PTX661-18593 - Druck Incorporated

PTX 661 PRODUCT NOTE

Druck

Hammer Union Pressure

Transmitter

PTX 661

• ±0.1% FS accuracy

• NA CE compatible

• CENELEC Intrinsically Safe

Certified

• FM/CSA Class I, Div 1 Intrinsically

Safe P ending

• CE marked

• Fast response time (2 kHz)

• Repairable

The PTX 661 Hammer Union Pressure Transmitter has

been designed for use in extremely harsh

environments in both on-shore and off-shore Oil

Drilling operations where high shoc k and vibration is

likely to be encountered. The transmit ter is available in

both the 1502 and 2202 WECO Wing Union

configurations, both of whic h are NACE sour gas

compatible.

The PTX 661 differs from other Hammer Union

Pressure Transmit ters in that it has a replaceable

pressure transmitter inser t which substantially reduces

the high cost of transmitter replacement. With a 2 kHz

response time, the device is suitable for measuring

static and dynamic mud pressure.

The PTX 661 incorporates Druck's proprietary

high-accuracy silicon sensor with up to 2.5 times better

accuracy than many competitive devices. The

low-volume oil-fill tecnology allows response times of

faster than 2 kHz. The field-proven 4-20mA electronics,

pac kaged in a rugged enclosure, provide power supply

regulation, reverse polarity , o vervoltage and EMC

protection. The fully encapsulated design provides

exceptional reliability in high shoc k and vibration

environments.

The PTX 661 is CENELEC intrinsically safe certified and

has FM and CSA Class I, Div 1 (Groups A, B, C, D)

intrinsically safe pending.

PDS-A085 10/98

STANDARD SPECIFICATION

Operating Pressure Ranges

0 to 5000, 6000, 10,000 and 15 ,000

psia or psi sg

Overpressure

2X FS to a maximum of 20,000 psi

Pressure Containment

30,000 psi max

Pressure Media

Fluids compatible with 316L Stainless

Steel (NACE compatible), Inconel X750

and Inconel 625

Supply Voltage

10-28 Vdc

The minimum supply voltage that must

appear across the transmitter terminals

is 10 Vdc and is calculated by:

Vmin=Vs-(0.02xRL)

Output Current

4-20 mA (2-wire configuration)

Zero Setting

±1% FS @ 750F

Span Setting

±0.5% FS @ 750F

Combined Non-linearity,

Hysteresis and Repeatability

±0.1% F.S. BSL

Temperature Limits

Process: -400 to +2300F

Ambient: -400 to +2300F

Storage: -600 to +3000F

Compensated: -400 to +1760F

Temperature Effects

TEB: ±1% over the compensated range

INSTALLATION DRAWINGS: Dimensions in inc hes/(mm)

Weight

6 pounds nominal

Response Time

Faster than 0.5msec. (2 kHz)

Pressure Connection

-8547 WECO Wing Union #1502 (shown

in drawing)

-8593 WECO Wing Union #2202

Ingress Protection

Nema 4X

Safety Classifications

CE marked

Baseefa Eex ia IIC T4 amb 800C

BAS No. Ex97D2058

Factory Mutual Research Intrinsic Safe ,

Class I, Div 1 Groups A, B, C

and D Pending

Canadian Standards Association

Intrinsic Safe Class I, Div 1,

Groups A, B, C, D Pending

Electrical Connection

-1 10-pin LEMO Connector

P/N: EGG-4K-310

-2 6-pin Bayonet Connector

P/N: PTIH-10-6P

-3 2-pin Glenair Connector

P/N: GC 379-2-14S-2P (2) Operating Pressure Range (sealed

gauge or absolute)

(3) Options (if required)

OPTIONS

Druc k Incorporated

4 Dunham Drive

New Fairfield CT 06812

Tel: (203) 746-0400

Fax: (203) 7 46-2494

E-Mail:sales@druck.com

http://www.druck.com

Druck

Representative

Druck is an ISO 9000 registered

company.

Continuing development sometimes

necessitates specification changes

without notice.

ORDERING INFORMATION

Carrying Handle P/N: XA2448-1-01

Insertion/Extraction Tool P/N: F2186-1

Replaceable Pressure Transmitter Insert

P/N: PTX 721-8518 (state range)

NIST- traceable 9-pt Room Temperature

Calibration Certificate

Code Model

PTX Current output

Code

661 Base Model

Code

8547 WECO #1502

8593 WECO #2202

Electrical Connection

Pressure Connection

PTX 661 -1 85**

10-pin LEMO Connector

P/N EGG-4K-310

Please state the following:

(1) Type PTX 661-85**

26-pin Bayonet Connector

P/N PTIH-10-6P

32-pin Glenair Connector

P/N GC 379-2-14S-29