 2 GHz -50 dB at 500 MHz -45 dB at 1 GHz -40 dB at 2 GHz 5 M max 15 M max 500 M min (under 250 V RMS) 50 V RMS O 1 mm: 250 ; O 2 mm: 500 40 W at 1 GHz / 20C / V.S.W.R. = 1 IEC 1169-1 MIL STD 1344 method 3008 NF-C 93050 (I = 40 mA peak) NF-C 93050 (I = 40 mA peak) IEC 1169-1 IEC 1169-1 MECHANICAL CHARACTERISTICS Durability Force to engage Force to disengage Shocks (drop test) IEC 1169-1 IEC 1169-1 IEC 1169-1 IEC 68-2-27 Random vibrations General Motors spec. Bumps (mechanical shocks) Cable retention force Solderability 50 matings 7 N avg 5.5 N avg 50 g/11 ms ; 3 shocks/axis/way Sine waves 5 to 1000 Hz 3 to 30g - 1 H/axis 25 g/6 ms 1000 bumps/axis/way O 1 mm: 20 N ; O 2 mm: 35 N Passed IEC 68-2-29 IEC 1169-1 IEC 68-2-54 ENVIRONMENTAL CHARACTERISTICS Temperature range Climatic cycles -40C/+90C 48 H at 70C - 24 H at 40C/93% -36 H at -25C GAM T 13 MATERIALS Bodies plugs/in-series adapters Bodies receptacles Center contact male female Insulator Die cast zinc/brass Phosphor bronze Brass Beryllium copper PTFE PLATING Bodies plugs/in series adapters Bodies receptacles Center contact m ale female Nickel Gold Nickel Gold RF leakage and v.s.w.r 2-6 www.radiall.com Test standard MMT CHARACTERISTICS Values/remarks ELECTRICAL CHARACTERISTICS Impedance Frequency range Typical V.S.W.R. (mated pair) IEC 1169-1 Insertion loss RF leakage (mated pair) IEC 1169-1 IEC 1726 Outer contact resistance Center contact resistance Insulation resistance Working voltage Testing voltage Maximum admissible power 50 DC - 8 GHz 75 DC - 1 GHz 1.05 at 1 GHz 1.10 at 2.5 GHz 1.15 at 6 GHz 0.2 F (GHz) -42 dB at 500 MHz -38 dB at 1 GHz -30 dB at 3 GHz Initial: 2.5 m max Final: 12.5 m max Initial: 5 m max Final: 15 m max 5000 M under 500 Vcc 170 V eff. 500 V eff. 23 W at 1.8 GHz / 40C / V.S.W.R. = 1.1 IEC 1169-1 (I=40 mA eff.) IEC 1169-1 (I=40 mA eff.) IEC 1169-1 IEC 1169-1 MECHANICAL CHARACTERISTICS Durability Force to engage/disengage Shocks Vibrations Bumps Cable retention force Solderability IEC 1169-1 IEC 1169-1 IEC 68-2-27 IEC 68-2-6 IEC 68-2-29 IEC 1169-1 IEC 68-2-29 500 matings Ins 18 N Ext > 7 N passed passed passed O 2 mm: 20 N ; O 2.6 mm: 60 N Passed ENVIRONMENTAL CHARACTERISTICS Temperature range Damp heat Thermal shocks 55C / 100C Passed Passed IEC 68-23 IEC 68-2-14 / Test NA MATERIALS Plugs body/in-series adaptor Receptacles body Plugs center contact Receptacles center contact Insulators Brass CuSn9p Cube2 Brass PTFE PLATING Bodies plugs/in series adapters Bodies receptacles Plugs center contact Receptacles center contact Nickel/BBR Gold Gold Gold RF leakage and v.s.w.r 2-7 All dimensions are given in mm. www.radiall.com MMS/MMT PLUGS AND PIGTAILS STRAIGHT PLUGS CRIMP TYPE FOR FLEXIBLE CABLES Fig. 1 Series Cable group MMS MMT RG178/RG196 RG174/RG316 Cable group dia. 2/50/S 2.6/50/S Fig. 2 Part number Fig. Imp. () R209 080 000 R210 087 000 1 2 50 50 Dimensions (mm) Captive center contact A B C 0.60 1.80 2.25 yes yes Finish nickel nickel RIGHT ANGLE PLUGS CRIMP TYPE FOR FLEXIBLE CABLES Fig. 2 Fig. 1 Series MMS MMT Cable group RG178/RG196 RG178/RG196 RG174/RG316 Cable group dia. 1/50/S 2/50/S 2/50/S 2.6/50/S