W250ACPX-10 - Magnecraft Electric

WEBSITE: www.magnecraft.com - EMAIL:info@magnecraft.com - FAX ON DEMAND 1-800/891-2957 - DOCUMENT 100

PAGE 16

A314 & 250

CLASS

OCTAL STYLE 10 AMP GENERAL PURPOSE RELAY

FEATURES

Plug-in, 8 or 11 pin "Octal Style Base" with see thru plastic dust cover.

Standard SPDT, DPDT or 3PDT contact arrangements. Other contact

arrangements available on special order.

Dielectric Strength to 1500 Vrms.

8 or 11 pin octal style plug-in are standard and Interchangeable with

other general purpose relays of this type.

Available with combinations of Indicator lamps, push to test button and

Blow-out Magnets for DC switching applications.

MANUFACTURED UNDER QUALITY SYSTEM

ISO 9002 & QS 9000

SEE SECTION 10

FOR

MATING SOCKETS

Recognized Component mark for

Canada and the United States.

C US

UL Recognized

File No. E43641

DPDT (+)

(-)

WIRING DIAGRAM

VIEWED FROM PIN END

SPDT

3PDT (+)

(-)

ALL INDICATOR LAMP STYLE RELAY HAVE AN ADDITIONAL LAMP CIRCUIT

INSTALLED ACROSS COIL. OBSERVE COIL POLARITY WHEN L.E.D. INDICA-

TOR IS INSTALLED ACROSS COIL (DC STYLES TYP.).

1.37

(34.79)

1.37

(34.79)

OUTLINE DIMENSIONS

Dimensions are shown in Inch and (Millimeter).

2.25 max.

(57.2)

Artwork marking side

2.81 max.

(71.4)

POLES 120 VAC 240 VAC 28 VDC

12 AMP

1/3 HP

12 AMP

1/3 HP

10 AMP

1/3 HP

12 AMP

1/2 HP

10 AMP

1/2 HP

10 AMP

1/2 HP

10 AMP

SPDT

DPDT

3PDT

CONTACT RATINGS TABLE

PAGE 17

A314 & 250

OCTAL STYLE 10 AMP GENERAL PURPOSE RELAY

SEE SECTION 10

FOR

MATING SOCKETS

80% of nominal voltage or less. for DC coils

85% of nominal voltage or less for AC coils.

10% of nominal voltage or more.

± 10 % measured @ 25 ˚C

125 milliwatts per pole

1.2 Watts for DC coils, 2 VA-2.75VA for AC coils

Capability of DC coils 3.0 Watts max.

Continuous

3/16" silver cadmium oxide, gold flashed Std.

Gold Diffused also available.

50 milliohms maximum initial resistance at rated current

12 V @ 100 Milliamps

15 mS or less at nominal voltage.

10 mS or less at nominal Voltage.

1500 V rms

500 V rms

1500 V rms

1,000 Megohms min. @ 500 VDC

-45˚C to +55˚C (AC), -45˚C to +70˚C (DC)

-45˚C to +105˚C

5 G's,

20 G's

5 G's, 10 Hz to 55 Hz

Plastic dust cover with octal plug.

Molded plastic

Any

8 or 11 pin octal plug-in

3 1/2 ozs. 99.2 g approx.

COIL

Pull-in voltage:

Drop-out:

Coil resistance:

Minimum sensitivity:

Nominal power:

Maximum coil dissipation:

Duty:

CONTACTS

Contact material:

Contact resistance:

Minimum Load:

TIMING

Operate time:

Release time:

DIELECTRIC STRENGTH

Contacts to coil:

Across open contacts:

Pole to pole:

Contacts to frame:

Insulation resistance:

TEMPERATURE

Ambient Temperature (Operating):

Non operating storage:

SHOCK RESISTANCE

Operating:

Non operating:

VIBRATION RESISTANCE

Operating:

MISCELLANEOUS

Enclosure:

Insulation material:

Operating Position:

Terminals:

Weight:

SPECIFICATIONS SERIES A314 & 250 RELAYS

CLASS A314 & 250

8 OR 11 PIN OCTAL PLUG-IN WITH SEE THRU DUST COVER.

Enclosure is a clear high impact plastic (polycarbonate)

dust cover that is screwed to the base to protect against dust,

damage and tampering.

C US

UL Recognized

File No. E43641

Recognized Component mark for

Canada and the United States.

