General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 n1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact coil-contact, reinforced insulation nAmbient temperature 85C n5kV/10mm Typical applications Boiler control, timers, garage door control, POS automation, interface modules Zb Approvals VDE Cert. No. 40007571, cULus E214025, cCSAus 1142018; CQC in preparation Technical data of approved types on request Contact Data 12A 16A Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 12A 16A Limiting continuous current 12A 16A, UL: 20A Limiting making current max. 4s, duty factor 10% 25A 30A Breaking capacity max. 3000VA 4000VA Contact material AgNi 90/10 Frequency of operation, with/without load DC coil 360/72000h-1 Operate/release time max., DC coil 8/6ms Bounce time max., DC coil, form A/form B 4/6ms Contact ratings Type Contact Load Cycles IEC 61810 RT314 DC-coil A (NO) 16A, 250VAC, cos=1, 85C 30x103 RT314 DC-coil C (CO) 16A, 250VAC, cos=1, 85C 10x103 RT314 DC-coil A (NO) 10A, 400VAC, cos=1, 85C 150x103 RT114 DC-coil A (NO) 12A, 250VAC, cos=1, 85C 50x103 RT114 AC-coil A (NO) 12A, 250VAC, cos=1, 70C 100x103 UL 508 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85C 6x103 RT334 A (NO) 16A, 250VAC, gen. purpose, 85C 50x103 RT314 A (NO) 1hp, 240VAC, 40C 1x103 RT314 A (NO) FLA/LRA, 4.5/13.1A, 480VAC, 70C 100x103 RT314, RTD14 A (NO) 1/2 HP@120VAC, 40C 1x103 RT314, RTD14 A (NO) 60LRA/10 FLA@240VAC, 40C 6x103 RT314, RTD14 A (NO) A300 Pilot Duty, 40C 6x103 RT314, RTD14 B (CO) B300 Pilot Duty, 40C 6x103 07-2020, Rev. 0720 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Contact Data (continued) EN60947-5-1 RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 EN60730-1 RT314 DC-coil A (NO) 12(2)A, 250VAC, 85C 100x103 Mechanical endurance DC coil >30x106 operations 1) For reflow solderable versions: actual contact performance may be influenced by the reflow soldering process. Coil Data Coil voltage range, DC coil Operative range, IEC 61810 Coil insulation system according UL 5 to 110VDC 2 class F Coil versions, DC coil Coil Rated Operate Release Coil Rated coil codevoltagevoltagevoltage resistancepower VDCVDCVDC 10%2)mW 0055 3.50.562403 0066 4.20.690400 009 9 6.3 0.9200400 01212 8.4 1.2360400 0181812.6 1.8770420 024 24 16.8 2.41440400 048 48 33.6 4.85520417 11011077.011.0 288002)420 2) Coil resistance 12%. All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 (Continued) Insulation Data Other Data (continued) Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 1000Vrms 5000Vrms 10/10mm IIIa PTI 250V Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature DC coil -40 to 85C Category of environmental protection, IEC 61810 standard versionRTII - flux proof, RTIII - wash tight Vibration resistance (functional) form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g Terminal type standard version PCB-THT, plug-in Weight14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270C/10s RTIII 260C/5s Packaging/unit tube/20 pcs., box/500 pcs. Accessories For details see datasheet Accessories Industrial Power Relay RT NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. PCB layout / terminal assignment Bottom view on solder pins *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54mm can be used. 12A, pinning 3.5mm S0418-CB 1 form C (CO) contact S0418-CN 1 form C (CO) contact S0163-BG 1 form A (NO) contact 07-2020, Rev. 0720 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company S0418-CA 1 form C (CO) contact S0163-BC 1 form A (NO) contact S0163-BH 2 16A, pinning 5mm 12A, pinning 5mm Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. S0163-BE 1 form A (NO) contact S0163-BD Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions S0163-BF Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 (Continued) Dimensions THT version S0272-BB Product code structure Typical product code Type RT Power PCB Relay RT1 Version 1 12A, pinning 3.5mm, flux proof 2 12A, pinning 5mm, flux proof *) 3 16A, pinning 5mm, flux proof B 12A, pinning 3.5mm, wash tight D 16A, pinning 5mm, wash tight Contact arrangement 1 1 form C (CO) contact 3 1 form A (NO) contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version F Standard version RT314 024 *) Wash tight version on request Product code RT114012F RT114024F RT134012F RT134024F RT314005F RT314012F RT314024F RT334012F RT334024F RTB14005F RTB14012F RTB14024F RTB34012F RTD14005F RTD14012F RTD14024F RTD34012F RTD34024F Version 12A, pinning 3.5mm, flux proof Contacts 16A, pinning 5mm, flux proof 1 form C (CO) contact 1 form A (NO) contact 1 form C (CO) contact 12A, pinning 3.5mm, wash tight 1 form A (NO) contact 1 form C (CO) contact 16A, pinning 5mm, wash tight 1 form A (NO) 1 form C (CO) contact Contact material AgNi 90/10 1 form A (NO) contact Coil 12VDC 24VDC 12VDC 24VDC 5VDC 12VDC 24VDC 12VDC 24VDC 5VDC 12VDC 24VDC 12VDC 5VDC 12VDC 24VDC 12VDC 24VDC Part number 1419108-2 1419108-3 5-1415020-1 2-1393242-1 1419108-8 2-1393237-2 2-1393237-3 2-1393237-5 2-1393237-7 2-1419108-4 2-1419108-5 2-1419108-6 2-1419108-7 2-1419108-8 2-1419108-9 3-1419108-1 3-1419108-6 3-1419108-9 This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 07-2020, Rev. 0720 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3