Part number Fig. Imp. () R209 351 020 R209 353 000 R210 160 020 R210 157 010 1 50 2 50 Dimensions A B 7.15 1.28 8.25 2 11 3.15 10 3.95 (mm) Captive center contact C 0.65 yes 1.1 8.5 yes 7.5 Finish nickel nickel PIGTAILS Fig. 1 Fig.2 Series MMS MMT 2-8 Cable group RG178/RG196 RG178/RG196 RG174/RG316 Cable group dia. 1/50/S 2/50/S 2/50/S 2.6/50/S Part number R285 001 001 R285 001 021 R284 008 001 R284 008 004 Fig. 1 2 Composition R209 351 020 + C291 050 066 R209 353 000 + C291 145 007 R210 160 020 + C291 145 007 R210 157 010 + C291 150 000 To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. Cable ASSEMBLIES Fig. 1 MMS/MMT CABLE ASSEMBLIES and RECEPTACLES Fig. 2 Series MMS MMT Cable group Cable group dia. Part number Fig. Composition 1/50/S R285 004 001 1 R209 351 020 + C291 050 066 + R209 351 020 RG178/RG196 2/50/S R285 004 221 1 R209 353 000 + C291 145 007 + R209 353 000 RG178/RG196 2/50/S R285 011 221 2 R210 160 020 + C291 145 007 + R210 160 020 Custom cable assemblies Contact us for all your cable assembly needs. SMT RECEPTACLES Fig. 1 Series Part number Fig. Imp. () Center contact finish Fig. 2 Finish MMS R209 408 052 1 R209 408 302 50 R210 408 012 MMT R210 408 052 R210 408 302 Packaging reel 100 pieces R209 408 012 2 gold gold Reel dia. Assembly instructions 180 reel 500 pieces 180 reel 3000 pieces 330 reel 100 pieces 180 reel 500 pieces 180 reel 3000 pieces 330 To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. M01 2-9 MMS/MMT TEST BOARD AND ADAPTERS BETWEEN SERIES ADAPTERS Fig. 1 Fig. 2 Series Part number Fig. Type Finish MMS R191 975 791 1 MMS female/SMA female passivated stainless steel MMT R191 394 027 2 MMT female/SMA female BBR TEST BOARDS Fig. 1 Fig. 2 Series Part number Fig. MMS R209 900 500 1 MMT R210 900 500 2 Connected to a network analyzer by 2 cable assemblies, this board allows to measure the V.S.W.R. of a complete link. IN SERIES ADAPTERS FOR PCB TO PCB LINK 3.3 Fig. 1 Series MMS MMT 2-10 Part number R209 307 000 R209 703 070 R210 703 507 Fig. 2 Fig. 1 2 3 Dimension A (mm) 4.9 8.01 Fig. 3 Finish Packaging nickel 100 pieces BBR 100 pieces To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. To ease PCB linking, this adapter is designed to remain mated to one designated PCB. Therefore, the slit interface is slide-on, the other is snap-on. This adapter can also be developed upon request with other lengths, in order to adjust space between PCB (minimum distance: 6.4 mm). Please consult us. MMS/MMT CABLE ASSEMBLIES AND TOOLING MEASUREMENT CABLE ASSEMBLIES Fig. 1 Series Cable group Cable group dia. Part number Fig. 2 Fig. Composition Length L (mm) MMS RG178/RG196 2/50/S R284 007 013 1 R209 080 500 + C291 145 007 + R124 069 120 150 MMT RD316 2.6/50/D R285 024 071 2 R210 158 010 + C291 185 067 + R124 072 220 200 (1) (1) Both cable assemblies are equiped with a straight MMS plug with a sliding interface to allow 500 matings and a SMA connector. EXTRACTION TOOL Materials and finish: black anodized aluminium The anodization allows the electric insulation and protects from the oxidization. Series Part number MMS R282 868 100 MMT R282 868 030 To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. 