Round Water-resistant Connectors (M12) XS5 123
Round Water-resistant Connectors (M12)
XS5
Water-resistant Smartclick Connectors
That Reduce Installation Work
•New - IDC Field-wiring versions of the XS5G and XS5C.
• A newly developed lock structure that maintains
compatibility with screw-type M12 connectors.
• Simply insert the Connectors, then turn them approximately
1/8 of a turn to lock.
• A positive click indicates locking.
• Features the same degree of protection (IP67) as
conventional, screw-type M12 connectors.
• Connector with cable are UL approved
TM
■Specifications
Note: 1. Only XS5C/G (IDC models)
2. Refer to product specifications for details.
■Recommended Cables
■Connection Combinations
Rated current 4A
Rated voltage 250 VDC
Contact resistance
(connector)
40 mΩmax.
(20 mV max., 100 mA max.)
Insulation resistance 1,000 MΩmin. (at 500 VDC)
Dielectric strength (connector) 1,500 VAC for 1 min. (leakage current: 1 mA max.)
Degree of protection IP67 (IEC60529)
Insertion tolerance 50 times min.
Lock strength Tensile: 100 N/15 s, Torsion: 1 N·m/15 s
Cable holding strength Tensile: 100 N/15 s, Torsion: 1 N·m/15 s (for cable diameter of 6 mm) (See note 2)
Lock operating force 0.1 N
·
m to 0.25 N
·
m
Ambient operating temperature range −25°Cto70°C
Number of pressure-weld repairs (See note 1) 10 times max. (Limited to the same external diameter and wire diameter.)
Cable outer diame-
ter (mm)
Core sizes
Crimping
models
Soldering
models
Screw-on
models IDC Models
8mm 7to8mm ——
0.18 to 0.75mm2
0.14 to 0.75 mm2
•Minimum Wire Diameter: 0.08mm
•Outer diameter of wire covering: 0.7 to 2.6 mm
•Sheath material: PVC, PE, PUR
•Material of wire covering: PVC, PE
7mm 6to8mm
6 mm 5 to 6 mm Two types of connectors
are available:
0.18 to 0.3mm2
0.5 to 0.75mm2
0.5 mm2max.
4mm 4to5mm
3mm 3to4mm
OMRON model No. Smartclick Plug Connectors M12 Plug Connectors
XS5H, XS5G, XS5M
XS5W (plug side)
XS5R (plug side)
XS2H, XS2G, XS2M
XS2W (plug side)
XS2R (plug side)
Smartclick Socket
Connectors
XS5F, XS5C, XS5P
XS5W (socket side)
XS5R, (socket side)
M12 Socket Connectors XS2F, XS2C, XS2P
XS2W (socket side)
XS2R (socket side)
Note: is a registered trademark of the OMRON Corporation.
:
Connected by Smartclick
TM
twisting.
: Connected by screwing.
TM
124 Round Water-resistant Connectors (M12) XS5
■Materials and Finish
Note: 1. See “XS5/XS2 - Assembly Tooling and Accessories” datasheet
for information regarding assembly, tooling and accessories
that are common to the XS5 and XS2 connectors
2. See “XS2” datasheet for specifics regarding those connectors
3. Only plug
4-Pin Connectors with Cable Attached
■XS5F - Socket on One Cable End
Dimensions (Unit: mm)
Note: The overmolding on the Oil-resistant Polyurethane Cable (XS5F-D42@-@80-P)is black, and the overmolding on the Fire-retardant, Robot Cable
(XS5F-D42@-@80-F) is warm gray.
Ordering Information
Note: 1. Ask your OMRON representative about other specifications. 2. XS5F-D42@models with -F are cRUus approved.
