Switching Power Supply S82J DIN-Rail Mounting Industrial Power Supplies with Capacity Up to 600 W Models range from 10 to 600 W. UL 508 approval. Class 2 approval available for models below 100 W. Universal input or selectable input. Wide range of output voltages: 5 V, 12 V, 15 V, or 24 V. UL, CSA, VDE, and CE Approvals. 3-Year warranty. D D D D D D D Ordering Information J OPEN-FRAME TYPE POWER SUPPLIES Stock Note: Shaded models are normally stocked. Rated input voltage Power ratings 10 W 100 to 240 VAC 25 W 50 W 120 or 240 VAC (automatically selected) 100 W 100 to 240 VAC 120 or 240 VAC (automatically selected) 1 150 W Output Part number Voltage Current Front-mounting bracket DIN-rail mounting bracket 5V 2A S82J-01005A S82J-01005AD 12 V 1A S82J-01012A S82J-01012AD 15 V 0.7 A S82J-01015A S82J-01015AD 24 V 0.5 A S82J-01024A S82J-01024AD 5V 5A S82J-02505A S82J-02505AD 12 V 2.1 A S82J-02512A S82J-02512AD 15 V 1.7 A S82J-02515A S82J-02515AD 24 V 1.1 A S82J-02524A S82J-02524AD 5V 10 A S82J-05005A S82J-05005AD 12 V 4.2 A S82J-05012A S82J-05012AD 24 V 2.1 A S82J-05024A S82J-05024AD 5V 20 A S82J-10005A S82J-10005AD 12 V 8.5 A S82J-10012A S82J-10012AD 15 V 7A S82J-10015A S82J-10015AD 24 V 4.5 A S82J-10024A S82J-10024AD 24 V 6.5 A S82J-15024A S82J-15024AD Switching Power Supply S82J J COVERED-FRAME TYPE POWER SUPPLIES Stock Note: Shaded models are normally stocked. Rated input voltage Power ratings 10 W 100 to 240 VAC 25 W 50 W 120 or 240 VAC (automatically selected) 100 W 100 to 240 VAC 120 or 240 VAC (automatically selected) 150 W Output Part number Voltage Current Front-mounting bracket DIN-rail mounting bracket 5V 2A S82J-01005D S82J-01005DD 12 V 1A S82J-01012D S82J-01012DD 15 V 0.7 A S82J-01015D S82J-01015DD 24 V 0.5 A S82J-01024D S82J-01024DD 5V 5A S82J-02505D S82J-02505DD 12 V 2.1 A S82J-02512D S82J-02512DD 15 V 1.7 A S82J-02515D S82J-02515DD 24 V 1.1 A S82J-02524D S82J-02524DD 5V 10 A S82J-05005D S82J-05005DD 12 V 4.2 A S82J-05012D S82J-05012DD 24 V 2.1 A S82J-05024D S82J-05024DD 5V 20 A S82J-10005D S82J-10005DD 12 V 8.5 A S82J-10012D S82J-10012DD 15 V 7A S82J-10015D S82J-10015DD 24 V 4.5 A S82J-10024D S82J-10024DD 24 V 6.5 A S82J-15024D S82J-15024DD J ENCLOSED-FRAME TYPE POWER SUPPLIES Stock Note: Shaded models are normally stocked. Input voltage 120 or 230 VAC (selectable) Power rating Output Part number Voltage Current 300 W 24 V 14.0 A S82J-30024 600 W 24 V 27.0 A S82J-60024 Note: 1. A mounting bracket is included with each power supply. 2. To order without a mounting bracket (normally included with the 300 W or 600 W), add an "N" at the end of the part number. 3. For other accessories, refer to the Accessories section that follows. Switching Power Supply S82J 2 J ACCESSORIES Stock Note: Shaded models are normally stocked. Description Applicable power supplies Part number Front-mounting bracket for 100-W, 24-V models S82Y-J10F DIN-rail 1 m (3.28 ft) length for 10- to 150-W models PFP-100N/PFP-100N2 0.5 m (1.64 ft) length for 10- to 150-W models PFP-50N for 10-W models S82Y-J01K for 25-W models S82Y-J02K for 50-W models S82Y-J05K for 100-W, 24-V models S82Y-J10K Fan for 600-W models S82Y-JFAN Ferrite ring core (a set of 3 pieces in package) for 300-W and 600-W models S82Y-JC-T Noise filter for 300-W models for 200 to 230 VAC input S82Y-JF3-N for 600-W models for 200 to 230 VAC input S82Y-JF6-N Cover J MODEL NUMBER LEGEND S82J 1 1. Power ratings 010: 10 W 025: 25 W 050: 50 W 100: 100 W 150: 150 W 300: 300 W 600: 600 W 2 3 4 2. Output voltage 05: 5 V 12: 12 V 15: 15 V 24: 24 V 4. Mounting Bracket None: Front-mounting Bracket Type D: DIN-rail Mounting Bracket Type 3 Switching Power Supply