GBJ25005 - GBJ2510
Document number: DS21221 Rev. 8 - 2 1 of 4
www.diodes.com October 2009
© Diodes Incorporated
GBJ25005 - GBJ2510
25A GLASS PASSIVATED BRIDGE RECTIFIER
Features
• Glass Passivated Die Construction
• High Case Dielectric Strength of 2500VRMS
• Low Reverse Leakage Current
• Surge Overload Rating to 350A Peak
• Ideal for Printed Circuit Board Applications
• UL Listed Under Recognized Component
Index, File Number E94661
• Lead Free Finish/RoHS Compliant (Note 4)
Mechanical Data
• Case: GBJ
• Case Material: Molded Plastic. UL Flammability Classification
94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Plated Leads, Solderable per MIL-STD-202, Method
208
• Lead Free Plating (Tin Finish).
• Polarity: Molded on Body
• Mounting: Through Hole for #6 Screw
• Mounting Torque: 5.0 in-lbs Maximum
• Marking: Type Number
• Weight: 6.6 grams (approximate)
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol GBJ
25005 GBJ
2501 GBJ
2502 GBJ
2504 GBJ
2506 GBJ
2508 GBJ
2510 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR
(
RMS
)
35 70 140 280 420 560 700 V
Average Forward Rectified Output Current
(Note 1) @ TC = 100°C IO 25 A
Non-Repetitive Peak Forward Surge Current 8.3 ms
Single Half Sine-Wave Superimposed on rated Load IFSM 350 A
Thermal Characteristics
Characteristic Symbol Value Unit
Typical Thermal Resistance Junction to Case (Note 3) R
θ
JC 0.6 °C/W
Operating and Storage Temperature Range TJ, TSTG -65 to +150 °C
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic Symbol Value Unit
Forward Voltage (per element) @ IF = 12.5A VFM 1.05 V
Peak Reverse Current @ TC = 25°C
at Rated DC Blocking Voltage @ TC = 125°C IR 10
500 µA
I
2
t Rating for Fusing (t < 8.3ms) (Note 1) I
2
t 510 A
2
s
Typical Total Capacitance (per element) (Note 2) CT 85 pF
Notes: 1. Non-repetitive, for t > 1ms and < 8.3 ms.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
3. Thermal resistance from junction to case per element. Unit mounted on 220 x 220 x 1.6mm aluminum plate heat sink.
4. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
GBJ25005 - GBJ2510
Document number: DS21221 Rev. 8 - 2 2 of 4
www.diodes.com October 2009
© Diodes Incorporated
GBJ25005 - GBJ2510
0
5
10
15
20
25
30
25 50 75 100 125 150
I, AVE
R
A
G
E
R
E
C
T
I
F
IED
C
U
R
R
E
N
T
(A)
O
T , CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
C
Resistive or
Inductive load
with heatsink
without heatsink
0.01
0.1
1.0
10
00.8
1.6
I , INS
T
AN
T
ANE
O
U
S
F
O
R
WA
R
D
C
U
R
R
EN
T
(A )
F
2.0
100
T = 25°C
j
1.2
V , INSTANTANEOUS FORW ARD VOLTAGE (V)
Fig. 2 Typi cal Fo r ward Cha r acteristic s (p er el em ent )
F
0.4
110 100
I,
P
EAK
F
O
R
WA
R
D S
U
R
G
E
C
U
R
R
EN
T
(A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Maximum Non-Repetitive Surge Current
T = 25°C
j
Single half-sine-w ave
0
100
200
300
400
1
100
1,000
1.0 10 100
C
,
T
O
T
AL
C
A
P
A
C
I
T
AN
C
E (p
F
)
T
V , REVERSE VOLT AGE (V)
Fig. 4 Typical Total Capacitance, Per Element
R
10
0.1
1.0
10
100
1,000
020406080
100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics
GBJ25005 - GBJ2510
Document number: DS21221 Rev. 8 - 2 3 of 4
www.diodes.com October 2009
© Diodes Incorporated
GBJ25005 - GBJ2510
Ordering Information (Note 5)
Part Number Case Packaging
GBJ25005-F GBJ 15/Tube
GBJ2501-F GBJ 15/Tube
GBJ2502-F GBJ 15/Tube
GBJ2504-F GBJ 15/Tube
GBJ2506-F GBJ 15/Tube
GBJ2508-F GBJ 15/Tube
GBJ2510-F GBJ 15/Tube
Notes: 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Package Outline Dimensions
GBJ
Dim Min Max
A 29.70 30.30
B 19.70 20.30
C 17.00 18.00
D 3.80 4.20
E 7.30 7.70
G 9.80 10.20
H 2.00 2.40
I 0.90 1.10
J 2.30 2.70
K 3.0 X 45°
L 4.40 4.80
M 3.40 3.80
N 3.10 3.40
P 2.50 2.90
R 0.60 0.80
S 10.80 11.20
All Dimensions in mm
_
B
C
D
EEG
H
K
J
I
L
M
N
P
R
S
A
GBJ25005 - GBJ2510
Document number: DS21221 Rev. 8 - 2 4 of 4
www.diodes.com October 2009
© Diodes Incorporated
GBJ25005 - GBJ2510
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2009, Diodes Incorporated
www.diodes.com