2-11 MMS/MMT RECEPTACLE PACKAGING ACCORDING TO IEC 286-3 STANDARD MATERIALS Reel: polyester Carrier tape: antistatic PETG (polyester) Cover tape: polyester Packaging 100 & 500 3000 Dia. A 180 330 PRECAUTION FOR USE Automated pick and place machines use standard tooling to peel the antistatic film off. Sometimes the "a" dimension of this tool is shorter than the overall "b" width between the two legs of the receptacle. There is thus a risk for the two legs being deformed while they pass through the tool during the suction operation. The user must then widen the "a" dimension of the peeling tool. 2-12 www.radiall.com M01 VIDEO SHADOW AND SOLDERING PATTERN OF THE RECEPTACLE MMS/MMT ASSEMBLY INSTRUCTIONS Coplanar circuit on PCB PCB material: glass epoxy composite (e r = 4.6) Ground and signal are on the same side. MMS PCB thickness (mm) 0.8 1.0 1.2 1.6 Coplanar line A (mm) 0.183 0.190 0.195 0.2 Pattern Land for solder paste MMT SUCTION PROCEDURE FOR RECEPTACLE MMS O OF NOZZLE > 1.2 mm Suction with the central contact hole. MMT O OF NOZZLE < 1.2 mm Suction with insulator. EXAMPLES OF PNEUMATIC NOZZLES 2-13 www.radiall.com MMCX introduction 50 DC - 6 GHz GENERAL * Subminiature coaxial connectors * Push-pull" snap-on mating * Complies with specification CECC 22000 APPLICATIONS * * * * Wireless LANs PCMCIA cards RF test ports Base stations MMCX series from Radiall combine intermatability with CECC 22000 compliant suppliers and high manufacturing quality. MMCX series is especially dedicated to wire to PCB connection where low space above the PCB is available (less than 2.1 mm) Due to Radiall manufacturing quality standard, our MMCX provide positive tactile feedback. MMCX series are adapted to high volume applications and Pick & Place manufacturing process. INTERFACE PLUG Letter 1 2 3 4 A B C D X1 2-14 min. 2.70 1.45 0 2.40 1.58 0.38 29 mm max. JACK min. .106 .057 0.25 3.15 1.62 0.42 0.20 31 inch max. .010 .124 .095 .062 .015 .064 .017 .008 Letter 1 2 3 4 5 6 A B C X1 X2 X3 www.radiall.com min. 2.60 0.90 1.40 1.57 2.30 2.41 2.88 3.00 68 28 13 mm max. 1.20 1.63 2.34 0.23 2.90 3.04 72 32 17 min. .102 .035 .055 .062 .091 .095 .113 .118 inch max. .047 .064 .092 .009 .114 .120 Test standard Values/remarks MMCX CHARACTERISTICS MMCX ELECTRICAL CHARACTERISTICS Impedance Frequency range V.S.W.R. CECC 22000 4.4.1 Dielectric withstanding voltage (at sea level) Insulation resistance CECC 22000 4.4.5 CECC 22000 4.4.4 50 DC - 6 GHz Edge card SMT: 1.40 max Cabled: 1.35 max 500 V RMS 50 Hz 1000 M min MECHANICAL CHARACTERISTICS Engagement force Disengagement force Contact captivation Durability (mating) CECC 22000 4.5.4 CECC 22000 4.5.4 CECC 22000 4.5.2 CECC 22000 4.7.1 3.5 lbs max 1.4 lbs to 3.4 lbs max 2.3 lbs min 500 cycles min ENVIRONMENTAL CHARACTERISTICS Temperature range Temperature shock Vibration -55C / +155C compliant compliant CECC 22000 4.6.7 CECC 22000 4.6.3 MATERIALS and PLATING Bodies Center contact ale m female Insulator Materials Brass Brass Beryllium copper PTFE PLatings Gold Gold These characteristics are typical and may not apply to all