S82J 3. Configuration A: Open-frame type, front terminals B: Covered-type, front terminals None: Enclosed-type, front terminals with mounting bracket Specifications 100 to 240 VAC input Item 10 W 25 W 50 W Efficiency (typical) 67% min. (77% min. for 50-W, 24-V models) Input 100 to 240 VAC (85 to 264 VAC) 110 to 170 VDC (set the terminal (L) to + side) (See Note 1.) Voltage Frequency Output (See Note 3.) Additional function 120 or 240 VAC (selected automatically) 120 or 230 VAC (selectable) 100 W (24 V) 100 W (5, 12, 15 V) 150 W 300 W 83% min. 75% min. 82% min. 100 to 240 VAC (85 to 264 VAC) 600 W 120 (85 to 132) or 240 (170 to 264) VAC (selected automatically) 120 (85 to 132) or 230 (170 to 253) VAC (selectable) 50/60 Hz (47 to 450 Hz) Current (See Note 2.) 100 VAC input 0.35 A max. 0.8 A max. 1.4 A max. 2.5 A max. 2.5 A max. 3.5 A max. 8 A max. 14 A max. 200 VAC input 0.3 A max. 0.6 A max. 0.8 A max. 1.15 A max. 1.4 A max. 2.1 A max. 4 A max. 7 A max. Leakage current (See Note 2.) 100 VAC input 0.5mA max. 200 VAC input 1mA max. Inrush current (25_C, cold start) (See Note 2.) 100 VAC input 25 A max. 30 A max. 200 VAC input 50 A max. 60 A max. Noise filter Yes Voltage adjustment range 10% (adjustable with variable resistor (V.ADJ)) Ripple (See Note 2.) 2% (p-p) max. Input variation influence 0.4% max Load variation influence 0.8% max. (with rated input, 10% to 100% load) Temperature variation influence 0.05%/_C max. (with rated input and output) Startup time 500 ms max. (up to 90% of output voltage at rated input and output) Hold time (See Note 2.) 20 ms min. Overload protection 105% to 160% of rated load current, inverted L drop/intermittent operation type, automatic reset 105% min. of rated load current, inverted L drop type, automatic reset (For the 600-W model, the circuit will be shut OFF when the overload exceeds 5s. Protection-ON alarm indicator lit (See Note 5.) Overvoltage protection NO Yes (5-V output models only) (See Note 4.) Overheat protection No Yes (See Note 4.) No 300 ms max. (up to 90% of output voltage at rated input and output) Yes, protection-ON alarm indicator lit (See Note 5.) Yes, protection ON alarm indicator lit (See Note 5.) (This table continues on the next page.) Switching Power Supply S82J 4 Specifications Table - continued from previous page 100 to 240 VAC input Item 10 W Additional function Other 25 W 50 W 100 W (24V) 120 or 240 VAC (selected automatically) 120 or 230 VAC (selectable) 100 W (5, 12, 15 V) 300 W 150 W Protection-ON alarm indicator No Parallel operation No Series operation No Ambient temperature Operating See the derating curve in the Engineering Data Section. Storage -25_C to 65_C (-13_F to 149_F) with no condensation and icing Operating 25% to 85% Storage: 25% to 90% Ambient humidity Dielectric strength 600 W Yes (color, red) Yes, 5 units max. Yes 3.0 k VAC, 50/60 Hz for 1 min (between all inputs and all outputs) 2.2 k VAC, 50/60 Hz for 1 min (between all inputs and GR terminal) 1.0 k VAC, 50/60 Hz for 1 min (between all outputs and GR terminal) Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 5 Insulation resistance 100 MW min. (between all outputs and all inputs/GR terminals at 500 VDC) Vibration resistance 10 to 55 Hz, 0.375-mm double amplitude for 2 h each in X, Y, and Z directions Shock resistance 300 m/s2, 3 times each in X, Y, and Z directions Terminal screw tightening 0.74 N m Output indicator Yes (green) Electromagnetic interference (See Note 2.) Conforms to FCC Class A EMC Emission Enclosure: EN55011 class A Emission AC Mains: EN55011 class A Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2) 8 kV air discharge (level 3) Immunity