Item Model XS5F/H/W XS5R XS5M/P XS5C/G
(Crimping, Soldering)
XS5C/G
(Screw-on)
XS5C/G
(IDC models)
Contacts
Materials Phosphor bronze Phosphorbronze
or Brass Phosphor bronze Brass Phosphor bronze or
Brass Phosphor bronze
Finish Nickel base, 0.4-μm gold-plating
Nickel base, 0.15-μm
gold-plating
Fixtures Nickel-plated zinc alloy
Fixtures (Lock) (See note 3) SUS
Pin Block PBT resin (UL94V-0)
O-ring Rubber
Overmolding/Cover Soft PBT resin (UL94V-0) — PBT resin(UL94V-0)
Cable
Fire-retardant, robot cable UL AWM2464 CL3, 6-mm dia.,
4 cores ×AWG20 (0.08/110) —
Oil-resistant
polyurethane cable 6 dia.4 cores ×0.5 mm2(0.12/45) —
Seal Resin —Epoxy Resin
(UL94V-0) —
Power supply wires — UL 1007 AWG20 —
XS5F-D42@-@80-F Fire-retardant, Robot Cable
XS5F-D42@-@80-P Oil-resistant Polyurethane Cable
TM
6 dia.
40.7
L (Cable length)
50
30 5
M12
14.9 dia.
1
2
3
4
Blue
Black
Brown
White
Terminal No. Cable
Color of core sheath
6 dia.
25.3
28.3
L (Cable length)
50
30 5
Wiring Diagram for 4 Cores
Straight
Angled
Cable type Cable length L
(m)
Model Standard pack
quantity
Straight Angled
Fire-retardant,
robot cable
1XS5F-D421-C80-F XS5F-D422-C80-F 10
2XS5F-D421-D80-F XS5F-D422-D80-F
53 XS5F-D421-E80-F XS5F-D422-E80-F
5XS5F-D421-G80-F XS5F-D422-G80-F
10 XS5F-D421-J80-F XS5F-D422-J80-F 1
Oil-resistant
polyurethane cable
2XS5F-D421-D80-P XS5F-D422-D80-P 5
5XS5F-D421-G80-P XS5F-D422-G80-P
10 XS5F-D421-J80-P XS5F-D422-J80-P 1
Round Water-resistant Connectors (M12) XS5 125
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
1. Type
F: Connector connected to cable, socket on one cable end
2. AC/DC (Mating Section Form)
D: DC
3. Connector Poles
4: 4 poles
4. Contact Plating
2: 0.4-μm gold plating
5. Cable Connection Direction
1: Straight
2: Angled
6. Cable Length
A: 0.3 m G: 5 m
B: 0.5 m H: 7 m
C: 1 m J: 10 m
D: 2 m K: 15 m
E: 3 m L: 20 m
F: 4 m
7. Connections
8: ABrown, BWhite, CBlue, DBlack
(Numbers inside circles are terminal numbers.)
8. Connectors on One End/Both Ends
0: One end
9. Cable Specification
F: Fire-retardant, robot cable
P: Oil-resistant polyurethane cable
XS5F - D42@ - @80 - @
12345678 9
126 Round Water-resistant Connectors (M12) XS5
■XS5H - Plug on One Cable End
Dimensions (Unit: mm)
Note: The overmolding on the Oil-resistant Polyurethane Cable (XS5H-D42@-@80-P) is black, and the overmolding of the Fire-retardant, Robot Cable
(XS5H-D42@-@81-F) is warm gray
Ordering Information
Note: 1. Ask your OMRON representative about other specifications.
2. XS5H-D42@models with -F are cRUus approved.
Cable type Cable length L (m) Model Standard pack
quantity
Straight Angled
Fire-retardant,
robot cable
0.3 XS5H-D421-A80-F XS5H-D422-A80-F 10
1XS5H-D421-C80-F XS5H-D422-C80-F
2XS5H-D421-D80-F XS5H-D422-D80-F 5
5XS5H-D421-G80-F XS5H-D422-G80-F
Oil-resistant
polyurethane cable
0.3 XS5H-D421-A80-P XS5H-D422-A80-P 10
2XS5H-D421-D80-P XS5H-D422-D80-P 5
5XS5H-D421-G80-P XS5H-D422-G80-P
XS5H-D42@-@80-F Fire-retardant, Robot Cable
XS5H-D42@-@80-P Oil-resistant Polyurethane Cable
TM
44.7 6 dia.
