Adaptor-5V1A SPECIFICATION
Adapter Specification Sheet
PRODUCT ADAPTOR-5V1A BASED ON
THE
STANDARD
OF CE FCC
UL KCC
SAA
C-TICK
ROHS
INPUT AC:100-240V DC: 5V1A
ADAPTERS
VER A1
DATE 11/04/2014
4D Systems Pty Ltd
Adaptor-5V1A
Page 1
www.4dsystems.com.au
YHY DESCRIPTION
SWITCHING
POWER
SHEET
NO.
VER: A1
ADAPTERS PART NO.
1.INPUT REQUIREMENT
2.OUTPUT SPECIFICATION
3.MECHANICAL
4.RELIABILITY
5.ENVIRONMENT
6.OUTLOOKING
7.SAFETY
8. QC CHECK
9. Production of appearance
drawing
10. Label
11.circuit drawing
12.Packing
4D Systems Pty Ltd
Adaptor-5V1A
Page 2
www.4dsystems.com.au
YHY DESCRIPTION
SWITCHING
POWER
SHEET
NO
VER: A1
ADAPTERS PART
NO.
1.INPUT REQUIREMENT
ITEM SPECIFICATION MIN TYP. MAX
NORMAL AC
INPUT VOLTAGE SINGLE PHASE 100Vac 100Vac/
240Vac 240Vac
AC INPUT
VOLTAGE
RANGE
SINGLE PHASE 90Vac 100Vac/
240Vac 264Vac
AC INPUT
FREQUENCY SINGLE PHASE 47Hz 50/60Hz 63Hz
AC INPUT
CURRENT
TYPICAL INPUT VOLTAGE& OUTPUT AT FULL
LOAD. 800mA
AC INRUSH
CURRENT
TYPICAL INPUT VOLTAGE& OUTPUT AT FULL
LOAD , 25℃.20A
EFFICIENCY TYPICAL INPUT VOLTAGE& OUTPUT AT FULL
LOAD 80%
2.OUTPUT SPECIFICATION
ITEM SPECIFICATION MIN TYP. MAX
NORMAL DC
OUTPUT
VOLTAGE
5Vdc
DC OUTPUT
VOLTAGE
RANGE
TYPICAL OUTPUT VOLTAGE ±5% 4.75V 5.25V
LOAD CURRENT
RANGE
0A 1A
PEAK LOAD
CURRENT TIME<60S 1.5A
RIPPLE TYPICAL INPUT VOLTAGE , TYPICAL LOAD
CURRENT , 25℃50mV
HOLD-UP TIME AT TYPICAL INPUT VOLTAGE AND FULL LOAD 10mS
TURN-ON DELAY TYPICAL INPUT VOLTAGE AND TYPICAL LOAD
CURRENT 3S
OVER CURRENT
PROTECTION AUTO RECOVERY 1.5A
4D Systems Pty Ltd
Adaptor-5V1A
Page 3
www.4dsystems.com.au
YHY DESCRIPTION
SWITCHING
POWER
SHEET NO
VER: A1
ADAPTERS PART NO.
3.MECHANICAL
ITEM SPECIFICATION OR TEST CONDITION ACCEPTANCE CRITERIA
BENDING TEST
NORMAL TEMPERATURE NO SHORT CIRCUIT
THE CORD SHALL WITHSTAND WEIGHT OF 200g,
SWINGING FROM
NO BREAKAGE OF THE CORD
LEFT TO RIGHT AT AN ANGLE OF 60 DEG.
1000CYCLE TIMES MIN.
S/R SHALL WITHSTAND WEIGHT OF 1N.
SWINGING FROM LEFT TO
RIGHT AT AN ANGLE OF 60DEG. 1000CYCLE
TIMES MIN.