RF-interference: ENV50140: 10 Vm (80 MHz to 1 GHz) (level 3) Immunity Conducted Disturbance: ENV50141: 10 V (0.5 to 80 MHz) (level 3) Immunity Burst EN61000-4-4 2 kV power-line (level 3) 2 kV output line (level 4) EMC standards Conforms to EN50081-2 and EN50082-2 Conforms to EN50081-2 and EN50082-2 (See Note 6.) With noise filter, confirms to EN50081-1 (See Note 6 and 7.) Approved standards UL UL508 (Listing), 1950, Class 2 (per UL1310) (See Note 8.) UL508 (Listing), 1012, 1950 UL508/1012 CSA CSA C22.2 No. 14, No. 950, Class 2 (See Note 8.) CSA C22.2 No. 14, No. 950 CSA EB1402C VDE EN50178 (VDE0160) and EN60950 Terminal types (only terminal part): VDE0106/P100 1.08 N m Weight (See Note 9.) 250 g max. 350 g max. 400 g max. 500 g max. 1,000 g max 2,000 g max. 2,500 g max. Mean time between failures 135,000 hrs min. (MTBF is calculated according to the probability of accidental device failures, and indicates reliability of devices. It does not necessarily represent a life of the product. Life expectancy 10 yrs. min. (Used at 40_C at the rated input with a 50% load, standard installation). DC inputs are not included in safety standard approvals. At 100% load for rated input voltage (100 VAC or 200 VAC) The output specification is defined at the power supply output terminals. For resetting, turn OFF the power supply, leave for more than one minute, and then turn ON the power supply. For resetting, turn OFF the power supply, leave for more than 90 seconds min. (3 minutes for the 600-W models), and then turn ON the power supply. To ensure the Emission Enclosure rating ferrite ring cores (recommended model: S82Y-JC-T) should be used on all cabling. To ensure the Emission AC Mains rating for EN50081-1 (only for 230 VAC input), a noise filter (recommended models: S82Y-JF3-N for 300-W, S82Y-JF6-N for 600-W) should be used on the input lines. Class 2 approval on 10-W (12, 15, 24 V), 25-W (12, 15, 24 V) and 50-W (24 V) models. The weight indicated is the weight of the open-frame type. (Includes the covers for 300-W and 600-W models) Switching Power Supply S82J Engineering Data J DERATING CURVE S82J 10/25/50/100/150 W Note: 1. The derating curve shown is for standard installation. The derating curve depends on the mounting direction of the Power Supply. 2. Provide a minimum clearance of 20 mm between the Power Supplies. Refer to the Mounting information in the Dimensions section. Open-frame type Covered-type Mounting Position for Standard Installation Natural air cooling Forced-air cooling (1 m3/min) Natural air-cooling Load (%) Load (%) Forced-air cooling (1 m3/min) 55% 55C Ambient temperature (C) Ambient temperature (C) 300-W Model 120 100 Forced-air cooling (1 m3/min) (Standard mounting) 120 Natural air cooling (Standard mounting) Forced-air cooling (1 m3/min) (Side mounting) Natural cooling (Side mounting) Load (%) 100 Load (%) Mounting Position for Standard Installation Parallel Operation Single Operation 20 mm min. 20 mm min. Forced-air cooling (1 m3/min) (Standard mounting) Natural air cooling (Standard mounting) Forced-air cooling (1 m3/min) (Side mounting) 20 mm min. 20 mm min. Natural cooling (Side mounting) Ambient temperature (C) Ambient temperature (C) Switching Power Supply S82J 6 600-W Model Single Operation Mounting Position for Standard Installation Parallel Operation 120 100 100 20 mm min. 20 mm min. Load (%) Load (%) 120 20 mm min. 20 mm min. Ambient temperature (C) Ambient temperature (C) J OVERLOAD PROTECTION 10-W to 100-W (24-V) Models 100-W (5, 12, 15-V), 150-W, 300-W models Rated voltage Rated voltage Output voltage (V) The Power Supply is provided with an overload protection