WEBSITE: www.magnecraft.com - EMAIL:info@magnecraft.com - FAX ON DEMAND 1-800/891-2957 - DOCUMENT 100

CLASS

OCTAL STYLE 10 AMP GENERAL PURPOSE RELAY

A314XAX48P-24A

A314XAX48P-120A

A314XBX48P-24A

A314XBX48P-120A

A314XBX48P-240A

A314XCX48P-24A

A314XCX48P-120A

A314XCX48P-240A

A314XBX48PL-24A

A314XBX48PL-120A

A314XBX48PL-240A

A314XCX48PL-24A

A314XCX48PL-120A

A314XCX48PL-24OA

A314XAX48P-12D

A314XAX48P-24D

A314XBX48P-12D

A314XBX48P-24D

A314XCX48P-12D

A314XCX48P-24D

A314XBX48PL-24D

A314XCX48PL-24D

W250ACPX-3

W250ACPX-4

W250ACPX-8

W250ACPX-9

W250ACPX-10

W250ACPX-13

W250ACPX-14

W250ACPX-15

W250ANCPX-26

W250ANCPX-27

W250ANCPX-28

W250ANCPX-29

W250ANCPX-30

W250ANCPX-31

W250CPX-2

W250CPX-3

W250CPX-6

W250CPX-7

W250CPX-10

W250CPX-11

W250NCPX-20

W250NCPX-21

DC OPERATED

AC OPERATED WITH INDICATOR LAMP

AC OPERATED

CONTACT

CONFIGU-

RATION

SPDT

DPDT

3PDT

DPDT

3PDT

SPDT

DPDT

3PDT

DPDT

3PDT

CROSS REFERENCE TO

Measured @ 25˚C

COIL

24 VAC

120VAC

24 VAC

120VAC

240 VAC, 60 Hz

220 VAC, 50 Hz

24 VAC

120 VAC

240 VAC. 60 Hz

220 VAC, 50 Hz

24 VAC

120 VAC

240 VAC. 60 Hz

220 VAC, 50 Hz

24 VAC

120 VAC

240 VAC. 60 Hz

220 VAC, 50 Hz

12 VDC

24 VDC

12VDC

24 VDC

12 VDC

24 VDC

NOMINAL

INPUT

VOLTAGE

NOMINAL

RESIS-

TANCE

120 Ω

472 Ω

120 Ω

472 Ω

120 Ω

472 Ω

NOMINAL

POWER

2.0VA

2.75VA

2.0VA

2.75VA

2.0VA

2.75VA

1.2W

1.2 W

KRPA5AG (or GF) -24

KRPA5AG (or GF) -120

KRPA11AG (or GF) -24

KRPA11AG (or GF) -120

KRPA11AG (or GF) -240

KRPA14AG (or GF) -24

KRPA14AG (or GF) -120

KRPA14AG (or GF) -240

KRPA11AN (or NF) -24

KRPA11AN (or NF) -120

KRPA11AN (or NF) -240

KRPA14AN (or NF) -24

KRPA14AN (or NF) -120

KRPA14AN (or NF) -240

KRPA5DG (or GF) -12

KRPA5DG (or GF) -24

KRPA11DG (or GF) -12

KRPA11DG (or GF) -24

KRPA14DG (or GF) -12

KRPA14DG (or GF) -24

KRPA11DN (or NF) -24

KRPA14DN (or NF) -24

POTTER &

BRUMFIELD *IDEC

RR2P-U-AC24V

RR2P-U-AC120V

RR2P-U-AC240V

RR3PA-U-AC24V

RR3PA-U-AC120V

RR3PA-U-AC240V

RR2P-UL-AC24V

RR2P-UL-AC120V

RR2P-UL-AC240V

RR3PA-UL-AC24V

RR3PA-UL-AC120V

RR3PA-UL-AC240V

RR2P-U-DC12V

RR2P-U-DC24V

RR3PA-U-DC12V

RR3PA-U-DC24V

RR2P-UL-DC24V

RR3PA-UL-DC24V

DC OPERATED WITH INDICATOR LAMP

WEBSITE: www.magnecraft.com - EMAIL:info@magnecraft.com - FAX ON DEMAND 1-800/891-2957 - DOCUMENT 100

PAGE 18

DPDT

A314XBX48P69-24A

A314XBX48P69-120A

A314XBX48P69-12D

A314XBX48P69-24D

A314XBX48P69-110D

DC OPERATED WITH BLOW-OUT MAGNET

120 Ω

472 Ω

10,000 Ω

8 PIN

2.0 VA

1.2 W

24 VAC

120VAC

12 VDC

24 VDC

110 VDC

CONTACT

CONFIGU-

RATION

COIL Measured @ 25˚C

NOMINAL

INPUT

VOLTAGE NOMINAL

POWER

NOMINAL

RESISTANCE

(OHMS)

NO. OF PINS

OCTAL

STYLE

AC OPERATED WITH BLOW-OUT MAGNET

DUAL MARKED PART NUMBERS

SERIES A314 CLASS 250CP

Struthers-Dunn

PART NUMBERS SHOWN ALSO AVAILABLE THRU STOCKING DISTRIBUTION

*F = GOLD FLASHED

POLES 120 VAC 240 VAC 30 VDC

12 AMP

1/3 HP 10 AMP

1/2 HP 10 AMP

DPDT

150 VDC

CONTACT RATINGS WITH BLOW-OUT MAGNET

3 AMP

RELAYS FOR DC SWITCHING

RELAYS USING MAGNETIC BLOW-OUT MAGNETS ARE NOT AGENCY APPROVED.

