Not for new design
© 2006 IXYS All rights reserved 1 - 2
IXYS reserves the right to change limits, test conditions and dimensions.
VDI 100-06P1 VII 100-06P1
VID 100-06P1 VIO 100-06P1
0650
B3
IC25 =93A
VCES = 600 V
VCE(sat) typ. = 2.4 V
IGBTs
Symbol Conditions Maximum Ratings
VCES TVJ = 25°C to 150°C 600 V
VGES ± 20 V
IC25 TC = 25°C 93 A
IC80 TC = 80°C 63 A
ICM VGE = ±15 V; RG = 15 Ω; TVJ = 125°C 150 A
VCEK RBSOA, Clamped inductive load; L = 100 µH VCES
tSC VCE = VCES; VGE = ±15 V; RG = 15 Ω; TVJ = 125°C 10 µs
(SCSOA) non-repetitive
Ptot TC = 25°C 294 W
Symbol Conditions Characteristic Values
(TVJ = 25°C, unless otherwise specified)
min. typ. max.
VCE(sat) IC = 100 A; VGE = 15 V; TVJ = 25°C 2.4 2.8 V
TVJ = 125°C 2.8 V
VGE(th) IC = 1.5 mA; VGE = VCE 4.5 6.5 V
ICES VCE = VCES;V
GE = 0 V; TVJ = 25°C 1.4 mA
TVJ = 125°C 6.5 mA
IGES VCE = 0 V; VGE = ± 20 V 150 nA
td(on) 150 ns
tr60 ns
td(off) 450 ns
tf40 ns
Eon 3.2 mJ
Eoff 2.2 mJ
Cies VCE = 25 V; VGE = 0 V; f = 1 MHz 4.2 nF
RthJC (per IGBT) 0.43 K/W
RthJH with heatsink compound (0.42 K/m.K; 50 µm) 0.85 K/W
Inductive load, TVJ = 125°C
VCE = 300 V; IC = 60 A
VGE = 15/0 V; RG = 15 Ω
IGBT Modules in ECO-PAC 2
Short Circuit SOA Capability
Square RBSOA
Preliminary data sheet
Features
• NPT IGBT's
- positive temperature coefficient of
saturation voltage
- fast switching
• FRED diodes
- fast reverse recovery
- low forward voltage
• Industry Standard Package
- solderable pins for PCB mounting
- isolated DCB ceramic base plate
Advantages
• space and weight savings
• reduced protection circuits
• leads with expansion bend for stress relief
Typical Applications
• AC and DC motor control
• AC servo and robot drives
• power supplies
• welding inverters
Pin arangement see outlines
VII
OP9
GH10
VX18
L9
E2
K10
X16
X13
X15
NTC
VDI
X15
X16
NTC
AC1PS18IK10
L9
T16
VID
IK10SV18AC1
L9
F1
X15
X16
NTC
VIO
IJK 10LMN 9
A1
S18
Recommended replacement:
Please contact your local
sales office
Not for new design
© 2006 IXYS All rights reserved 2 - 2
IXYS reserves the right to change limits, test conditions and dimensions.
VDI 100-06P1 VII 100-06P1
VID 100-06P1 VIO 100-06P1
0650
B3
Reverse diodes (FRED)
Symbol Conditions Maximum Ratings
IF25 TC = 25°C 134 A
IF80 TC = 80°C 82 A
Symbol Conditions Characteristic Values
min. typ. max.
VFIF = 60 A; TVJ = 25°C 1.78 1.99 V
TVJ = 125°C 1.33 V
IRM IF = 60 A; diF/dt = 500 A/µs; TVJ = 125°C 28 A
trr VR = 300 V; VGE = 0 V 100 ns
RthJC 0.66 K/W
RthJH with heatsink compound (0.42 K/m.K; 50 µm) 1.32 K/W
Module
Symbol Conditions Maximum Ratings
TVJ -40...+150 °C
Tstg -40...+150 °C
VISOL IISOL ≤ 1 mA; 50/60 Hz 3000 V~
Mdmounting torque (M4) 1.5 - 2.0 Nm
14 - 18 lb.in.
aMax. allowable acceleration 50 m/s2
Symbol Conditions Characteristic Values
min. typ. max.
dSCreepage distance on surface (Pin to heatsink) 11.2 mm
dAStrike distance in air (Pin to heatsink) 11.2 mm
Weight 24 g
VII
VID
Data according to IEC 60747 and refer to a single transistor or diode unless otherwise stated.
Temperature Sensor NTC
Symbol Conditions Characteristic Values
min. typ. max.
R25 T = 25°C 4.75 5.0 5.25 kΩ
B25/50 3375 K
VDI
VIO