function that protects the load and the power supply from possible damage by overcurrent. When the output current rises above 105% to 160% of the rated output current, the protection function is triggered, decreasing the output voltage. When the output current falls within the rated range, the overload protection function is automatically cleared. Output voltage (V) 10- to 300-W Models Intermittent operation 0 50 100 Output current (%) Output current (%) 600-W Models Rated voltage Output voltage (V) If an excessive current flows for 5 sec or more, the output will be turned off and simultaneously protection-ON alarm indicator will be lit. To reset the S82J, turn off the input voltage, leave the S82J for at least three minutes, and then apply the input voltage again. Note: Do not continue using the S82J with the output terminals short-circuited or the overcurrent condition continued, otherwise the internal elements of the S82J may be damaged or broken. Output current (%) Output shut off after 5 s 7 Switching Power Supply S82J J OVERVOLTAGE PROTECTION 100-W (5, 24 V) Output Models Overvoltage protection operating Output voltage (V) These power supplies have an overvoltage protection function that protects the load and the power supply from possible damage by overvoltage. When the output voltage rises above a set value (120% of the rated output voltage), the protection function is triggered, shutting off the output voltage. If this occurs, reset the power supply by turning it off for 1 minute minimum and then turning it on again. Approx. 20% 10% Rated output voltage -10% Variable range 300- and 600-W Models If a voltage that is 120% of the rated output voltage or above is output, the output voltage will be turned off and simultaneously protection-ON alarm indicator will be lit. To reset the S82J, turn off the input voltage, leave the S82J for at least three minutes if it is a 600-W model or at least 90 seconds if it is a 300-W model, and then apply the input voltage again. Note: The output voltage can be varied by the V. ADJ adjuster on the front panel. When it is set to a value 10% higher than the rated value, the overvoltage protection function may be effected. J OVERHEAT PROTECTION FUNCTION 600-W Model Only If the internal temperature of the S82J rises excessively as a result of fan failure or any other reason, the overheat protection circuit will be triggered to protect the internal elements of the S82J and simultaneously a protection-ON alarm indicator will be lit. To reset the S82J, turn off the input voltage, leave the S82J for at least three minutes, and then apply the input voltage again. J INRUSH CURRENT, START UP TIME, HOLD TIME Input ON Input OFF AC input voltage Inrush current on input application AC input current 90% 96.5% Output voltage Start up time Hold time (20 ms min.) Switching Power Supply S82J 8 Installation J S82J 10 W TO 150 W 300-W Models 5 6 5 1 6 +V AC (L) +V *V +V 1 2 AC (N) 4 *V Side view -V GR GR 3 3 7 AC (L) 2 AC (N) 8 6 5 1 600-W Models 1. DC Output Terminals: Connect the load lines to these terminals. 2. Input Terminals: Connect the input lines to these terminals. 3. Ground Terminal (GR): Connect a ground line to this terminal. 4. Input Voltage Selector Terminals: Short-circuit the terminals if the input is 100 to 120 VAC and open the terminals if the input is 200 to 230 VAC * Only for 300-W and 600-W unit. 5. Output Indicator (DC ON): Lights while a Direct Current (DC) output is ON. 6. Output Voltage Adjuster (V.ADJ): It is possible to increase or decrease the output voltage by 10%. 