FLUKE-414D/62MAX+ - Fluke

TECHNICAL DATA

Fluke 1587 FC/1577

Insulation Multimeters

FLUKE CONNECT COMPATIBLE

(1587 FC ONLY)

Download the free Fluke Connect® app

from iTunes or Google Play to enable

graphs within the Pi/DAR function, memory

storage, and temperature compensation

DISPLAY

Large, 6000-count back-lit display

VFD

Low-pass filter for accurate motor drive

measurements (1587 FC only)

INSULATION TEST

1587 FC: 0.01 MΩ to 2 GΩ

1577: 0.1 MΩ to 600 MΩ

INSULATION TEST VOLTAGES

1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V

1577: 500 V, 1000 V

WARRANTY

Three-year standard warranty; extendable

to five-years through product registration

within 45 days of purchase* Store and share data using the Fluke 1587 FC with Fluke Connect Measurements App.

The High-Performance 2-in-1 Insulation DMM

The Fluke 1587 FC and 1577 Insulation Multimeters combine a

digital insulation tester with a full-featured, true-rms digital multi-

meter in a single compact, handheld unit, which provides maximum

versatility for both troubleshooting and preventative maintenance.

The Fluke 1587 FC Insulation Multimeter adds four powerful new

diagnostic functions through the Fluke Connect® Measurements

app:

• PI/DAR timed ratio tests with TrendIt™ graphs identifies moisture

and contaminated insulation problems faster

• Memory storage through Fluke Connect eliminates writing down

results, reduces errors and saves data for historical tracking over

time

• Temperature Compensation through app for establishing accu-

rate baselines and relevant historical comparisons

• Historical tracking and trending of assets identifies degradation

over time, allows real-time decisions to be made in the field

with Fluke Connect® Assets (sold separately)

* Two-year additional warranty offer may be discontinued without notice

2 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Product Highlights

• PI/DAR timed ratio tests (1587 FC only)

• Live circuit detection prevents insulation test if voltage > 30 V is

detected for added user protection

• VFD low-pass filter for accurate motor drive measurements

(1587FC only)

• Auto-discharge of capacitive voltage for added user protection

• Insulation test (1587 FC: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to

600MΩ)

• Insulation test voltages (1587 FC: 50 V, 100 V, 250 V, 500 V,

1000 V),(1577: 500 V, 1000 V) for many applications

• AC/DC voltage, DC millivolts, AC/DC milliamps, Resistance (Ω),

Continuity

• Capacitance, diode test, temperature, Min/Max, frequency (Hz)

(1587 FC only)

• Auto power off to save battery power

• CAT III 1000 V, CAT IV 600 V measurement category

• Large display with backlight

• Rugged, utility hard case allows you to bring everything you

need for the job

• Included accessories: Remote probe, test leads and probes,

alligator clips, (K-type thermocouple, 1587 FC only)

• Accepts optional Fluke TPAK Magnetic Meter Hanger for

convenient hands free operation

• Three-year standard warranty; extendable to five-years through

product registration within 45 days of purchase*

General Specifications

Maximum voltage applied to any terminal and

common

1000 V

Storage temperature -40 °C to 60 °C (-40 °F to 140 °F)

Operating temperature -20 °C to 55 °C (-4 °F to 131 °F)

Temperature coefficient 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)

Relative humidity Noncondensing

0 % to 95 % @ 10 °C to 30 °C (50 °F to 86 °F)

0 % to 75 % @ 30 °C to 40 °C (86 °F to 104 °F)

0 % to 40 % @ 40 °C to 55 °C (104 °F to 131 °F)

Vibration Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument

Radio frequency communication 2.4 GHz ISM Band

Radio frequency certification FCC: T68-FBLE, IC: 6627A-FBLE

Electromagnetic compatibility

International IEC 61326-1: Portable Electromag-

netic Environment; IEC 61326-2-2 CISPR 11:

Group 1, Class A

Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio

frequency energy that is necessary for the internal function of the equipment itself.

Class A: Equipment is suitable for use in all establishments other than domestic and

those directly connected to a low-voltage power supply network that supplies buildings

used for domestic purposes. There may be potential difficulties in ensuring electromag-

netic compatibility in other environments due to conducted and radiated disturbances.

Emissions that exceed the levels required by CISPR 11 can occur when the equipment is

connected to a test object. The equipment may not meet the immunity requirements of

this standard when test leads and/or test probes are connected.

