SST-90 Product Datasheet SST-90 LEDs Table of Contents Technology Overview. . . . . . 2 Features: * Extremely high optical output: Over 2,100 White Lumens Over 500 Red Lumens Over 950 Green Lumens Over 200 Blue Lumens Test Specifications . . . . . . . . . 2 White Binning Structure. . . . 3 White Chromaticity Bins. . . . 4 Monochromatic Binning structure. . . . . . . . . . . . . . . . . . . 8 Product Shipping & Labeling Information. . . . . . . 9 Electrical Characteristics. . 10 SST-90 W Lifetime & Lumen Maintenance. . . . . . . . . . . . . . 11 Spectral Characteristics. . . 11 SST-90- RGB Electrical Characteristics. . . . . . . . . . . . 12 * Extremely high efficiency: Over 100 lumens per watt at 3.15A for white * High thermal conductivity package - junction to case thermal resistance of only 0.64 C/W * Large, monolithic chip with uniform emitting area of 9 mm2 * Lumen maintenance of greater than 70% after 60,000 hours * Environmentally friendly: RoHS compliant * Variable drive currents: less than 1 A through 9 A * High reliability * Electrically isolated thermal path Applications * Replacement Lamps * High Bay Lighting * Architectural Lighting * Wide Area Lighting * Retail Lighting * Street Lighting Thermal Resistance . . . . . . . 17 * Residential Lighting * Medical Lighting Mechanical Dimensions . . . 18 * Consumer Portable * Emergency Vehicle Lighting * Spot Lighting * Displays and Signage Radiation Patterns . . . . . . . . 17 Solder Profile . . . . . . . . . . . . . 20 Ordering Information . . . . . 21 1 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Technology Overview Luminus Big Chip LEDsTM benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency. Photonic Lattice Technology and longer lifetimes. Luminus' photonic lattice technology enables large area LED chips with uniform brightness over the entire LED chip surface. The optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power LEDs cannot. Reliability For red, green and blue LEDs, the photonic lattice structures extract more light and create radiation patterns that are more collimated than traditional LEDs. Having higher collimation from the source increases optical collection efficiencies and simplifies optical designs. Designed from the ground up, Luminus Big Chip LEDs are one of the most reliable light sources in the world today. Big Chip LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 60,000 hours, Luminus Big Chip LEDs are ready for even the most demanding applications. Environmental Benefits Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to case of 0.64 C/W. Luminus SST-90 LEDs have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All Big Chip LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury. Understanding Big Chip LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus' products. Testing Temperature Multiple Operating Points (3.15, 6.3, 9.0 A) Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This measurement is accomplished by mounting the devices on a 40C heat sink and allowing the device to reach thermal equilibrium while fully powered. Only after the device reaches equilibrium are the measurements taken. This method of measurement ensures that Luminus Big Chip LEDs perform in the field just as they are specified. The tables on the following pages provide typical optical and electrical characteristics. Since the LEDs can be operated over a wide range of drive conditions (currents from less than 1.0 A to 9.0 A, and duty cycle from <1% to 100%), multiple drive conditions are listed. SST-90 LEDs are production tested at 3.15 A. The values shown at other 6.3 A and 9.0 A are for additional reference at other possible drive conditions. Luminus surface mount LEDs are typically tested with a 20mSec input pulse and a junction temperature of 25C. Expected flux values in real world operation can be extrapolated based on the information contained within this product data sheet. 