Round Water-resistant Connectors (M12) XS5 Water-resistant Smartclick Connectors That Reduce Installation Work * New - IDC Field-wiring versions of the XS5G and XS5C. * A newly developed lock structure that maintains compatibility with screw-type M12 connectors. * Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock. * A positive click indicates locking. * Features the same degree of protection (IP67) as conventional, screw-type M12 connectors. * Connector with cable are UL approved TM Specifications Rated current Rated voltage Contact resistance (connector) Insulation resistance Dielectric strength (connector) Degree of protection Insertion tolerance Lock strength Cable holding strength Lock operating force Ambient operating temperature range Number of pressure-weld repairs (See note 1) 4A 250 VDC 40 m max. (20 mV max., 100 mA max.) 1,000 M min. (at 500 VDC) 1,500 VAC for 1 min. (leakage current: 1 mA max.) IP67 (IEC60529) 50 times min. Tensile: 100 N/15 s, Torsion: 1 N*m/15 s Tensile: 100 N/15 s, Torsion: 1 N*m/15 s (for cable diameter of 6 mm) (See note 2) 0.1 N*m to 0.25 N*m -25C to 70C 10 times max. (Limited to the same external diameter and wire diameter.) Note: 1. Only XS5C/G (IDC models) 2. Refer to product specifications for details. Recommended Cables Cable outer diameter (mm) 8 mm 7 mm 6 mm 4 mm 3 mm 7 to 8 mm 6 to 8 mm 5 to 6 mm 4 to 5 mm 3 to 4 mm Crimping models -- Two types of connectors are available: 0.18 to 0.3mm2 0.5 to 0.75mm2 Core sizes Screw-on models Soldering models IDC Models 0.14 to 0.75 mm2 -- 0.18 to 0.75mm2 2 0.5 mm max. * * * * Minimum Wire Diameter: 0.08mm Outer diameter of wire covering: 0.7 to 2.6 mm Sheath material: PVC, PE, PUR Material of wire covering: PVC, PE Connection Combinations OMRON model No. Smartclick Plug Connectors M12 Plug Connectors XS5H, XS5G, XS5M XS5W (plug side) XS5R (plug side) XS2H, XS2G, XS2M XS2W (plug side) XS2R (plug side) Smartclick Socket Connectors XS5F, XS5C, XS5P XS5W (socket side) XS5R, (socket side) M12 Socket Connectors XS2F, XS2C, XS2P XS2W (socket side) XS2R (socket side) Note: TM is a registered trademark of the OMRON Corporation. : Connected by SmartclickTM twisting. : Connected by screwing. Round Water-resistant Connectors (M12) XS5 123 Materials and Finish Item Model XS5R XS5M/P XS5C/G (Crimping, Soldering) bronze Phosphor bronze Phosphor bronze Phosphor or Brass Materials Contacts Finish Brass XS5C/G (Screw-on) Phosphor bronze or Brass XS5C/G (IDC models) Phosphor bronze Nickel base, 0.15-m gold-plating Nickel base, 0.4-m gold-plating Fixtures Fixtures (Lock) (See note 3) Pin Block O-ring Overmolding/Cover Nickel-plated zinc alloy SUS PBT resin (UL94V-0) Rubber Fire-retardant, robot cable Cable XS5F/H/W Oil-resistant polyurethane cable Soft PBT resin (UL94V-0) UL AWM2464 CL3, 6-mm dia., 4 cores x AWG20 (0.08/110) -- PBT resin(UL94V-0) -- 6 dia.4 cores x 0.5 mm2 (0.12/45) Seal Resin -- Power supply wires -- -- Epoxy Resin (UL94V-0) UL 1007 AWG20 Note: 1. See "XS5/XS2 - Assembly Tooling and Accessories" datasheet for information regarding assembly, tooling and accessories that are common to the XS5 and XS2 connectors -- -- 2. See "XS2" datasheet for specifics regarding those connectors 3. Only plug 4-Pin Connectors with Cable Attached XS5F - Socket on One Cable End XS5F-D42@-@80-F Fire-retardant, Robot Cable XS5F-D42@-@80-P Oil-resistant Polyurethane Cable TM Dimensions (Unit: mm) Straight L (Cable length) 40.7 6 dia. 14.9 dia. Wiring Diagram for 4 Cores M12 30 5 Terminal No. 50 1 2 3 4 Angled L (Cable length) 25.3 6 dia. 28.3 30 Cable Color of core sheath Brown White Blue Black 5 50 Note: The overmolding on the Oil-resistant Polyurethane Cable (XS5F-D42@-@80-P)is black, and the overmolding on the Fire-retardant, Robot Cable (XS5F-D42@-@80-F) is warm gray. Ordering Information Cable type Fire-retardant, robot cable Oil-resistant polyurethane cable Cable length L (m) 1 2 3 5 10 2 5 10 Model Straight XS5F-D421-C80-F XS5F-D421-D80-F XS5F-D421-E80-F XS5F-D421-G80-F XS5F-D421-J80-F XS5F-D421-D80-P XS5F-D421-G80-P XS5F-D421-J80-P Note: 1. Ask your OMRON representative about other specifications. 124 Round Water-resistant Connectors (M12) XS5 Angled XS5F-D422-C80-F XS5F-D422-D80-F XS5F-D422-E80-F XS5F-D422-G80-F XS5F-D422-J80-F XS5F-D422-D80-P XS5F-D422-G80-P XS5F-D422-J80-P Standard pack quantity 10 5 1 5 1 2. XS5F-D42@ models with -F are cRUus approved. Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS5F - D42@ - @80 - @ 1 2 34 5 6 78 9 1. Type F: Connector connected to cable, socket on one cable end 2. AC/DC (Mating Section Form) D: DC 3. Connector Poles 4: 4 poles 4. Contact Plating 2: 0.4-m gold plating 5. Cable Connection Direction 1: Straight 2: Angled 6. Cable Length A: 0.3 m G: 5 m B: 0.5 m H: 7 m C: 1m J: 10 m D: 2m K: 15 m E: 3m L: 20 m F: 4m 7. Connections 8: A Brown, B White, C Blue, D Black (Numbers inside circles are terminal numbers.) 8. Connectors on One End/Both Ends 0: One end 9. Cable Specification F: Fire-retardant, robot cable P: Oil-resistant polyurethane cable Round Water-resistant Connectors (M12) XS5 125 XS5H - Plug on One Cable End XS5H-D42@-@80-F Fire-retardant, Robot Cable XS5H-D42@-@80-P Oil-resistant Polyurethane Cable TM Dimensions (Unit: mm) Straight L (Cable length) 44.7 6 dia. 30 5 Wiring Diagram for 4 Cores 50 Angled Terminal No. 1 2 3 4 L (Cable length) 25.3 6 dia. 32.3 30 Cable Color of core sheath Brown White Blue Black 5 50 M12 Note: The overmolding on the Oil-resistant Polyurethane Cable (XS5H-D42@-@80-P) is black, and the overmolding of the Fire-retardant, Robot Cable (XS5H-D42@-@81-F) is warm gray Ordering Information Cable type Fire-retardant, robot cable Oil-resistant polyurethane cable Cable length L (m) 0.3 1 2 5 0.3 2 5 Model Straight XS5H-D421-A80-F XS5H-D421-C80-F XS5H-D421-D80-F XS5H-D421-G80-F XS5H-D421-A80-P XS5H-D421-D80-P XS5H-D421-G80-P Note: 1. Ask your OMRON representative about other specifications. 2. XS5H-D42@ models with -F are cRUus approved. 126 Round Water-resistant Connectors (M12) XS5 Angled XS5H-D422-A80-F XS5H-D422-C80-F XS5H-D422-D80-F XS5H-D422-G80-F XS5H-D422-A80-P XS5H-D422-D80-P XS5H-D422-G80-P Standard pack quantity 10 5 10 5 Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS5H - D42@ - @80 - @ 1 2 34 5 6 78 9 1. Type H: Connector connected to cable, plug on one cable end 2. AC/DC (Mating Section Form) D: DC 3. Connector Poles 4: 4 poles 4. Contact Plating 2: 0.4-m gold plating 5. Cable Connection Direction 1: Straight 2: Angled 6. Cable Length A: 0.3 m G: 5 m B: 0.5 m H: 7 m C: 1m J: 10 m D: 2m K: 15 m E: 3m L: 20 m F: 4m 7. Connections 8: A Brown, B White, C Blue, D Black (Numbers inside circles are terminal numbers) 8. Connectors on One End/Both Ends 0: One end 9. Cable Specifications F: Fire-retardant, robot cable P: Oil-resistant polyurethane cable Round Water-resistant Connectors (M12) XS5 127 XS5W - Socket and Plug on Cable Ends XS5W-D42@-@81-F Fire-retardant, Robot Cable XS5W-D42@-@81-P Oil-resistant Polyurethane Cable TM Dimensions (Unit: mm) Straight/straight M12 M12 14.9 dia. 14.9 dia. 40.7 6 dia. 44.7 L (Cable length) Angled/angled M12 32.3 6 dia. 28.3 Wiring Diagram for 4 Cores Terminal No. L (Cable length) Straight/angled 1 2 3 4 M12 Cable color of core sheath 1 Brown 2 White 3 Blue 4 Black 32.3 6 dia. 40.7 L (Cable length) Angled/straight 28.3 M12 6 dia. 44.7 L (Cable length) Note: The overmolding on the Oil-resistant Polyerethane Cable (XS5W-D42@-@81-P ) is black, and the overmolding of the Fire-retardant, Robot Cable (XS5W-D42@-@81-F) is warm gray. 128 Round Water-resistant Connectors (M12) XS5 Ordering Information Cable type Cable length L (m) 1 2 3 5 10 2 5 10 Fire-retardant, robot cable Oil-resistant polyurethane cable Cable type Cable length L (m) Fire-retardant robot cable 2 5 Model Straight/straight XS5W-D421-C81-F XS5W-D421-D81-F XS5W-D421-E81-F XS5W-D421-G81-F XS5W-D421-J81-F XS5W-D421-D81-P XS5W-D421-G81-P XS5W-D421-J81-P Angled/angled -- XS5W-D422-D81-F -- XS5W-D422-G81-F -- -- -- -- Model Straight/angled XS5W-D423-D81-F XS5W-D423-G81-F Angled/straight XS5W-D424-D81-F XS5W-D424-G81-F Standard pack quantity 10 5 1 5 1 Standard pack quantity 5 Note: 1. Ask your OMRON representative about other specifications. 2. XS5W-D42@ models with -F are cRUus approved. Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS5W - D42@ - @81 - @ 1 2 34 5 6 78 9 1. Type Connectors connected to cable, socket and plug on cable ends W: 2. AC/DC (Mating Section Form) D: DC 3. Connector Poles 4: 4 poles 4. Contact Plating 2: 0.4-m gold plating 5. Cable Connection Directions 1: Straight/straight 2: Angled/angled 3: Straight (XS5F)/angled (XS5H) 4: Angled (XS5F)/straight (XS5H) 6. Cable Length A: 0.3 m G: 5 m B: 0.5 m H: 7 m C: 1m J: 10 m D: 2m K: 15 m E: 3m L: 20 m F: 4m 7. Connections 8: A Brown, B White, C Blue, D Black (Numbers inside circles are terminal numbers.) 8. Connectors on One End/Both Ends 1: Both ends 9. Cable Specifications F: Fire-retardant, robot cable P: Oil-resistant polyurethane cable Round Water-resistant Connectors (M12) XS5 129 4-Pin and 5-Pin Assembly Connector XS5C Sockets TM Dimensions (Unit: mm) XS5C-D418 (IDC Model) Straight Connectors 62.4 54.4 M12 17.5 dia. 14.9 dia. XS5C-D4C@ (Crimping Model) XS5C-D42@ (Soldering Model) Straight Connectors XS5C-D4C@ (Soldering Model) XS5C-D42@ (Soldering Model) Angled Connectors M12 14.9 dia. 14.2 dia. 14.9 dia. 23 43.4 XS5C-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 7 or 8mm) Straight Connectors 54.9 20 dia. 14.9 dia. 16 dia. XS5C-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 3, 4, or 6mm) Straight Connectors 54.9 20 dia. 14.9 dia. XS5C-D@S@ (Screw-on Connectors) Angled Connectors 14 dia. 35.9 20 dia. 14.9 dia. 39.6 14 dia. 130 31.8 M12 Round Water-resistant Connectors (M12) XS5 Ordering Information No. of Poles Connection Method Suitable cable dia. (mm) IDC 3 to 8 mm 6 mm (5 to 6) 4 mm (4 to 5) 3 mm (3 to 4) 6 mm (5 to 6) 4 mm (4 to 5) 3 mm (3 to 4) 6 mm (5 to 6) 4 mm (4 to 5) 3 mm (3 to 4) 8 mm (7 to 8) 7 mm (6 to 7) 6 mm (5 to 6) 4 mm (4 to 5) 3 mm (3 to 4) 8 mm (7 to 8) 7 mm (6 to 7) Crimping Soldering 4 Screw-on 5 Screw-on Model Straight XS5C-D418 XS5C-D4C1 XS5C-D4C3 XS5C-D4C5 XS5C-D421 XS5C-D423 XS5C-D425 XS5C-D4S1 XS5C-D4S3 XS5C-D4S5 XS5C-D4S7 XS5C-D4S9 