3 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Electrical specifications

AC voltage measurement

Accuracy (1587 FC only)

Range Resolution 50 Hz to 60 Hz

± (% of Rdg +

counts)

60 Hz to 5000 Hz

± (% of Rdg + counts)

600.0 mV 0.1 mV ± (1 % + 3) ± (2 % + 3)

6.000 V 0.001 V ± (1 % + 3) ± (2 % + 3)

60.00 V 0.01 V ± (1 % + 3) ± (2 % + 3)

600.0 V 0.1 V ± (1 % + 3) ± (2 % + 3)1

1000 V 1 V ± (2 % + 3) ± (2 % + 3)1

11 kHz bandwidth

Low-Pass Filter Voltage (1587 FC only)

Range Resolution 50 Hz to 60 Hz

± (% of Rdg +

Counts)

60 Hz to 400 Hz

± (% of Rdg + Counts)

600.0 mV 0.1 mV ± (1 % + 3) + (2 % + 3) - (6 % - 3)

6.000 V 0.001 V ± (1 % + 3) + (2 % + 3) - (6 % - 3)

60.00 V 0.01 V ± (1 % + 3) + (2 % + 3) - (6 % - 3)

600.0 V 0.1 V ± (1 % + 3) + (2 % + 3) - (6 % - 3)

1000 V 1 V ± (2 % + 3) + (2 % + 3) - (6 % - 3)

General specifications cont.

Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment)

Class A: Equipment meets requirements for industrial electromagnetic wave equipment

and the seller or user should take notice of it. This equipment is intended for use in busi-

ness environments and not to be used in homes.

USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.

Enclosure protection IEC 60529: IP40 (non-operating)

Safety IEC 61010-1 Pollution Degree 2

IEC 61010-2-033 CAT IV 600 V/CAT III 1000 V

Batteries Four AA batteries (NEDA 15A or IEC LR6)

Battery life Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation

tests with fresh alkaline batteries at room temperature. These are standard tests of

1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.

Size 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L)

Weight 550 g (1.2 lb)

Altitude Operating 2000 m

Storage 12,000 m

Over-Range capability 110 % of range except for capacitance which is 100 %

Frequency overload protection <107 V-Hz

Fuse Protection for mA input 0.44A, 1000 V, IR 10 kA

4 Fluke Corporation 1587 FC/1577 Insulation Multimeters

1577 accuracy

Range Resolution 50 Hz to 60 Hz

± (% of Rdg + Counts)

600.0 mV 0.1 mV ± (2 % + 3)

6.000 V 0.001 V ± (2 % + 3)

60.00 V 0.01 V ± (2 % + 3)

600.0 V 0.1 V ± (2 % + 3)

1000 V 1 V ± (2 % + 3)

AC Conversion Inputs are ac coupled true-rms responding and specified from 5 % to 100 % of range. Input

signal crest factor can be up to 3 up to 500 V, decreasing linearly to a crest factor ≤1.5 at

1000 V. For non-sinusoidal waveforms add ± (2 % reading + 2 % FS) typical, for a crest factor

up to 3.

Input Impedance 10 MΩ (nominal), <100 pF, ac-coupled

Common mode

rejection ratio

(1 kΩ unbalanced)

>60 dB at dc, 50 or 60 Hz

DC voltage measurement

Range Resolution Accuracy 1587 FC 1

± (% of Rdg + Counts)

Accuracy 1577 1

± (% of Rdg + Counts)

6.000 V dc 0.001 V ± (0.09 % + 2) ± (0.2 % + 2)

60.00 V dc 0.01 V ± (0.09 % + 2) ± (0.2 % + 2)

600.0 V dc 0.1 V ± (0.09 % + 2) ± (0.2 % + 2)

1000 V dc 1 V ± (0.09 % + 2) ± (0.2 % + 2)

1Accuracies apply to ± 100% of range.

Input Impedance: 10 MΩ (nominal), <100 pF

Normal mode rejection ratio: >60 dB @ 50 Hz or 60 Hz

Common mode rejection ratio: >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalanced)

DC millivolts measurement

Range Resolution Accuracy 1587 FC

± (% of Rdg + Counts)

Accuracy 1577

± (% of Rdg + Counts)

600.0 mV dc 0.1 mV ± (0.1 % + 1) ± (0.2 % + 1)

DC and AC current measurement

Range Resolution Accuracy 1587 FC

± (% of Rdg+Counts)

Accuracy 1577

± (% of Rdg+Counts)

Burden voltage

(Typical)

45Hz to

1000Hz

400 mA 0.1 mA ± (1.5 % + 2)1± (2 % + 2)12 mV/mA

60 mA 0.01 mA ± (1.5 % + 2)1± (2 % + 2)1

DC 400 mA 0.1 mA ± (0.2 % + 2) ± (1.0 % + 2) 2 mV/mA

60 mA 0.01 mA ± (0.2 % + 2) ± (1.0 % + 2)

11 kHz bandwidth

Overload: 600 mA for 2 minutes maximum

Fuse protection for mA Input: 0.44 mA, 1000 V, IR 10 kA

AC conversion: Inputs are ac coupled true-rms responding and specified from 5 % to 100 % of range. Input signal crest

factor can be up to 3 up to 300 mA, decreasing linearly to crest factor ≤1.5 at 600 mA. For non-sinusoidal waveforms

add +(2 % reading + 2 % FS) typical, for a crest factor up to 3.