2 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet SST-90 White Binning Structure SST-90 white LEDs are tested for luminous flux and chromaticity at a drive current of 3.15 A (350 mA/mm2) and placed into one of the following luminous flux (FF) and chromaticity (WW) bins: Flux Bins Flux Bin (FF) Minumum Flux (lm) @ 3.15A Maximum Flux (lm) @ 3.15A L2 630 665 L3 665 700 M 700 850 M2 750 800 M3 800 850 N 850 1,000 N2 900 950 N3 950 1,000 *Note: Luminus maintains a +/- 6% tolerance on flux measurements. Chromaticity Bins Luminus' Standard Chromaticity Bins: 1931 CIE Curve 0.470 2700K 0.445 3000K 3500K EU ES V4 0.420 4000K 0.395 CIEy 0.345 EF F4 M4 M3 K3 H4 J3 G4 R3 W3 Y4 BB Locus Y3 DY DV DT Q3 P3 N3 J4 S3 V3 W4 DR DP DM H3 G3 DJ F3 0.320 DG DE 0.270 0.275 N4 K4 EH 6500K 0.295 EK 5700K U3 T3 Q4 P4 0.370 S4 R4 EN 5000K T4 EQ 4500K U4 EW DF 0.300 0.325 0.350 0.375 0.400 0.425 0.450 0.475 0.500 CIEx 3 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet The following tables describe the four chromaticity points that bound each chromaticity bin. Chromaticity bins are grouped together based on the color temperature. 6500K Chromaticity Bins Bin Code (WW) DG F3* F4* G3* G4* EF DE DF 5700K Chromaticity Bins CIEx CIEy 0.307 0.322 0.323 0.316 0.309 0.302 0.305 0.313 0.315 0.319 0.307 0.311 0.303 0.312 0.313 0.329 0.305 0.321 0.313 0.321 0.322 0.326 0.315 0.319 0.312 0.321 0.321 0.337 0.313 0.329 0.302 0.320 0.321 0.348 0.303 0.330 0.283 0.304 0.303 0.330 0.307 0.311 0.289 0.293 0.289 0.293 0.307 0.311 0.309 0.302 0.293 0.285 Bin Code (WW) CIEx CIEy 0.311 0.322 0.324 0.326 0.337 0.337 0.336 0.326 0.323 0.314 0.321 0.321 0.335 0.329 0.329 0.342 0.329 0.331 0.322 0.324 0.330 0.321 0.346 0.339 0.329 0.354 0.329 0.342 0.321 0.335 0.329 0.329 0.342 0.337 0.337 0.349 0.337 0.337 0.330 0.331 0.339 0.329 0.354 0.348 0.338 0.362 0.337 0.349 0.329 0.342 0.335 0.320 0.352 0.354 0.338 0.368 0.338 0.362 0.321 0.346 DJ H3* H4* J3* J4* EH *Sub-bins within ANSI defined quadrangles per ANSI C78.377-2008 4 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet 5000K Chromaticity Bins Bin Code (WW) EK K3* K4* M3* M4* DM 4500K Chromaticity Bins CIEx CIEy 0.338 0.356 0.355 0.376 0.338 0.362 0.337 0.345 0.345 0.343 0.337 0.337 0.338 0.347 0.345 0.355 0.337 0.349 0.345 0.353 0.352 0.372 0.344 0.343 0.346 0.355 0.353 0.362 0.345 0.355 0.337 0.352 0.350 0.337 0.336 0.326 Bin Code (WW) CIEx CIEy 0.368 0.356 0.384 0.384 0.376 0.396 0.374 0.387 0.355 0.374 0.349 0.353 0.360 0.355 0.361 0.366 0.359 0.352 0.351 0.347 0.362 0.355 0.374 0.369 0.364 0.381 0.361 0.366 0.353 0.360 0.355 0.361 0.366 0.349 0.370 0.373 0.367 0.358 0.359 0.352 0.369 0.364 0.381 0.376 0.374 0.387 0.370 0.373 0.361 0.366 0.337 0.351 0.347 0.349 0.367 0.358 0.364 0.346 0.350 0.335 EN N3* N4* P3* P4* DP *Sub-bins within ANSI defined quadrangles per ANSI C78.377-2008 5 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet 4000K Chromaticity Bins Bin Code (WW) EQ Q3* Q4* R3* R4* DR 3500K Chromaticity Bins CIEx CIEy 0.376 0.404 0.401 0.404 0.374 0.387 0.370 0.382 0.378 0.365 0.367 0.358 0.374 Bin Code (WW) CIEx CIEy 0.396 0.403 0.411 0.414 0.435 0.427 0.430 0.417 0.400 0.402 0.373 0.394 0.385 0.380 0.407 0.392 0.402 0.375 0.389 0.369 0.387 0.400 0.402 0.387 0.396 0.415 0.409 0.382 0.380 0.407 0.392 0.385 ES S3* S4* 0.370 0.373 0.394 0.382 0.380 0.407 0.392 0.395 0.388 0.422 0.399 0.390 0.372 0.415 0.381 0.378 0.365 0.402 0.375 0.387 0.396 0.415 0.409 0.401 0.404 0.430 0.417 0.395 0.388 0.422 0.399 