ROHS COMPLIANT N & BZ USBF TV (USB-A) USB connection system for harsh environment With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device for high vibrations. Applications Embedded computers Data acquisition and transmission in harsh environment Railways Battelfield communication systems Navy systems Data transmission USB specification 2.0 Data rate: up to 480 Mbps for high speed USB Main characteristics Sealed against fluids and dusts (IP68) Shock, vibration and traction resistant No cabling operation in field and no tools required Improved EMI protection T ri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 2 mechanical coding / polarization possibilities by the user (receptacle insert rotation) USBF TV plug retention in the receptacle: 100 N in the axis Mating cycles: 500 minimum Sealing (when mated): IP68 (temporary immersion) Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 1000 h with marine bronze shell Fire retardant / low smoke: UL94 V0 and NF F 16 101 & 16 102 Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s S hocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) Humidity: 21 days, 43C, 98% humidity Temperature range: - 40C / +85C Amphenol Environmental protection Part number code Series USB Field TV USBF TV 2 1 G Shell type 6: plug 2: square flange receptacle 2PE: square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 2PEM: square flange receptacle with backshell + metal gland (only for back termination type 2 = Solder) 7: jam nut receptacle 7PE: jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 7PEM: jam nut receptacle with backshell + metal gland (only for back termination type 2 = Solder) Back terminations (receptacles only) 1: female USB-A 2: solder (4 tinned holes) Shells material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant Examples: - Olive drab cadmium plug: USBF TV 6G - Olive drab cadmium square flange receptacle, USB-A back terminat: USBF TV 21G - Olive drab cadmium jam nut receptacle, USB-A receptacle back terminat: USBF TV 71G - Nickel jam nut receptacle, solder back termination: USBF TV 72N 97 Plug Shell type 6 USBF TV 6 X Receptacles Square flange receptacle 4 mounting holes: shell type 2 USBF TV 2 XX Panel Drilling USBF TV 7 XX Panel Drilling Jam nut receptacle Hexagonal nut mounting: shell type 7 Amphenol Receptacles with backshell: Shell type 2PE and 7PE 86.9[3.422] [3.422] 86.9 Backshell used with back termination type 1: USB A receptacle (Not sealed) Same panel drilling as USBFTV 2xx USBF TV 2PE / 7PE-1 72.7 [2.862] Backshell used with back termination type 2: Solder (Sealed - IP68) USBF TV 2PE(M) / 7PE(M)-2 Back terminations Type 1: female USB-A 98 Type 2: solder 4 Tinned holes to solder your cable View of the PCB of the Type 2 version with 4 tinned holes for solder termination Panel Drilling (for type 2 only) Assembly instructions Can be used with most the USB cordset brands : No tools required! Plug assembly 1. Only if you need a full sealing (IP68): Install the white sticker around the plug, covering the 4 little holes of the overmolding 2. Insert the black O Ring around the front face of the USB A plug. This O Ring will ensure connection sealing 1 2 3 4 5 6 3. Insert the USB cordset into the metallic backshell 4. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB-A plug into this retention spacer 5. Insert the friction ring laterally to the cable 6. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug. Note at this step, the main key is used for polarization. MAIN KEY USB insulation on the left USB insulation on the right PLUG RECEPTACLE 7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help IMPORTANT NOTE 7a 7b Amphenol The connection sealing is not done by the black retention spacer (which is sloted), but by the front face ORing (fig.2) Receptacle assembly Insert the USB module from the rear. Reference is main key. Beware to have a coding compatible with the coding you used for the plug: on front view, the white shapes in the USBs must be on the same side. Example : coding B To remove the USB module, insert the removal tool USBF ODE from the Front, and push back the module. Accessories Metallic caps USBF TVC 2 G Connector type 6: plug 2: square flange receptacle 7: jam nut eceptacle Shells material & finish N: aluminium shell - nickel - ROHS compliant G: aluminium shell - olive drab cadmium BZ: marine bronze shell - ROHS compliant Panel gasket for square flange receptacle Thickness: 0,8 mm [.031] P/n: JE15 Receptacle insert removal tool: p/n USBF ODE 99 ROHS COMPLIANT N & BZ USBF TV Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a must . This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle below. In addition, the Sealed USBF TV has been successfully tested in very high vibration corresponding to airplane applications. Main characteristics Applications Embedded computers Data acquisition and transmission in harsh environment Railways Battelfield communication systems Navy systems Amphenol Data transmission USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB Sealed against fluids and dusts (IP68) Shock, vibration and traction resistant No cabling operation in field and no tools required Improved EMI protection Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti decoupling device - Shell size 15 2 mechanical coding/polarization possibilities by the user (receptacle insert rotation) USBF TV plug retention in the receptacle: 100 N in the axis Mating cycles: 500 minimum Environmental protection Sealing (when mated): IP68 (temporary immersion) Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 1000 h with marine bronze shell Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s Shocks: IK06 weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) Humidity: 21 days, 43C, 98% humidity Temperature range: - 40C / +85C Part number code Series USB Field TV USBF TV 2PES A 2 N 03 Shell Type 2S : square flange receptacle 2PES: square flange receptacle + backshell + plastic gland 2PEMS: square flange receptacle + backshell + metal gland 7S: jam nut receptacle 7PES: jam nut receptacle + backshell + plastic gland 7PEMS: jam nut receptacle + backshell + metal gland Coding "A" (Standard) or "B" Back terminations 2: rugged USB cable (see corresponding datasheet page 109) Shells plating N: nickel G: olive drab cadmium USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: standard USB-A plug OPEN: open cable (no connector) Examples: 100 - Olive drab cadmium square flange receptacle with 30 cm of USB cable and standard USB-A plug: USBF TV 2S G 03 A - Nickel jam nut receptacle + backshell + plastic gland, with 1 meter of USB cable, and a standard USBA-A plug: USBF TV 7PES N10 A A Receptacles Square flange receptacle 4 mounting holes: shell type 2 USBF TV 2SA XXX Panel drilling Jam nut receptacle hexagonal nut mounting: shell type 7 USBF TV 7SA XXX Panel drilling Amphenol Jam nut receptacle hexagonal nut mounting: shell type 7 Backshell used with back termination type 2: Solder (Sealed - IP68) USBFTV 2PE(M) SA2XXX / USBFTV 7PE(M) SA2 XXX Panel drilling Cordset end USB cable end type "A" USB cable type "OPEN" 101 NEW USBF TV ROHS COMPLIANT N & BZ Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a must . This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubit ft per hour] at one bar [15 psi] pressure differential. Applications Embedded computers Data acquisition and transmission in harsh environment Railways Battelfield communication systems Navy systems Data transmission Main characteristics Same as the USBF TV (see page 76)... a complete IP68 sealing of the receptacle is added (even with no plug or no protective cap mated). Outside dimensions are the same as the standard USBF TV (USB-A). Vibrations : the compounded version of