XS5C-D5S1 XS5C-D5S3 XS5C-D5S5 XS5C-D5S7 XS5C-D5S9 Standard pack quantity Angled -- XS5C-D4C2 XS5C-D4C4 XS5C-D4C6 XS5C-D422 XS5C-D424 XS5C-D426 XS5C-D4S2 XS5C-D4S4 XS5C-D4S6 -- -- -- -- -- -- -- 1 Note: 4 pole XS5C models are cRUus approved. IDC version (XS5C-D418) is pending approval. XS5U (Crimping pin for XS5C) Dimensions (Unit: mm) XS5U-222@ Socket Pin Dimensions Slit 1.5 B A Dimension (mm) A B C No. of slits to 0.3 XS5U-2221 (220.18 to 24 AWG) 16.7 6.1 0.8 1 to 0.7 XS5U-2222 (180.5 to 20 AWG) 16.8 6.2 1.3 0 C dia. 2 dia. 2.3 dia. Model Suitable core size (mm2) Note: 1. A special tool must be used for crimping. For details, refer to the "XS5/XS2 - Assembly Tooling and Accessories" datasheet. 2. AWG size is based on UL1007 wire. Ordering Information Suitable core size (mm2) Model Standard Pack Quantity 0.18 to 0.3 0.5 to 0.75 XS5U-2221 XS5U-2222 100 Round Water-resistant Connectors (M12) XS5 131 XS5G - Plugs TM Dimensions (Unit: mm) XS5G-D418 (IDC Model) Straight Connectors 66 M12 58 17.5 dia. 14.9 dia. XS5G-D4C@ (Crimping Model) XS5G-D42@ (Soldering Model) Straight Connectors XS5G-D42@ (Soldering Model) Angled Connectors M12 37.7 M12 14.9 dia. 14.9 dia. 14.2 dia. 23 49.3 XS5G-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 7 or 8mm) Straight Connectors 58.7 20 dia. 14.9 dia. 16 dia. XS5G-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 3, 4, or 6mm) Straight Connectors 58.7 20 dia. 14.9 dia. XS5G-D@S@ (Screw-on Connectors) Angled Connectors 14 dia. 39.7 20 dia. 39.6 14 dia. 132 Round Water-resistant Connectors (M12) XS5 Ordering Information No. of Poles Connection Method Suitable cable dia. (mm) IDC 3 to 8 mm 6 mm (5 to 6) 4 mm (4 to 5) 3 mm (3 to 4) 6 mm (5 to 6) 4 mm (4 to 5) 3 mm (3 to 4) 6 mm (5 to 6) 4 mm (4 to 5) 3 mm (3 to 4) 8 mm (7 to 8) 7 mm (6 to 7) 6 mm (5 to 6) 4 mm (4 to 5) 3 mm (3 to 4) 8 mm (7 to 8) 7 mm (6 to 7) Crimping Soldering 4 Screw-on 5 Screw-on Model Straight XS5G-D418 XS5G-D4C1 XS5G-D4C3 XS5G-D4C5 XS5G-D421 XS5G-D423 XS5G-D425 XS5G-D4S1 XS5G-D4S3 XS5G-D4S5 XS5G-D4S7 XS5G-D4S9 XS5G-D5S1 XS5G-D5S3 XS5G-D5S5 XS5G-D5S7 XS5G-D5S9 Standard pack quantity Angled -- -- -- -- XS5G-D422 XS5G-D424 XS5G-D426 XS5G-D4S2 XS5G-D4S4 XS5G-D4S6 -- -- -- -- -- -- -- 1 Note: 1. XS5G Screw-on Plugs cannot be connected side-by-side to the CN1 and CN2 connectors of XS2R or XS5R Y-Joint Sockets / Plugs 2. 4 pole XS5G models are cRUus approved. IDC version (XS5G-D418) is pending approval. XS5U (Crimping pin for XS5G) Dimensions (Unit: mm) XS5U-312@ Plug Pin Dimensions Slit 1 dia. 1.5 B A Dimension (mm) A B C No. of slits to 0.3 XS5U-3121 (220.18 to 24 AWG) 22.6 6.1 0.8 1 to 0.7 XS5U-3122 (180.5 to 20 AWG) 22.7 6.2 1.3 0 2 dia. 2.3 dia. C dia. Model Suitable core size (mm2) Note: 1. A special tool must be used for crimping. For details, refer to the "XS5/XS2 - Assembly Tooling and Accessories" datasheet. 2. AWG size is based on UL1007 wire. Ordering Information Suitable core size (mm2) Model Standard Pack Quantity 0.18 to 0.3 0.5 to 0.75 XS5U-3121 XS5U-3122 100 Round Water-resistant Connectors (M12) XS5 133 4-Pin Y-Joint Plug/Socket Connectors XS5R TM Dimensions (Unit: mm) XS5R-D426-@11-F Connectors on Both Ends (Y-Joint Plug/Socket) Wiring Diagram 45.5 15.0 4.6 dia. CN2 1 2 4 3 35.0 1 2 3 4 CN2 6 dia. 4 1 18.0 1 2 4 3 CN1 Blue marking 8.5 44.7 XS5R-D426-@10-F Connectors on One Cable End (Y-Joint Socket) 15.0 1 2 3 4 CN1 13.6 L (Cable length) Wiring Diagram 