0.382 0.380 0.407 0.392 0.367 0.358 0.389 0.369 0.390 0.372 0.415 0.381 0.386 0.359 0.409 0.369 0.364 0.346 0.385 0.357 T3* T4* DT *Sub-bins within ANSI defined quadrangles per ANSI C78.377-2008 6 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet 3000K Chromaticity Bins Bin Code (WW) EU U3* U4* V3* V4* DV 2700K Chromaticity Bins CIEx CIEy 0.435 0.462 0.456 0.426 0.430 0.417 0.422 0.434 0.426 0.385 0.415 0.381 0.430 Bin Code (WW) CIEx CIEy 0.427 0.462 0.437 0.437 0.488 0.444 0.481 0.432 0.456 0.426 0.399 0.447 0.408 0.403 0.458 0.410 0.448 0.392 0.437 0.389 0.417 0.456 0.426 0.443 0.421 0.469 0.429 0.434 0.403 0.458 0.410 0.408 EW W3* W4* 0.422 0.399 0.447 0.434 0.403 0.458 0.410 0.447 0.408 0.437 0.389 0.426 0.443 0.456 0.426 0.447 0.408 0.434 0.415 0.437 0.389 0.431 0.377 0.409 0.369 0.70 0.413 0.459 0.394 0.385 0.448 0.392 0.421 0.469 0.429 0.481 0.432 0.470 0.413 0.403 0.458 0.410 0.381 0.437 0.389 0.459 0.394 0.452 0.382 0.431 0.377 Y3* Y4* DY *Sub-bins within ANSI defined quadrangles per ANSI C78.377-2008 7 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet SST-90 RGB Bins Structure SST-90 RGB LEDs are specified for luminous flux and wavelength at a drive current of 3.15 A (0.35 A/mm2) and placed into one of the following luminous flux (FF) and wavelength (WW) bins: Flux Bins Color Luminous Flux Bin (FF) Minimum Flux (lm) @ 3.15A Maximum Flux (lm) @ 3.15A BG 275 350 BH 350 475 CF 640 775 CG 775 940 DE 90 120 DF 120 160 DG 160 200 Wavelength Bin (FF) Minimum Wavelength @ 3.15A Maximum Wavelength @ 3.15A R2 611 615 R3 615 619 R4 619 623 R5 623 627 R6 627 631 R7 631 635 G2 510 515 G3 515 520 G4 520 525 G5 525 530 G6 530 535 G7 535 540 G8 540 545 B4 450 455 B5 455 460 B6 460 465 B7 465 470 B8 470 475 Red Green Blue Wavelength Bins Color Red Green Blue Note 1: Luminus maintains a +/- 6% tolerance on flux measurements. Note 2: Only specific bins are available for large order, contact Luminus sales team for more information. 8 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Product Shipping & Labeling Information All SST-90 products are packaged and labeled with their respective bin as outlined in the tables and charts from pages 3 to 8. When shipped, each package will only contain one bin. The part number designation is as follows: SST 90 WNNX F11 FF WW Product Family Chip Area Color Package Configuration Flux Bin Chromaticity Bin Surface Mount (Lens) 9.0 mm2 CCT & CRI See Note 1 below Internal Code See page 3 for bins See page 4-7 for bins Note 1: WNNX nomenclature corresponds to the following: W = White NN = color temperature, where: 65 corresponds to 6500K X = color rendering index, where: S (standard) corresponds to a typical CRI of 70 Example 1: The part number SST-90-W65S-F11-N3-G4 refers to a 6500K standard CRI white, SST-90 emitter, with a flux range from 950 to 1,000 lumens and a chromaticity value within the box defined by the four points (0.313, 0.338), (0.321, 0.348), (0.322, 0.336), (0.312, 0.328). SST 90 X F11 FF WW Product Family Chip Area Color Package Configuration Flux Bin Wavelength Bin Surface Mount (Lens) 9.0 mm2 R: Red G: Green B: Blue Internal Code See page 8 for bins See page 8 for bins Example2: The part number SST-90-R-C11-BJ-R4 refers to a red, SST-90 surface mount, with a flux range of 475-600 lumens and a wavelength range of 619 nm to 623 nm. Note 2: Some flux and chromaticity/ wavelength bins may have limited availability. Application specific bin kits, consisting of multiple bins, may be available. For ordering information, please refer to page 21 and reference the PDS-001692: SST-90 Binning & Labeling document. 