1 2 3 5 4 6 7 8 Global Connector Technology Ltd. - BD095: 1.27mm PITCH PIN HEADER, DUAL ROW, SURFACE MOUNT, VERTICAL A A B B C C D D E E SPECIFICATIONS : Ordering Grid CURRENT RATING 1 AMP XXXX XXXX XXXX X X BD095 XX X X X INSULATOR RESISTANCE 1000 MEGOHMS MIN. DIELECTRIC WITHSTANDING AC 300 V Packing Options No. of Contacts CONTACT RESISTANCE 20m Max. B = Tape and Reel with Cap (Standard) 06 to 66 OPERATING TEMPERATURE -40C TO +105C D = Tube F CONTACT MATERIAL COPPER ALLOY E = Tube with Cap Insulator Material INSULATOR MATERIAL : Locating Peg L = LCP (Insulator H = A, B, L, F) OPTIONS : POLYESTER , 0 = No Peg Contact Plating N = Nylon 6T (Insulator H = K) LCP, UL 94-V0 (INSULATOR HEIGHT/ H = A, B, L, F) 1 = With Peg A = Gold Flash All Over OPTIONS : POLYAMIDE , B = Selective Gold Flash Contact Area/ Dimension F (1/100mm) Insulator Height "H" NYLON 6T, UL 94-V0 (INSULATOR HEIGHT/ H = K) Tin On Tail (Width of Footprint) Dimension E (1/100mm) K = 1.00mm SOLDERING PROCESS : C = Tin All Over Standard - 5.70mm = 0570 (PCB to Insulator) Dimension D (1/100mm) A = 1.50mm LCP (OPTION ) G = 10" Gold Contact Area/Tin On Tail or specify Dimension F Standard - 0.70mm = 0070 (Post Height) B = 2.00mm IR REFLOW : 260C for 10 sec. I = 30" Gold Contact Area/Tin On Tail e.g. 2.50mm = 0250 Minimum 0.70mm = 0070 G Standard 2.00mm = 0200 L = 2.50mm WAVE : 250C for 5-10 sec Standard = Gold Flash All Over Tol +/- 0.2mm or specify Dimension E Standard 3.50mm = 0350 F = 3.00mm MANUAL SOLDER : 350C for 3-5 sec e.g. 2.50mm = 0250 or specify Dimension D Standard = 1.50mm NYLON 6T (OPTION ) Tol +/- 0.2mm e.g. 2.50mm = 0250 IR REFLOW : 260C for 10 sec. Tol +/- 0.2mm WAVE : 230C for 5-10 sec. MANUAL SOLDER : 350C for 3-5sec Tolerances MATES WITH (SUBJECT TO PIN LENGTH ): Part Number:Date:(Except as noted) BD050 BD055 BD060 BD064 BD065 28 DEC 07 Dimensions in mm BD095 BD067 BD091 H X. 0.30 By DETAIL REV DATE LYH DRAWING RELEASE A 28/12/07 1 PN CB AMENDMENT TO SPEC & PACKING OPTIONS CHANGED NO. OF CONTACTS AMENDED & PACKING OPTIONS CHANGED B 27/04/09 C 20/05/09 AE AE SOLDER TEMP & MATES WITH INFO. UPDATED AMENDMENT TO STANDARD DIMENSIONS D 27/07/09 E 07/08/09 F 08/12/09 2 X.X 0.20 X.XX 0.15 SA INSULATOR MATERIAL UPDATED FOR SPECIFIC INSULATOR HEIGHTS 3 X.XXX 0.10 X.5 .X2 .XX1 .XXX0.5 Third Angle Projection 4 5 1.27mm PITCH PIN HEADER, DUAL ROW, SURFACE MOUNT, VERTICAL C 6 G GC Description:- THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE COPIED OR DISCLOSED WITHOUT WRITTEN CONSENT F H www.globalconnectortechnology.com Scale Revision Material Drawn by NTS F See Note LYH 7 Sheet No. E & OE 8 1/1