7. Protection-ON Alarm Indicator: The red indicator will be lit if the overvoltage (for a 300-/600-W model) or overheat protection (for a 600-W model) circuit is triggered. This indicator will also be lit when overcurrent (for a 600-W model) is detected. 8. Parallel/Single Operation Selector: Set the selector to PARALLEL if the Units are in parallel operation. 9 Switching Power Supply S82J 7 Side view -V -V +V +V 8 AC (L) AC (N) GR 4 2 3 Operation J BLOCK DIAGRAMS S82J-010jjjj (10 W) S82J-025jjjj (25 W) AC(L) Fuse* Input Noise filter AC(N) Inrush current Rectifier protection circuit +V DC Output *Fuse capacity: 10 W, 1 A 25 W, 2 A -V Rectifier Drive control circuit Detector Photocoupler S82J-050jjjj (50 W) S82J-10024jj (100 W) Fuse* +V AC(L) Input DC Output Noise filter AC(N) -V Rectifier Inrush current Smoothing protection circuit circuit Rectifier and smoothing circuit *Fuse capacity: 50 W, 3 A, 100 W, 5 A Control circuit Overload detection circuit Overload detection circuit Photocoupler Switching Power Supply S82J 10 S82J-10005jj (100 W) S82J-10012jj (100 W) S82J-10015jj (100 W) S82J-15024jj (150 W) Fuse* +V AC (L) Input DC Output Noise filter AC (N) Inrush current protection circuit *Fuse capacity 100 W: 5 A 150 W: 8 A Rectifier and smoothing circuit Rectifier 100 or 200 V (selected automatically) Control circuit Detector Overcurrent detector Photocoupler Photocoupler Overvoltage detection circuit Overvoltage protection circuit (5 V models only) S82J-30024 (300 W) Fuse 10 A Rectifier and smoothing circuit Noise filter Inrush current protection circuit Rectifier and smoothing circuit 120/230 V (selectable) Control circuit Overcurrent detector Detector Photocoupler Overvoltage detector Photocoupler Parallel operation selector Note: Short-circuit the input voltage selector terminals if the input is 100 to 120 VAC. Keep the terminals open if the input is 200 to 230 VAC. 11 Switching Power Supply S82J -V S82J-60024 (600 W) Fuse 20 A Rectifier and smoothing circuit Noise filter Inrush current protection circuit Rectifier and smoothing circuit 120/230 V (selectable) Fan Control circuit Overcurrent detector Detector Photocoupler Overheat detector Overvoltage detector Photocoupler Parallel operation selector Note: Short-circuit the input voltage selector terminals if the input is 100 to 120 VAC. Keep the terminals open if the input is 200 to 230 VAC. Switching Power Supply S82J 12 J GENERATING OUTPUT VOLTAGE () An output of can be generated by using two power supplies as shown below, because the power supply produces a floating output. +V INPUT -V Load +V Load INPUT -V If operation amplifiers as loads are connected in series, connect a diode between the positive and negative output terminals of each Switching Power Supplies as shown in the illustration below. Without these diodes, the Power Supplies may not start when power is turned on, possibly damaging internal circuits over a period of time. Use Schottky barrier diodes with a low forward voltage (VF). Other types of diodes will not be effective. Guidelines for the dielectric strength and current of the diodes are as follows: Dielectric strength: At least twice the rated output voltage of the Power Supply Forward current: At least twice the rated output current No diodes are required for models that allow series operation. +V INPUT D1 Load -V Load Load +V D2 INPUT -V J SERIES OPERATION Only models with power ratings of 50/100/150/300/600 W allow series operation. As shown in the following diagram, the output voltage from each Switching Power Supply can be added. +V D1 INPUT -V Load +V INPUT -V D2 With the S82J-050jjjj or S82J-10024jj, if the load is shorted a reverse voltage may result in the Power Supply causing