the USBF TV has been tested in vibration following the NAS 1599 aeronautic specification (ambient temperature): 5 - 3000 Hz, 20g, 2.5 mm [.1 inch] double amplitude, 3 axes, 12 hours Note: this specification exceeds MIL-C-26500 requirements. USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number. Example: USBFTV 2H A 2 N 03 A MAIN KEY Amphenol USB insulation on the left USB insulation on the right PLUG RECEPTACLE Part number code Series USB Field TV USBF TV 2H A 2 N 03 A Shell type 2H : hermetic square flange receptacle 2PEH: hermetic square flange receptacle + backshell + plastic gland 2PEMH: hermetic square flange receptacle + backshell + metal gland 7H: hermetic jam nut receptacle 7PEH: hermetic jam nut receptacle + backshell + plastic gland 7PEMH: hermetic jam nut receptacle + backshell + metal gland Coding "A" (standard) or "B" Back terminations 2: rugged USB cable (see corresponding datasheet page 109) Shells plating N: nickel G: olive drab cadmium USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: standard USB-A plug OPEN: open cable (no connector) Examples: - Olive drab cadmium hermetic square flange receptacle with 30 cm of USB cable and standard USB-A plug: USBF TV 2H G 03 A - Nickel hermetic jam nut receptacle + backshell + plastic gland, with 1 meter of USB cable, and a standard USBA-A plug: USBF TV 7PEH N10 A 102 NEW USBF TV ROHS COMPLIANT N Receptacles with 360 EMI backshells USBFTV receptacles series with EMI backshells provide 360 shielding: same protection than the one proposed per standard MIL-DTL-38999 serie III connectors. We offer these EMI backshells with square flange and jam nut receptacles. The available platings are nickel or olive drab cadmium. With those solutions we suggest using our reinforced USB cable (shielded - zero halogen jacket) see page 109 We can provide those receptacles: tXJUIDPSETFUBMSFBEZTPMEFSFE tXJUIPVUDPSETFU Amphenol Example with a square flange receptacle (provided without cable) Plating Part number Square flange receptacle Jam nut receptacle Nickel - ROHS compliant KIT40263 KIT40245 Olive drab cadmium KIT40263G KIT40245G IMPORTANT NOTE With receptacles provided without cable, customer will have to solder his cable on the PCB ; please find below the cabling specification. If customer prefers to use his cable, please check with us compatibility with our EMI backshells: www.usbfield.com 103 NEW USBF TV Through bulkhead Receptacle Amphenol Plating Part number P/N Nickel - ROHS compliant USBF TV B 2 N Olive drab cadmium USBF TV B 2 G Nota : could be used with plug USBFTV, nickel and olive drab cadmium. See page 97. 104 ROHS COMPLIANT N USBF TV Stand off receptacles These receptacles can be soldered directly to your PCB. A compound insures a transversal sealing and good performance in high-vibration environments. The shell of those receptacles are in the "Stand Off" style. They can be connected with rugged USBF TV series plugs. Datas for coding A PCB 1.6 A 2.8 PCB 1.6 A 2.8 PCB 1.6 A 2.8 [PCB .063 TO TO .110].110] [PCB .063 [PCB .063 TO .110] Plating P/N for coding A P/N for coding B Nickel - ROHS compliant USBF TV 25 N F459 USBF TV 2S B 5 N F459 Olive drab cadmium USBF TV 25 G F459 USBF TV 2S B 5 G F459 45 45 1.27 1,27 [[0.05] 0,05] 1.27 1,27 [[0.05] 0,05] EMBASES CARREES CONFORME A LA NORME MIL-DTL-38999 SERIE III AVEC FIXATIONS CIRCUIT IMPRIME 4 HOLES M3 4 HOLES M3 THRU THRUALL ALL FOR PCB FOR PCB O25,5 23.01 [0.906] 45 45 15 15 [[0.591] 0,591] 33 [0.118]] [0,118 PANNEAU 5.18 5.18 MAXI PANNEAU MAXI [PANEL ,204 MAXI] [PANEL ,204 MAXI] 4 HOLES TROUS M3 M3 FOR POURPANEL PANNEAU 4 HOLES M3 FOR PANEL 23,8 23.8 [[0.937] 0,937] 15 15 [[0.591] 0,591] Connection side view Main key 41,28 41.28 [[1.625] 1,625] Amphenol 55 [[0.197] 0,197] 4.13 4,13 [[0.163] 0,163] ] 30,96 30.96 [[1.219] 1,219] 23,01 23.01 [[0.906] 0,906] 2.4 2,4 [[0.094] 0,094] 2.54 2,54 [[0.1] 0,1] O 25.5 