PART

NUMBERS

A314 & 250

CLASS

RELAYS CAN BE ORDERED EITHER BY MAGNECRAFT OR STRUTHERS-DUNN PART NUMBERS LISTED BELOW

Struthers-Dunn

PAGE 19

WEBSITE: www.magnecraft.com - EMAIL:info@magnecraft.com - FAX ON DEMAND 1-800/891-2957 - DOCUMENT 100

1.50

(38.1)

1.31

(33.3)

0.218

(5.53)

1.87

(47.4)

0.28

(7.11)

1.93

(49.0)

MANUAL PUSH

BUTTON

ACTUATOR (OPTIONAL)

0.187 Typ.

(4.74)

0.020 Typ.

(.508)

ORDERING CODE

Typical Type No.

Series

284 3 way terminals

10 Amp, 4 pole

Contact Arrangements

XDX (4PDT)

Construction Style

Open, with tapped 6-32 hole - NO CODE

Open, with 6-32 Stud - CODE S

Enclosed, 3 way terminals - CODE C

Options

10 Amp contacts Standard - NO CODE

Gold diffused contacts - CODE G

Indicator Lamp - CODE L

Manual Actuator - CODE M

Printed Circuit Terminals - CODE T

5 Amp contacts (Silver) - CODE Y

Coil Voltage

AC: 6, 12, 24, 48, 120, 240 (Add "A")

DC: 6, 12, 24, 48, 115, 125 (Add "D")

284 XDX C GLM -240A

Struthers-Dunn

WIRING DIAGRAM

(VIEWED FROM TERMINAL END)

SEE NEXT PAGE FOR RATINGS & SPECIFICATIONS

OUTLINE DIMENSIONS

Dimensions shown are in INCHES and (millimeters)

SERIES

The series 284 relay is a extension of the Class 388/283

style relay except it provides for 4PDT contacts, any

one set of contacts capable of switching 10 Amps (total

load of 30 Amps at 120 VAC and 20 Amps at 240 VAC).

This relay has the 3 way terminal design for greater flexibility

in making connections. The 0.187 Spade terminals can be

soldered, plugged into sockets or connected using 3/16"

Q.C. Female connectors.

UL Recognized

File No. E13224

284

GENERAL PURPOSE 4 POLE 10 AMP PLUG-IN RELAY

CONTACT RATINGS

LOAD

Resistive Motor

Load 80% pF.

30VDC 120VAC 240VAC

10A 10A

1/3Hp 10A

1/2Hp

Maximum total load for 4 pole relay is 30 Amps @

120VAC, 20Amps @ 240VAC

UL Recognized

File No. E13224

GENERAL SPECIFICATIONS

NOTE: * For 220-250VDC coils use a 8,200 Ω, 5 Watt resistor in series with

110-125 VDC relays

Nominal

Voltage Resistance

Ohms ± 10% Resistance

Ohms ± 10% Current (MA)

120AC or

115-125DC

240AC*

870

4700

560

230

115

200

100

13-15

3.4VA

1.2W

AC DC AC DC AC DC

120

480

1920

8200

Power

Consumption

COIL

Pull-in Voltage:

Dropout Voltage:

Max. allowed voltage:

Coil Resistance:

CONTACTS

Contact Material:

TIMING

Operate Time:

Release Time:

DIELECTRIC STRENGTH

All Mutually Insulated Points:

Insulation Resistance:

TEMPERATURE

Temperature Rating:

LIFE EXPECTANCY

Mechanical:

Electrical:

MISCELLANEOUS

Enclosure:

Weight:

COIL SPECIFICATIONS @ 25˚C

AC: 85%, DC: 75% of nominal voltage

measured at 25˚C

10% of nominal voltage or more @ 25˚C

110% of nominal voltage

±10% Measured @ 25˚C

Silver Cadmium Oxide.

15 mS Max. @ Nominal Voltage.

10 mS Max. @ Nominal Voltage.

500 V rms across open contacts

1500 V rms between current carrying

parts

1000 Megohms.min. @ 500 VDC

AC: -45˚C to +50˚C @ Rated Operation.

(+65˚C for open style)

DC: -45˚C to +70 ˚C

+85˚C for open style)

10 Million Operations no load

100,000 Operations @ Rated Load.

Clear polycarbonate

5.0 oz. approx..

