Page <1> V1.111/09/19
SMD Rectifier Diodes
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro
Features:
• Plastic package has UL Flammability Classication 94V-0
• Construction utilizes void-free molded plastic technique
• For surface mounted applications
• High temperature : 250°C/10 seconds at terminals.
Mechanical Data:
Case : JEDEC Mini MELF(DO-213AA) molded plastic body
Terminals : Solder plated, solderable per MIL-STD-750, method 2026
Polarity : Colour band denotes cathode end
Mounting Position : Any
Weight : 0.0005 ounce, 0.015 gram
Reverse Voltage : 50 to 1000 Volts
Forward Current : 1 Ampere
Characteristics Symbol LL4001G+ LL4002G+ LL4004G+ LL4007G+ Unit
Max. Recurrent Peak Reverse Voltage Vrrm 50 100 400 1000
VMax. RMS Voltage Vrms 35 70 280 700
Max. DC Blocking Voltage Vdc 50 100 400 1000
Max. Average Forward
Rectied Current 0.375" (9.5mm) lead length at Ta = 75°C I(AV) 1
A
Peak Forward Surge Current
8.3ms Single Half Sine-Wave Ta = 75°C Ifsm 25
Max. Instantaneous Forward Voltage at 1A Vf1.1 V
Max. DC Reverse Current at Ta = 25°C
at Rated DC Blocking Voltage at Ta = 125°C Ir5
100 μA
Typical Junction Capacitance (Note 1) Cj15 pF
Typical Thermal Resistance (Note 2)
(Note 3)
RθJA
RθJL
75
30 °C/W
Operating Temperature Range Tj-65 to +175 °C
Storage Temperature Range Tstg -65 to +175 °C
Notes:
1. Measured at 1MHz and applied reverse voltage of 4 Volts
2. Thermal resistance from junction to ambient, 0.24″×0.24″ (6mm×6mm) copper pads to each terminal
3. Thermal resistance from junction to terminal, 0.24″×0.24″ (6mm×6mm) copper pads to each terminal
4. The typical data above is for reference only
Maximum Ratings and Electrical Characteristics:
Rating at 25°C ambient temperature unless otherwise specied.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Page <2> V1.111/09/19
SMD Rectifier Diodes
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro
Ratings and Characteristic Curves
FIG.1 – Forward Current Derating
FIG.3 – Maximum Non-Repetitive Peak
forward Surge Current
FIG.5 – Typical Junction
FIG.4 – Typical Reverse Characteristics
FIG.2 – Typical Instantaneous Forward
characteristics
Page <3> V1.111/09/19
SMD Rectifier Diodes
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro
MiniMELF (Do-213AA)
Dimensions : Inches (Millimetres)
Part Number Table
Description Part Number
Rectier Diode, Single, 50V, 1A, 1.1V, MiniMELF (DO-213AA) LL4001G+
Rectier Diode, Single, 100V, 1A, 1.1V, MiniMELF (DO-213AA) LL4002G+
Rectier Diode, Single, 400V, 1A, 1.1V, MiniMELF (DO-213AA) LL4004G+
Rectier Diode, Single, 1kV, 1A, 1.1V, MiniMELF (DO-213AA) LL4007G+
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for
the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,
any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make
any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or
where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its
negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.