9 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Electrical Characteristics1 Optical and Electrical Characteristics (TJ = 25 C) Drive Condition2 Parameter Current Density Forward Voltage 3.15 A 9.0 A Symbol Values at Test Currents Typical Values at Indicated Current3 Unit j 0.35 1.0 A/mm2 VF, min 2.5 VF, typ 3.25 VF, max 3.9 V 3.87 V V Common Characteristics Parameter Viewing Angle Symbol Values 2 1/2 100 Emitting Area Unit 9.0 mm2 Emitting Area Dimensions 3x3 mmxmm Forward Voltage Temperature Coefficient4 -2.45 mV/C Absolute Maximum Ratings Parameter Symbol Maximum Current 5 Maximum Reverse Current Values Unit 9.0 A N/A Maximum Junction Temperature 6 Tj-max Storage Temperature Range 150 C -40/+100 C Note 1: Listed drive conditions are typical for common applications. SST-90 White devices can be driven at currents ranging from <1A to 9A and at duty cycles ranging from <1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. Note 2: Unless otherwise noted, values listed are typical. Note 3: Forward voltage temperature coefficient at 3.15A. Contact Luminus for value at other drive conditions. Note 4: SST-90 White devices are designed for operation to an absolute maximum forward drive current 9A. Product lifetime data is specified at recommended forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to APN-001522: Reliability Application Note for SST-90-W for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. Note 5: Lifetime dependent on LED junction temperature . Thermal calculations based on input power and thermal management system should be performed to ensure Tj is maintained below Tjmax rating or life will be reduced. Refer to APN-001522 for further information. Note 6: CIE measurement uncertainty for white devices is estimated to be +/- 0.01. Note 7: Special design considerations must be observed for operation under 1A. Please contact Luminus for further information. Note 8: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye. 10 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Relative Output Flux vs. Forward Current1 Forward Current vs. Forward Voltage 9.0 300% 8.0 7.0 Forward Current (A) Relative Luminous Flux (%) 250% 200% 150% 100% 6.0 5.0 4.0 3.0 2.0 50% 1.0 0% 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 0.0 9.0 2.5 2.7 2.9 3.1 Forward Current (A) Mean Lifetime2 3.7 3.9 4.1 1.2 140 1 120 Lumen Maintenance Device Junction Temperature (C) 3.5 Lumen Maintenance vs. Time3 160 100 80 60 40 0.8 L70 0.6 0.4 Measured Extrapolated 0.2 20 0 1,000 10,000 0 100,000 100 1,000 Median Lifetime Extrapolation (Hours) 9 80% 8 LED Drive Current (A) 10 90% 70% 6500K CCT 50% 4500K CCT 3000K CCT 40% 100,000 Current Derating Curve 100% 60% 10,000 Time (hours) Typical Relative Spectral Power4 Relative Spectral Power Distribution (%) 3.3 Forward Voltage (V) 30% 7 6 5 4 Rth Rth Rth Rth 3 20% 2 10% 1 j-a j-a j-a j-a = = = = 1.82 2.00 3.00 4.00 C/W C/W C/W C/W 0 0% 400 450 500 550 600 650 700 0 750 20 40 60 80 100 120 140 Ambient Temperature (C) Wavelength (nm) Note 1: Yellow squares indicate typical operating conditions. Note 2: Mean expected lifetime in dependence of junction temperature at 0.35 A/mm2 in continuous operation. Lifetime defined as time to 70% of initial intensity. Based on lifetime test data of uncoated GaN devices at this time. Data can be used to model failure rate over typical product lifetime (contact Luminus for lifetime reliability test data for 1A/mm2 condition). Note 3: Lumen maintenance in dependence of time at 0.35 A/mm2 in continuous operation with junction temperatures of 100 C. Note 4: Typical spectrum at current density of 0.35 A/mm2 in continuous operation. 