FLCDS900BU - Panduit Corp.

key features and benefits

applications

technical information

specifications

LC small form factor (SFF) field polish connectors

with rear pivot latch are TIA/EIA-604 FOCIS-10

compatible. LC simplex and duplex connectors are

field terminable.The fibers shall terminate in 1.25mm

ceramic ferrules with non-optical disconnect

functionality and an average insertion loss of .1dB

per mated pair for multimode and singlemode fiber.

LC Duplex Fiber Optic Connectors

for 1.6mm – 2.0mm Jacketed Cable

Multimode:

FLCDMEI

Singlemode:

FLCDSBU

LC Duplex Fiber Optic Connectors

for 900µm Buffered Fiber

Multimode:

FLCDM900EI

Singlemode:

FLCDS900BU

LC Sr./Jr. SFF Fiber Optic Adapters

Duplex MM:

FADJLCEI-L

Duplex 10G

™

FADJLCAQ-L

Duplex 10G

™

(zirc.):

FADJLCZAQ-L

Simplex 10G

™

(zirc.):

FASJLCZAQ-L

Duplex SM (zirc.):

FADJLCZBU-L

Simplex SM (zirc.):

FASJLCZBU-L

L = Bag of 50 adapters; 100 per carton.

For Sr./Sr., replace J in part number with S.

INI

-C

Sr./Jr. LC Adapter Modules

Duplex MM:

CMDJLC**

Duplex 10G

™

CMDJAQLCBL

Duplex 10G

™

(zirc.):

CMDJAQLCZBL

Duplex SM (zirc.):

CMDJLCZ**

For Sr./Sr., replace J in part number with S.

PTICOM

LC Fiber Adapter Panels

6 duplex 10G

™

FAP6WAQDLCZ

6 duplex MM:

FAP6WEIDLC

6 duplex SM (zirc.):

FAP6WBUDLCZ

12 duplex MM:

FAP12WEIDLC

12 simplex SM (zirc.):

FAP12WBULCZ

PTICOM

UICK

™

Pre-Terminated

MTP* Cassettes

6 LC to MTP* (12f):

FC^-12-10

12 LC to 2 MTP* (24f):

FC^-24-10

PTI

-C

ORE

Fiber Optic Patch Cords

Duplex LC to LC:

F^E10-10M‡

Simplex LC to LC:

F^F10-10M‡

Simplex LC to pigtail:

F^B10-NM‡

LC T ermination T ooling

110V termination kit:

FLPKIT

230V termination kit:

FLPKIT-W

Refurbishment kit:

FLPKIT-RFB

HD Connector Removal Tool

For LC and SC:

HDCRT

**Substitute for module color:

EI = Electric Ivory BU = Blue

IG = International Gray WH = White

TG = Technical Gray BL = Black

AW = Arctic White IW = Off White

EW = European White

^Substitute for fiber type:

X (OM3 –

10G

™50/125µm), 5 (OM2 – 50/125µm),

6 (OM1 – 62.5/125µm) or 9 (OS1 – 9/125µm).

‡Substitute for length in meters: 1, 2, 3, 5 or 10 for

patch cords, and 1, 2 or 3 for pigtails; singlemode

patch cords are also available in 12, 15, 25 or 30

meter lengths. Contact Customer Service for other

available lengths.

LC Simplex Fiber Optic Connectors

for 900µm Buffered Fiber and

1.6mm – 2.0mm Jacketed Cable

Multimode:

FLCSMEI

Singlemode:

FLCSSBU

Standards requirements:

TIA/EIA-604 FOCIS-10 compatible; exceeds

TIA/EIA-568-B.3 requirements

Fiber compatibility:

62.5/125µm OM1, 50/125µm OM2,

10G

™50/125µm laser

optimized OM3 and 9/125µm OS1

Fiber cable type:

900µm tight-buffered cable recommended

Fiber cable size:

1.6mm – 2.0mm jacketed cable

Ferrule type:

Zirconia ceramic ferrule

Insertion loss:

.1dB average (multimode and singlemode)

Return loss:

>20dB (multimode), >40dB (singlemode)

PANDUIT

LC Fiber Optic Connectors provide a

rugged solution for high-density telecommunication

rooms, LANs, public networ ks and fiber-to-the-desk

applications. LC simplex and duplex connectors

are used for equipment cross-connects or

interconnects in backbone, horizontal and work

area applications for high-speed data

transmissions.The high-density design and

1.25mm ferrules double the por t density

(compared to SC connectors) to reduce space

requirements on racks, enclosures, panels

and faceplates.

