Data sheet| Item number:281-623/281-418 2-conductor fuse terminal block; with pivoting fuse holder; for glass cartridge fuse 1/4" x 11/4"; with blown fuse indication by neon lamp; 120 V; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm; CAGE CLAMP(R); 4,00 mm; gray www.wago.com/281-623_281-418 i Picture differs from the item. Color: Item description Note: Terminating Aluminum Conductors WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4mm/12AWG if WAGO "Alu-Plus" Contact Paste is used for termination. "Alu-Plus" Contact Paste Advantages: Automatically destroys the oxide film during clamping. Prevents fresh oxidation at the clamping point. Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block). Provides long-term protection against corrosion. Using terminal blocks with CAGE CLAMP(R) Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with "Alu-Plus" Contact Paste. It is also possible to apply WAGO "Alu-Plus" additionally on the whole surface of the aluminum conductor before termination. Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:: Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 1/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:: 2.5mm = 16A 4mm = 22A Safety information 1: Electrical ratings are given by the fuse and blown fuse indication. Safety information 2: Leakage current in case of a blown fuse: Neon lamp < 0.4 mA Data Electrical data Power loss (max.) Pl (max.) (note) When selecting glass cartridge fuses, make sure that the maximum power loss listed below is not exceeded. The power loss is determined according to IEC or EN 60947-7-3/VDE 0611-6 at 23C. The temperature rise of the terminal block must be checked according to their application and mounting. Higher ambient temperatures represent an additional impact on miniature fuses. Therefore, in such applications, the rated current must be reduced if necessary. More details are available from the manufacturers. Power loss Pl (max.) 2.5W Power loss Pl (note) Overload and short circuit protection (Individual arrangement) Power loss Pl 2 (max.) 1.6W Power loss Pl 2 (note) Overload and short circuit protection (Group arrangement) Power loss Pl 3 (max.) 4 W Power loss Pl 3 (note) Short circuit protection only (Individual arrangement) Verlustleistung Pv max. 4 4 W Verlustleistung Pv 4 Hinweis Short circuit protection only (Group arrangement) Ratings per IEC/EN 60664-1 Ratings per IEC/EN 60947-7-3 Nominal voltage (III/3) 800V Rated surge voltage (III/3) 8kV Rated current 10A Operation status indicator 120V Legend (ratings) (III / 3) Overvoltage category III / Pollution degree 3 Connection data Connection technology CAGE CLAMP(R) Actuation type Operating tool Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 2/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Actuation type Operating tool Connectable conductor materials Copper Aluminum Solid conductor 0.08 ... 4mm/ 28 ... 12AWG Fine-stranded conductor 0.08 ... 4mm/ 28 ... 12AWG Strip length 9 ... 10mm/ 0.35 ... 0.39inch Total number of connection points 2 Total number of potentials 2 Number of levels 1 Wiring type Front-entry wiring Physical data Width 10mm/ 0.394inch Height 60mm/ 2.362inch Mechanical data Design angled Mounting type DIN-35 rail Marking level Center marking Material data Color gray Insulation material Polyamide (PA66) Fire load 0.393MJ Weight 19.8g Commercial data Product Group 1 (Rail Mounted Terminal Blocks) Packaging type BOX Country of origin CN GTIN 4045454871567 Customs tariff number 85369095000 Approvals / Certificates Country specific Approvals Logo Approval Additional Approval Text CSA C22.2 No. 158 Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Certificate name 1505034 Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 3/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 CSA DEKRA Certification B.V. C22.2 No. 158 1505034 KEMA/KEUR DEKRA Certification B.V. EN 60947 NTR NL7135 KEMA/KEUR DEKRA Certification B.V. EN 60947 2160584.31 Approval Additional Approval Text ABS American Bureau of Shipping - 20HG1941090PDA DNV GL Det Norske Veritas, Germanischer Lloyd - TAE00001V2 Ship Approvals Logo Certificate name UL-Approvals Logo Approval Additional Approval Text Certificate name UR Underwriters Laboratories Inc. UL 1059 E45172 Compatible products Push-In type wire jumper Item no.: 249-123 Push-in type wire jumper; 0.75 mm; insulated; 180 mm long; black www.wago.com/249-123 Item no.: 249-125 Push-in type wire jumper; insulated; 60 mm long; black www.wago.com/249-125 Item no.: 249-126 Push-in type wire jumper; 0.75 mm; insulated; 110 mm long; black www.wago.com/249-126 Item no.: 249-127 Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 4/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Item no.: 249-127 Push-in type wire jumper; 0.75 mm; insulated; 250 mm long; black www.wago.com/249-127 Item no.: 210-657 Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; short; multicoloured www.wago.com/210-657 Item no.: 210-658 Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; angled; short; multicoloured www.wago.com/210-658 Item no.: 210-720 Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; multicoloured www.wago.com/210-720 Item no.: 209-106 Mounting carrier; for isolated mounting on DIN 35 rails; gray www.wago.com/209-106 Item no.: 249-116 Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray www.wago.com/249-116 Item no.: 709-153 Cover; Type 1; suitable for cover carrier, type 1; 1 m long; transparent www.wago.com/709-153 Item no.: 281-309 End and intermediate plate; 2.5 mm thick; orange www.wago.com/281-309 Item no.: 281-311 End and intermediate plate; 2.5 