Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Operating temperature performance, -40oC to 85oC Wide supply voltage range, 1.8V to 5.5V Size : 1.6mm(L)*1.6mm(W)*0.55mm(H) RoHS compliant, Pb Free and halogen free package Description The ALS-PDIC17-77B/TR8 is consisting of a photodiode and a current amplification IC. EVERLIGHT ALS series product is a good effective solution to the power saving of display backlighting of mobile appliances, such as the mobile phones, NB and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes. Applications Detection of ambient light to control display backlighting Mobile devices - mobile phones, PDAs Computing device - TFT LCD monitor for Notebook computer Consumer device - TFT LCD TV, plasma TV, video camera, digital camera, toys Automatic residential and commercial management Automatic contrast enhancement for electronic signboard Ambient light monitoring device for daylight and artificial light - Street light, CCD/CCTV 1 Copyright Revision :5 (c) LifecyclePhase: 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 Date:2013-06-04 08:06:14.0 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Package Dimensions Top View Light Receiving Area Bottom View Unit : mm Tolerances : 0.1mm 2 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Absolute Maximum Ratings Parameter Symbol Rating Unit Supply Voltage Vcc -0.5~6.0 V Output Voltage Vo Vcc-0.8 V Output Photo Current IPH 0~5 mA Operating Temperature Range Topr -40 ~ +85 C Storage Temperature Range Tstg -40 ~ +100 C Soldering Temperature Range [Note1] Tsol 260 C Note1: For detail reflow time and the recommended temperature profile, please refer to page 9. Recommended Operating Conditions Parameter Symbol Min. Max. Unit Operating Temperature Topr -40 +85 C Supply Voltage Vcc 1.8 5.5 V 3 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Electrical and Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Unit Test Condition Supply Current Icc -- 480 950 A Vcc = 3V, Ev = 1000Lux RL = 1k [Note2] Dark Current ID -- -- 100 nA Vcc=3V , Ev= 0Lux IPH1 40 60 80 A IPH2 -- 96 -- A IPH3 400 600 800 A Photocurrent Ratio IPH2 / IPH1 -- 1.6 -- -- Saturation Output Voltage Vo 2.20 2.35 -- V Peak Sensitivity Wavelength p -- 580 -- nm Rise Time tr -- 75 -- s Fall Time tf -- 200 -- s Delay Time td -- 150 -- s Storage Time ts -- 65 -- s Light Current Switching Time Vcc=3V; Ev= 100Lux [Note1] [Fig.2] Vcc=3V; Ev= 100Lux [Note2] [Fig.2] Vcc=3V; Ev=1000Lux [Note1] [Fig.2] -Vcc=3V; Ev= 100Lx, RL=150K [Fig.3] -- Vcc=3V,RL=5k Ev = 1000 Lux [Fig.4] Note: 1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is substituted in mass production. 2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp. 4 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Fig.1 Block Diagram PDIC15-21C Fig.2 Measurement Method of Light Current Fig.4 Fig.3 Measurement Method of Saturation Output Voltage Switching Time Measurement Method 5 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Typial Electrical and Optical Characteristics Curves Fig.5 Light Current vs. Illuminance Fig.7 Light current vs. Temperature Fig.6 Fig.8 Ta = 25 VCE = 3V EV = 100 Lux 1.4 1.2 Relative light current Relative light current 1.6 Light current vs. Supply Voltage 1.6 2.0 1.8 Dark Current vs. Temperature Light source: White LED 1.2 1.0 0.8 0.6 0.4 0.8 Light source: White LED Vcc = 3V 0.4 0.2 0.0 -60 0.0 -40 -20 0 20 40 60 80 2 100 3 Fig.9 4 5 6 7 Supply voltage (V) Temperature ( ) Spectral Response Fig.10 100 Output Voltage vs. Illuminance 10 Vcc = 3V Ta = 25 80 Output voltage (V) Relative sensitivity 1 60 40 Fluorescent light RL = 5.1 k Incandescent lamp RL = 5.1 k Fluorescent light RL = 30 k Incandescent lamp RL = 30 k Fluorescent light RL = 100 k Incandescent lamp RL = 100 k 0.1 0.01 20 0 200 1E-3 300 400 500 600 700 800 Wavelength (nm) 6 Copyright Revision :5 (c) LifecyclePhase: 900 1000 1100 1200 1 10 100 1000 10000 Illuminance (Lux) Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Fig.11 Consumption current vs. Illuminance 7 Copyright Revision :5 (c) LifecyclePhase: Fig.12 Relative consumption current vs. Temperature Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Converting Photocurrent to Voltage Vcc Current Amp Iph Vout RL CL GND Note: 1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and output saturation voltage: Vout(max.) = Iout(max.) x RL Vout(saturation)Vcc0.8V 3. To avoid 60Hz ripple from fluorescent lamps, we suggest that the time constant must be greater than 0.5 second: RL x CL 0.5 8 Copyright Revision :5 (c) LifecyclePhase: (empirical data) Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Recommended method of storage 1. Do not open moisture proof bag before devices are ready to use. 2. Shelf life in sealed bag from the bag seal date: 18 months at 10C~30C and < 90% RH. 3. After opening the package, the devices must be stored at 10C~30C and 60%RH, and used within 1 year (floor life). 4. If the moisture absorbent material (desiccant material) has faded or unopened bag has exceeded the shelf life or devices (out of bag) have exceeded the floor life, baking treatment is required. 5. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure or recommend the following conditions: 192 hours at 40C +5/-0C and < 5 % RH (reeled/tubed/loose units) or 96 hours at 60C 5C and < 5 % RH (reeled/tubed/loose units) or 24 hours at 125C 5C, not suitable for reel or tubes. Recommended Solder Profile Notice: (1) Reflow soldering should not be done more than two times. (2) When soldering, do not put stress on the devices during heating. (3) After soldering, do not warp the circuit board. 9 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing. 10 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Packing Quantity Specification 3000 PCS/ 1 Reel Label Format Pb CPN: Customer's Production Number EVERLIGHT CPN : P N : XXXXXXXXXXXXX P/N : Production Number QTY: Packing Quantity RoHS XXXXXXXXXXXXX HUE: Peak Wavelength CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX CAT: Ranks REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Reference : XXXXXXXX Reel Dimensions Unit: mm Tolerance: 0.1mm 11 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Tape Dimensions Progressive direction 12 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever DATASHEET Ambient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8 Note: 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 13 Copyright Revision :5 (c) LifecyclePhase: Date:2013-06-04 08:06:14.0 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:Release DLS-0000026 Rev.5 www.everlight.com Expired Period: Forever