MCC 56 MCD 56 ITRMS = 2x100 A ITAVM = 2x64 A VRRM = 800-1800 V Thyristor Modules Thyristor/Diode Modules TO-240 AA 6 3 2 VRSM VRRM VDSM VDRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 1 Type Version MCC MCC MCC MCC MCC 56-08 56-12 56-14 56-16 56-18 1B io1 B / io1 B / io1 B / io1 B / io1 B / Symbol Conditions ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM TC = 83C; 180 sine TC = 85C; 180 sine ITSM, IFSM TVJ = 45C; VR = 0 i2dt Version io8 B io8 B io8 B io8 B io8 B MCD MCD MCD MCD MCD 1B 56-08 56-12 56-14 56-16 56-18 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1500 1600 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1350 1450 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 11 200 10 750 2 As A2s TVJ = TVJM repetitive, IT = 150 A f =50 Hz, tP = 200 s VD = 2/3 VDRM 150 A/s IG = 0.45 A diG/dt = 0.45 A/s 500 A/s 1000 V/s PGM TVJ = TVJM; IT = ITAVM; tP = 30 s tP = 300 s 10 5 W W PGAV 0.5 W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS; IISOL 1 mA; t = 1 min t=1s Md Mounting torque (M5) Terminal connection torque (M5) Weight Typical including screws 6 7 1 5 4 2 3 1 5 4 2 1 5 2 1 5 2 MCD Version 1 B 3 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 g MCD Version 8 B Features * International standard package, JEDEC TO-240 AA * Direct copper bonded Al2O3 -ceramic base plate * Planar passivated chips * Isolation voltage 3600 V~ * UL registered, E 72873 * Gate-cathode twin pins for version 1B Applications * DC motor control * Softstart AC motor controller * Light, heat and temperature control Advantages * Space and weight savings * Simple mounting with two screws * Improved temperature and power cycling * Reduced protection circuits 419 Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions 6 MCC Version 8 B 3 non repetitive, IT = ITAVM TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) 3 MCC Version 1 B A2s A2s 9100 8830 (dv/dt)cr 5 io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B Maximum Ratings t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 4 8B 100 64 60 TVJ = TVJM VR = 0 (di/dt)cr 8B 7 (c) 2004 IXYS All rights reserved 1-4 http://store.iiic.cc/ MCC 56 MCD 56 Symbol Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT, VF IT /IF = 200 A; TVJ = 25C 1.57 V VT0 rT For power-loss calculations only (TVJ = 125C) 0.85 3.7 V m VGT VD = 6 V; IGT VD = 6 V; 1.5 1.6 100 200 V V mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM 0.2 10 V mA IL TVJ = 25C; tP = 10 s; VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/s 450 mA TVJ TVJ TVJ TVJ = = = = 5 25C -40C 25C -40C V 2: IGT, TVJ = 25C 3: IGT, TVJ = -40C VG 3 2 1 200 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/s 2 s tq TVJ = TVJM; IT = 150 A, tP = 200 s; -di/dt = 10 A/s VR = 100 V; dv/dt = 20 V/s; VD = 2/3 VDRM typ. 150 s QS IRM TVJ = TVJM; IT, IF = 50 A, -di/dt = 3 A/s 100 24 C A RthJC per per per per 0.45 0.225 0.65 0.325 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 5 6 1 4 4: PGAV = 0.5 W 5: PGM = IGD, TVJ = 125C TVJ = 25C; VD = 6 V; RGK = dS dA a 1: IGT, TVJ = 125C mA IH RthJK 10 0.1 100 101 5W 6: PGM = 10 W 102 103 IG mA 104 Fig. 1 Gate trigger characteristics thyristor/diode; DC current module thyristor/diode; DC current module other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration 1000 TVJ = 25C s tgd typ. 100 Limit 10 Optional accessories for module-type MCC 56 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 1 10 mA 100 1000 IG Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") MCC Version 8 B Version 1 or 8 without B in typ designation = without insert in mountig holes MCD Version 8 B 419 MCC / MCD / MDC Version 1 B (c) 2004 IXYS All rights reserved 2-4 http://store.iiic.cc/ MCC 56 MCD 56 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 4 i2dt versus time (1-10 ms) Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus onstate current and ambient temperature (per thyristor or diode) 419 Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature (c) 2004 IXYS All rights reserved 3-4 http://store.iiic.cc/ MCC 56 MCD 56 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: d RthJC (K/W) DC 180 120 60 30 0.45 0.47 0.49 0.505 0.52 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) ti (s) 0.014 0.026 0.41 0.015 0.0095 0.175 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: RthJK (K/W) d DC 180 120 60 30 0.65 0.67 0.69 0.705 0.72 Constants for ZthJK calculation: i Rthi (K/W) ti (s) 0.014 0.026 0.41 0.2 0.015 0.0095 0.175 0.67 419 1 2 3 4 (c) 2004 IXYS All rights reserved 4-4 http://store.iiic.cc/