O25,5 [1.006] [1,006] 4 HOLES M3 THRU ALL FOR PCB Part number 30,96 30.96 [[1.219] 1,219] 23,01 23.01 [[0.906] 0,906] [,138 TO ,157] CARRE 0.6 0.6 CARRE SQUARE[,024] [,024] SQUARE 3.5 A 3.5 A 44 [,138TOTO,157] ,157] [,138 Coding B is also available, please consult us. 0.32 0,32 [[0.013] 0,013] 33.17 33,17 [1.306] [1,306] 13.1 20.07 13,1 20,07 [0.79]] [0.516]] [0,516 [0,79 Square flange receptacle USB insulation on the left USB insulation on the right Plug Receptacle Coding A - Pins position : Coding B - Pins position : 1 & 4 = Power - Red & black wires USB2.0 cable 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield 1 & 4 = Power - Red & black wires USB2.0 cable 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield Recommended PCB hole LAYOUT (Coding A) - Solder side view Nota : for coding B, please consult us. 4 AREAS WITHOUT COMPONENTS [0,118] PANNEAU 5.18 MAXI 23.01 [0.906] 1.27 [0.05] [PANEL ,204 MAXI] 1.27 [0.05] O1.020.05 [,040,002] 2,54 0,05 [0,1 0,0019] 0.32 [,013] 2,54 0,05 [0,1 0,0019] 23.01 [0.906] Panel drilling RECOMMENDED PCB +0.2 0 4 HOLES O3.2 +,008 ] 0 [,126 SQUARE FLANGE RECEPTACLE STAND OFF FOR PCB - DIMENSIONS A Plan originel 105 Jam nut receptacle 4 HOLES M3 THRU ALL 4 HOLES M3 THRU ALL 33.9 Part number Plating available P/N for coding A P/N for coding B Nickel - ROHS compliant USBF TV 75 N F459 USBF TV 7S B 5 N F459 Olive drab cadmium USBF TV 75 G F459 USBF TV 7S B 5 G F459 Connection side view Main key USB insulation on the left Amphenol USB insulation on the right Plug Receptacle Coding B - Pins position : Coding A - Pins position : 1 & 4 = Power - Red & black wires USB2.0 cable 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield 1 & 4 = Power - Red & black wires USB2.0 cable 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield Recommended PCB hole LAYOUT Solder side view Coding A Coding B Panel drilling 106 ROHS COMPLIANT N&B USB 2.0 Receptacle with Self Closing Cap IP54 l e v e l aling f) Se st Proo nd du plash a (S This Self Closing Cap automatically protects the USB Field square flange receptacles (MIL-C-26482 type), protecting your system from dust and water projections. The same cap can be used to protect RJ45, USB3.0, USBB and IEEE1394 receptacles. A spring automatically closes the upper part of the cap when either the RJ Field plug, RJ45 cordset, USB or IEEE1394 cordset, or USB key are removed from the receptacle. USBF 21 X SCC Amphenol 21.9 [.862] [1.062] 26.1 [1.028] 36 [1.417] Version: USB-A (front and back termination) Plating Part number * Metallized inserts (EMI) USBF 21B SCC Black coated No (blank insert) USBF 21N SCC Nickel plated Yes USBF 21G SCC Olive drab cadmium plated Yes * The part number includes the receptacle + the self closing cap Note: Panel gasket with any of these receptacles: JE18 RJF 21 X SCC, USBBF 21 X SCC, & IEEE1394 RJ45 version (see page 25) USB3.0-A version (see page 94) USB-B version (see page 118) IEEE1394 version (see page 143) 107 Metallic Self Closing Cap (SCC) For USBF TV 2.0 square flange receptacles. This Self Closing cap automatically protects the USBF TV (2.0 - type A) square flange receptacles (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the USB plug is removed from the receptacle. Sealing [ 1,1614 ] [ 0,7087 ] O25,3 [ 0,996] 31 [ 1,2205 ] Amphenol IMPORTANT NOTE Metal Self Closing cap are sold separately (without receptacle). Green Nickel Plating Black P/N Black - ROHS compliant USBFTVSCCB Nickel - ROHS compliant USBFTVSCCN Olive drab cadmium USBFTVSCCG Remark: also compatible with USB3FTV (type A) & USBBFTV (type B) square flange receptacles: USB3FTVXX (see page 95) USBBFTV2XX (see page 119) Panel gasket for square flange receptacle (thickness: 0,8 mm [.031]): Part number: JE15 108 29,5 47,5 [ 1,8701 ] 24,61 [ 0,969 ] 30,9 [ 0,2165 ] 24,61 [ 0,969 ] ,25 4- O 3,25 [ 0,128 ] Part number 18 level IP67 40 [ 1,5748 ]