deterioration and damage. It is recommended that diodes are connected as shown in the previous diagram (D1, D2). J PARALLEL OPERATION Only 300- and 600-W models can be in parallel operation. Do not operate any other models in parallel. The output of the models in parallel operation is a maximum of 80% of the rated output. +V INPUT Load Set the parallel operation selector to PARALLEL if the Units are in parallel operation and make sure that the thickness and the length of all wires connected to the load are the same to ensure that the wires will have no voltage drop differences. -V +V INPUT -V 13 Switching Power Supply S82J Dimensions Unit: mm (inch) J FRONT-MOUNTING BRACKET TYPES S82J-010jjjj (10 W) Mounting Holes (Surface Screw Mounting) 90 (3.54) 12max. 3.5 Side Mounting 97 (3.82) Two, M3 65 65 (2.56) 5 82 Two, 3.5 dia. 5 M3.5 terminal screw 3.5 dia. 78 6.5 82 (3.23) 3.5 Bottom Mounting 28 17.5 50 15 35 (1.38) Two, M3 Two, M3 For DIN-rail mounting bracket 78 (3.07) S82J-025jjjj (25 W) 124 (4.88) 12max. Mounting Holes (Surface Screw Mounting) 3.5 Side Mounting 97 (3.82) Two, M3 65 65 (2.56) 6 5 116 6.5 Two, 3.5 dia. 3.5 dia. 112 M3.5 terminal screw 116 (4.57) 3.5 Bottom Mounting 28 17.5 21.5 40 (1.57) 83 Two, M3 For DIN-rail mounting bracket Switching Power Supply Two, M3 112 (4.41) S82J 14 Unit: mm (inch) S82J-050jjjj (50 W) 12 max . 161 (6.34) Mounting Holes 3.5 Side Mounting 97 (3.82) Two, M3 65 65 (2.56) 7 5 M3.5 terminal screw 153 153 (6.02) Two, 3.5 dia. 3.5 dia. 6.5 150.5 3.5 Bottom Mounting 20 Two, M3 28 20 Three, M3 for DIN-rail mounting bracket 127 22 40 (1.57) 150.5 (5.93) 10 S82J-10024jj (100 W) 170 (6.69) 12 max. Mounting Holes 4.5 Side Mounting Two, M4 97 (3.82) 65 65 (2.56) 162 5 M3.5 terminal screw 162 (6.38) 7 4.5 dia. Three, M4 Bottom Mounting 160 6.5 4.5 dia. Two, M4 4.5 50 (1.97) 25 27.5 15 15 15 Switching Power Supply S82J 100 28 160 (6.30) S82J-10005jj (100 W) S82J-10012jj (100 W) S82J-10015jj (100 W) S82J-15024jj (150 W) 12 max . Mounting Holes 198 (7.80) 188 (7.40) 4 max. Side Mounting Two, M4 4.5 8.1 89 97 (3.82) 82 (3.23) 9.5 180 (7.09) M4 x 8 4.5 dia. 7 3 180 Bottom Mounting Mounting holes (on both sides) 4.5 dia. 178 4.5 27.5 Three, M4 (6 mm max. deep) 100 Two, M4 3 55 25 50 35 (1.97) 178 (7.01) 15 Mounting Holes S82J-30024 (300 W) 181 (7.13) Eight, M4 holes (depth: 8 max. on both sides) Side Mounting Four, 4.5 dia. 50 (1.97) 50 (1.97) 21 Nine, M4 terminal screws 4 max. 150 (5.91) Bottom Mounting 150 (5.91) Four, M4 holes (depth: 8 max.) Four, 4.5 dia. 92 (3.62) 100 (3.94) Side 100 (3.94) 150 (5.91) 120 (4.72) 150 (5.91) Switching Power Supply S82J 16 Unit: mm (inch) S82J-60024 (600 W) 31 169 (6.65) Eight, M4 holes (depth: 8 max. on both sides) Mounting Holes Side Mounting 50 (1.97) Four, 4.5 dia. 50 (1.97) 150 (5.91) Four, M4 holes (depth: 8 max. on one side) Four, M4 holes (depth: 8 max.) 150 (5.91) Bottom Mounting 170 (6.69) Four, 4.5 dia. Nine, M4 terminal screws 100 (3.94) 100 (3.94) 92 (3.62) 150 (5.91) 45 (1.77) 150 (5.91) 100 (3.94) 34 J MOUNTING BRACKET (INCLUDED WITH POWER SUPPLY UNIT) S82J 10-/25-/50-/100-W (24-V) Models Front-mounting Bracket (Included) 11 1.5 4.6 Using the Mounting Bracket Mounting Holes 15 9 60 Two, 3.5 dia. 74 Attach the mounting bracket to the panel and loosely tighten the two screws. Insert the projected parts of the bracket (b) to the square holes of the power supply (a). Then securely tighten the screws. Two, M3 60 (2.36) 4.6 11 5 20 (b) 20 (0.79) 31.5 (a) Power supply unit 4.7 Mounting bracket 15 20.5 (b) (a) 17 Switching Power Supply S82J S82J 100-W (5-/12-/15-V) Models or 150-W Models Front Mounting Brackets (Included) Mounting with Brackets Mounting bracket 5 20 1.5 120 MAX (4.72) 6 6.5 2.5 2.5 11 110 (4.33) 5 dia. 3 15 6 23.5 17.5 300.5 (1.18) 1.5 Two, 5 dia. 300-W Models 38 Appearance and Mounting Dimensions 10 dia. 145 (5.71) 145 (5.71) 160 (6.30) 92 (3.62) Two, 5 dia. Note: Using the bracket provides 21.6 mm ventilation space. 