connectors. CHARACTERISTICS Eco MMCX ELECTRICAL AND MECHANICAL CHARACTERISTICS Impedance Frequency range Typical VSWR Temperature range Mating cycles 50 DC - 3 GHz 1.35 at 3 GHz - 40C / + 85C 100 mating cycles MATERIALS and PLATING Connector body Insulator Female center contact Outer contact Materials Brass PTFE / Polypropylene Beryllium copper Brass PLatings Gold Gold PACKAGING Packaging / MOQ (1) (1) 100 pieces bulk / MOQ 1000 pieces 500 pieces reel / MOQ 1000 pieces 1500 pieces reel / MOQ 1500 pieces Unit packaging / MOQ 100 pieces MOQ = Minimum Order Quantity 2-15 www.radiall.com MMCX PLUGS AND RECEPTACLES STRAIGHT PLUGS FULL CRIMP TYPE FOR FLEXIBLE CABLE R110 081 020 A 12.45 Dimensions (mm) B 2.55 C 0.97 R110 083 120 13.35 2.95 1.61 Cable group Cable group dia. Part number RG178/RG196 2/50/S RG174/RG176 2.6/50/S Packaging 100 RIGHT ANGLE PLUGS Fig. 1 Fig. 2 Fig. 4 Fig. 3 Cable group Cable group dia. Part number Fig. RG405 .085" RG178/RG196 2/50/S R110 153 000 R110 170 100 R110A 170 100 R110 172 100 R110A 172 100 1 2 3 2 4 RG174/RG316 2.6/50/S Dimensions (mm) A B 0.97 2.55 1.63 2.95 Packaging Note 100 ECO version ECO version PCB EDGE CARD RECEPTACLES Fig. 1 2-16 Fig. 2 Part number R110 422 100 Fig. 1 Gende Assembly instructions M04 R110 422 200 2 Jack M05 R110A 422 830 1 M04 Packaging 100 reel of 1500 pieces Note SMT SMT/offset ECO version To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. STRAIGHT PCB RECEPTACLES Fig. 1 Part number Fig. R110 426 000 1 R110A 426 000 1 R110 426 097 1 R110 427 820 2 R110 427 830 3 R110A 427 830 4 Fig. 2 Gender Panel drilling Fig. 3 Assembly instructions MMCX RECEPTACLES Fig. 4 Packaging Note 100 ECO version solder legs P01 Non magnetic Jack SMT M02 reel of 500 pieces ECO version RiGHT ANGLE FEMALE RECEPTACLE Part number Panel drilling Packaging R110 665 860 P02 500 To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. 2-17 MMCX RECEPTACLE PACKAGING ACCORDING TO IEC 286-3 STANDARD MATERIALS Reel: polyester Carrier tape: antistatic PETG (polyester) Cover tape: polyester A VIEW PRECAUTION FOR USE Automated pick and place machines use standard tooling to peel the antistatic film off. Sometimes the "a" dimension of this tool is shorter than the overall "b" width between the two legs of the receptacle. There is thus a risk for the two legs being deformed while they pass through the tool during the suction operation. The user must then widen the "a" dimension of the peeling tool. A VIEW Part number Part number Part number R110 422 200 R110 427 820 R110 422 100 R110 422 830 PANEL DRILLING P01 P02 mm inch max. min. max. min. A 0.85 0.75 .033 .030 B 2.56 2.52 .101 .099 2-18 www.radiall.com M02 SOLDERING PATTERN MMCX ASSEMBLY INSTRUCTIONS video shadows Part number R110 427 820 M03 video shadows SOLDERING PATTERN Part number R110 427 830 R110A 427 830 M04 SOLDERING PATTERN video shadows Part number R110 422 100 R110 422 830 M05 video shadows SOLDERING PATTERN Part number R110 422 200 2-19 www.radiall.com MML INTRODUCTION RADIALL has developed a new MML series to address the market demand for smaller microminiature coaxial connectors for applications