L (Cable length)
50
30 5
1
2
3
4
Blue
Black
Brown
White
Terminal No. Cable
Color of core sheath
L (Cable length)
6 dia.
M12
50
30 5
32.3
25.3
Wiring Diagram for 4 Cores
Straight
Angled
Round Water-resistant Connectors (M12) XS5 127
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
1. Type
H: Connector connected to cable, plug on one cable end
2. AC/DC (Mating Section Form)
D: DC
3. Connector Poles
4: 4 poles
4. Contact Plating
2: 0.4-μm gold plating
5. Cable Connection Direction
1: Straight
2: Angled
6. Cable Length
A: 0.3 m G: 5 m
B: 0.5 m H: 7 m
C: 1 m J: 10 m
D: 2 m K: 15 m
E: 3 m L: 20 m
F: 4 m
7. Connections
8: ABrown, BWhite, CBlue, DBlack
(Numbers inside circles are terminal numbers)
8. Connectors on One End/Both Ends
0: One end
9. Cable Specifications
F: Fire-retardant, robot cable
P: Oil-resistant polyurethane cable
XS5H - D42@ - @80 - @
12345678 9
128 Round Water-resistant Connectors (M12) XS5
■XS5W - Socket and Plug on Cable Ends
Dimensions (Unit: mm)
Note: The overmolding on the Oil-resistant Polyerethane Cable (XS5W-D42@-@81-P ) is black, and the overmolding of the Fire-retardant, Robot
Cable (XS5W-D42@-@81-F) is warm gray.
XS5W-D42@-@81-F Fire-retardant, Robot Cable
XS5W-D42@-@81-P Oil-resistant Polyurethane Cable
TM
40.7
L (Cable length)
44.7
14.9 dia.14.9 dia.
6 dia.
M12
M12
L (Cable length)
32.3
28.3 6 dia.
M12
L (Cable length)
32.3
40.7
6 dia.
M12
1
2
3
4
1
2
3
4
Terminal No.
Brown
White
Blue
Black
Cable color of
core sheath
L (Cable length)
28.3
44.7
6 dia. M12
Wiring Diagram for 4 Cores
Straight/straight
Angled/angled
Straight/angled
Angled/straight
Round Water-resistant Connectors (M12) XS5 129
Ordering Information
Note: 1. Ask your OMRON representative about other specifications.
2. XS5W-D42@models with -F are cRUus approved.
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
1. Type
W:
Connectors connected to cable, socket and plug on cable ends
2. AC/DC (Mating Section Form)
D: DC
3. Connector Poles
4: 4 poles
4. Contact Plating
2: 0.4-μm gold plating
5. Cable Connection Directions
1: Straight/straight
2: Angled/angled
3: Straight (XS5F)/angled (XS5H)
4: Angled (XS5F)/straight (XS5H)
6. Cable Length
A: 0.3 m G: 5 m
B: 0.5 m H: 7 m
C: 1 m J: 10 m
D: 2 m K: 15 m
E: 3 m L: 20 m
F: 4 m
7. Connections
8: ABrown, BWhite, CBlue, DBlack
(Numbers inside circles are terminal numbers.)
8. Connectors on One End/Both Ends
1: Both ends
9. Cable Specifications
F: Fire-retardant, robot cable
P: Oil-resistant polyurethane cable
Cable type Cable length L
(m)
Model Standard pack
quantity
Straight/straight Angled/angled
Fire-retardant,
robot cable
1XS5W-D421-C81-F — 10
2XS5W-D421-D81-F XS5W-D422-D81-F
53 XS5W-D421-E81-F —
5XS5W-D421-G81-F XS5W-D422-G81-F
10 XS5W-D421-J81-F — 1
Oil-resistant
polyurethane cable
2XS5W-D421-D81-P — 5
5XS5W-D421-G81-P —
10 XS5W-D421-J81-P — 1
Cable type Cable length L
(m)
Model Standard pack
quantity
Straight/angled Angled/straight
Fire-retardant
robot cable
2XS5W-D423-D81-F XS5W-D424-D81-F 5
5XS5W-D423-G81-F XS5W-D424-G81-F
XS5W - D42@ - @81 - @
123456789
130 Round Water-resistant Connectors (M12) XS5
4-Pin and 5-Pin Assembly Connector
■XS5C Sockets
Dimensions (Unit: mm)
TM
54.9
20 dia. 14.9 dia. 16 dia.