5 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Ohms measurement

Range Resolution Accuracy 1587 FC1

+ (% of Rdg+Counts)

Accuracy 15771

+ (% of Rdg+Counts)

600.0 Ω 0.1 Ω

± (0.9 % + 2) ± (1.2 % + 2)

6.000 kΩ 0.001 kΩ

60.00 kΩ 0.01 kΩ

600.0 kΩ 0.1 KΩ

6.000 MΩ 0.001 MΩ

50.0 MΩ [2] 0.01 MΩ ± (1.5 % + 3) ± (2.0 % + 3)

1Accuracies apply from 0 % to 100 % of range. 2Up to 80 % relative humidity.

Overload protection: 1000 V rms or dc

Open circuit test voltage: <8.0 V dc

Short circuit current: <1.1 mA

Diode test (1587 FC only)

Diode test indication Display voltage drop: 0.6 V at 1.0 mA nominal test current:

Accuracy ± (2 % + 3)

Continuity test

Continuity indication Continuous audible tone for test resistance below 25 Ω and off above 100 Ω.

Maximum reading; 1000 Ω

Open circuit voltage <8.0 V

Short circuit current 1.0 mA typical

Overload protection 1000 V rms

Response time >1 m sec

Frequency measurement (1587 FC only)

Range Resolution Accuracy ± (% of Rdg+Counts)

99.99 Hz 0.01 Hz ± (0.1 % + 1)

999.9 Hz 0.1 Hz ± (0.1 % + 1)

9.999 kHz 0.001 kHz ± (0.1 % + 1)

99.99kHz 0.01 kHz ± (0.1 % + 1)

Frequency counter sensitivity

Input range V ac Sensitivity (RMS Sine Wave)1DC trigger levels to 20 kHz2

5 Hz to 20 kHz 20 kHz to 100 kHz

600.0 mV ac 100.0 mV 150.0 mV NA

6.0 V 1.0 V 1.5 V -400.0 mV and 2.5 V

60.0 V 10.0 V 36.0 V 1.2 V and 4.0 V

600.0 V 100.0 V 12.0 V and 40.0 V

1000.0 V 300.0 V 12.0 V and 40.0 V

1Maximum input for specified accuracy = 10x range (1000 V max). Noise at low frequencies and amplitudes may affect accuracy.

2Usable to 100 kHz with full scale input.

Capacitance (1587 FC only)

Range Resolution Accuracy ± (% of Rdg+Counts)

1000 nF 1 nF ± (1.2 % + 2)

10.00 μF 0.01 μF

100.0 μF 0.1 μF ± (1.2 % + 90 counts)

9999 μF 1 μF

Temperature measurement (1587 FC only)

Range Resolution Accuracy1 ± (% of Rdg+Counts)

-40 ° C to 537 ° C 0.1 °C ± (1 % + 10 counts)

-40 ° F to 998 ° F 0.1 °F ± (1 % + 18 counts)

1Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument.

6 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Insulation specifications

Measurement range Model 1587 FC: 0.01 MΩ to 2 GΩ

Model 1577: 0.1 MΩ to 600 MΩ

Test voltages Model 1587 FC: 50, 100, 250, 500, 1000 V

Model 1577: 500, 1000 V

Test voltage accuracy +20 %, -0 %

Short-Circuit test current 1 mA nominal

Auto discharge Discharge time <0.5 second for C = 1 μF or less

Live circuit detection Inhibit test if terminal voltage > 30 V prior

to initialization of test

Maximum capacitive load Operable with up to 1 μF load

Model 1587 FC

Output voltage Display range Resolution Test current Resistance accuracy

± (% of Rdg + Counts)