mm thick; gray www.wago.com/281-311 tools assembling End plate Marking accessories Item no.: 2009-115 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white www.wago.com/2009-115 Item no.: 2009-115/000-002 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; yellow www.wago.com/2009-115 /000-002 Item no.: 2009-115/000-006 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; blue www.wago.com/2009-115 /000-006 Item no.: 2009-115/000-007 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; gray www.wago.com/2009-115 /000-007 Item no.: 2009-115/000-012 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; orange www.wago.com/2009-115 /000-012 Item no.: 2009-115/000-017 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; light green www.wago.com/2009-115 /000-017 Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 5/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Item no.: 2009-115/000-023 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; green www.wago.com/2009-115 /000-023 Item no.: 2009-115/000-024 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; violet www.wago.com/2009-115 /000-024 Item no.: 793-501 WMB marking card; as card; not stretchable; plain; snap-on type; white www.wago.com/793-501 Item no.: 793-501/000-002 WMB marking card; as card; not stretchable; plain; snap-on type; yellow www.wago.com/793-501 /000-002 Item no.: 793-501/000-005 WMB marking card; as card; not stretchable; plain; snap-on type; red www.wago.com/793-501 /000-005 Item no.: 793-501/000-006 WMB marking card; as card; not stretchable; plain; snap-on type; blue www.wago.com/793-501 /000-006 Item no.: 793-501/000-007 WMB marking card; as card; not stretchable; plain; snap-on type; gray www.wago.com/793-501 /000-007 Item no.: 793-501/000-012 WMB marking card; as card; not stretchable; plain; snap-on type; orange www.wago.com/793-501 /000-012 Item no.: 793-501/000-017 WMB marking card; as card; not stretchable; plain; snap-on type; light green www.wago.com/793-501 /000-017 Item no.: 793-501/000-023 WMB marking card; as card; not stretchable; plain; snap-on type; green www.wago.com/793-501 /000-023 Item no.: 793-501/000-024 WMB marking card; as card; not stretchable; plain; snap-on type; violet www.wago.com/793-501 /000-024 Item no.: 793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on www.wago.com/793-5501 type; white Item no.: 793-5501/000-002 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-002 type; yellow Item no.: 793-5501/000-005 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-005 type; red Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 6/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 type; red Item no.: 793-5501/000-006 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-006 type; blue Item no.: 793-5501/000-007 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-007 type; gray Item no.: 793-5501/000-012 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-012 type; orange Item no.: 793-5501/000-017 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-017 type; green Item no.: 793-5501/000-023 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-023 type; light green Item no.: 793-5501/000-024 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-024 type; violet Jumper Item no.: 210-103 Wire commoning chain; insulated; black www.wago.com/210-103 Item no.: 210-123 Wire commoning chain; insulated; blue www.wago.com/210-123 Item no.: 281-402 Jumper; insulated; gray www.wago.com/281-402 Item no.: 709-110 Wire commoning chain; 2.5 mm; insulated; black www.wago.com/709-110 Item no.: 709-111 Wire commoning chain; 2.5 mm; insulated; black www.wago.com/709-111 Item no.: 709-112 Wire commoning chain; 2.5 mm; insulated; black www.wago.com/709-112 ferrule Item no.: 216-106 Ferrule; Sleeve for 2.5 mm / AWG 14; uninsulated; electro-tin plated; silver-colored www.wago.com/216-106 Item no.: 216-201 Ferrule; Sleeve for 0.5 mm / 20 AWG; insulated; electro-tin plated; white www.wago.com/216-201 Item no.: 216-202 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated; gray www.wago.com/216-202 Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 7/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Item no.: 216-203 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated; red www.wago.com/216-203 Item no.: 216-204 Ferrule; Sleeve for 1.5 mm / AWG 16; insulated; electro-tin plated; black www.wago.com/216-204 Item no.: 216-205 Ferrule; Sleeve for 2.08 mm / AWG 14; insulated; electro-tin plated; yellow www.wago.com/216-205 Item no.: 216-206 Ferrule; Sleeve for 2.5 mm / AWG 14; insulated; electro-tin plated; blue www.wago.com/216-206 Item no.: 216-241 Ferrule; Sleeve for 0.5 mm / 20 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; white www.wago.com/216-241 Item no.: 216-242 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; gray www.wago.com/216-242 Item no.: 216-243 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; www.wago.com/216-243 acc. to DIN 46228, Part 4/09.90; red Item no.: 216-244 Ferrule; Sleeve for 1.5 mm / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; black www.wago.com/216-244 Item no.: 216-246 Ferrule; Sleeve for 2.5 mm / AWG 14; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; blue www.wago.com/216-246 Item no.: 216-301 Ferrule; Sleeve for 0.25 mm / AWG 24; insulated; electro-tin plated; yellow www.wago.com/216-301 Item no.: 216-302 Ferrule; Sleeve for 0.34 mm / 22 AWG; insulated; electro-tin plated; green www.wago.com/216-302 Carrier rail Item no.: 210-112 Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 25 mm; www.wago.com/210-112 silver-colored Item no.: 