90 (3.54) 48 (1.89) 32 (1.26) t=1.6 600-W Models 145 (5.71) Note: Using the bracket provides 23.6 mm ventilation space. 140 (5.51) Switching Power Supply S82J 18 J DIN-RAIL MOUNTING BRACKET TYPES S82J-010jjjD (10 W) 35 (1.38) 90 (3.54) 97 (3.82) 100.2 (3.94) S82J-025jjjD (25 W) 40 (1.57) 9 max. when slided out 124 (4.88) 97 (3.82) 134.2 (5.28) 9 max. when slided out S82J-050jjjD (50 W) 40 (1.57) 161 (6.34) 97 (3.82) 171.2 (6.74) 9 max. when slided out S82J-10024jD (100 W, 24-V Output) 50 (1.97) 70 (6.69) 97 (3.82) 180.2 (7.09) 9 max. when slided out 19 Switching Power Supply S82J S82J-10005jD (100 W) S82J-10012jD (100 W) S82J-10015jD (100 W) S82J-15024jD (150 W) 198 (7.80) 188 (7.40) 50 (1.97) 97 (3.82) 198.2 (7.80) 9 max. when slided out Accessories (Order Separately) J DIN RAIL (ORDER SEPARATELY) PFP-100N/PFP-50N PFP-100N2 16 7.3 4.5 4.5 15 25 25 10 25 1,000 (500) (See Note.) 25 10 35 27 35 15 1 25 25 10 15 (5) (See Note.) 25 1,000 25 15 10 27 24 29.2 1 1.5 Note: The values shown in parentheses are for the PFP-50N. J FRONT-MOUNTING BRACKET FOR S82J-10024A AND S82J-10024D (ORDER SEPARATELY) S82Y-J10F Mounting Holes Three, 4.5-dia. holes Three, M4 40 (1.57) 20 (0.79) 50 (1.97) 50 (1.97) 15 (0.59) 15 (0.59) 180 (7.09) Note: The front mounting bracket (above) cannot be used for S82J 100-W (5, 12, 15 V) or 150-W models. Switching Power Supply S82J 20 J COVER (ORDER SEPARATELY) Note: This optional cover is available for the open-frame models also. Item S82Y-J01K S82Y-J02K S82Y-J05K S82Y-J10K Applicable supply unit S82J-010jjjj S82J-025jjjj S82J-050jjjj S82J-10024jj Dimensions 8.5 Attaching Cover to Power Supply A Remove screw (A) before attaching the cover to the Power Supply. Tighten the screw to secure the cover on the Power Supply. 90 Note: The derating curve shown in Engineering Data may change with changes in ambient temperature when the cover is attached to the Power Supply. 96 B 5.6 (A) Dimensions: A 75 mm (2.95) 109 mm (4.29) 146 mm (5.75) 154 mm (6.06) B 35 mm (1.38) 39 mm (1.54) 38 mm (1.50) 48 mm (1.89) J FERRITE RING CORE (ORDER SEPARATELY) S82Y-JC-T 39 (1.54) 34 (1.34) 13 30 J NOISE FILTER (ORDER SEPARATELY) S82Y-JF3-N for 300-W Models for 200 to 230 VAC input S82Y-JF6-N for 600-W Models for 200 to 230 VAC input 16 max. A max. B 16 max. Two, 4.8 dia. (Mounting holes) D 4 39 (1.54) Nameplate 47 (1.85) 4 Six, M4 C 6.5 21 Switching Power Supply 6.5 Model A B C D S82Y-JF3-N 107 (4.21) 75 (2.95) 90 (3.54) 26 (1.02) S82Y-JF6-N 117 (4.60) 85 (3.35) 100 (3.94) 30 (1.18) S82J J MOUNTING METHODS S82J 100 (5, 12, 15 V)/150 W S82J 10/25/50/100 (24 V) W The following mounting methods are available. The following three mounting methods are available. (A) Side mounting (B) Bottom mounting (secured with screws from the inside of the power supply) (C) Bottom mounting (secured with screws from the back of the power supply) (A) Side mounting (B) Bottom mounting (B) (B) (A) (A) (C) Mounting brackets (provided) Metal plate (D) Front mounting Front mounting is possible with the mounting brackets provided. Refer to the Dimensions Section. Switching Power Supply S82J 22 Certain Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all catalogs, manuals or other documents, whether electronic or in writing, relating to the sale of goods or services (collectively, the "Goods") by Omron Electronics LLC and its subsidiary companies ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. Please contact your Omron representative to confirm any additional terms for sales from your Omron company. 