62.4
54.4
17.5 dia.14.9 dia.
M12
XS5C-D@S@(Screw-on Connectors, Applicable Cable Outer Diameter: 7 or 8mm)
Straight Connectors
XS5C-D@S@(Screw-on Connectors, Applicable Cable Outer Diameter: 3, 4, or 6mm)
Straight Connectors
M12
31.8
14.9 dia.
23
M12
43.4
14.9 dia. 14.2 dia.
XS5C-D4C@(Crimping Model)
XS5C-D42@(Soldering Model)
Straight Connectors
XS5C-D4C@(Soldering Model)
XS5C-D42@ (Soldering Model)
Angled Connectors
54.9
20 dia. 14.9 dia. 14 dia.
14.9 dia.
35.9
39.6
14 dia.
20 dia.
XS5C-D@S@(Screw-on Connectors)
Angled Connectors
XS5C-D418 (IDC Model)
Straight Connectors
Round Water-resistant Connectors (M12) XS5 131
Ordering Information
Note: 4 pole XS5C models are cRUus approved. IDC version (XS5C-D418) is pending approval.
■XS5U
(Crimping pin for XS5C)
Dimensions (Unit: mm)
Ordering Information
No. of Poles Connection
Method
Suitable cable dia.
(mm)
Model Standard pack
quantity
Straight Angled
4
IDC 3to8mm XS5C-D418 —
1
Crimping
6mm(5to6) XS5C-D4C1 XS5C-D4C2
4mm(4to5) XS5C-D4C3 XS5C-D4C4
3mm(3to4) XS5C-D4C5 XS5C-D4C6
Soldering
6mm(5to6) XS5C-D421 XS5C-D422
4mm(4to5) XS5C-D423 XS5C-D424
3mm(3to4) XS5C-D425 XS5C-D426
Screw-on
6mm(5to6) XS5C-D4S1 XS5C-D4S2
4mm(4to5) XS5C-D4S3 XS5C-D4S4
3mm(3to4) XS5C-D4S5 XS5C-D4S6
8mm(7to8) XS5C-D4S7 —
7mm(6to7) XS5C-D4S9 —
5 Screw-on
6mm(5to6) XS5C-D5S1 —
4mm(4to5) XS5C-D5S3 —
3mm(3to4) XS5C-D5S5 —
8mm(7to8) XS5C-D5S7 —
7mm(6to7) XS5C-D5S9 —
Suitable core size (mm2) Model Standard Pack
Quantity
0.18 to 0.3 XS5U-2221 100
0.5 to 0.75 XS5U-2222
Slit
2.3 dia.2 dia.
C dia.
1.5
B
A
Dimensions
Model Suitable core
size (mm2)
Dimension (mm) No. of
slits
ABC
XS5U-2221 0.18 to 0.3
(22 to 24 AWG) 16.7 6.1 0.8 1
XS5U-2222 0.5 to 0.7
(18 to 20 AWG) 16.8 6.2 1.3 0
XS5U-222@
Socket Pin
Note: 1. A special tool must be used for crimping. For details, refer to the “XS5/XS2 - Assembly Tooling and Accessories” datasheet.
2. AWG size is based on UL1007 wire.
132 Round Water-resistant Connectors (M12) XS5
■XS5G - Plugs
Dimensions (Unit: mm)
TM
XS5G-D@S@(Screw-on Connectors, Applicable Cable Outer Diameter: 3, 4, or 6mm)
Straight Connectors
37.7
14.9 dia.
