49
RFH SERIES
ALUMINUM ELECTROLYTIC CAPACITORS
nFeatures
• Miniature, Radial
• Extremely low impedance at high frequency
• For switching mode power supply
• Load life of 5000 hours at 105˚C
Low Z, Low ESR, Miniature
n Specifications
n Case sizes and Dimensions n Ripple current coefficient
• Frequency
• Temperature
≤70˚C 85˚C 105˚C
1.65 1.4 1.0
Temperature
Factor
• Standard lead style
Item
Operating temperature range
Rated working voltage range
Nominal capacitance range
D.C Leakage current(at 20˚C)
Tan (max., at 20˚C, 120Hz)
Characteristics
at low temperature(max.)
(impedance ratio at 120Hz)
Load life
Shelf life
0.34 0.46 0.54 0.70 0.83 1.0
0.45 0.57 0.68 0.80 0.87 1.0
0.55 0.70 0.76 0.88 0.90 1.0
0.67 0.78 0.88 0.90 0.92 1.0
0.82 0.84 0.90 0.94 0.97 1.0
Cap ≤4.7
4.7< Cap ≤47
47< Cap ≤330
330< Cap ≤1000
1000 < Cap
50 120 400 1K 10K 100K
Freq(Hz)
øD
P
ød
D’= [ D +0.5]Max. L’= [ L +1.0]Max. at D ≤8.0
L’ = [L+1.5]Max. at D ≥10.0
5.0 6.3 8.0 10.0 13.0 16.0
18.0
2.0 2.5 3.5 5.0 7.5
Cap(µF)
Performance Characteristics
-55˚C ~ +105˚C
6.3V ~ 50V
10 ~ 15000µ F
The following specifications shall be satisfied when the rated voltage is applied for
the required time.
l ≤0.03CV or 4µA (2 min),Whichever is greater
Where l =Leakage current(µ A) C=Nominal capacitance(µ F) V=Rated voltage (V)
When capacitance is over 1000µ F, T an shall be added 0.02 to the listed value with
increase of every each 1000µ F
After applying rated working voltage for 5000 hours (ø5, 6.3 : 2000 hours, ø8 : 3000
hours) at
+105˚C, and then being stabilized at +20˚C, capacitors shall meet following limits.
Capacitance change Within ± 20% of initial measured value
Tan ≤200% of initial specified value
Leakage current ≤Initial specified value
After storage for 1000 hours at +105˚C with no voltage applied and then being
stabilized at
+20˚C, capacitors shall meet following limits.
Capacitance change Within ± 20% of initial measure value
W.V(V) 6.3 10 16 25 35 50
Z-55˚C/Z20˚C 4 4 3 3 3 2
W.V(V) 6.3 10 16 25 35 50