SPECIFICATION * Samsung P/N : CL03A333KQ3NNNC , 6.3V, 10%, X5R, 0201 * Description : CAP, 33 * Supplier : Samsung electro-mechanics * Product : Multi-layer Ceramic Capacitor A. Samsung Part Number Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness CL 03 A 333 K Q 3 N N N C Samsung Multi-layer Ceramic Capacitor 0201 (inch code) L: 0.6 0.03 mm 0.3 0.03 mm W: Inner electrode Termination X5R 33 10 % Ni Cu Sn 100% Plating (Pb Free) Normal 6.3 V Product Special 0.3 0.03 mm Packaging Cardboard Type, 7" reel Reserved for future use B. Samsung Reliablility Test and Judgement condition Performance 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characterisitcs Adhesive Strength (From -55 to 85, Capacitance change shoud be within 15%) No peeling shall be occur on the 200gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Moisture Capacitance change : Resistance Tan : 0.125 max IR : Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) within 12.5% With rated voltage 402, 90~95%RH, 500+12/-0hrs 12.5* or Over High Temperature Capacitance change : Resistance Tan : 0.125 max IR : Test condition within 12.5% With 150% of the rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.