11 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Optical & Electrical Characteristics Red 3.2 A Continuous Drive Condition2 Parameter 6.3 A Continous Symbol Current Density Forward Voltage Luminous Flux4 Values3 Unit j 0.35 0.7 A/mm2 VF min TBD - V VF 2.0 2.2 V VF max TBD - V V typ 400 640 lm d 624 624 nm 1/2 16 19 nm x 0.695 0.699 - y 0.305 0.301 - Dominant Wavelength 5 FWHM Chromaticity Coordinates6,7 Relative Output Flux vs. Forward Current1 Forward Current vs. Forward Voltage 7 250% 225% 6 200% 5 150% 4 IF (A) 175% v 125% 3 100% 75% 2 50% 1 25% 0 0% 0 1 2 3 4 IF (A) 5 6 7 0 0.5 1 1.5 2 2.5 VF (V) Yellow squares indicate reference drive conditions Notes: See page 15 12 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Optical & Electrical Characteristics Green 3.15 A Continuous Drive Condition2 Parameter 6.3 A Continous Symbol Current Density Forward Voltage Luminous Flux4 Dominant Wavelength 5 FWHM Chromaticity Coordinates6,7 Values3 j 0.35 VF min TBD Unit 0.7 A/mm2 V VF 3.4 VF max TBD 3.7 V V typ 855 1485 lm d 537 533 nm 1/2 35 38 nm x 0.205 0.175 - y 0.740 0.730 - V Relative Output Flux vs. Forward Current1 Forward Current vs. Forward Voltage 200% 7 175% 6 150% 5 125% IF (A) 4 v 100% 3 75% 2 50% 1 25% 0 0% 0 1 2 3 4 IF (A) 5 6 7 0 1 2 3 4 VF (V) Yellow squares indicate reference drive conditions Notes: See page 15 13 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Optical & Electrical Characteristics Blue 3.15 A Continuous Drive Condition2 Parameter 6.3 A Continous Symbol Current Density Forward Voltage Luminous Flux 4 Dominant Wavelength5 FWHM Chromaticity Coordinates6,7 Values3 Unit j 0.35 0.7 A/mm2 VF min TBD VF 3.4 VF max TBD V typ 180 315 lm d 465 464 nm 1/2 21 24 nm x 0.142 0.142 0.142 y 0.036 0.038 0.038 V 3.6 V V Relative Output Flux vs. Forward Current1 Forward Current vs. Forward Voltage 200% 7 175% 6 150% 5 125% IF (A) 4 v 100% 3 75% 2 50% 1 25% 0 0% 0 1 2 3 4 IF (A) 5 6 7 0 1 2 3 4 VF (V) Yellow squares indicate reference drive conditions Notes: See page 15 14 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Optical & Electrical Characteristics Notes Note 1: All ratings are based on a junction test temperature Tj = 25C. See Thermal Resistance section for Tj definition. Note 2: Listed drive conditions are typical for common applications. SST-90 RGB devices can be driven at currents ranging from <1 A to 6.3 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. Note 3: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 0.35mA. Other values are for reference only. Note 4: Total flux from emitting area at listed dominant wavelength. Reported performance is included to show trends for a selected power level. For specific minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact Luminus. Note 5: Minimum and Maximum Dominant Wavelengths are based on typical values +/- 5nm for Red, +/- 8nm for Green and +/- 6nm for Blue. Note 6: In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1. Note 7: For reference only. Common Characteristics Symbol Red Green Blue Unit 9.0 9.0 9.0 mm2 3.0x3.0 3.0x3.0 3.0x3.0 mmxmm 0.03 0.04 0.02 Thermal Coefficient of Photometric Flux -0.96 -0.18 -0.007 %/ C Thermal Coefficient of Radiometric Flux -0.52 -0.20 -0.17 %/ C Thermal Coefficient of Junction Voltage -1.3 -4.6 -3.5 mV/ C Symbol Red Green Blue Unit 27 27 27ss A Tjmax 125 150 150 C -40/+100 -40/+100 -40/+100 C Emitting Area Emitting Area Dimensions Dynamic Resistance dyn Absolute Maximum Ratings Maximum Current Maximum Junction Temperature Storage Temperature Range Note 1: SST-90 RGB LEDs are designed for operation to an absolute maximum current as specified above. Product lifetime data is specified at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents will result in a reduction of device life ime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the lifetime derating curves for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. Note 2: Lifetime dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure lifetime. See charts on pg 16 for further information. 