2. Prices. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. 4. Orders. Seller will accept no order less than $200 net billing. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Goods. 6. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Goods sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Goods sold hereunder and stop any Goods in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: a. Shipments shall be by a carrier selected by Seller; b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Goods shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Goods shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Goods until the full purchase price is paid by Buyer; d. Delivery and shipping dates are estimates only. e. Seller will package Goods as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. Claims. Any claim by Buyer against Seller for shortage or damage to the Goods occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Goods from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Goods will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period ex- pressed in writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Goods or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Good or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Good; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Goods unless Seller's analysis confirms that the Goods were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any goods by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Goods in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Good on which liability is asserted. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Goods. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Good made to Buyer specifications infringed intellectual property rights of another party. 15. Property; Confidentiality. The intellectual property embodied in the Goods is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Goods are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Goods, and no provision may be changed or waived unless in writing signed by the parties. (d) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (e) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (f) As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability of Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Good in the Buyer's application or use of the Good. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Good. This information by itself is not sufficient for a complete determination of the suitability of the Good in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of this Good, nor is it intended to imply that the uses listed may be suitable for this Good: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii)Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Good. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE 23 Switching Power Supply S82J 2. 3. 4. 5. SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Seller shall not be responsible for the user's programming of a programmable Good, or any consequence thereof. Performance Data. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Seller's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Good may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller's representative at any time to confirm actual specifications of purchased Good. Errors and Omissions. The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. Switching Power Supply S82J 24