23
M12
14.9 dia.
49.3
14.2 dia.
M12
58.7
16 dia.20 dia.
14.9 dia.
XS5G-D4C@(Crimping Model)
XS5G-D42@(Soldering Model)
Straight Connectors
XS5G-D42@(Soldering Model)
Angled Connectors
XS5G-D@S@(Screw-on Connectors, Applicable Cable Outer Diameter: 7 or 8mm)
Straight Connectors
58.7
14 dia.20 dia. 14.9 dia.
39.7
39.6
20 dia.
14 dia.
XS5G-D@S@(Screw-on Connectors)
Angled Connectors
66
58
17.5 dia.14.9 dia.
M12
XS5G-D418 (IDC Model)
Straight Connectors
Round Water-resistant Connectors (M12) XS5 133
Ordering Information
Note: 1. XS5G Screw-on Plugs cannot be connected side-by-side to the CN1 and CN2 connectors of XS2R or XS5R Y-Joint Sockets / Plugs
2. 4 pole XS5G models are cRUus approved. IDC version (XS5G-D418) is pending approval.
■XS5U
(Crimping pin for XS5G)
Dimensions (Unit: mm)
Ordering Information
No. of Poles Connection
Method
Suitable cable dia.
(mm)
Model Standard pack
quantity
Straight Angled
4
IDC 3to8mm XS5G-D418 —
1
Crimping
6mm(5to6) XS5G-D4C1 —
4mm(4to5) XS5G-D4C3 —
3mm(3to4) XS5G-D4C5 —
Soldering
6mm(5to6) XS5G-D421 XS5G-D422
4mm(4to5) XS5G-D423 XS5G-D424
3mm(3to4) XS5G-D425 XS5G-D426
Screw-on
6mm(5to6) XS5G-D4S1 XS5G-D4S2
4mm(4to5) XS5G-D4S3 XS5G-D4S4
3mm(3to4) XS5G-D4S5 XS5G-D4S6
8mm(7to8) XS5G-D4S7 —
7mm(6to7) XS5G-D4S9 —
5 Screw-on
6mm(5to6) XS5G-D5S1 —
4mm(4to5) XS5G-D5S3 —
3mm(3to4) XS5G-D5S5 —
8mm(7to8) XS5G-D5S7 —
7mm(6to7) XS5G-D5S9 —
Suitable core size (mm2) Model Standard Pack
Quantity
0.18 to 0.3 XS5U-3121 100
0.5 to 0.75 XS5U-3122
2.3 dia.2 dia.
C dia.
1.5
1 dia.
B
Slit
A
Dimensions
Model Suitable core
size (mm2)
Dimension (mm) No. of
slits
ABC
XS5U-3121 0.18 to 0.3
(22 to 24 AWG) 22.6 6.1 0.8 1
XS5U-3122 0.5 to 0.7
(18 to 20 AWG) 22.7 6.2 1.3 0
XS5U-312@
Plug Pin
Note: 1. A special tool must be used for crimping. For details, refer to the “XS5/XS2 - Assembly Tooling and Accessories” datasheet.
2. AWG size is based on UL1007 wire.
134 Round Water-resistant Connectors (M12) XS5
4-Pin Y-Joint Plug/Socket Connectors
■XS5R
Dimensions (Unit: mm)
Ordering Information
Note: XS2G and XS5G Assembled Connectors with screw connections cannot be connected to both CN1 and CN2 at the same time.
TM
XS5R-D426-@11-F
Connectors on Both Ends (Y-Joint Plug/Socket)
1
2
3
44
3
2
1
1
2
3
4
CN2
CN1
1
43
2
1
43
2
1
43
2
1
43
2
1
43
2
1
43
2
1
43
2
1
43
2
45.5
4.6 dia.
18.0
35.0
CN1
CN2
15.0
Blue marking 8.5
13.6
L (Cable length)
6 dia.