such as cell relay, WiFi access points, GPS and other mobile terminals. There are three types of plugs with mated heights of, H2.5, H2.0 and H1.5, as well as two types of vertical PCB receptacles with good electrical performance up to 6 GHz. Features * T wo vertical PCB receptacles - MML H2.5 and MML H2.0 - MML H1.5 * Space saving - Three mated heights 2.5 mm, 2.0 mm, 1.5 mm - PCB patterns 3.08 mm x 3 mm for H2.5 and H2.0, 2 mm x 2 mm for H1.5 * DC - 6GHz, typical VSWR 1.35 max * Cable assemblies are offered with three high performance cables: 1.33 mm for MML H2.5, 1.13 mm for MML H2.0, 0.81 mm for MML H1.5 MML H1.5 series MML H2.0 series PCB H1 5 PCB receptaclelH1.5: R302 152 000 l H2 5&2 PCBPCB receptacle H2.5 and 2.0:0 R302 302 000 APPLICATIONS * Handhelds/GPS/WLAN * GSM/CDMA/WCDMA/TD-SCDMA cards CHARACTERISTICS Values/remarks ELECTRICAL CHARACTERISTICS Nominal impedance Frequency range Typical VSWR Contact resistance C enter contact Outer contact Insulation resistance Voltage ratingH2.5 and H2 H1.5 Withstanding voltage H2.5 and H2 H1.5 Mechanical durability Center contact axial force RoHS Temperature range Humidity Corrosion (salt spray) 50 DC - 6 GHz 1.35 max 25 M 15 M 500 M min 200 Vrms 150 Vrms 300 Vrms 200 Vrms 30 cycles 0.15 N Compliant -40 / +90C 96 hours at temperature of 40C and humidity of 95% 5% salt water solution, 48 hours MATERIALS and PLATING Connector bodies Female center contact Male center contact Materials Phosphor Bronze Phosphor Bronze Brass 2-20 www.radiall.com MML H2.5 series PLatings Gold Gold Gold MML RECEPTACLES, pigtails and cable assemblies SMT receptacles MML type Part number H2.5 & H2.0 H1.5 R302 302 000 R302 152 000 A 2.6 1.7 Dimensions B 2.6 1.7 (mm) C 1.3 0.85 D 0.6 0.3 Packaging 1000 piece/reel 2000 piece/reel MML pigtails Fig. 1 Fig. 2 Cable group dia. MML type Part number Fig. 1.33/50/S 1.13/50/S 0.81/50/S H2.5 H2.0 H1.5 R302 255 003 R302 205 001 R302 155 000 1 2 Dimensions (mm) A B 1.95 200 1.44 100 1.2 Packaging 100 MML to MML cable assemblies Cable group dia. MML type Part number 1.33/50/S 1.13/50/S 0.81/50/S H2.5 H2.0 H1.5 R302 000 000 R302 205 000 R302 155 001 Dimensions (mm) A B 1.95 100 1.44 1.2 Packaging 100 MML to sma plug cable assemblies Cable group dia. MML type Part number 1.33/50/S 1.13/50/S H2.5 H2.0 R302 255 002 R302 205 002 Dimensions (mm) A B 1.95 100 1.44 To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. Packaging 100 2-21 MML cable assemblies, adapters, tool and caBle characteristics MML to sma bulkhead jack cable assemblies Cable group dia. MML type Part number 1.33/50/S 1.33/50/S 1.13/50/S H2.5 H2.5 H2.0 R302 255 000 R302 255 001 R302 205 003 Dimensions (mm) A B 1.95 100 1.95 1.44 Packaging Note 100 Panel sealed SMA adapters Fig. 1 MML type H2.5 & H2.0 H1.5 Part number Fig R302 303 001 R302 303 000 R302 153 000 R302 153 001 1 2 1 2 Fig. 2 Dimensions (mm) A B C 17.2 2.9 2.6 13.2 1.05 1.98 17.2 2.9 2.1 12.9 0.78 1.4 Packaging Note unit MML plug - SMA plug MML jack - SMA plug MML plug - SMA plug MML jack - SMA plug extraction tools Part number R302 309 000 R302 159 000 To disconnect H2.5 & H2.0 H1.5 Packaging