45.5 1 2 3 4 CN2 4.6 dia. CN2 1 2 4 3 1 2 4 3 Blue White Blue marking 13.6 Brown +20 50 -10 Wiring Diagram XS5R-D426-1 27 7 15 53 305 XS5R-D426-@ Y-Joint Plug/Socket without Cable (37) 1 2 3 4 CN1 8.5 CN1 L (Cable length) 1 2 4 3 Black 6 dia. 18.0 35.0 4 3 2 1 3 2 CN2 4 3 2 1 CN1 4 3 2 1 4.5 dia. CN2 CN0 XS5R-D426-5 CN2 4 3 2 1 CN1 4 3 2 1 24.5 4 3 2 1 18 2 1 4 3 12.5 CN1 4 3 2 1 CN0 CN0 58.3 Blue marking Ordering Information Cable Connector Connectors on both cable ends With cable Connector on one cable end With no cable Y-Joint Plug/Socket Cable length (m) 0.5 1 2 3 2 5 --- Model XS5R-D426-B11-F XS5R-D426-C11-F XS5R-D426-D11-F XS5R-D426-E11-F XS5R-D426-D10-F XS5R-D426-G10-F XS5R-D426-1 XS5R-D426-5 Standard pack quantity 10 5 10 Note: XS2G and XS5G Assembled Connectors with screw connections cannot be connected to both CN1 and CN2 at the same time. 134 Round Water-resistant Connectors (M12) XS5 4-Pin Panel-mount Connectors XS5P - Sockets TM Dimensions (Unit: mm) XS5P-D426-5 Front Panel-mounting Sockets for Rear Lock Nuts 2.8 17 18 PG9 M12 White Blue 500 2 3 18 14.6 dia. 1 20 4 103 (20) Brown Black 11.9 2.5 22.1 XS5P-D427-5 Rear Panel-mounting Sockets for Front Lock Nuts 18 PG9 M12 17 2.8 500 Blue White 2 20 3 13.9 dia. 1 18 4 103 10.5 22.1 (20) Black Brown 2.5 Panel Cutout Wiring and Wire Specifications +0.1 0 dia. 15.3 Wiring Pin number 1 2 3 4 Panel Cutout Dimension Panel thickness = 1 to 4 mm Note: 1. The panel cutout dimension is the same for Front-locking and Rear-locking Sockets. 2. Rotational positioning is not possible for connector rotation. Color Brown White Blue Black Wire Specifications Item Specification Nominal size Number of wires Configuration Wire diameter Standard outer diameter Specification UL1007 AWG20 21 0.18 1.8 Ordering Information Type With cable Lock Rear lock Front lock Cable length (m) 0.5 Model Standard pack, quantity XS5P-D426-5 10 XS5P-D427-5 Round Water-resistant Connectors (M12) XS5 135 XS5M - Plugs TM Dimensions (Unit: mm) XS5M-D426-5 Front Panel-mounting Plugs for Rear Lock Nuts 2.8 18 18 PG9 M12 White Brown 500 1 4 17 20 2 3 103 (20) Blue Black 10 2.8 22.8 XS5M-D427-5 Rear Panel-mounting Plugs for Front Lock Nuts 18 18 PG9 2.8 500 M12 White Brown 1 4 20 17 2 3 103 8 (20) Blue Black 2.8 22.8 Panel Cutout Wiring and Wire Specifications Wiring +0.1 0 dia. 15.3 Pin number 1 2 3 4 Panel Cutout Dimension Panel thickness = 1 to 4 mm Note: 1. The panel cutout dimension is the same for Front-locking and Rear-locking Sockets. 2. Rotational positioning is not possible for connector rotation. Color Brown White Blue Black Wire Specifications Item Specification Nominal size Number of wires Configuration Wire diameter Standard outer diameter Specification UL1007 AWG20 21 0.18 1.8 Ordering Information Type Lock With cable 136 Rear lock Front lock Cable length (m) XS5M-D426-5 0.5 Round Water-resistant Connectors (M12) Model XS5M-D427-5 XS5 Standard pack, quantity 10 Precautions Note: 1. See "XS5/XS2 - Assembly Tooling and Accessories" datasheet for information and precautions regarding assembly, tooling and accessories that are common to the XS5 and XS2 connectors, along with assembly details for the NEW IDC Field-wiring versions of the XS5C and XS5G connectors. 2. See "XS2" datasheet for specifics regarding those connectors Correct Use Connecting the XS5 Do not use the Connectors in an atmosphere or environment that exceeds the specifications. 