44.7
Wiring Diagram
XS5R-D426-@10-F
Connectors on One Cable End (Y-Joint Socket)
1
43
2
1
43
2
1
43
2
1
43
2
18.0
15.0
35.0
CN1
CN2
Blue marking
45.5
4.6 dia.
30±5
50+20
−10
5±3
8.5 13.6
L (Cable length)
6 dia.
1
2
3
4
1
2
3
4
Black
Blue
White
Brown
CN2
CN1
Wiring Diagram
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
CN2
CN1
CN0
CN2
CN1 CN0
1
43
2
1
43
2
58.3
27
4.5 dia.
CN2
(37) 18
15
CN1
CN0
Blue marking
7
24.5
12.5
Wiring Diagram
XS5R-D426-1 XS5R-D426-5
XS5R-D426-@
Y-Joint Plug/Socket without Cable
Cable Connector Cable length (m) Model Standard pack quantity
With cable
Connectors on both cable
ends
0.5 XS5R-D426-B11-F 10
1XS5R-D426-C11-F
2XS5R-D426-D11-F
5
3XS5R-D426-E11-F
Connector on one cable end 2XS5R-D426-D10-F
5XS5R-D426-G10-F
With no cable Y-Joint Plug/Socket --- XS5R-D426-1 10
XS5R-D426-5
Round Water-resistant Connectors (M12) XS5 135
4-Pin Panel-mount Connectors
■XS5P - Sockets
Dimensions (Unit: mm)
Panel Cutout
Note: 1. The panel cutout dimension is the same for Front-locking
and Rear-locking Sockets.
2. Rotational positioning is not possible for connector rotation.
Wiring and Wire Specifications
Wiring
Wire Specifications
Ordering Information
TM
2
3
4
1
20
White
Brown
Black
Blue
18
(20)
500
22.1
11.9
2.5
14.6 dia.
PG9
2.8
M12
17
18
10
±3
XS5P-D426-5
Front Panel-mounting Sockets for Rear Lock Nuts
2
3
4
1
M12 PG9
(20)
500
22.1
18
20
White
Blue
Brown
Black
17
18
10.5 2.5
10±3
13.9 dia.
2.8
XS5P-D427-5
Rear Panel-mounting Sockets for Front Lock Nuts
Panel Cutout Dimension
Panel thickness = 1 to 4 mm
15.3+0.1
0 dia.
Pin number Color
1 Brown
2 White
3 Blue
4 Black
Item Specification
Specification UL1007
Nominal size AWG20
Configuration
Number of wires 21
Wire diameter 0.18
Standard outer diameter 1.8
Type Lock Cable length (m) Model Standard pack,
quantity
With cable Rear lock 0.5 XS5P-D426-5 10
Front lock XS5P-D427-5
136 Round Water-resistant Connectors (M12) XS5
■XS5M - Plugs
Dimensions (Unit: mm)
Panel Cutout
Note: 1. The panel cutout dimension is the same for Front-locking
and Rear-locking Sockets.
2. Rotational positioning is not possible for connector rotation.
Wiring and Wire Specifications
Wiring
Wire Specifications
Ordering Information
TM
XS5M-D426-5
Front Panel-mounting Plugs for Rear Lock Nuts
2.8
M12 PG9
500
22.8
18
17
White
Brown
Blue
Black
18
20
10
2.8
10±3(20)
2
3
4
1
1
4
3
2
PG9
M12
(20)
500
22.8
18
20
White
Brown
Blue
Black
18
17
82.8
10±3
2.8
XS5M-D427-5
Rear Panel-mounting Plugs for Front Lock Nuts
15.3+0.1
0 dia.