unit CABLE CHARACTERISTICS (typical) 2-22 Cable Dimension mm (inch) Cable Impedance () 1.33/50/S 50 7*.102 (7*.004) .305 (.012) SPC 1.13/50/S 50 7*.08 (7*.003) 0.81/50/S 50 7*.05 (7*.002) Core type Core Dia. Insulator Dia. Insertion Loss dB/m (dB/ft) Screen Outer 1 GHz 2 GHz 3 GHz 6 GHz .88 (.035) FEP 1.13 (.044) TPC 1.33 (.052) FEP 1.61 (0.49) 2.33 (0.71) 2.92 (0.89) 4.31 (1.31) .24 (.009) SPC .70 (.028) FEP .95 (.037) TPC 1.13 (.044) FEP 2.00 (0.61) 2.90 (0.88) 3.70 (1.13) 5.30 (1.62) .15 (.006) SPC .41 (.016) PFA .65 (.026) TPC .81 (.032) PFA 3.00 (0.91) 4.40 (1.34) 5.50 (1.68) 8.30 (2.53) SPC = Silver Plated Copper TPC = Tin Plated Copper FEP = Fluorinated Ethylene Propylene PFA = Perfluoroalkoxy To download data sheets and assembly instructions, visit www.radiall.com & enter the part number in the Search box. Bold part numbers represent products typically in stock & available for immediate shipment. See page 8 and 9 for packaging information. Company Profile AUTOMOTIVE AEROspace Cable designation Cable Group / Imp. Core type Cable dimensions mm (inch) Core Insulator Screen RG 174 A/U RG 178 B/U RG 178 B/U RG 178 non m. RG 179 B/U RG 187 A/U RG 188 A/U RG 196 A/U RG 212 /U RG 213 /U RG 214 /U RG 215 RG 216 /U RG 217 /U RG 218 /U RG 223 /U RG 225 /U RG 303 /U RG 316 /U RD 316 RG 393 RG 400 2.6 / 50 S 2 / 50 S 2 / 50 S 2 / 50 S 2.6 / 75 S 2.6 / 75 S 2.6 / 50 S 2 / 50 S 8 / 50 D 10 / 50 S 11 / 50 D 10 / 50 S 11 / 75 D 14 / 50 D 22 / 50 S 5 / 50 D 11 / 50 D 5 / 50 S 2.6 / 50 S 2.6 / 50 D 10 / 50 D 5 / 50 / D 50 50 50 50 75 75 50 50 50 50 50 50 75 50 50 50 50 50 50 50 50 50 7 x 0.16 7 x 0.1 7 x 0.1 7 x 0.1 7 x 0.1 7 x 0.1 7 x 0.17 7 x 0.1 solid 7 x 0.75 7 x 0.75 7 x 0.75 7 x 0.4 solid solid solid 7 x 0.8 solid 7 x 0.17 7 x 0.17 7 x 0.81 19 x 0.19 0.48 (.019) 0.30 (.012) 0.30 (.012) 0.29 (.011) 0.30 (.012) 0.30 (.012) 0.51 (.020) 0.30 (.012) 1.41 (.056) 2.26 (.089) 2.25 (.089) 2.25 (.089) 1.21 (.048) 2.69 (.106) 4.95 (.195) 0.89 (.035) 2.38 (.094) 0.94 (.037) 0.53 (.021) 0.53 (.021) 2.39 (.094) 0.98 (.039) RD 179 BT 3002 BT 2002 2.6 / 75 D 3.6 / 75 D 5 / 75 D 75 75 75 7 x 0.10 solid 7 x 0.20 0.30 (.012) 0.31 (.012) 0.60 (.024) 1.52 (.060) 0.84 (.033) 0.84 (.033) 0.84 (.033) 1.60 (.063) 1.60 (.063) 1.52 (.060) 0.86 (.034) 4.70 (.185) 7.24 (.285) 7.24 (.285) 7.25 (.285) 7.24 (.285) 9.40 (.370) 17.27 (.680) 2.95 (.116) 7.24 (.285) 2.95 (.116) 1.52 (.060) 1.52 (.060) 7.24 (.285) 2.95 (.116) S S S S S S S S D S D S D D S D D S S D D D Outer 2.79 (.110) 1.78 (.070) 1.83 (.072) 1.80 (.071) 2.54 (.010) 2.79 (.110) 2.79 (.110) 2.03 (.080) 8.43 (.331) 10.30 (.406) 10.80 (.425) 10.29 (.405) 10.80 (.425) 13.84 (.545) 22.10 (.870) 5.38 (.212) 10.90 (.429) 4.32 (.170) 2.49 (.098) 2.80 (.110) 9.91 (.390) 4.95 (.195) DEFENSE INDUSTRIAL INSTRUMENTATION MEDICAL SPACE TELECOM Radiall cable if applicable P/N Remark C291 150 000 C291 145 007 C291 145 060 C291 140 087 C291 210 007 C291 211 006 C291 160 006 C291 110 006 na C291 510 000 C291 600 000 na C291 610 000 C291 620 000 C291 630 000 C291 330 000 C291 605 007 na C291 170 007 C291 185 067 C291 511 007 C291 324 007 PVC jacket FEP jacket PVC