LS830 MONOLITHIC DUAL N-CHANNEL JFET Linear Systems Ultra Low Leakage Low Drift Monolithic Dual JFET The LS830 is a high-performance monolithic dual JFET featuring extremely low noise, tight offset voltage and low drift over temperature specifications, and is targeted for use in a wide range of precision instrumentation applications. The LS830 features a 5mV offset and 10-V/C drift. The hermetically sealed TO-71 & TO-78 packages are well suited for military applications. (See Packaging Information). LS830 Applications: Wideband Differential Amps High-Speed,Temp-Compensated SingleEnded Input Amps High-Speed Comparators Impedance Converters and vibrations detectors. ELECTRICAL CHARACTERISTICS @ 25C (unless otherwise noted) SYMBOL CHARACTERISTICS MIN. BVGSS Breakdown Voltage 40 BVGGO GateToGate Breakdown 40 TRANSCONDUCTANCE YfSS Full Conduction 70 YfS Typical Operation 50 |YFS12 / Y FS| Mismatch DRAIN CURRENT IDSS Full Conduction 0.5 |IDSS12 / IDSS| Mismatch at Full Conduction GATE VOLTAGE VGS(off) or Vp Pinchoff voltage 0.6 VGS(on) Operating Range GATE CURRENT IGmax. Operating IGmax. High Temperature IGSSmax. At Full Conduction IGSSmax. High Temperature 5 IGGO GatetoGate Leakage OUTPUT CONDUCTANCE YOSS Full Conduction YOS Operating COMMON MODE REJECTION CMR 20 log | V GS12/ V DS| 20 log | V GS12/ V DS| NOISE NF Figure en Voltage CAPACITANCE CISS Input CRSS Reverse Transfer CDD DraintoDrain FEATURES ULTRA LOW DRIFT | V GS12 / T| 5V/C TYP. ULTRA LOW LEAKAGE IG = 80fA TYP. LOW NOISE en = 70nV/Hz TYP. LOW CAPACITANCE CISS = 3pF MAX. ABSOLUTE MAXIMUM RATINGS @ 25C (unless otherwise noted) Maximum Temperatures Storage Temperature 65C to +150C Operating Junction Temperature +150C Maximum Voltage and Current for Each Transistor - Note 1 VGSS Gate Voltage to Drain or Source 40V VDSO Drain to Source Voltage 40V IG(f) Gate Forward Current 10mA IG Gate Reverse Current 10A Maximum Power Dissipation Device Dissipation @ Free Air - Total 400mW @ +125C MATCHING CHARACTERISTICS @ 25C UNLESS OTHERWISE NOTED SYMBOL CHARACTERISTICS VALUE UNITS CONDITIONS | V GS12 / T| max. DRIFT VS. 5 V/C VDG=10V, ID=30A TEMPERATURE TA=55C to +125C | V GS12 | max. OFFSET VOLTAGE 25 mV VDG=10V, ID=30A TYP. 60 MAX. UNITS V V CONDITIONS VDS = 0 ID=1nA I G= 1nA ID= 0 I S= 0 Click To Buy Note 1 - These ratings are limiting values above which the serviceability of any semiconductor may be impaired 300 100 0.6 500 200 3 mho mho % VDG= 10V VDG= 10V VGS= 0V f = 1kHz ID= 30A f = 1kHz 1 10 5 mA % VDG= 10V VGS= 0V 2 4.5 4 V V VDS= 10V VDS=10V ID= 1nA ID=30A 5 1 0.1 0.1 0.2 0.5 pA nA pA nA pA 5 0.5 mho mho 90 90 dB 20 1 70 dB nV/Hz 3 1.5 0.1 pF pF pF VDG= 10V ID= 30A TA= +125C VDS =0 VGS= 0V, VGS= 20V, TA= +125C VGG = 20V VDG= 10V VDG= 10V VGS= 0V ID= 30A VDS = 10 to 20V ID=30A VDS = 5 to 10V ID=30A VDS= 10V VGS= 0V RG= 10M f= 100Hz NBW= 6Hz VDS=10V ID=30A f=10Hz NBW=1Hz VDS= 10V, VGS= 0V, f= 1MHz VDS= 10V, VGS= 0V, f= 1MHz VDS= 10V, ID=30A TO-71 & TO-78 (Top View) Available Packages: LS830 / LS830 in TO-71 & TO-78 LS830 / LS830 available as bare die Please contact Micross for full package and die dimensions Tel: +44 1603 788967 Email: chipcomponents@micross.com Web: http://www.micross.com/distribution Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.