BENDING SPEED 40CYCLE/MINUTE
VIBRATION
FREQUENCY RANGE:10~55Hz
THERE SHALL BE NO
ABNORMALITY ON THE
APPEARNCE STRUCTURE
AND OPERATING
AMPLITUDE:1.5mm
ACCELERATION: 1G
SWEEP 1 MINUTE FOR X,Y,Z,AXIS EACH
4.RELIABILITY
ITEM TEST CONDITION ACCEPTANCE CRITERIA
SHORT CIRCUIT
PROTECTRON
THE ADAPTER SHALL NOT DAMAGE BY SHORT
THE DC OUTPUT TO GROUND
OVER VOLTAGE
PROTECTION 8V
TEST MEASURES：
C1：0.1uF CERAMICS CAPACITOR
C2：10uF 50V ALUMINUM CAPACITOR
4D Systems Pty Ltd
Adaptor-5V1A
Page 4
www.4dsystems.com.au
TEMPERATURE
UP WITH
TEST AT SURFACE OF THE CASE WITH
TYPICAL
TEMPERATURE UP
UNDER
TYPICAL LOAD AC INPUT AND TYPICAL LOAD IN OUTPUT 35 DEGREES
50/60Hz
HI-POT TEST
BETWEEN INPUT&OUTPUT 3000Vac 60
SECONDS 10mA NO DAMAGE
IT IS BASE ON EN60950 5.2.2 TEST
PROCEDURE.
FOR MASS PRODUCTION, IT IS TESTED BY
3.3KV/1 SECOND.
INSULATION
RESISTANCE INPUT TO OUTPUT,DC 500V >100MΩ
MTBF TYPICAL INPUT&FULL LOAD , 25℃50000 HOURS
LIFE TYPICAL INPUT&FULL LOAD, 40℃1YEARS ABOVE
TYPICAL INPUT&FULL LOAD, 25℃2YEARS ABOVE
BURN-IN AT 30℃(±10℃),NORMAL INPUT VOLTAGE 2~4 HOURS
5.ENVIRONMENT
ITEM SPECIFICATION OR TEST CONDITION min. typ. max.
OPERATING
TEMPERATURE 0℃40℃
STORAGE
TEMPERATURE -20℃85℃
OPERATING
HUMILITY NON-CONDENSING 5%RH 90%RH
STORAGE
HUMILITY NON-CONDENSING 5%RH 90%RH
4D Systems Pty Ltd
Adaptor-5V1A
Page 5
www.4dsystems.com.au
YHY DESCRIPTION
SWITCHING
POWER
SHEET NO
VER: A1
ADAPTERS PART NO.
6.OUTLOOKING
DIMENSION 68(L)X40(W)X35(H)mm
WEIGHT ABOUT 130g
DC OUTPUT
TYPE 2.35*0.7mm
DC OUTPUT
CABLE DC1.5M
INDICATION LABEL
CASE
MATERIAL
PCB
MATERIAL C-5W
7.SAFETY
COMPLY
SAFETY
STANDARDS
STANDARD FILE NO.
EMI
8.QC CHECK
ALL OF THE QUANTITY SHALL BE CHECKED BEFORE SHIPMENT,CHECK
ITEM AS BELOW:
(1)DC PLUG POLE CHECK Miss Liu
(2)OCP FUNCTION CHECK Mr. Lai
(3)DCOUTPUT VOLTAGE CHECK Miss Lee
(4)HIPOT&INSULATION CHECK Mr. Chen
(5)OUTLOOKING CHECK Miss Lee
4D Systems Pty Ltd
Adaptor-5V1A
Page 6
www.4dsystems.com.au
YHY DESCRIPTION
SWITCHING
POWER
SHEET
NO
VER: A1
ADAPTERS PART
NO.
9. Production of appearance drawing
4D Systems Pty Ltd
Adaptor-5V1A
Page 7
www.4dsystems.com.au
12：packing
2. plastic bag
4D Systems Pty Ltd
Adaptor-5V1A
Page 8
www.4dsystems.com.au
1. BOX
Packaging:
Outside box : L 46*W41*H24.5
bag:L190*W120
Quantity:50PCS/CTN
APPROVED BY: CHECKED BY：ISSUE BY:
4D Systems Pty Ltd
Adaptor-5V1A
Page 9
www.4dsystems.com.au