jacket non magnetic / FEP jacket FEP jacket PTFE jacket PTFE jacket PTFE jacket C291 230 080 C291 246 046 C291 333 080 LSOH jacket FEP jacket FEP jacket s.a. PointVirgule +33 3 44 23 48 48 2011 Simply Your Best Connection . Technical information and sales contacts are available at : www.radiall.com The Best End-to-End Interconnect Solutions PVC jacket PVC jacket PVC jacket PVC jacket PVC jacket PVC jacket glass fiber jacket We offer an extensive range of solutions that supports the most demanding signal transmission applications. 4G wireless infrastructure, active array radars, IED's detection, electrical wiring in aircrafts, soldier tactical radios, in-vehicle communications networks, and magnetic resonance imaging systems are just a few of the complex applications that we support. * RF coaxial connectors * Multipin rectangular connectors * Fiber optic connectors and transceivers * Rack and panel connectors * Coaxial and fiber optic cable assemblies and harnesses * Antennas for tactical networks, aerospace * High frequency microwave components and instrumentation * Coaxial switches, including the smallest and most reliable SPDT relay . FEP jacket FEP jacket FEP jacket FEP jacket Flexible cable BT approved D D D 3.07 (.121) 3.55 (.140) 5.1 (.200) India - Radiall India Pvt. Ltd. Semi rigid cables MIL-C-17 standard RG 401 /U RG 401 alu RG 402 /U RG 402 tin RG 402 silver RG 402 alu RG 402 non m. RG 405 /U RG 405 tin RG 405 alu RG 405 non m. .047" .047" tin .250" .250" .141" .141" .141" .141" .141" .085" .085" .085" .085" .047" .047" 50 50 50 50 50 50 50 50 50 50 50 50 50 solid solid solid solid solid solid solid solid solid solid solid solid solid 1.63 (.064) 1.63 (.064) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.51 (.020) 0.51 (.020) 0.51 (.020) 0.51 (.020) 0.29 (.011) 0.29 (.011) Hand-formable Hand-formable Hand-formable Hand-formable .085" .141" .141" .141" 50 50 50 50 solid solid solid solid 0.51 (.020) 0.92 (.036) 0.92 (.036) 0.92 (.036) 5.31 (.209) 5.31 (.209) 2.98 (.117) 2.98 (.117) 2.98 (.117) 2.98 (.117) 2.98 (.117) 1.68 (.066) 1.68 (.066) 1.68 (.066) 1.68 (.066) 0.94 (.037) 0.94 (.037) -------------- 6.35 (.250) 6.35 (.250) 3.58 (.141) 3.58 (.141) 3.58 (.141) 3.58 (.141) 3.58 (.141) 2.20 (.087) 2.20 (.087) 2.20 (.087) 2.20 (.087) 1.19 (.047) 1.19 (.047) C291 870 001 copper tubing C291 874 187 tinned alu tubing C291 860 001 copper tubing C291 862 005 tinned copper tubing C291 861 066 silvered copper tubing C291 864 187 tinned alu tubing C291 861 061 non magnetic / copper tubing C291 850 001 copper tubing C291 850 005 tinned copper tubing C291 844 187 tinned alu tubing C291 851 001 non magnetic / copper tubing C291 855 001 copper tubing C291 855 065 tinned copper tubing 2.21 (.087) 3.50 (.138) 4.05 (.159) 4.50 (.177) C291 844 065 C291 864 065 C291 866 378 C291 866 270 . Best Value-added Services D1C004XE - 2010 November Edition 1.6 (.063) 1.95 (.077) 2.5 (.098) * Collaboration: We work closely with your engineers to understand your business, your technical needs, and your budgetary issues; * Wide Product Range: We manage our product lines thru the entire lifecycle