50 V (0 % to +20 %) 0.01 to 6.00 MΩ 0.01 MΩ 1 mA @ 50 kΩ ± (3 % + 5 counts)

6.0 to 50.0 MΩ 0.1 MΩ

100 V (0 % to +20 %)

0.01 to 6.00 MΩ 0.01 MΩ

1 mA @ 100 kΩ ± (3 % + 5 counts)6.0 to 60.0 MΩ 0.1 MΩ

60 to 100 MΩ 1 MΩ

250 V (0 % to +20 %) 0.1 to 60.0 MΩ 0.1 MΩ 1 mA @ 250 kΩ ± (1.5 % + 5 counts)

60 to 250 MΩ 1 MΩ

500 V (0 % to +20 %) 0.1 to 60.0 MΩ 0.1 MΩ 1 mA @ 500 kΩ ± (1.5 % + 5 counts)

60 to 500 MΩ 1 MΩ

1000 V (0 % to +20 %)

0.1 to 60.0 MΩ 0.1 MΩ

1 mA @ 1 MΩ ± (1.5 % + 5 counts)

60 to 600 MΩ 1 MΩ

0.6 to 2.0 GΩ 100 MΩ ± (10 % + 3 counts)

Model 1577

500 V (0 % to +20 %) 0.1 to 60.0 MΩ 0.1 MΩ 1 mA @ 500 kΩ ± (2.0 % + 5 counts)

60 to 500 MΩ 1 MΩ

1000 V (0 % to +20 %) 0.1 to 60.0 MΩ 0.1 MΩ 1 mA @ 1 MΩ ± (2.0 % + 5 counts)

60 to 600 MΩ 1 MΩ

7 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Comparison chart

1587 FC 1577

PI/DAR timed ratio measurements with TrendIt™ graphs

through Fluke Connect Measurements app •

Memory storage through Fluke Connect Measurements app •

Temperature Compensation through Fluke Connect

Measurements app •

VFD low-pass filter for accurate motor drive measurements •

Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V •

Insulation test voltages 500 V, 1000 V •

Insulation test: 0.01 MΩ to 2.0 GΩ •

Insulation test: 0.1 MΩ to 600 MΩ •

Auto-discharge of capacitive voltage • •

Insulation test smoothing reading •

Frequency •

Capacitance •

Diode test •

Temperature •

Min/Max •

AC/DC Voltage • •

DC Millivolts • •

AC/DC Milliamps • •

Resistance (0.1 Ω to 50 MΩ) • •

Continuity • •

Three-year warranty • •

Remote probe, test leads, alligator clips • •

K-type thermocouple •

Rugged, utility hard case • •

Auto power off • •

8 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Ordering information

Fluke-1577 Insulation Multimeter

Fluke-1587 FC Insulation Multimeter

Fluke-1587/MDT FC 2-IN-1 ADV Motor & Drive Kit w/9040, i400

1587KIT/62MAX+ FC 2-IN-1 ADV Elec Kit w/62MAX+ i400

Included

Remote probe, test leads, alligator clips, K-type thermocouple

(1587 FC only), hard case, user documentation

Optional accessories

TPAK Magnetic Tool Hanger

i400 AC Current Clamp

C25 Soft Case

Fluke Corporation

PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.

PO Box 1186, 5602 BD

Eindhoven, The Netherlands

For more information call:

In the U.S.A. (800) 443-5853 or

Fax (425) 446-5116

In Europe/M-East/Africa +31 (0) 40 2675 200 or

Fax +31 (0) 40 2675 222

In Canada (800)-36-FLUKE or

Fax (905) 890-6866

From other countries +1 (425) 446-5500 or

Fax +1 (425) 446-5116

Web access: http://www.fluke.com

Specifications subject to change without notice.

Printed in U.S.A. 8/2014 6005917a-en

Modification of this document is not permitted

without written permission from Fluke Corporation.

Fluke. Keeping your world

up and running.®

Fluke Connect® with ShareLive™ video call is the only wireless

measurement system that lets you stay in contact with your entire team

without leaving the field*. The Fluke Connect mobile app is available for

iPhone models 4S and up running iOS 8.0 or higher, iPad Air and iPad

Mini (2nd generation) in an iPhone frame on iPad and iPod Touch (5th

generation) HTC One and One M8 running Android 4.4.x or higher LG G3

and Nexus 5 running Android 4.4.x or higher Samsung Galaxy S4 running

Android 4.3.x or higher Samsung Galaxy S5 running Android 4.4.x or

higher and works with over 20 different Fluke products—the largest

system of connected test tools in the world. And more are on the way. Go

to the Fluke website to find out more.

*Within provider’s wireless service area.

Download the app at:

See it. Save it. Share it.

All the facts, right in the field.

All trademarks are the property of their respective owners. WiFi or cellular service required to share data.

Smartphone, wireless service and data plan not included with purchase. First 5 GB of storage is free. Phone

support details can be viewed at fluke.com/phones.

Smart phone wireless service and data plan not included with purchase.

Fluke Connect is not available in all countries.