15 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Light Output and Spectral Characteristics Over Heat Sink Temperature 3 Relative Dominant Wavelength Shift (nm) Relative Luminous Flux (%) 120% 110% 100% 90% 80% 70% 60% 50% 40% 20 30 40 50 60 70 80 90 2.5 2 1.5 1 0.5 0 -0.5 -1 -1.5 20 30 Median Lifetime Estimate vs. Tj13 60 70 80 90 Lumen Maintenance14 160 120% 140 Lumen Maintenance (%) Device Junction Temperature (C) 50 Heat Sink Temperature Heat Sink Temperature 120 100 80 60 40 20 0 1,000 10,000 100% 80% L70 60% L50 40% Measured Extrapolated 20% 0% 100,000 100 Median Lifetime Estimate (hours) Typical Spectrum15 1,000 10,000 Time (hours) 100,000 Relative Flux vs. Junction Temperature 1.2 100% 1 90% 80% 0.8 Relative Luminous Flux (%) Relative Spectral Power Distribution 40 0.6 0.4 0.2 70% 60% 50% 40% 30% 20% 0 10% 400 450 500 550 600 650 700 0% 25 Wavelength (nm) 50 75 100 125 150 Junction Temperature (C) Note 13. Median lifetime estimate as a function of junction temperature at 0.35A/mm2 in continuous operation. Lifetime defined as time to 70% of initial intensity. Based on preliminary lifetime test data. Data can be used to model failure rate over typical product lifetime. Note 14. Lumen maintenance vs. time at 0.35A/mm2 in continuous operation, Red junction temperature of 70C, Green junction temperatures of 120C, Blue junction temperatures of 100C. Note 15. Typical spectrum at current density of 0.35 A/mm2 in continuous operation. 16 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Typical Radiation Patterns Typical Polar Radiation Pattern for White Typical Angular Radiation Pattern for White 120% 330 100% 60 Relative Intensity (%) 30 300 80% 60% 40% 20% -120% -100% -80% -60% -40% -20% 0% 20% 40% 60% 80% 100% 0% 120% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement (degrees) Typical Polar Radiation Pattern for Blue and Green -30 30 -30 -60 -120% -100% -80% Typical Polar Radiation Pattern for Red 60 -60% -40% -20% 0% 20% 40% 60% 80% 30 -60 100% 120% -120% -100% -80% 60 -60% -40% -20% 0% 20% 40% 60% 80% 100% 120% Thermal Resistance Typical Thermal Resistance Dome Tj Die Junction Tc Window Frame Tb Ceramic Substrate Aluminum Core Board Ths 17 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved 0.64 C/W Rj-b1 2.02 C/W Rj-hs2 2.15 C/W Note 1: Thermal resistance values are based on FEA model results correlated to measured Rj-hs data. Note 2: Thermal resistance is measured using a SAC305 solder, a Bergquist Al-clad MCPCB, and eGraf 1205 thermal interface material. Heat Sink Ths definition = 3 mm from core-board Rj-c1 Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Mechanical Dimensions - SST-90 Emitter For detailed drawing please refer to DWG-001359 documen 18 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Mechanical Dimensions - SST-90 Star Board 7.0 60 4.0 16.1 SOLDER PADS 19.0 R1.6 TYP 60 1.4 TYP 3.0 TYP 19.9 TYP 7.1 ANODE PADS CATHODE PADS Note 1: Recommended mounting screw: M3 or #4 Note 2: All dimensions in millimeters Note 3: All anode pads on board are interconnected. All cathode pads on board are interconnected 19 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Solder Profile SAC 305 Reflow Profile Window For Low Density Boards 250 Temperature (C) 225 200 175 150 125 100 75 50 25 0 0 30 60 90 120 150 180 Time (sec) 210 240 270 300 Lead free solder guideline for low density boards Solder Profile Stage Profile length, Ambient to Peak Time Maintained Above: Temperature Time Maintained Above: Time Cooldown Rate Cooldown Duration Lead-Free