Rear pivot latch design,

Longer beam reduces deflection during mating and unmating

robust construction

to reduce latch fatigue, leading to longer cycle life

Anti-snag latch

Low profile latch resists cable snagging

Wide “positive grip”

Multi-grooved, full body width thumb latch improves grip for

thumb latch

better control during matings/unmatings; promotes fast, easy

MACs (moves, adds, changes) in high-density applications

Audib le “click” upon

Provides user with a definitive signal of successful

successful mating

connector mating

Field installable duplex

Allows fast, easy field polar ity changes without tools; quick

clip with integrated

identification of polarity

polarity markers

One connector body

A single connector design is used for both simplex

design for both simplex

and duplex patch cords and inside the wall applications to

and duplex applications

simplify installation

Protective cap locks onto

Protective cap automatically locks onto connector latch,

connector latch with

completely covering connector end; prevents ferrule end face

audible “clic k”

damage by providing protection from contamination and impact

Anaerobic adhesive

Simplifies and reduces installation time by 50% compared to

field installation

heat cured epoxy terminations; curing oven/time not required

Rugged body construction

Stable perfor mance under side loads for improved reliability

Independent free-floating

Ensures physical fiber contact for consistent low return loss,

ferrules

unlike unitary multi-fiber ferrule connectors

1.25mm ceramic ferrules

Provide the highest durability for repeated matings

www.panduit.com

SPECIFICATION SHEET

LC Fiber Optic Connectors

*MTP is a registered trademark of US Conec Ltd.

2.20

[56.0]

1.60

[40.6]

LC Simplex Connectors

For 900µm Fiber and

1.6mm – 2.0mm Jacketed Cable For 900µm Fiber or 1.6mm – 2.0mm Jacketed Cable

.25

[6.35]

FLCSMEI, FLCSSBU

FLCDM900EI, FLCDS900BU

LC Duplex Connectors

1.60

[40.6]

.25

[6.35]

LC Fiber Optic Connectors

PANDUIT

Corp.

Printed in the U.S.A.

WW-FBSP13

Replaces SA-FBSP07

10/2005

Dimensions are in inches [Dimensions in brackets are in millimeters].

WORLDWIDE SUBSIDIARIES AND SALES OFFICES

For a copy of

PANDUIT

product warranties, log on to www.panduit.com/warranty

PANDUIT

CANADA

Markham, Ontario

cs-cdn@panduit.com

Phone: 800.777.3300

PANDUIT

EUROPE LTD.

London, UK

cs-emea@panduit.com

Phone: 44.20.8601.7200

PANDUIT

JAPAN

Tokyo, Japan

cs-japan@panduit.com

Phone: 81.3.3767.7011

PANDUIT

SINGAPORE PTE. LTD.

Republic of Singapore

cs-ap@panduit.com

Phone: 65.6379.6700

PANDUIT

AUSTRALIA PTY. LTD.

Victoria, Australia

cs-aus@panduit.com

Phone: 61.3.9794.9020

PANDUIT

LATIN AMERICA

Jalisco, Mexico

cs-la@panduit.com

Phone: 52.333.666.2501

Contact Customer Service by email: cs@panduit.com

or by phone: 800-777-3300 and reference FBSP13

Visit us at www.panduit.com

For more information

performance information

Test Parameter Description Result

Qualification test suite

(TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3

using TIA/EIA FOTPs that include mechanical,

environmental and optical test sequences

Compliant; exceeds

TIA/EIA-568-B.3 requirements

Connector intermatability Dimensional and material compliance to

TIA/EIA standards All connectors are FOCIS compatible

with TIA/EIA-604-10

selection information

Part Number

FLCSMEI Simplex 900µm buffered fiber and

1.6mm – 2.0mm jacketed cable

FLCDMEI Duplex 1.6mm – 2.0mm jacketed cable

FLCDM900EI Duplex 900µm buffered fiber

FLCSSBU Simplex 900µm buffered fiber and

1.6mm – 2.0mm jacketed cable

FLCDSBU Duplex 1.6mm – 2.0mm jacketed cable

FLCDS900BU Duplex 900µm buffered fiber

*All connector inser tion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171.

Connector

Type Cable T ype Fiber Ferrule Housing

Color Boot

Color Return

Loss

Average

Insertion Loss*

Multimode Zirconia

Ceramic Electric

Ivory Electric

Ivory >20

.1dB

Singlemode Zirconia

Ceramic Blue Blue >40

.1dB

FLCDMEI, FLCDSBU

2.20

[56.0]