1
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
SMD B
EASV2010BRA0
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
․Compliance with EU REACH
․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm).
Description
․The SMD LED is much smaller than lead frame type components, thus enable smaller board ize, higher
packing density, reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
DATASHEET
SMD REFLECTOR
EASV2010BRA0
2
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
Device Selection Guide
Chip Chip
Type Materials
Emitted Color
Resin Color
BH InGaN
Blue
Water Clear
R7 AlGalnP
Dark-Red
Water Clear
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
BH：10
R7：25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
BH：100
R7：60
mA
Power Dissipation
Pd
BH：40
R7：60
mW
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Electrostatic Discharge
ESDHBM
BH：150
R7：2000
V
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
BH：22.5
R7：14.5
-----
-----
57.0
36.0
mcd
IF =5mA
Viewing Angle
2θ1/2
-----
130
-----
deg
Peak Wavelength
λp
BH：-----
R7：-----
468
639
-----
-----
nm
Dominant Wavelength
λd
BH：465
R7：625
-----
-----
475
635
nm
Spectrum Radiation Bandwidth
△λ
BH：-----
R7：-----
25
20
-----
-----
nm
Forward Voltage
VF
BH：2.70
R7：1.55
-----
-----
3.20
2.15
V
Reverse Current
IR
BH：-----
R7：-----
-----
-----
50
10
μA
VR =5V
Note:
1.Tolerance of Luminous Intensity: ±11%
2.Tolerance of Forward Voltage: ±0.05V
DATASHEET
SMD REFLECTOR
EASV2010BRA0
3
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
Bin Range of Luminous Intensity
BH
Bin Code
Min.
Max.
Unit
Condition
1
22.5
36.0
mcd IF =5mA
2
36.0
57.0
Bin Range of Luminous Intensity
R7
Bin Code
Min.
Max.
Unit
Condition
1
14.5
22.5
mcd IF =5mA
2
22.5
36.0
Bin Range Of Forward Voltage
BH
Bin Code
Min.
Max.
Unit
Condition
1
2.70
2.80
nm IF =5mA
2
2.80
2.90
3
2.90
3.00
4
3.00
3.10
5
3.10
3.20
Bin Range Of Forward Voltage
R7
Bin Code
Min.
Max.
Unit
Condition
1
1.55
1.75
nm IF =5mA
2
1.75
1.95
3
1.95
2.15
Note:
1.Tolerance of Luminous Intensity: ±11%
2.Tolerance of Forward Voltage: ±0.05V
DATASHEET
SMD REFLECTOR
EASV2010BRA0
4
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
Typical Electro-Optical Characteristics Curves
BH
DATASHEET
SMD REFLECTOR
EASV2010BRA0
5
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
Typical Electro-Optical Characteristics Curves
R7
DATASHEET
SMD REFLECTOR
EASV2010BRA0
6
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
Package Outline Dimensions
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
DATASHEET
SMD REFLECTOR
EASV2010BRA0
7
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
Moisture Resistant Packing Materials
Label Explanation
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank
‧REF: Forward Voltage Rank
‧LOT No: Lot Number
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
RoHS
Pb
CPN :
P N : XXXXXXXXXXXXX
XXXXXXXXXXXXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
EVERLIGHT
MADE IN TAIWAN
DATASHEET
SMD REFLECTOR
EASV2010BRA0
8
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
DATASHEET
SMD REFLECTOR
EASV2010BRA0
9
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
recautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~200°C
60~120sec.
Above 217°C
60~150sec.
260°C Max.
10sec. Max.
6°C/sec.Max.
Above255°C
30sec.Max.
3°C/sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the
soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because
the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering
iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will
not be damaged by repairing.
DATASHEET
SMD REFLECTOR
EASV2010BRA0
10
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date :Nov 16 .2013 . Issue No: 1
www.everlightamericas.com
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlightamericas before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