1. Connecting the XS5 Plug and Socket Connector Connection and Disconnection * Align the projection on the plug cover with the polarity key on the socket, then insert the plug all the way in. * When connecting or disconnecting Connectors, be sure to hold the Connectors by hand. Polarity key Protrusion on cover aligns with polarity key. * Do not hold the cable when disconnecting Connectors. * When mating Connectors, be sure to insert the plug all the way to the back of the socket before attempting to lock the Connectors. * Do not use tools of any sort to mate the Connectors. Always use your hands. Pliers or other tools may damage the Connectors. * When mating the Connectors to XS2 or other M12 Connectors, tighten the lock by hand to a torque of 0.39 to 0.49 Nm. * Hold the knurled socket grip, then insert the projection on the plug into the groove of the socket. Wiring * Always confirm wiring diagrams before wiring sensors, limit switches, or other devices. * Lay the cables so that external force is not applied to the Connectors. Otherwise, the degree of protection (IP67) may not be achieved. Degree of Protection * The degree of protection of Connectors (IP67) is not for a fully watertight structure. Do not the Connectors underwater. * Do not step on or place any objects on the Connectors. Doing so may damage the Connectors. * Turn the knurled grips of the socket clockwise approximately 45 degrees in respect to the plug. A click will indicate that the Connectors are locked. The locking condition can also be confirmed by the alignment marks on the plug and socket. General Precautions * Do not pull excessively on the Connectors or cables. Do not install the Connectors or cables in any way that would place a load directly on the mating section or cable connections. Doing so can damage the Connectors or break the wires inside the cables. * Install the Connectors and cables where they will not be stepped on to prevent the wires inside the cables from being broken and to prevent the Connectors from being damaged. If the Connectors or cables must be installed where they might be stepped on, protect them with covers. * Refer to the specifications for your cables before bending the cables and do not bend them past their minimum bending radius. * If sensors or switches are not attached during installation, protect the mating surface of the Connector with a XS2Z-22 Waterproof Cover of XS2Z-14/15 Dust Cover. Alignment marks 2. Connecting the XS5 and XS2 * Align the projection on the plug cover with the polarity key on the socket, then insert the plug all the way in. * In the same way as when connecting two XS2 Connectors, screw the knurled grip in the clockwise direction. * Use your fingers to tighten the Connectors sufficiently. Round Water-resistant Connectors (M12) XS5 137 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X304-E-1c 07/13 Specifications subject to change without notice Round Water-resistant Connectors (M12) XS5 Printed in USA Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: XS5M-D427-5 XS5R-D426-5 XS5U-2222 XS5M-D426-5 XS5P-D426-5 XS5P-D427-5 XS5R-D426-1 XS5W-T422DM2-K XS5W-T422-CMC-K XS5W-T422-GMC-K XS5W-T422-AMC-K XS5W-T422-GM2-K XS5W-T422-BM2-K XS5W-T422-JMC-K XS5W-T422-BMC-K XS5W-T422-EM2-K XS5W-T422-DMC-K XS5W-T422-KM2-K XS5W-T422EMC-K XS5W-T422-JM2-K XS5P-T426-1 XS5W-T422-CM2-K XS5W-T422-AM2-K XS5W-T422-KMC-K XS5WT421-LMD-K XS5W-T421-TMD-K XS5W-D421-B81-F