in order to offer you a wide selection of standard products at an affordable cost; * Custom Products: We can tailor products to specific equipment and application needs; * Global Presence: We're everywhere you need us, with worldwide sales, engineering support, R&D in North America, Europe, and Asia, and manufacturing facilities strategically located in the United States, Mexico, France, India, and China; * Responsive Support and Service: From the design stage, planning to post-installation support, we're with you at every step, whether you need sales support or engineering expertise; * On-time Delivery: We support your logistical needs so you get the products when and where you need them; * Warranty: We proudly stand behind our products. Hand-formable cable 1.63 (.064) 2.95 (.116) 2.98 (.117) 2.98 (.117) ----- tin soaked braid tin soaked braid FEP jacket LSZH jacket Certifications and Environmental Corrugated cables (with helical or ringed/annular copper tube) Flexible Flexible Flexible Flexible Flexible Super flexible Super flexible Super flexible Super flexible 1/4" 1/2" 7/8" 1 1/4" 1 5/8" 1/4" 3/8" 1/2" 7/8" 50 50 50 50 50 50 50 50 50 Note: S = single braid. D = dual braid. solid solid solid solid solid solid solid solid tube 2.38 (.094) 4.80 (.189) 9.13 (.359) 12.7 (.500) 17.3 (.681) 1.90 (.075) 2.60 (.102) 3.60 (.142) 9.04 (.356) 6.40 (.252) 11.6 (.457) 22.5 (.866) 32.5 (1.28) 43.5 (1.71) 4.70 (.185) 6.30 (.248) 8.70 (.343) 23.62 (.930) ---------- 8.70 (.343) 16.35 (.644) 27.7 (1.091) 39.5 (1.55) 50.5 (1.99) 7.40 (.291) 10.8 (.425) 13.2 (.520) 27.48 (1.082) na C291 972 085 na na na C291 993 080 C291 996 070 C291 994 080 C291 996 580 Coaxial, rf & microwave ringed/annular tube ringed/annular tube ringed/annular tube ringed/annular tube ringed/annular tube helical tube helical tube helical tube helical tube Full Line Catalog Radiall is ISO 9001: 2008 certified and dedicated to continuous improvement programs that have resulted in also being AS9100, TS16949 and ISO 14001 certified. In addition, Radiall is committed to investing in its people, future technologies and the environment, such as being RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemical substances) compliant. For more information about cables manufactured by Radiall, please consult our online catalog. www.radiall.com Radiall is a global leader in the design, development and manufacturing of leading edge interconnect solutions. Dedicated to understanding its customers' needs since 1952, Radiall has earned the reputation of being "the best of the best" in engineering ingenuity by providing a constant flow of creative system solutions serving the telecommunications, aerospace, defense, instrumentation, automotive, industrial, medical and broadcast markets. www.radiall.com Coaxial, rf & microwave www.radiall.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Radiall: R209408012W R285001021 R302205002 100 R302205002 150 R302205002 200 R302205002 250 R302205002 300 R302205003 R302255003 R302155000 R302255002 R302000000 R302255001 R302205001 R302255000 R302205002 R302153001 R302303001 R302303000 R302153000