Panel Cutout Dimension
Panel thickness = 1 to 4 mm
Pin number Color
1 Brown
2 White
3 Blue
4 Black
Item Specification
Specification UL1007
Nominal size AWG20
Configuration
Number of wires 21
Wire diameter 0.18
Standard outer diameter 1.8
Type Lock Cable length (m) Model Standard pack,
quantity
With cable Rear lock 0.5 XS5M-D426-5 10
Front lock XS5M-D427-5
Round Water-resistant Connectors (M12) XS5 137
Precautions
Note: 1. See “XS5/XS2 - Assembly Tooling and Accessories” datasheet for information and precautions regarding assembly, tooling and accessories that are
common to the XS5 and XS2 connectors, along with assembly details for the NEW IDC Field-wiring versions of the XS5C and XS5G connectors.
2. See “XS2” datasheet for specifics regarding those connectors
■Correct Use
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
Connector Connection and Disconnection
•
When connecting or disconnecting Connectors, be sure to hold the
Connectors by han
d.
•Do not hold the cable when disconnecting Connectors.
•When mating Connectors, be sure to insert the plug all the way to
the back of the socket before attempting to lock the Connectors.
•Do not use tools of any sort to mate the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.
•When mating the Connectors to XS2 or other M12 Connectors,
tighten the lock by hand to a torque of 0.39 to 0.49 N⋅m.
Wiring
•Always confirm wiring diagrams before wiring sensors, limit
switches, or other devices.
•Lay the cables so that external force is not applied to the
Connectors. Otherwise, the degree of protection (IP67) may not
be achieved.
Degree of Protection
•The degree of protection of Connectors (IP67) is not for a fully
watertight structure. Do not the Connectors underwater.
•
Do not step on or place any objects on the Connectors. Doing so
may damage the Connectors
.
■General Precautions
•
Do not pull excessively on the Connectors or cables. Do not instal
l
the Connectors or cables in any way that would place a load
directly on the mating section or cable
connections. Doing so can
damage the Connectors or break the wires inside the cables.
•Install the Connectors and cables where they will not be stepped
on to prevent the wires inside
the cables from being broken and to
prevent the Connectors from being
damaged. If the Connectors or
cables must be installed where they might be stepped on, protect
them with covers.
•Refer to the specifications for your cables before bending the
cables and do not bend them past their minimum bending radius.
•If sensors or switches are not
attached during installation, protect
the mating surface of the Connector with a XS2Z-22 Waterproof
Cover of XS2Z-14/15 Dust Cover.
■Connecting the XS5
1. Connecting the XS5 Plug and Socket
•Align the projection on the plug cover with the polarity key on the
socket, then insert the plug all the way in.
•
Hold the knurled socket grip, then insert the projection on the plug
into the groove of the socket.
•Turn the knurled grips of the socket clockwise approximately
45 degrees in respect to the plug. A click will indicate that the
Connectors are locked. The locking condition can also be
confirmed by the alignment marks on the plug and socket.
2. Connecting the XS5 and XS2
•Align the projection on the plug cover with the polarity key on the
socket, then insert the plug all the way in.
•
In the same way as when connecting two XS2 Connectors, screw
the knurled grip in the clockwise direction.
•Use your fingers to tighten the Connectors sufficiently.
Polarity key
Protrusion on
cover aligns with
polarity key.
Alignment marks
Round Water-resistant Connectors (M12) XS5
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Cat. No. X304-E-1c Printed in USA
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
07/13 Specifications subject to change without notice
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
XS5M-D427-5 XS5R-D426-5 XS5U-2222 XS5M-D426-5 XS5P-D426-5 XS5P-D427-5 XS5R-D426-1 XS5W-T422-
DM2-K XS5W-T422-CMC-K XS5W-T422-GMC-K XS5W-T422-AMC-K XS5W-T422-GM2-K XS5W-T422-BM2-K
XS5W-T422-JMC-K XS5W-T422-BMC-K XS5W-T422-EM2-K XS5W-T422-DMC-K XS5W-T422-KM2-K XS5W-T422-
EMC-K XS5W-T422-JM2-K XS5P-T426-1 XS5W-T422-CM2-K XS5W-T422-AM2-K XS5W-T422-KMC-K XS5W-
T421-LMD-K XS5W-T421-TMD-K XS5W-D421-B81-F