210-113 Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; unslotted; according to EN 60715; silver-colored www.wago.com/210-113 Item no.: 210-114 Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; unslotted; similar to EN 60715; silver-colored www.wago.com/210-114 Item no.: 210-115 Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 18 mm; www.wago.com/210-115 silver-colored Item no.: 210-118 Steel carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to EN 60715; silver-colored Item no.: 210-196 Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com www.wago.com/210-118 www.wago.com/210-196 Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 8/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Item no.: 210-196 www.wago.com/210-196 Aluminum carrier rail; 35 x 8.2 mm; 1.6 mm thick; 2 m long; unslotted; similar to EN 60715; silver-colored Item no.: 210-197 Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; slotted; similar to EN 60715; silver-colored www.wago.com/210-197 Item no.: 210-198 Copper carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to EN 60715; coppercolored www.wago.com/210-198 Item no.: 210-504 Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; galvanized; according to EN 60715 www.wago.com/210-504 Item no.: 210-505 Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; unslotted; galvanized; according to EN 60715; silver-colored www.wago.com/210-505 Item no.: 210-506 Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; unslotted; galvanized; similar to EN 60715; silvercolored www.wago.com/210-506 Item no.: 210-508 Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; slotted; galvanized; similar to EN 60715; silvercolored www.wago.com/210-508 Item no.: 210-254 Interlocking link; mechanically locks multiple links; 1 m long; transparent www.wago.com/210-254 Item no.: 210-137 Test plug; 2.3 mm O; with 500 mm cable; yellow www.wago.com/210-137 Item no.: 280-404 Test plug adapter; 5 mm wide; for test plug (2.3 mm O); suitable for 1.5 mm - 4 mm tbs; gray www.wago.com/280-404 Item no.: 281-407 Test plug; 6 mm wide; Nominal current 24 A; for 0.08 mm - 2.5 mm; 2,50 mm; gray www.wago.com/281-407 Locking lever check Downloads Documentation Bid Text 281-623/281-418 2017 Mar 14 doc 26.6 kB Download 2019 Feb 19 xml 3.7 kB Download 2019 Apr 3 pdf Download doc - Datei 281-623/281-418 X81 - Datei Additional Information Technical explanations Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com 2.2 MB Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 9/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 2.2 MB CAD/CAE-Data CAD data 2D/3D Models 281-623/281-418 URL Download EPLAN Data Portal 281-623/281-418 URL Download WSCAD Universe 281-623/281-418 URL Download WSCAD Universe 281-623/281-418 URL Download EPLAN Data Portal 281-623/281-418 URL Download ZUKEN Portal 281-623/281-418 URL Download URL Download CAE data Environmental Product Compliance Compliance Search Environmental Product Compliance 281-623/281-418 2-conductor fuse terminal block; with pivoting fuse holder; for glass cartridge fuse 1/4"" x 11/4""; with blown fuse indication by neon lamp; 120 V; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm; CAGE CLAMP(R); 4,00 mm; gray Installation Notes Conductor termination Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 10/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 CAGECLAMP(R) connection Inserting a conductor via screwdriver. With ferruled conductors, it is necessary to use a terminal block one size smaller than the conductor's nominal cross section. Commoning Commoning: Distributing current to several fuseprotected circuits via insulated push-in type jumpers. Testing Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 11/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Voltage test, either at input or output with fuse holder in closed position (live) Through test with fuse holder in open position (no voltage) Voltage test at input in the test slot of the current bar Testing voltage at the output via separate test slot. Measuring current between jumper slot and separate test slot. Testing voltage (input side) via test plug adapter (280404, shown) or test plug (281407). Safety Touch-proof protection in all positions of the fuse holder Fuse holder will remain safely locked open in vertical assemblies. Locking system Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 12/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Ganging several fuse holders with an interlocking link (example shows 8mm wide terminal blocks). Fuse replacement: Fuse replacement: Fuse replacement: Before replacing a fuse, pivot the fuse holder into the locked open position. One end of the fuse is automatically ejected from the holder when opening the cover. Easily removing a fuse by hand. Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 13/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Fuse replacement: Storing a spare fuse (fuse holder without blown fuse indication). Insert a new fuse and snap the cover closed. An intermediate plate is supplied with all 10 mm wide fused disconnect terminal blocks. At the end of an assembly or if there is no adjacent fused disconnect terminal block, an end or intermediate plate must be used. Marking Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 14/15 Data sheet| Item number:281-623/281-418 www.wago.com/281-623_281-418 Fuse holders are printed with correct fuse size. Each fuse holder features two marker slots for custom WMB Multi markers (example shows 8 mm wide terminal blocks). Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 27.02.2021Page 15/15