Solder Lead-based Solder 2.75 - 3.5 minutes 2.75 - 3.5 minutes 217 C 183 C 30 - 60 seconds 30 - 60 seconds 4 C/sec 4 C/sec 45 15 sec 45 15 sec Note 1: Temperatures are taken and monitored at the component copper layer. Note 2: Optimum profile may differ due to oven type, circuit board or assembly layout. Note 3: Recommended lead free, no-clean solder: AIM NC254-SAC305. Note 4: Refer to APN-001473 soldering and handling application note for additional solder profiles and details. Note 5: MSL- Level 2A 20 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 (Part SST-90 #) Product Product Datasheet Tape and Reel Drawing ',0(16,216$5(,1PP ,1&+ $ 75$,/(5 PP 32&.(76 2) (037<32&.(76 /($'(5 PP 32&.(76 2)(037<32&.(76 /2$'('32&.(76 3&6 % $ ' & ( '(7$,/$ 6&$/( : ) 815((/,1*',5(&7,21 $ : 7$3(',0(16,216 & % ' ( ) 815((/,1*',5(&7,21 : /($'(5(1' 32&.(76 $ + 21 PDS-001342Rev 09 $ : (c) 2011 Luminus Devices, Inc. - All Rights Reserved % : 5((/',0(16,216 : % + Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Ordering Information Ordering Part Number 1,2 Color SST-90-WDLS-F11-N2150 6500K White 5700K White SST-90-WCLS-F11-GN450 4500K White 4000K White SST-90-WWRM-F11-GM750 3000K White 2700K White SSR-90-WDLS-R11-N2150 6500K White 5700K White SSR-90-WCLS-R11-GN450 4500K White 4000K White SSR-90-WWRM-R11-GM750 3000K White 2700K White Note 1: Description White Big Chip LEDTM SST-90 surface mount device consisting of a 9mm2 LED on ceramic substrate, tray pack SSR-90 evaluation module consisting of a SST-90 surface mount device mounted on an aluminum star board N2150 - denotes a bin kit comprising of all flux and chromaticity bins at the 6500K and 5700K color points GN450 - denotes a bin kit comprising of all flux and chromaticity bins at the 4500K and 4000K color points GM750 - denotes a bin kit comprising of all flux and chromaticity bins at the 3000K and 2700K color points 22 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 SST-90 Product Datasheet Ordering Information Ordering Part Number1,2,3 Color Description SST-90-R-F11-HH100 Red SST-90-G-F11-JG200 Green SST-90-B-F11-KF300 Blue Blue SST-90 consisting of a 9 mm2 LED on a surface mount substrate SSR-90-R-R11-HH100 Red Red SSR-90 evaluation module consisting of a SST-90 surface mount device mounted on an aluminum star board SSR-90-G-R11-JG200 Green SSR-90-B-R11-KF300 Blue Note 1: Red SST-90 consisting of a 9 mm LED on a surface mount substrate 2 Green SST-90 consisting of a 9 mm2 LED on a surface mount substrate Green SSR-90 evaluation module consisting of a SST-90 surface mount device mounted on an aluminum star board Blue SSR-90 evaluation module consisting of a SST-90 surface mount device mounted on an aluminum star board HH100 - denotes a bin kit comprising of all red flux and wavelength bins as specified on page 5 JG200 - denotes a bin kit comprising of all green flux and wavelength bins as specified on page 5 KF300 - denotes a bin kit comprising of all blue flux and wavelength bins as specified on page 5 Note 2: For ordering information on all available bin kits, please see PDS-001692: SST-90 Binning & Labeling document The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices' product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. Big Chip LEDsTM is a registered trademark of Luminus Devices, Inc., all rights reserved. This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and other countries. 23 PDS-001342Rev 09 (c) 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. * T 978.528.8000 * www.luminus.com 1100 Technology Park Drive * Billerica, MA 01821 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Luminus Devices: SST-90-B-F11-KF301 SST-90-G-F11-JF201 SST-90-R-F11-HG101 SST-90-R-F11-HH101