SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL31C100JHFNFNE CAP, 10, 630V, 5%, C0G, 1206 Description : Product : Multi-layer Ceramic Capacitor A. Samsung Part Number Series Size Dielectric CL 31 C 100 J H F N F N E Samsung Multi-layer Ceramic Capacitor 1206 (inch code) L: 3.2 0.15 C0G Capacitance tolerance 1.6 W: 0.15 mm Inner electrode Ni Termination Cu Plating Sn 100% 10 5 % Capacitance mm (Pb Free) Product Product for POWER application Rated Voltage 630 V Special Reserved for future use Thickness 1.25 0.15 mm Packaging Embossed Type,7"reel(2,000ea) B. Samsung Reliability Test and Judgement condition Performance Within specified tolerance Test condition 110% 0.5~5Vrms More than 500Mohm 50050 Vdc 60~120 sec. Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Visual inspection 150% of the rated voltage Voltage mechanical breakdown Temperature C0G Characteristics Adhesive Strength (From -55 to 125, Capacitance change should be within 30PPM/) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 0.5 Capacitance 600 min Q Insulation Resistance Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Soldering heat Capacitance change : within 0.25 Tan , IR : initial spec. Solder pot : 2705, 101sec. Performance Vibration Test Moisture Resistance Capacitance change : within 0.25 Tan , IR : initial spec. Capacitance change : within 0.75 Q: 133.33 min IR : High Temperature Resistance Temperature Cycling Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) With rated voltage 402, 90~95%RH, 500 +12/-0 hours More than 25* With 120% of the rated voltage Capacitance change : within 0.3 Q: 300 min Max. operating temperature IR : More than 50* 1000+48/-0 hours Capacitance change : within 0.25 Tan , IR : initial spec. 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.