SERIES

284

GENERAL PURPOSE 4 POLE 10 AMP PLUG-IN RELAY

PAGE 20

WEBSITE: www.magnecraft.com - EMAIL:info@magnecraft.com - FAX ON DEMAND 1-800/891-2957 - DOCUMENT 100

PAGE 21

WEBSITE: www.magnecraft.com - EMAIL:info@magnecraft.com - FAX ON DEMAND 1-800/891-2957 - DOCUMENT 100

GENERAL SPECIFICATIONS

* RELEVANT IEC CONTACT UTILIZATION CATEGORIES

AC-1, AC-3, DC-1, AC-15

(SEE SECTION 11 FOR RELEVANT UTILIZATION CATEGORIES.)

SEE SECTION 10 FOR MATING SOCKETS

The Class 388 & 283 general purpose relays are available in

a wide choice of AC or DC voltages with Indicator Lamp, Push to test

button and other options. Plug-in style relays have 3-way pierced

terminals. While spaced for standard plug-in Socket mounting.

The flat terminals (0.187 x 0.020) also accept quick connect

receptacles or direct soldering.

MANUFACTURED UNDER

QUALITY SYSTEM

ISO 9002 & QS 9000 COMPLIES WITH

REQUIREMENTS OF

IEC STANDARDS

947-4-1 AND 947-5-1

LOW VOLTAGE DIRECTIVE

IEC = INTERNATIONAL

ELECTROTECHNICAL COMMISSION

FLANGE MOUNT

NEW!NEW!

NEW!

TOP FLANGE MOUNT

P.C. MOUNT

PLUG-IN

POLES 120 VAC 240 VAC 28 VDC

13 AMP

1/3 HP

13 AMP

1/3 HP

13 AMP

1/3 HP

13 AMP

1/2 HP

12 AMP

1/2 HP

11 AMP

1/2 HP

13 AMP

12 AMP

11 AMP

1 POLE

2 POLE

3 POLE

3PDT

DPDT

SPDT

POLES

125

18.0

30.0

250

20.0

28.0

MIN. OPERATE

(SENSITIVITY)

OPERATE TIME

(Milliseconds

maximum.)

RELEASE TIME

(Milliseconds

Maximum.)

375

24.0

26.0

DPDT

Viewed from terminal end

WIRING DIAGRAMS

SPDT

3PDT

CONTACT RATINGS TABLE TYPICAL OPERATING CHARACTERISTICS

(For DC Voltage types only).

C L A S S

Recognized Component mark for

Canada and the United States.

C US

UL Recognized

File No. E43641

388 & A283

SEE SECTION 10 FOR MATING SOCKETS

GENERAL SPECIFICATIONS

PAGE 22

WEBSITE: www.magnecraft.com - EMAIL:info@magnecraft.com - FAX ON DEMAND 1-800/891-2957 - DOCUMENT 100

C L A S S

SPECIFICATIONS CLASS 388 & 283 RELAYS

COIL

Pull-in voltage:

Dropout voltage:

Resistance:

Coil power

Insulation System:

Maximum coil dissipation:

Duty:

CONTACTS

Contact material:

Contact resistance:

DIELECTRIC STRENGTH

Contacts to coil:

Across open contacts:

Pole to pole

Contacts to frame:

Insulation resistance:

TEMPERATURE

Operating:

Storage

LIFE EXPECTANCY

Electrical:

Mechanical:

MISCELLANEOUS

Operating Position:

Insulation material:

Enclosure:

Terminals:

Weight:

80% of nominal voltage or less. for DC coils.

85% of nominal voltage or less for AC coils.

10% of nominal voltage or more.

± 10 % Measured at 25˚C

1.2 Watts for DC coils, 2 VA to 2.75 VA for AC coils

Class "B" (130˚C per UL std. 1446)

Capability of DC coils 3.0 Watts max.

Continuous

3/16" silver cadmium oxide, gold flashed.

50 Milliohms maximum initial resistance

at rated current

2000 V rms

500 V rms

2000 V rms

1000 Megohms @ 500 VDC

-30˚C to +50˚C (AC), -30˚C to +65˚C (DC)

-30˚C to 100˚C

100,000 Operations @ rated AC load

5,000,000 Operations @ No load

Any

Molded plastic

Clear Polycarbonate dust cover

3/16" solder/plug-in, Printed Circuit terminals

other terminals available: .205 x .032, .250 x .032

on special order. Consult Factory.

3.1 oz.. (88 g approx. with cover).

OPTIONAL

TOP FLANGE COVER

IS AVAILABLE ON

SPECIAL ORDER.

CONSULT FACTORY.

1.90Max.

(48.4)

1.40Max.

(35.5)

2.53

(64.29)

1.41

(35.8)

.500

(12.7)

388 & A283